+++ /dev/null
-/*
- * Copyright (c) 2010 Broadcom Corporation
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
- * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
- * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
- * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#ifndef _SBSDIO_H
-#define _SBSDIO_H
-
-#define SBSDIO_NUM_FUNCTION 3 /* as of sdiod rev 0, supports 3 functions */
-
-/* function 1 miscellaneous registers */
-#define SBSDIO_SPROM_CS 0x10000 /* sprom command and status */
-#define SBSDIO_SPROM_INFO 0x10001 /* sprom info register */
-#define SBSDIO_SPROM_DATA_LOW 0x10002 /* sprom indirect access data byte 0 */
-#define SBSDIO_SPROM_DATA_HIGH 0x10003 /* sprom indirect access data byte 1 */
-#define SBSDIO_SPROM_ADDR_LOW 0x10004 /* sprom indirect access addr byte 0 */
-#define SBSDIO_SPROM_ADDR_HIGH 0x10005 /* sprom indirect access addr byte 0 */
-#define SBSDIO_CHIP_CTRL_DATA 0x10006 /* xtal_pu (gpio) output */
-#define SBSDIO_CHIP_CTRL_EN 0x10007 /* xtal_pu (gpio) enable */
-#define SBSDIO_WATERMARK 0x10008 /* rev < 7, watermark for sdio device */
-#define SBSDIO_DEVICE_CTL 0x10009 /* control busy signal generation */
-
-/* registers introduced in rev 8, some content (mask/bits) defs in sbsdpcmdev.h */
-#define SBSDIO_FUNC1_SBADDRLOW 0x1000A /* SB Address Window Low (b15) */
-#define SBSDIO_FUNC1_SBADDRMID 0x1000B /* SB Address Window Mid (b23:b16) */
-#define SBSDIO_FUNC1_SBADDRHIGH 0x1000C /* SB Address Window High (b31:b24) */
-#define SBSDIO_FUNC1_FRAMECTRL 0x1000D /* Frame Control (frame term/abort) */
-#define SBSDIO_FUNC1_CHIPCLKCSR 0x1000E /* ChipClockCSR (ALP/HT ctl/status) */
-#define SBSDIO_FUNC1_SDIOPULLUP 0x1000F /* SdioPullUp (on cmd, d0-d2) */
-#define SBSDIO_FUNC1_WFRAMEBCLO 0x10019 /* Write Frame Byte Count Low */
-#define SBSDIO_FUNC1_WFRAMEBCHI 0x1001A /* Write Frame Byte Count High */
-#define SBSDIO_FUNC1_RFRAMEBCLO 0x1001B /* Read Frame Byte Count Low */
-#define SBSDIO_FUNC1_RFRAMEBCHI 0x1001C /* Read Frame Byte Count High */
-
-#define SBSDIO_FUNC1_MISC_REG_START 0x10000 /* f1 misc register start */
-#define SBSDIO_FUNC1_MISC_REG_LIMIT 0x1001C /* f1 misc register end */
-
-/* SBSDIO_SPROM_CS */
-#define SBSDIO_SPROM_IDLE 0
-#define SBSDIO_SPROM_WRITE 1
-#define SBSDIO_SPROM_READ 2
-#define SBSDIO_SPROM_WEN 4
-#define SBSDIO_SPROM_WDS 7
-#define SBSDIO_SPROM_DONE 8
-
-/* SBSDIO_SPROM_INFO */
-#define SROM_SZ_MASK 0x03 /* SROM size, 1: 4k, 2: 16k */
-#define SROM_BLANK 0x04 /* depreciated in corerev 6 */
-#define SROM_OTP 0x80 /* OTP present */
-
-/* SBSDIO_CHIP_CTRL */
-#define SBSDIO_CHIP_CTRL_XTAL 0x01 /* or'd with onchip xtal_pu,
- * 1: power on oscillator
- * (for 4318 only)
- */
-/* SBSDIO_WATERMARK */
-#define SBSDIO_WATERMARK_MASK 0x7f /* number of words - 1 for sd device
- * to wait before sending data to host
- */
-
-/* SBSDIO_DEVICE_CTL */
-#define SBSDIO_DEVCTL_SETBUSY 0x01 /* 1: device will assert busy signal when
- * receiving CMD53
- */
-#define SBSDIO_DEVCTL_SPI_INTR_SYNC 0x02 /* 1: assertion of sdio interrupt is
