* lib/binutils-common.exp (regexp_diff): New procedure.
* lib/utils-lib.exp (regexp_diff): Delete.
gas/testsuite/
* lib/gas-defs.exp (regexp_diff): Delete.
(run_dump_test): Remove final "" argument in call to regexp_diff.
(run_list_test): Likewise.
(run_list_test_stdin): Likewise.
* gas/all/gas.exp (test_cond): Likewise.
* gas/elf/elf.exp (run_elf_list_test): Likewise.
* gas/m68k/all.exp: Likewise.
* gas/mep/complex-relocs.exp (regexp_test): Likewise.
* gas/mt/relocs.exp (regexp_test): Likewise.
* gas/symver/symver.exp (run_error_test): Likewise.
ld/testsuite/
* lib/ld-lib.exp (regexp_diff, simple_diff): Delete.
2010-11-20 Richard Sandiford <rdsandiford@googlemail.com>
+ * lib/binutils-common.exp (regexp_diff): New procedure.
+ * lib/utils-lib.exp (regexp_diff): Delete.
+
+2010-11-20 Richard Sandiford <rdsandiford@googlemail.com>
+
* lib/binutils-common.exp: New file.
* lib/utils-lib.exp (load_common_lib): New function. Load
binutils-common.exp.
return 0
}
+
+# Compare two files line-by-line. FILE_1 is the actual output and FILE_2
+# is the expected output. Ignore blank lines in either file.
+#
+# FILE_2 is a series of regexps, comments and # directives. The directives
+# are:
+#
+# #pass
+# Treat the test as a PASS if everything up till this point has
+# matched. Ignore any remaining lines in either FILE_1 or FILE_2.
+#
+# #failif
+# Reverse the sense of the test: expect differences to exist.
+#
+# #...
+# REGEXP
+# Skip all lines in FILE_1 until the first that matches REGEXP.
+#
+# Other # lines are comments. Skip empty lines in both files.
+#
+# The first optional argument is a list of regexp substitutions of the form:
+#
+# EXP1 SUBSPEC1 EXP2 SUBSPEC2 ...
+#
+# This tells the function to apply each regexp substitution EXPi->SUBSPECi
+# in order to every line of FILE_2.
+#
+# Return nonzero if differences exist.
+proc regexp_diff { file_1 file_2 args } {
+ set eof -1
+ set end_1 0
+ set end_2 0
+ set differences 0
+ set diff_pass 0
+ set fail_if_match 0
+ set ref_subst ""
+ if { [llength $args] > 0 } {
+ set ref_subst [lindex $args 0]
+ }
+ if { [llength $args] > 1 } {
+ perror "Too many arguments to regexp_diff"
+ return 1
+ }
+
+ if [file exists $file_1] then {
+ set file_a [open $file_1 r]
+ } else {
+ perror "$file_1 doesn't exist"
+ return 1
+ }
+
+ if [file exists $file_2] then {
+ set file_b [open $file_2 r]
+ } else {
+ perror "$file_2 doesn't exist"
+ close $file_a
+ return 1
+ }
+
+ verbose " Regexp-diff'ing: $file_1 $file_2" 2
+
+ while { 1 } {
+ set line_a ""
+ set line_b ""
+ while { [string length $line_a] == 0 } {
+ # Ignore blank line in FILE_1.
+ if { [gets $file_a line_a] == $eof } {
+ set end_1 1
+ break
+ }
+ }
+ while { [string length $line_b] == 0 || [string match "#*" $line_b] } {
+ if { [string match "#pass" $line_b] } {
+ set end_2 1
+ set diff_pass 1
+ break
+ } elseif { [string match "#failif" $line_b] } {
+ send_log "fail if no difference\n"
+ verbose "fail if no difference" 3
+ set fail_if_match 1
+ } elseif { [string match "#..." $line_b] } {
+ if { [gets $file_b line_b] == $eof } {
+ set end_2 1
+ set diff_pass 1
+ break
+ }
+ # Substitute on the reference.
