thermal: small style cleanup in mtk_thermal

Remove all checkpatch.pl --strict errors, checks, and warnings.

Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-pm@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>

diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
index 589a138..3d93b1c 100644 (file)
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mtk_thermal.c
@@ -78,7 +78,7 @@
 
 #define TEMP_MONCTL1_PERIOD_UNIT(x)    ((x) & 0x3ff)
 
-#define TEMP_MONCTL2_FILTER_INTERVAL(x)        (((x) & 0x3ff)) << 16
+#define TEMP_MONCTL2_FILTER_INTERVAL(x)        (((x) & 0x3ff) << 16)
 #define TEMP_MONCTL2_SENSOR_INTERVAL(x)        ((x) & 0x3ff)
 
 #define TEMP_AHBPOLL_ADC_POLL_INTERVAL(x)      (x)
@@ -108,15 +108,15 @@
 #define MT8173_NUM_SENSORS_PER_ZONE    4
 
 /* Layout of the fuses providing the calibration data */
-#define MT8173_CALIB_BUF0_VALID                (1 << 0)
-#define MT8173_CALIB_BUF1_ADC_GE(x)    (((x) >> 22 ) & 0x3ff)
-#define MT8173_CALIB_BUF0_VTS_TS1(x)   (((x) >> 17 ) & 0x1ff)
-#define MT8173_CALIB_BUF0_VTS_TS2(x)   (((x) >> 8 ) & 0x1ff)
-#define MT8173_CALIB_BUF1_VTS_TS3(x)   (((x) >> 0 ) & 0x1ff)
-#define MT8173_CALIB_BUF2_VTS_TS4(x)   (((x) >> 23 ) & 0x1ff)
-#define MT8173_CALIB_BUF2_VTS_TSABB(x) (((x) >> 14 ) & 0x1ff)
-#define MT8173_CALIB_BUF0_DEGC_CALI(x) (((x) >> 1 ) & 0x3f)
-#define MT8173_CALIB_BUF0_O_SLOPE(x)   (((x) >> 26 ) & 0x3f)
+#define MT8173_CALIB_BUF0_VALID                BIT(0)
+#define MT8173_CALIB_BUF1_ADC_GE(x)    (((x) >> 22) & 0x3ff)
+#define MT8173_CALIB_BUF0_VTS_TS1(x)   (((x) >> 17) & 0x1ff)
+#define MT8173_CALIB_BUF0_VTS_TS2(x)   (((x) >> 8) & 0x1ff)
+#define MT8173_CALIB_BUF1_VTS_TS3(x)   (((x) >> 0) & 0x1ff)
+#define MT8173_CALIB_BUF2_VTS_TS4(x)   (((x) >> 23) & 0x1ff)
+#define MT8173_CALIB_BUF2_VTS_TSABB(x) (((x) >> 14) & 0x1ff)
+#define MT8173_CALIB_BUF0_DEGC_CALI(x) (((x) >> 1) & 0x3f)
+#define MT8173_CALIB_BUF0_O_SLOPE(x)   (((x) >> 26) & 0x3f)
 
 #define THERMAL_NAME    "mtk-thermal"
 
@@ -136,6 +136,7 @@ struct mtk_thermal {
 
        struct mtk_thermal_bank banks[MT8173_NUM_ZONES];
 
+       /* lock: for getting and putting banks */
        struct mutex lock;
 
        /* Calibration values */
@@ -271,11 +272,9 @@ static void mtk_thermal_put_bank(struct mtk_thermal_bank *bank)
 static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
 {
        struct mtk_thermal *mt = bank->mt;
-       int temp, i, max;
+       int i, temp = INT_MIN, max = INT_MIN;
        u32 raw;
 
-       temp = max = INT_MIN;
-
        for (i = 0; i < bank_data[bank->id].num_sensors; i++) {
                raw = readl(mt->thermal_base + sensing_points[i].msr);
 
@@ -322,7 +321,7 @@ static const struct thermal_zone_of_device_ops mtk_thermal_ops = {
 };
 
 static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
-               u32 apmixed_phys_base, u32 auxadc_phys_base)
+                                 u32 apmixed_phys_base, u32 auxadc_phys_base)
 {
        struct mtk_thermal_bank *bank = &mt->banks[num];
        const struct mtk_thermal_bank_cfg *cfg = &bank_data[num];
@@ -346,7 +345,7 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
 
        /* poll is set to 10u */
        writel(TEMP_AHBPOLL_ADC_POLL_INTERVAL(768),
-                       mt->thermal_base + TEMP_AHBPOLL);
+              mt->thermal_base + TEMP_AHBPOLL);
 