- * synchronous to the sdio clock
- */
-#define SBSDIO_DEVCTL_CA_INT_ONLY 0x04 /* 1: mask all interrupts to host
- * except the chipActive (rev 8)
- */
-#define SBSDIO_DEVCTL_PADS_ISO 0x08 /* 1: isolate internal sdio signals, put
- * external pads in tri-state; requires
- * sdio bus power cycle to clear (rev 9)
- */
-#define SBSDIO_DEVCTL_SB_RST_CTL 0x30 /* Force SD->SB reset mapping (rev 11) */
-#define SBSDIO_DEVCTL_RST_CORECTL 0x00 /* Determined by CoreControl bit */
-#define SBSDIO_DEVCTL_RST_BPRESET 0x10 /* Force backplane reset */
-#define SBSDIO_DEVCTL_RST_NOBPRESET 0x20 /* Force no backplane reset */
-
-/* SBSDIO_FUNC1_CHIPCLKCSR */
-#define SBSDIO_FORCE_ALP 0x01 /* Force ALP request to backplane */
-#define SBSDIO_FORCE_HT 0x02 /* Force HT request to backplane */
-#define SBSDIO_FORCE_ILP 0x04 /* Force ILP request to backplane */
-#define SBSDIO_ALP_AVAIL_REQ 0x08 /* Make ALP ready (power up xtal) */
-#define SBSDIO_HT_AVAIL_REQ 0x10 /* Make HT ready (power up PLL) */
-#define SBSDIO_FORCE_HW_CLKREQ_OFF 0x20 /* Squelch clock requests from HW */
-#define SBSDIO_ALP_AVAIL 0x40 /* Status: ALP is ready */
-#define SBSDIO_HT_AVAIL 0x80 /* Status: HT is ready */
-/* In rev8, actual avail bits followed original docs */
-#define SBSDIO_Rev8_HT_AVAIL 0x40
-#define SBSDIO_Rev8_ALP_AVAIL 0x80
-
-#define SBSDIO_AVBITS (SBSDIO_HT_AVAIL | SBSDIO_ALP_AVAIL)
-#define SBSDIO_ALPAV(regval) ((regval) & SBSDIO_AVBITS)
-#define SBSDIO_HTAV(regval) (((regval) & SBSDIO_AVBITS) == SBSDIO_AVBITS)
-#define SBSDIO_ALPONLY(regval) (SBSDIO_ALPAV(regval) && !SBSDIO_HTAV(regval))
-#define SBSDIO_CLKAV(regval, alponly) (SBSDIO_ALPAV(regval) && \
- (alponly ? 1 : SBSDIO_HTAV(regval)))
-
-/* SBSDIO_FUNC1_SDIOPULLUP */
-#define SBSDIO_PULLUP_D0 0x01 /* Enable D0/MISO pullup */
-#define SBSDIO_PULLUP_D1 0x02 /* Enable D1/INT# pullup */
-#define SBSDIO_PULLUP_D2 0x04 /* Enable D2 pullup */
-#define SBSDIO_PULLUP_CMD 0x08 /* Enable CMD/MOSI pullup */
-#define SBSDIO_PULLUP_ALL 0x0f /* All valid bits */
-
-/* function 1 OCP space */
-#define SBSDIO_SB_OFT_ADDR_MASK 0x07FFF /* sb offset addr is <= 15 bits, 32k */
-#define SBSDIO_SB_OFT_ADDR_LIMIT 0x08000
-#define SBSDIO_SB_ACCESS_2_4B_FLAG 0x08000 /* with b15, maps to 32-bit SB access */
-
-/* some duplication with sbsdpcmdev.h here */
-/* valid bits in SBSDIO_FUNC1_SBADDRxxx regs */
-#define SBSDIO_SBADDRLOW_MASK 0x80 /* Valid bits in SBADDRLOW */
-#define SBSDIO_SBADDRMID_MASK 0xff /* Valid bits in SBADDRMID */
-#define SBSDIO_SBADDRHIGH_MASK 0xffU /* Valid bits in SBADDRHIGH */
-#define SBSDIO_SBWINDOW_MASK 0xffff8000 /* Address bits from SBADDR regs */
-
-/* direct(mapped) cis space */
-#define SBSDIO_CIS_BASE_COMMON 0x1000 /* MAPPED common CIS address */
-#define SBSDIO_CIS_SIZE_LIMIT 0x200 /* maximum bytes in one CIS */
-#define SBSDIO_OTP_CIS_SIZE_LIMIT 0x078 /* maximum bytes OTP CIS */
-
-#define SBSDIO_CIS_OFT_ADDR_MASK 0x1FFFF /* cis offset addr is < 17 bits */
-
-#define SBSDIO_CIS_MANFID_TUPLE_LEN 6 /* manfid tuple length, include tuple,
- * link bytes
- */
