ARM: at91: add pmc DT support

Specified the main Oscillator via clock binding.
This will allow to do not hardcode it anymore in the DT board at 12MHz.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

diff --git a/Documentation/devicetree/bindings/arm/atmel-pmc.txt b/Documentation/devicetree/bindings/arm/atmel-pmc.txt
new file mode 100644 (file)
index 0000000..389bed5
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/atmel-pmc.txt
@@ -0,0 +1,11 @@
+* Power Management Controller (PMC)
+
+Required properties:
+- compatible: Should be "atmel,at91rm9200-pmc"
+- reg: Should contain PMC registers location and length
+
+Examples:
+       pmc: pmc@fffffc00 {
+               compatible = "atmel,at91rm9200-pmc";
+               reg = <0xfffffc00 0x100>;
+       };

diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
index a885a30..dd5d114 100644 (file)
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -59,6 +59,11 @@
                                reg = <0xfffff000 0x200>;
                        };
 
+                       pmc: pmc@fffffc00 {
+                               compatible = "atmel,at91rm9200-pmc";
+                               reg = <0xfffffc00 0x100>;
+                       };
+
                        pit: timer@fffffd30 {
                                compatible = "atmel,at91sam9260-pit";
                                reg = <0xfffffd30 0xf>;

diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index 92fe5a5..621a329 100644 (file)
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -60,6 +60,11 @@
                                reg = <0xfffff000 0x200>;
                        };
 
+                       pmc: pmc@fffffc00 {
+                               compatible = "atmel,at91rm9200-pmc";
+                               reg = <0xfffffc00 0x100>;
+                       };
+
                        pit: timer@fffffd30 {
                                compatible = "atmel,at91sam9260-pit";
                                reg = <0xfffffd30 0xf>;

diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index fd45311..a895824 100644 (file)
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -21,6 +21,17 @@
                reg = <0x70000000 0x4000000>;
        };
 
+       clocks {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+
+               main_clock: clock@0 {
+                       compatible = "atmel,osc", "fixed-clock";
+                       clock-frequency = <12000000>;
+               };
+       };
+
        ahb {
                apb {
                        dbgu: serial@ffffee00 {

diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index f0104f4..3855843 100644 (file)
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -58,6 +58,11 @@
                                reg = <0xfffff000 0x200>;
                        };
 
+                       pmc: pmc@fffffc00 {
+                               compatible = "atmel,at91rm9200-pmc";
+                               reg = <0xfffffc00 0x100>;
+                       };
+
                        pit: timer@fffffe30 {
                                compatible = "atmel,at91sam9260-pit";
                                reg = <0xfffffe30 0xf>;

diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi
index 5b37033..67936f8 100644 (file)
--- a/arch/arm/boot/dts/at91sam9x5cm.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi
@@ -12,6 +12,17 @@
                reg = <0x20000000 0x8000000>;
        };
 
+       clocks {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+
+               main_clock: clock@0 {
+                       compatible = "atmel,osc", "fixed-clock";
+                       clock-frequency = <12000000>;
+               };
+       };
+
        ahb {
                nand0: nand@40000000 {
                        nand-bus-width = <8>;

diff --git a/arch/arm/boot/dts/usb_a9g20.dts b/arch/arm/boot/dts/usb_a9g20.dts
index 0ea90b5..73f1dc4 100644 (file)
--- a/arch/arm/boot/dts/usb_a9g20.dts
+++ b/arch/arm/boot/dts/usb_a9g20.dts
@@ -20,6 +20,17 @@
                reg = <0x20000000 0x4000000>;
        };
 
+       clocks {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+
+               main_clock: clock@0 {
+                       compatible = "atmel,osc", "fixed-clock";
+                       clock-frequency = <12000000>;
+               };
+       };
+
        ahb {
                apb {
                        dbgu: serial@fffff200 {

diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index be51ca7..a0f4d74 100644 (file)
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -23,6 +23,7 @@
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/of_address.h>
 
 #include <mach/hardware.h>
 #include <mach/at91_pmc.h>
@@ -671,16 +672,12 @@ static void __init at91_upll_usbfs_clock_init(unsigned long main_clock)
        uhpck.rate_hz /= 1 + ((at91_pmc_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
 }
 
-int __init at91_clock_init(unsigned long main_clock)
+static int __init at91_pmc_init(unsigned long main_clock)
 {
        unsigned tmp, freq, mckr;
        int i;
        int pll_overclock = false;
 
-       at91_pmc_base = ioremap(AT91_PMC, 256);
-       if (!at91_pmc_base)
-               panic("Impossible to ioremap AT91_PMC 0x%x\n", AT91_PMC);
-
        /*
         * When the bootloader initialized the main oscillator correctly,
         * there's no problem using the cycle counter.  But if it didn't,
@@ -802,6 +799,55 @@ int __init at91_clock_init(unsigned long main_clock)
        return 0;
 }
 
+#if defined(CONFIG_OF)
+static struct of_device_id pmc_ids[] = {
+       { .compatible = "atmel,at91rm9200-pmc" },
+       { /*sentinel*/ }
+};
+
+static struct of_device_id osc_ids[] = {
+       { .compatible = "atmel,osc" },
+       { /*sentinel*/ }
+};
+
+int __init at91_dt_clock_init(void)
+{
+       struct device_node *np;
+       u32 main_clock = 0;
+
+       np = of_find_matching_node(NULL, pmc_ids);
+       if (!np)
+               panic("unable to find compatible pmc node in dtb\n");
+
+       at91_pmc_base = of_iomap(np, 0);
+       if (!at91_pmc_base)
+               panic("unable to map pmc cpu registers\n");
+
+       of_node_put(np);
+
+       /* retrieve the freqency of fixed clocks from device tree */
+       np = of_find_matching_node(NULL, osc_ids);
+       if (np) {
+               u32 rate;
+               if (!of_property_read_u32(np, "clock-frequency", &rate))
+                       main_clock = rate;
+       }
+
+       of_node_put(np);
+
+       return at91_pmc_init(main_clock);
+}
+#endif
+
+int __init at91_clock_init(unsigned long main_clock)
+{
+       at91_pmc_base = ioremap(AT91_PMC, 256);
+       if (!at91_pmc_base)
+               panic("Impossible to ioremap AT91_PMC 0x%x\n", AT91_PMC);
+
+       return at91_pmc_init(main_clock);
+}
+
 /*
  * Several unused clocks may be active.  Turn them off.
  */

diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index d5f5083..dd9b346 100644 (file)
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -53,6 +53,7 @@ extern void __init at91sam9rl_set_console_clock(int id);
 extern void __init at91sam9g45_set_console_clock(int id);
 #ifdef CONFIG_AT91_PMC_UNIT
 extern int __init at91_clock_init(unsigned long main_clock);
+extern int __init at91_dt_clock_init(void);
 #else
 static int inline at91_clock_init(unsigned long main_clock) { return 0; }
 #endif

diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index c0bd5a6..d7abc25 100644 (file)
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -292,9 +292,8 @@ void __init at91_dt_initialize(void)
        /* temporary until have the ramc binding*/
        at91_boot_soc.ioremap_registers();
 
-       /* temporary until have the pmc binding */
        /* Init clock subsystem */
-       at91_clock_init(12000000);
+       at91_dt_clock_init();
 
        /* Register the processor-specific clocks */
        at91_boot_soc.register_clocks();