[PATCH] Remove testing 4xx enet PHY setup

Signed-off-by: Stefan Roese <sr@denx.de>

diff --git a/cpu/ppc4xx/4xx_enet.c b/cpu/ppc4xx/4xx_enet.c
index 8c517ba..7a2483c 100644 (file)
--- a/cpu/ppc4xx/4xx_enet.c
+++ b/cpu/ppc4xx/4xx_enet.c
@@ -560,22 +560,7 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis)
         * otherwise, just check the speeds & feeds
         */
        if (hw_p->first_init == 0) {
-#if defined(CONFIG_88E1111_CLK_DELAY)
-               /*
-                * On some boards (e.g. ALPR) the Marvell 88E1111 PHY needs
-                * the "RGMII transmit timing control" and "RGMII receive
-                * timing control" bits set, so that Gbit communication works
-                * without problems.
-                * Also set the "Transmitter disable" to 1 to enable the
-                * transmitter.
-                * After setting these bits a soft-reset must occur for this
-                * change to become active.
-                */
-               miiphy_read (dev->name, reg, 0x14, &reg_short);
-               reg_short |= (1 << 7) | (1 << 1) | (1 << 0);
-               miiphy_write (dev->name, reg, 0x14, reg_short);
-#endif
-#if defined(CONFIG_M88E1111_PHY) /* test-only: merge with CONFIG_88E1111_CLK_DELAY !!! */
+#if defined(CONFIG_M88E1111_PHY)
                miiphy_write (dev->name, reg, 0x14, 0x0ce3);
                miiphy_write (dev->name, reg, 0x18, 0x4101);
                miiphy_write (dev->name, reg, 0x09, 0x0e00);

diff --git a/include/configs/alpr.h b/include/configs/alpr.h
index 60da820..bbe6b76 100644 (file)
--- a/include/configs/alpr.h
+++ b/include/configs/alpr.h
@@ -187,7 +187,7 @@
 #define CONFIG_HAS_ETH2
 #define CONFIG_HAS_ETH3
 #define CONFIG_PHY_RESET       1       /* reset phy upon startup       */
-#define CONFIG_88E1111_CLK_DELAY 1     /* set CLK delay on ALPR        */
+#define CONFIG_M88E1111_PHY    1       /* needed for PHY specific setup*/
 #define CONFIG_PHY_GIGE                1       /* Include GbE speed/duplex detection */
 #define CFG_RX_ETH_BUFFER      32      /* Number of ethernet rx buffers & descriptors */