-
-/* indirect cis access (in sprom) */
-#define SBSDIO_SPROM_CIS_OFFSET 0x8 /* 8 control bytes first, CIS starts from
- * 8th byte
- */
-
-#define SBSDIO_BYTEMODE_DATALEN_MAX 64 /* sdio byte mode: maximum length of one
- * data command
- */
-
-#define SBSDIO_CORE_ADDR_MASK 0x1FFFF /* sdio core function one address mask */
-
-/* corecontrol */
-#define CC_CISRDY (1 << 0) /* CIS Ready */
-#define CC_BPRESEN (1 << 1) /* CCCR RES signal */
-#define CC_F2RDY (1 << 2) /* set CCCR IOR2 bit */
-#define CC_CLRPADSISO (1 << 3) /* clear SDIO pads isolation */
-#define CC_XMTDATAAVAIL_MODE (1 << 4)
-#define CC_XMTDATAAVAIL_CTRL (1 << 5)
-
-/* corestatus */
-#define CS_PCMCIAMODE (1 << 0) /* Device Mode; 0=SDIO, 1=PCMCIA */
-#define CS_SMARTDEV (1 << 1) /* 1=smartDev enabled */
-#define CS_F2ENABLED (1 << 2) /* 1=host has enabled the device */
-
-#define PCMCIA_MES_PA_MASK 0x7fff /* PCMCIA Message Portal Address Mask */
-#define PCMCIA_MES_PM_MASK 0x7fff /* PCMCIA Message Portal Mask Mask */
-#define PCMCIA_WFBC_MASK 0xffff /* PCMCIA Write Frame Byte Count Mask */
-#define PCMCIA_UT_MASK 0x07ff /* PCMCIA Underflow Timer Mask */
-
-/* intstatus */
-#define I_SMB_SW0 (1 << 0) /* To SB Mail S/W interrupt 0 */
-#define I_SMB_SW1 (1 << 1) /* To SB Mail S/W interrupt 1 */
-#define I_SMB_SW2 (1 << 2) /* To SB Mail S/W interrupt 2 */
-#define I_SMB_SW3 (1 << 3) /* To SB Mail S/W interrupt 3 */
-#define I_SMB_SW_MASK 0x0000000f /* To SB Mail S/W interrupts mask */
-#define I_SMB_SW_SHIFT 0 /* To SB Mail S/W interrupts shift */
-#define I_HMB_SW0 (1 << 4) /* To Host Mail S/W interrupt 0 */
-#define I_HMB_SW1 (1 << 5) /* To Host Mail S/W interrupt 1 */
-#define I_HMB_SW2 (1 << 6) /* To Host Mail S/W interrupt 2 */
-#define I_HMB_SW3 (1 << 7) /* To Host Mail S/W interrupt 3 */
-#define I_HMB_SW_MASK 0x000000f0 /* To Host Mail S/W interrupts mask */
-#define I_HMB_SW_SHIFT 4 /* To Host Mail S/W interrupts shift */
-#define I_WR_OOSYNC (1 << 8) /* Write Frame Out Of Sync */
-#define I_RD_OOSYNC (1 << 9) /* Read Frame Out Of Sync */
-#define I_PC (1 << 10) /* descriptor error */
-#define I_PD (1 << 11) /* data error */
-#define I_DE (1 << 12) /* Descriptor protocol Error */
-#define I_RU (1 << 13) /* Receive descriptor Underflow */
-#define I_RO (1 << 14) /* Receive fifo Overflow */
-#define I_XU (1 << 15) /* Transmit fifo Underflow */
-#define I_RI (1 << 16) /* Receive Interrupt */
-#define I_BUSPWR (1 << 17) /* SDIO Bus Power Change (rev 9) */
-#define I_XMTDATA_AVAIL (1 << 23) /* bits in fifo */
-#define I_XI (1 << 24) /* Transmit Interrupt */
-#define I_RF_TERM (1 << 25) /* Read Frame Terminate */
-#define I_WF_TERM (1 << 26) /* Write Frame Terminate */
-#define I_PCMCIA_XU (1 << 27) /* PCMCIA Transmit FIFO Underflow */
-#define I_SBINT (1 << 28) /* sbintstatus Interrupt */
-#define I_CHIPACTIVE (1 << 29) /* chip from doze to active state */
-#define I_SRESET (1 << 30) /* CCCR RES interrupt */
-#define I_IOE2 (1U << 31) /* CCCR IOE2 Bit Changed */
-#define I_ERRORS (I_PC | I_PD | I_DE | I_RU | I_RO | I_XU)