        /* temperature sampling control, 1 sample */
        writel(0x0, mt->thermal_base + TEMP_MSRCTL0);
@@ -375,49 +374,50 @@ static void mtk_thermal_init_bank(struct mtk_thermal *mt, int num,
 
        /* AHB address for auxadc mux selection */
        writel(auxadc_phys_base + AUXADC_CON1_CLR_V,
-                       mt->thermal_base + TEMP_ADCMUXADDR);
+              mt->thermal_base + TEMP_ADCMUXADDR);
 
        /* AHB address for pnp sensor mux selection */
        writel(apmixed_phys_base + APMIXED_SYS_TS_CON1,
-                       mt->thermal_base + TEMP_PNPMUXADDR);
+              mt->thermal_base + TEMP_PNPMUXADDR);
 
        /* AHB value for auxadc enable */
        writel(BIT(MT8173_TEMP_AUXADC_CHANNEL), mt->thermal_base + TEMP_ADCEN);
 
        /* AHB address for auxadc enable (channel 0 immediate mode selected) */
        writel(auxadc_phys_base + AUXADC_CON1_SET_V,
-                       mt->thermal_base + TEMP_ADCENADDR);
+              mt->thermal_base + TEMP_ADCENADDR);
 
        /* AHB address for auxadc valid bit */
        writel(auxadc_phys_base + AUXADC_DATA(MT8173_TEMP_AUXADC_CHANNEL),
-                       mt->thermal_base + TEMP_ADCVALIDADDR);
+              mt->thermal_base + TEMP_ADCVALIDADDR);
 
        /* AHB address for auxadc voltage output */
        writel(auxadc_phys_base + AUXADC_DATA(MT8173_TEMP_AUXADC_CHANNEL),
-                       mt->thermal_base + TEMP_ADCVOLTADDR);
+              mt->thermal_base + TEMP_ADCVOLTADDR);
 
        /* read valid & voltage are at the same register */
        writel(0x0, mt->thermal_base + TEMP_RDCTRL);
 
        /* indicate where the valid bit is */
        writel(TEMP_ADCVALIDMASK_VALID_HIGH | TEMP_ADCVALIDMASK_VALID_POS(12),
-                       mt->thermal_base + TEMP_ADCVALIDMASK);
+              mt->thermal_base + TEMP_ADCVALIDMASK);
 
        /* no shift */
        writel(0x0, mt->thermal_base + TEMP_ADCVOLTAGESHIFT);
 
        /* enable auxadc mux write transaction */
        writel(TEMP_ADCWRITECTRL_ADC_MUX_WRITE,
-                       mt->thermal_base + TEMP_ADCWRITECTRL);
+              mt->thermal_base + TEMP_ADCWRITECTRL);
 
        for (i = 0; i < cfg->num_sensors; i++)
                writel(sensor_mux_values[cfg->sensors[i]],
-                               mt->thermal_base + sensing_points[i].adcpnp);
+                      mt->thermal_base + sensing_points[i].adcpnp);
 
        writel((1 << cfg->num_sensors) - 1, mt->thermal_base + TEMP_MONCTL0);
 
-       writel(TEMP_ADCWRITECTRL_ADC_PNP_WRITE | TEMP_ADCWRITECTRL_ADC_MUX_WRITE,
-                       mt->thermal_base + TEMP_ADCWRITECTRL);
+       writel(TEMP_ADCWRITECTRL_ADC_PNP_WRITE |
+              TEMP_ADCWRITECTRL_ADC_MUX_WRITE,
+              mt->thermal_base + TEMP_ADCWRITECTRL);
 
        mtk_thermal_put_bank(bank);
 }
@@ -434,7 +434,8 @@ static u64 of_get_phys_base(struct device_node *np)
        return of_translate_address(np, regaddr_p);
 }
 
-static int mtk_thermal_get_calibration_data(struct device *dev, struct mtk_thermal *mt)
+static int mtk_thermal_get_calibration_data(struct device *dev,
+                                           struct mtk_thermal *mt)
 {
        struct nvmem_cell *cell;
        u32 *buf;
@@ -567,7 +568,8 @@ static int mtk_thermal_probe(struct platform_device *pdev)
        }
 
        for (i = 0; i < MT8173_NUM_ZONES; i++)
-               mtk_thermal_init_bank(mt, i, apmixed_phys_base, auxadc_phys_base);
+               mtk_thermal_init_bank(mt, i, apmixed_phys_base,
+                                     auxadc_phys_base);
 
        platform_set_drvdata(pdev, mt);