+ foreach {name value} $ref_subst {
+ regsub -- $name $line_b $value line_b
+ }
+ verbose "looking for \"^$line_b$\"" 3
+ while { ![regexp "^$line_b$" "$line_a"] } {
+ verbose "skipping \"$line_a\"" 3
+ if { [gets $file_a line_a] == $eof } {
+ set end_1 1
+ break
+ }
+ }
+ break
+ }
+ if { [gets $file_b line_b] == $eof } {
+ set end_2 1
+ break
+ }
+ }
+
+ if { $diff_pass } {
+ break
+ } elseif { $end_1 && $end_2 } {
+ break
+ } elseif { $end_1 } {
+ send_log "extra regexps in $file_2 starting with \"^$line_b$\"\nEOF from $file_1\n"
+ verbose "extra regexps in $file_2 starting with \"^$line_b$\"\nEOF from $file_1" 3
+ set differences 1
+ break
+ } elseif { $end_2 } {
+ send_log "extra lines in $file_1 starting with \"^$line_a$\"\nEOF from $file_2\n"
+ verbose "extra lines in $file_1 starting with \"^$line_a$\"\nEOF from $file_2\n" 3
+ set differences 1
+ break
+ } else {
+ # Substitute on the reference.
+ foreach {name value} $ref_subst {
+ regsub -- $name $line_b $value line_b
+ }
+ verbose "regexp \"^$line_b$\"\nline \"$line_a\"" 3
+ if { ![regexp "^$line_b$" "$line_a"] } {
+ send_log "regexp_diff match failure\n"
+ send_log "regexp \"^$line_b$\"\nline \"$line_a\"\n"
+ verbose "regexp_diff match failure\n" 3
+ set differences 1
+ }
+ }
+ }
+
+ if { $differences == 0 && !$diff_pass && [eof $file_a] != [eof $file_b] } {
+ send_log "$file_1 and $file_2 are different lengths\n"
+ verbose "$file_1 and $file_2 are different lengths" 3
+ set differences 1
+ }
+
+ if { $fail_if_match } {
+ if { $differences == 0 } {
+ set differences 1
+ } else {
+ set differences 0
+ }
+ }
+
+ close $file_a
+ close $file_b
+
+ return $differences
+}
#
# After the option lines come regexp lines. `run_dump_test' calls
# `regexp_diff' to compare the output of the dumping tool against the
-# regexps in FILE.d. `regexp_diff' is defined later in this file; see
-# further comments there.
+# regexps in FILE.d. `regexp_diff' is defined in binutils-common.exp;
+# see further comments there.
proc run_dump_test { name {extra_options {}} } {
global subdir srcdir
return $opt_array
}
-# regexp_diff, based on simple_diff taken from ld test suite
-# compares two files line-by-line
-# file1 contains strings, file2 contains regexps and #-comments
-# blank lines are ignored in either file
-# returns non-zero if differences exist
-#
-proc regexp_diff { file_1 file_2 } {
-
- set eof -1
- set end_1 0
- set end_2 0
- set differences 0
- set diff_pass 0
-
- if [file exists $file_1] then {
- set file_a [open $file_1 r]
- } else {
- perror "$file_1 doesn't exist"
- return 1
- }
-
- if [file exists $file_2] then {
- set file_b [open $file_2 r]
- } else {
- perror "$file_2 doesn't exist"
- close $file_a
- return 1
- }
-
- verbose " Regexp-diff'ing: $file_1 $file_2" 2
-
- while { 1 } {
- set line_a ""
- set line_b ""
- while { [string length $line_a] == 0 } {
- if { [gets $file_a line_a] == $eof } {
- set end_1 1
- break
- }
- }
- while { [string length $line_b] == 0 || [string match "#*" $line_b] } {
- if [ string match "#pass" $line_b ] {
- set end_2 1
- set diff_pass 1
- break
- } elseif [ string match "#..." $line_b ] {
- if { [gets $file_b line_b] == $eof } {
- set end_2 1
- set diff_pass 1
- break
- }
- verbose "looking for \"^$line_b$\"" 3
- while { ![regexp "^$line_b$" "$line_a"] } {
- verbose "skipping \"$line_a\"" 3
- if { [gets $file_a line_a] == $eof } {
- set end_1 1
- break
- }
- }
- break
- }
- if { [gets $file_b line_b] == $eof } {
- set end_2 1
- break
- }
- }
-
- if { $diff_pass } {
- break
- } elseif { $end_1 && $end_2 } {
- break
- } elseif { $end_1 } {
