ARM: dts: sun8i: a23/a33: Add R_I2C Controller

The A23 and A33 both have an I2C controller in the ARISC domain, that share
the same pins with the RSB bus.

Even if it's an unusual configuration, that device can be used to drive the
PMIC, so let's use it.

Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

diff --git a/arch/arm/boot/dts/sun8i-a23-a33.dtsi b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
index 396d32c..5d2c438 100644 (file)
--- a/arch/arm/boot/dts/sun8i-a23-a33.dtsi
+++ b/arch/arm/boot/dts/sun8i-a23-a33.dtsi
@@ -781,6 +781,20 @@
                        status = "disabled";
                };
 
+               r_i2c: i2c@1f02400 {
+                       compatible = "allwinner,sun8i-a23-i2c",
+                                    "allwinner,sun6i-a31-i2c";
+                       reg = <0x01f02400 0x400>;
+                       interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&r_i2c_pins>;
+                       clocks = <&apb0_gates 6>;
+                       resets = <&apb0_rst 6>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
                r_pio: pinctrl@1f02c00 {
                        compatible = "allwinner,sun8i-a23-r-pinctrl";
                        reg = <0x01f02c00 0x400>;
@@ -793,6 +807,12 @@
                        #interrupt-cells = <3>;
                        #gpio-cells = <3>;
 
+                       r_i2c_pins: r-i2c-pins {
+                               pins = "PL0", "PL1";
+                               function = "s_i2c";
+                               bias-pull-up;
+                       };
+
                        r_rsb_pins: r-rsb-pins {
                                pins = "PL0", "PL1";
                                function = "s_rsb";