-#define I_DMA (I_RI | I_XI | I_ERRORS)
-
-/* sbintstatus */
-#define I_SB_SERR (1 << 8) /* Backplane SError (write) */
-#define I_SB_RESPERR (1 << 9) /* Backplane Response Error (read) */
-#define I_SB_SPROMERR (1 << 10) /* Error accessing the sprom */
-
-/* sdioaccess */
-#define SDA_DATA_MASK 0x000000ff /* Read/Write Data Mask */
-#define SDA_ADDR_MASK 0x000fff00 /* Read/Write Address Mask */
-#define SDA_ADDR_SHIFT 8 /* Read/Write Address Shift */
-#define SDA_WRITE 0x01000000 /* Write bit */
-#define SDA_READ 0x00000000 /* Write bit cleared for Read */
-#define SDA_BUSY 0x80000000 /* Busy bit */
-
-/* sdioaccess-accessible register address spaces */
-#define SDA_CCCR_SPACE 0x000 /* CCCR register space */
-#define SDA_F1_FBR_SPACE 0x100 /* F1 FBR register space */
-#define SDA_F2_FBR_SPACE 0x200 /* F2 FBR register space */
-#define SDA_F1_REG_SPACE 0x300 /* F1 core-specific register space */
-
-/* SDA_F1_REG_SPACE sdioaccess-accessible F1 reg space register offsets */
-#define SDA_CHIPCONTROLDATA 0x006 /* ChipControlData */
-#define SDA_CHIPCONTROLENAB 0x007 /* ChipControlEnable */
-#define SDA_F2WATERMARK 0x008 /* Function 2 Watermark */
-#define SDA_DEVICECONTROL 0x009 /* DeviceControl */
-#define SDA_SBADDRLOW 0x00a /* SbAddrLow */
-#define SDA_SBADDRMID 0x00b /* SbAddrMid */
-#define SDA_SBADDRHIGH 0x00c /* SbAddrHigh */
-#define SDA_FRAMECTRL 0x00d /* FrameCtrl */
-#define SDA_CHIPCLOCKCSR 0x00e /* ChipClockCSR */
-#define SDA_SDIOPULLUP 0x00f /* SdioPullUp */
-#define SDA_SDIOWRFRAMEBCLOW 0x019 /* SdioWrFrameBCLow */
-#define SDA_SDIOWRFRAMEBCHIGH 0x01a /* SdioWrFrameBCHigh */
-#define SDA_SDIORDFRAMEBCLOW 0x01b /* SdioRdFrameBCLow */
-#define SDA_SDIORDFRAMEBCHIGH 0x01c /* SdioRdFrameBCHigh */
-
-/* SDA_F2WATERMARK */
-#define SDA_F2WATERMARK_MASK 0x7f /* F2Watermark Mask */
-
-/* SDA_SBADDRLOW */
-#define SDA_SBADDRLOW_MASK 0x80 /* SbAddrLow Mask */
-
-/* SDA_SBADDRMID */
-#define SDA_SBADDRMID_MASK 0xff /* SbAddrMid Mask */
-
-/* SDA_SBADDRHIGH */
-#define SDA_SBADDRHIGH_MASK 0xff /* SbAddrHigh Mask */
-
-/* SDA_FRAMECTRL */
-#define SFC_RF_TERM (1 << 0) /* Read Frame Terminate */
-#define SFC_WF_TERM (1 << 1) /* Write Frame Terminate */
-#define SFC_CRC4WOOS (1 << 2) /* CRC error for write out of sync */
-#define SFC_ABORTALL (1 << 3) /* Abort all in-progress frames */
-
-/* pcmciaframectrl */
-#define PFC_RF_TERM (1 << 0) /* Read Frame Terminate */
-#define PFC_WF_TERM (1 << 1) /* Write Frame Terminate */
-
-/* intrcvlazy */
-#define IRL_TO_MASK 0x00ffffff /* timeout */
-#define IRL_FC_MASK 0xff000000 /* frame count */
-#define IRL_FC_SHIFT 24 /* frame count */
-
-/* rx header flags */
-#define RXF_CRC 0x0001 /* CRC error detected */
-#define RXF_WOOS 0x0002 /* write frame out of sync */
-#define RXF_WF_TERM 0x0004 /* write frame terminated */
-#define RXF_ABORT 0x0008 /* write frame aborted */
-#define RXF_DISCARD (RXF_CRC | RXF_WOOS | RXF_WF_TERM | RXF_ABORT)
-
-/* HW frame tag */
-#define SDPCM_FRAMETAG_LEN 4 /* 2 bytes len, 2 bytes check val */
-
-#endif /* _SBSDIO_H */