- send_log "extra regexps in $file_2 starting with \"^$line_b$\"\nEOF from $file_1\n"
- verbose "extra regexps in $file_2 starting with \"^$line_b$\"\nEOF from $file_1" 3
- set differences 1
- break
- } elseif { $end_2 } {
- send_log "extra lines in $file_1 starting with \"^$line_a$\"\nEOF from $file_2\n"
- verbose "extra lines in $file_1 starting with \"^$line_a$\"\nEOF from $file_2\n" 3
- set differences 1
- break
- } else {
- verbose "regexp \"^$line_b$\"\nline \"$line_a\"" 3
- if ![regexp "^$line_b$" "$line_a"] {
- send_log "regexp_diff match failure\n"
- send_log "regexp \"^$line_b$\"\nline \"$line_a\"\n"
- verbose "regexp_diff match failure\n" 3
- set differences 1
- }
- }
- }
-
- if { $differences == 0 && !$diff_pass && [eof $file_a] != [eof $file_b] } {
- send_log "$file_1 and $file_2 are different lengths\n"
- verbose "$file_1 and $file_2 are different lengths" 3
- set differences 1
- }
-
- close $file_a
- close $file_b
-
- return $differences
-}
-
proc file_contents { filename } {
set file [open $filename r]
set contents [read $file]
2010-11-20 Richard Sandiford <rdsandiford@googlemail.com>
+ * lib/gas-defs.exp (regexp_diff): Delete.
+ (run_dump_test): Remove final "" argument in call to regexp_diff.
+ (run_list_test): Likewise.
+ (run_list_test_stdin): Likewise.
+ * gas/all/gas.exp (test_cond): Likewise.
+ * gas/elf/elf.exp (run_elf_list_test): Likewise.
+ * gas/m68k/all.exp: Likewise.
+ * gas/mep/complex-relocs.exp (regexp_test): Likewise.
+ * gas/mt/relocs.exp (regexp_test): Likewise.
+ * gas/symver/symver.exp (run_error_test): Likewise.
+
+2010-11-20 Richard Sandiford <rdsandiford@googlemail.com>
+
* lib/gas-defs.exp (load_common_lib): New function. Load
binutils-common.exp.
(is_elf_format, is_aout_format, is_pecoff_format): Delete.
send_log "$comp_output\n"
fail $testname
} else {
- if { [regexp_diff dump.out $srcdir/$subdir/cond.l ""] } {
+ if { [regexp_diff dump.out $srcdir/$subdir/cond.l] } {
fail $testname
} else {
pass $testname
set file $srcdir/$subdir/$name
gas_run ${name}.s "$opts -o dump.o" ">&dump.out"
if { ![string match "" $opts]
- && [regexp_diff "dump.out" "${file}.l" ""] } then {
+ && [regexp_diff "dump.out" "${file}.l"] } then {
fail $testname
verbose "output is [file_contents "dump.out"]" 2
return
return
}
verbose_eval {[file_contents "dump.out"]} 3
- if { [regexp_diff "dump.out" "${file}.e${suffix}" ""] } then {
+ if { [regexp_diff "dump.out" "${file}.e${suffix}"] } then {
fail $testname
verbose "output is [file_contents "dump.out"]" 2
return
verbose "$comp_output" 3
fail $testname
} else {
- if [regexp_diff "err.out" "$srcdir/$subdir/op68000.d" ""] then {
+ if [regexp_diff "err.out" "$srcdir/$subdir/op68000.d"] then {
fail $testname
} else {
pass $testname
}
proc regexp_test { file1 file2 test } {
- if [regexp_diff $file1 $file2 ""] then { fail $test } else { pass $test }
+ if [regexp_diff $file1 $file2] then { fail $test } else { pass $test }
}
}
proc regexp_test { file1 file2 test } {
- if [regexp_diff $file1 $file2 ""] then { fail $test } else { pass $test }
+ if [regexp_diff $file1 $file2] then { fail $test } else { pass $test }
}
set testname "symver $name"
set file $srcdir/$subdir/$name
gas_run ${name}.s $opts ">&dump.out"
- if { [regexp_diff "dump.out" "${file}.l" ""] } then {
+ if { [regexp_diff "dump.out" "${file}.l"] } then {
fail $testname
verbose "output is [file_contents "dump.out"]" 2
return
#
# After the option lines come regexp lines. `run_dump_test' calls
# `regexp_diff' to compare the output of the dumping tool against the
-# regexps in FILE.d. `regexp_diff' is defined later in this file; see
-# further comments there.