/* Maximum number of I/O funcs */
#define SDIOD_MAX_IOFUNCS 7
+#define SBSDIO_NUM_FUNCTION 3 /* as of sdiod rev 0, supports 3 functions */
+
+/* function 1 miscellaneous registers */
+#define SBSDIO_SPROM_CS 0x10000 /* sprom command and status */
+#define SBSDIO_SPROM_INFO 0x10001 /* sprom info register */
+#define SBSDIO_SPROM_DATA_LOW 0x10002 /* sprom indirect access data byte 0 */
+#define SBSDIO_SPROM_DATA_HIGH 0x10003 /* sprom indirect access data byte 1 */
+#define SBSDIO_SPROM_ADDR_LOW 0x10004 /* sprom indirect access addr byte 0 */
+#define SBSDIO_SPROM_ADDR_HIGH 0x10005 /* sprom indirect access addr byte 0 */
+#define SBSDIO_CHIP_CTRL_DATA 0x10006 /* xtal_pu (gpio) output */
+#define SBSDIO_CHIP_CTRL_EN 0x10007 /* xtal_pu (gpio) enable */
+#define SBSDIO_WATERMARK 0x10008 /* rev < 7, watermark for sdio device */
+#define SBSDIO_DEVICE_CTL 0x10009 /* control busy signal generation */
+
+/* registers introduced in rev 8, some content (mask/bits) defs in sbsdpcmdev.h */
+#define SBSDIO_FUNC1_SBADDRLOW 0x1000A /* SB Address Window Low (b15) */
+#define SBSDIO_FUNC1_SBADDRMID 0x1000B /* SB Address Window Mid (b23:b16) */
+#define SBSDIO_FUNC1_SBADDRHIGH 0x1000C /* SB Address Window High (b31:b24) */
+#define SBSDIO_FUNC1_FRAMECTRL 0x1000D /* Frame Control (frame term/abort) */
+#define SBSDIO_FUNC1_CHIPCLKCSR 0x1000E /* ChipClockCSR (ALP/HT ctl/status) */
+#define SBSDIO_FUNC1_SDIOPULLUP 0x1000F /* SdioPullUp (on cmd, d0-d2) */
+#define SBSDIO_FUNC1_WFRAMEBCLO 0x10019 /* Write Frame Byte Count Low */
+#define SBSDIO_FUNC1_WFRAMEBCHI 0x1001A /* Write Frame Byte Count High */
+#define SBSDIO_FUNC1_RFRAMEBCLO 0x1001B /* Read Frame Byte Count Low */
+#define SBSDIO_FUNC1_RFRAMEBCHI 0x1001C /* Read Frame Byte Count High */
+
+#define SBSDIO_FUNC1_MISC_REG_START 0x10000 /* f1 misc register start */
+#define SBSDIO_FUNC1_MISC_REG_LIMIT 0x1001C /* f1 misc register end */
+
+/* SBSDIO_SPROM_CS */
+#define SBSDIO_SPROM_IDLE 0
+#define SBSDIO_SPROM_WRITE 1
+#define SBSDIO_SPROM_READ 2
+#define SBSDIO_SPROM_WEN 4
+#define SBSDIO_SPROM_WDS 7
+#define SBSDIO_SPROM_DONE 8
+
+/* SBSDIO_SPROM_INFO */
+#define SROM_SZ_MASK 0x03 /* SROM size, 1: 4k, 2: 16k */
+#define SROM_BLANK 0x04 /* depreciated in corerev 6 */
+#define SROM_OTP 0x80 /* OTP present */
+
+/* SBSDIO_CHIP_CTRL */
+#define SBSDIO_CHIP_CTRL_XTAL 0x01 /* or'd with onchip xtal_pu,
+ * 1: power on oscillator
+ * (for 4318 only)
+ */
+/* SBSDIO_WATERMARK */
+#define SBSDIO_WATERMARK_MASK 0x7f /* number of words - 1 for sd device
+ * to wait before sending data to host
+ */
+
+/* SBSDIO_DEVICE_CTL */
+#define SBSDIO_DEVCTL_SETBUSY 0x01 /* 1: device will assert busy signal when
+ * receiving CMD53
+ */
+#define SBSDIO_DEVCTL_SPI_INTR_SYNC 0x02 /* 1: assertion of sdio interrupt is
+ * synchronous to the sdio clock
+ */
+#define SBSDIO_DEVCTL_CA_INT_ONLY 0x04 /* 1: mask all interrupts to host
+ * except the chipActive (rev 8)
+ */
+#define SBSDIO_DEVCTL_PADS_ISO 0x08 /* 1: isolate internal sdio signals, put
+ * external pads in tri-state; requires
+ * sdio bus power cycle to clear (rev 9)
+ */
+#define SBSDIO_DEVCTL_SB_RST_CTL 0x30 /* Force SD->SB reset mapping (rev 11) */
+#define SBSDIO_DEVCTL_RST_CORECTL 0x00 /* Determined by CoreControl bit */
+#define SBSDIO_DEVCTL_RST_BPRESET 0x10 /* Force backplane reset */
+#define SBSDIO_DEVCTL_RST_NOBPRESET 0x20 /* Force no backplane reset */
+
+/* SBSDIO_FUNC1_CHIPCLKCSR */
+#define SBSDIO_FORCE_ALP 0x01 /* Force ALP request to backplane */
+#define SBSDIO_FORCE_HT 0x02 /* Force HT request to backplane */
+#define SBSDIO_FORCE_ILP 0x04 /* Force ILP request to backplane */
+#define SBSDIO_ALP_AVAIL_REQ 0x08 /* Make ALP ready (power up xtal) */
+#define SBSDIO_HT_AVAIL_REQ 0x10 /* Make HT ready (power up PLL) */
+#define SBSDIO_FORCE_HW_CLKREQ_OFF 0x20 /* Squelch clock requests from HW */
+#define SBSDIO_ALP_AVAIL 0x40 /* Status: ALP is ready */
+#define SBSDIO_HT_AVAIL 0x80 /* Status: HT is ready */
+/* In rev8, actual avail bits followed original docs */
+#define SBSDIO_Rev8_HT_AVAIL 0x40
+#define SBSDIO_Rev8_ALP_AVAIL 0x80
+
+#define SBSDIO_AVBITS (SBSDIO_HT_AVAIL | SBSDIO_ALP_AVAIL)
+#define SBSDIO_ALPAV(regval) ((regval) & SBSDIO_AVBITS)
+#define SBSDIO_HTAV(regval) (((regval) & SBSDIO_AVBITS) == SBSDIO_AVBITS)
+#define SBSDIO_ALPONLY(regval) (SBSDIO_ALPAV(regval) && !SBSDIO_HTAV(regval))
+#define SBSDIO_CLKAV(regval, alponly) (SBSDIO_ALPAV(regval) && \
+ (alponly ? 1 : SBSDIO_HTAV(regval)))
+
+/* SBSDIO_FUNC1_SDIOPULLUP */
+#define SBSDIO_PULLUP_D0 0x01 /* Enable D0/MISO pullup */
+#define SBSDIO_PULLUP_D1 0x02 /* Enable D1/INT# pullup */
+#define SBSDIO_PULLUP_D2 0x04 /* Enable D2 pullup */
+#define SBSDIO_PULLUP_CMD 0x08 /* Enable CMD/MOSI pullup */
+#define SBSDIO_PULLUP_ALL 0x0f /* All valid bits */
+
+/* function 1 OCP space */
+#define SBSDIO_SB_OFT_ADDR_MASK 0x07FFF /* sb offset addr is <= 15 bits, 32k */
+#define SBSDIO_SB_OFT_ADDR_LIMIT 0x08000
+#define SBSDIO_SB_ACCESS_2_4B_FLAG 0x08000 /* with b15, maps to 32-bit SB access */
+
+/* some duplication with sbsdpcmdev.h here */
+/* valid bits in SBSDIO_FUNC1_SBADDRxxx regs */
+#define SBSDIO_SBADDRLOW_MASK 0x80 /* Valid bits in SBADDRLOW */
+#define SBSDIO_SBADDRMID_MASK 0xff /* Valid bits in SBADDRMID */
+#define SBSDIO_SBADDRHIGH_MASK 0xffU /* Valid bits in SBADDRHIGH */
+#define SBSDIO_SBWINDOW_MASK 0xffff8000 /* Address bits from SBADDR regs */
+
+/* direct(mapped) cis space */
+#define SBSDIO_CIS_BASE_COMMON 0x1000 /* MAPPED common CIS address */
+#define SBSDIO_CIS_SIZE_LIMIT 0x200 /* maximum bytes in one CIS */
+#define SBSDIO_OTP_CIS_SIZE_LIMIT 0x078 /* maximum bytes OTP CIS */
+
+#define SBSDIO_CIS_OFT_ADDR_MASK 0x1FFFF /* cis offset addr is < 17 bits */
+
+#define SBSDIO_CIS_MANFID_TUPLE_LEN 6 /* manfid tuple length, include tuple,
+ * link bytes
+ */
+
+/* indirect cis access (in sprom) */
+#define SBSDIO_SPROM_CIS_OFFSET 0x8 /* 8 control bytes first, CIS starts from
+ * 8th byte
+ */
+
+#define SBSDIO_BYTEMODE_DATALEN_MAX 64 /* sdio byte mode: maximum length of one
+ * data command
+ */
+
+#define SBSDIO_CORE_ADDR_MASK 0x1FFFF /* sdio core function one address mask */
+
+/* corecontrol */
+#define CC_CISRDY (1 << 0) /* CIS Ready */
+#define CC_BPRESEN (1 << 1) /* CCCR RES signal */
+#define CC_F2RDY (1 << 2) /* set CCCR IOR2 bit */
+#define CC_CLRPADSISO (1 << 3) /* clear SDIO pads isolation */
+#define CC_XMTDATAAVAIL_MODE (1 << 4)
+#define CC_XMTDATAAVAIL_CTRL (1 << 5)
+
+/* corestatus */
+#define CS_PCMCIAMODE (1 << 0) /* Device Mode; 0=SDIO, 1=PCMCIA */
+#define CS_SMARTDEV (1 << 1) /* 1=smartDev enabled */
+#define CS_F2ENABLED (1 << 2) /* 1=host has enabled the device */
+
+#define PCMCIA_MES_PA_MASK 0x7fff /* PCMCIA Message Portal Address Mask */
+#define PCMCIA_MES_PM_MASK 0x7fff /* PCMCIA Message Portal Mask Mask */
+#define PCMCIA_WFBC_MASK 0xffff /* PCMCIA Write Frame Byte Count Mask */
+#define PCMCIA_UT_MASK 0x07ff /* PCMCIA Underflow Timer Mask */
+
+/* intstatus */
+#define I_SMB_SW0 (1 << 0) /* To SB Mail S/W interrupt 0 */
+#define I_SMB_SW1 (1 << 1) /* To SB Mail S/W interrupt 1 */
+#define I_SMB_SW2 (1 << 2) /* To SB Mail S/W interrupt 2 */
+#define I_SMB_SW3 (1 << 3) /* To SB Mail S/W interrupt 3 */
+#define I_SMB_SW_MASK 0x0000000f /* To SB Mail S/W interrupts mask */
+#define I_SMB_SW_SHIFT 0 /* To SB Mail S/W interrupts shift */
+#define I_HMB_SW0 (1 << 4) /* To Host Mail S/W interrupt 0 */
+#define I_HMB_SW1 (1 << 5) /* To Host Mail S/W interrupt 1 */
+#define I_HMB_SW2 (1 << 6) /* To Host Mail S/W interrupt 2 */
+#define I_HMB_SW3 (1 << 7) /* To Host Mail S/W interrupt 3 */
+#define I_HMB_SW_MASK 0x000000f0 /* To Host Mail S/W interrupts mask */
+#define I_HMB_SW_SHIFT 4 /* To Host Mail S/W interrupts shift */
+#define I_WR_OOSYNC (1 << 8) /* Write Frame Out Of Sync */
+#define I_RD_OOSYNC (1 << 9) /* Read Frame Out Of Sync */
+#define I_PC (1 << 10) /* descriptor error */
+#define I_PD (1 << 11) /* data error */
+#define I_DE (1 << 12) /* Descriptor protocol Error */
+#define I_RU (1 << 13) /* Receive descriptor Underflow */
+#define I_RO (1 << 14) /* Receive fifo Overflow */
+#define I_XU (1 << 15) /* Transmit fifo Underflow */
+#define I_RI (1 << 16) /* Receive Interrupt */
+#define I_BUSPWR (1 << 17) /* SDIO Bus Power Change (rev 9) */
+#define I_XMTDATA_AVAIL (1 << 23) /* bits in fifo */
+#define I_XI (1 << 24) /* Transmit Interrupt */
+#define I_RF_TERM (1 << 25) /* Read Frame Terminate */
+#define I_WF_TERM (1 << 26) /* Write Frame Terminate */
+#define I_PCMCIA_XU (1 << 27) /* PCMCIA Transmit FIFO Underflow */
+#define I_SBINT (1 << 28) /* sbintstatus Interrupt */
+#define I_CHIPACTIVE (1 << 29) /* chip from doze to active state */
+#define I_SRESET (1 << 30) /* CCCR RES interrupt */
+#define I_IOE2 (1U << 31) /* CCCR IOE2 Bit Changed */
+#define I_ERRORS (I_PC | I_PD | I_DE | I_RU | I_RO | I_XU)
+#define I_DMA (I_RI | I_XI | I_ERRORS)
+
+/* sbintstatus */
+#define I_SB_SERR (1 << 8) /* Backplane SError (write) */
+#define I_SB_RESPERR (1 << 9) /* Backplane Response Error (read) */
+#define I_SB_SPROMERR (1 << 10) /* Error accessing the sprom */
+
+/* sdioaccess */
+#define SDA_DATA_MASK 0x000000ff /* Read/Write Data Mask */
+#define SDA_ADDR_MASK 0x000fff00 /* Read/Write Address Mask */
+#define SDA_ADDR_SHIFT 8 /* Read/Write Address Shift */
+#define SDA_WRITE 0x01000000 /* Write bit */
+#define SDA_READ 0x00000000 /* Write bit cleared for Read */
+#define SDA_BUSY 0x80000000 /* Busy bit */
+
+/* sdioaccess-accessible register address spaces */
+#define SDA_CCCR_SPACE 0x000 /* CCCR register space */
+#define SDA_F1_FBR_SPACE 0x100 /* F1 FBR register space */
+#define SDA_F2_FBR_SPACE 0x200 /* F2 FBR register space */
+#define SDA_F1_REG_SPACE 0x300 /* F1 core-specific register space */
+
+/* SDA_F1_REG_SPACE sdioaccess-accessible F1 reg space register offsets */
+#define SDA_CHIPCONTROLDATA 0x006 /* ChipControlData */
+#define SDA_CHIPCONTROLENAB 0x007 /* ChipControlEnable */
+#define SDA_F2WATERMARK 0x008 /* Function 2 Watermark */
+#define SDA_DEVICECONTROL 0x009 /* DeviceControl */
+#define SDA_SBADDRLOW 0x00a /* SbAddrLow */
+#define SDA_SBADDRMID 0x00b /* SbAddrMid */
+#define SDA_SBADDRHIGH 0x00c /* SbAddrHigh */
+#define SDA_FRAMECTRL 0x00d /* FrameCtrl */
+#define SDA_CHIPCLOCKCSR 0x00e /* ChipClockCSR */
+#define SDA_SDIOPULLUP 0x00f /* SdioPullUp */
+#define SDA_SDIOWRFRAMEBCLOW 0x019 /* SdioWrFrameBCLow */
+#define SDA_SDIOWRFRAMEBCHIGH 0x01a /* SdioWrFrameBCHigh */
+#define SDA_SDIORDFRAMEBCLOW 0x01b /* SdioRdFrameBCLow */
+#define SDA_SDIORDFRAMEBCHIGH 0x01c /* SdioRdFrameBCHigh */
+
+/* SDA_F2WATERMARK */
+#define SDA_F2WATERMARK_MASK 0x7f /* F2Watermark Mask */
+
+/* SDA_SBADDRLOW */
+#define SDA_SBADDRLOW_MASK 0x80 /* SbAddrLow Mask */
+
+/* SDA_SBADDRMID */
+#define SDA_SBADDRMID_MASK 0xff /* SbAddrMid Mask */
+
+/* SDA_SBADDRHIGH */
+#define SDA_SBADDRHIGH_MASK 0xff /* SbAddrHigh Mask */
+
+/* SDA_FRAMECTRL */
+#define SFC_RF_TERM (1 << 0) /* Read Frame Terminate */
+#define SFC_WF_TERM (1 << 1) /* Write Frame Terminate */
+#define SFC_CRC4WOOS (1 << 2) /* CRC error for write out of sync */
+#define SFC_ABORTALL (1 << 3) /* Abort all in-progress frames */
+
+/* pcmciaframectrl */
+#define PFC_RF_TERM (1 << 0) /* Read Frame Terminate */
+#define PFC_WF_TERM (1 << 1) /* Write Frame Terminate */
+
+/* intrcvlazy */
+#define IRL_TO_MASK 0x00ffffff /* timeout */
+#define IRL_FC_MASK 0xff000000 /* frame count */
+#define IRL_FC_SHIFT 24 /* frame count */
+
+/* rx header flags */
+#define RXF_CRC 0x0001 /* CRC error detected */
+#define RXF_WOOS 0x0002 /* write frame out of sync */
+#define RXF_WF_TERM 0x0004 /* write frame terminated */
+#define RXF_ABORT 0x0008 /* write frame aborted */
+#define RXF_DISCARD (RXF_CRC | RXF_WOOS | RXF_WF_TERM | RXF_ABORT)
+
+/* HW frame tag */
+#define SDPCM_FRAMETAG_LEN 4 /* 2 bytes len, 2 bytes check val */
+
/* forward declarations */
struct brcmf_sdio_card;
+
/* Attach and build an interface to the underlying SD host driver.
* - Allocates resources (structs, arrays, mem, OS handles, etc) needed by
* brcmf_sdcard.
projects / platform / upstream / kernel-adaptation-pc.git / commitdiff