+# regexps in FILE.d. `regexp_diff' is defined in binutils-common.exp;
+# see further comments there.
proc run_dump_test { name {extra_options {}} } {
global subdir srcdir
}
set stderrfile $srcdir/$subdir/$opts(stderr)
verbose "wrote pruned stderr to dump.stderr" 3
- if { [regexp_diff "dump.stderr" "$stderrfile" ""] } then {
+ if { [regexp_diff "dump.stderr" "$stderrfile"] } then {
if { $opts(error) != "" } {
verbose -log "$exitstat with: <$comp_output>, expected: <$opts(error)>"
if [regexp $opts(error) $comp_output] {
eof { perror "eof" }
}
-# regexp_diff, based on simple_diff taken from ld test suite.
-# Compares two files line-by-line.
-# FILE_1 contains strings, FILE_2 contains regexps and #-comments
-# Blank lines are ignored in either file.
-# Subsitutions in REF_SUBST are applied on FILE_2 lines.
-# Returns non-zero if differences exist.
-#
-proc regexp_diff { file_1 file_2 ref_subst} {
-
- set eof -1
- set end_1 0
- set end_2 0
- set differences 0
- set diff_pass 0
-
- if [file exists $file_1] then {
- set file_a [open $file_1 r]
- } else {
- perror "$file_1 doesn't exist"
- return 1
- }
-
- if [file exists $file_2] then {
- set file_b [open $file_2 r]
- } else {
- perror "$file_2 doesn't exist"
- close $file_a
- return 1
- }
-
- verbose " Regexp-diff'ing: $file_1 $file_2" 2
-
- while { 1 } {
- set line_a ""
- set line_b ""
- while { [string length $line_a] == 0 } {
- # Ignore blank line in FILE_1.
- if { [gets $file_a line_a] == $eof } {
- set end_1 1
- break
- }
- }
- while { [string length $line_b] == 0 || [string match "#*" $line_b] } {
- if [ string match "#pass" $line_b ] {
- set end_2 1
- set diff_pass 1
- break
- } elseif [ string match "#..." $line_b ] {
- if { [gets $file_b line_b] == $eof } {
- set end_2 1
- set diff_pass 1
- break
- }
- # Substitute on the reference.
- foreach {name value} $ref_subst {
- regsub -- $name $line_b $value line_b
- }
- verbose "looking for \"^$line_b$\"" 3
- while { ![regexp "^$line_b$" "$line_a"] } {
- verbose "skipping \"$line_a\"" 3
- if { [gets $file_a line_a] == $eof } {
- set end_1 1
- break
- }
- }
- break
- }
- if { [gets $file_b line_b] == $eof } {
- set end_2 1
- break
- }
- }
-
- if { $diff_pass } {
- break
- } elseif { $end_1 && $end_2 } {
- break
- } elseif { $end_1 } {
- send_log "extra regexps in $file_2 starting with \"^$line_b$\"\nEOF from $file_1\n"
- verbose "extra regexps in $file_2 starting with \"^$line_b$\"\nEOF from $file_1" 3
- set differences 1
- break
- } elseif { $end_2 } {
- send_log "extra lines in $file_1 starting with \"^$line_a$\"\nEOF from $file_2\n"
- verbose "extra lines in $file_1 starting with \"^$line_a$\"\nEOF from $file_2\n" 3
- set differences 1
- break
- } else {
- # Substitute on the reference.
- foreach {name value} $ref_subst {
- regsub -- $name $line_b $value line_b
- }
- verbose "regexp \"^$line_b$\"\nline \"$line_a\"" 3
- if ![regexp "^$line_b$" "$line_a"] {
- send_log "regexp_diff match failure\n"
- send_log "regexp \"^$line_b$\"\nline \"$line_a\"\n"
- verbose "regexp_diff match failure\n" 3
- set differences 1
- }
- }
- }
-
- if { $differences == 0 && !$diff_pass && [eof $file_a] != [eof $file_b] } {
- send_log "$file_1 and $file_2 are different lengths\n"
- verbose "$file_1 and $file_2 are different lengths" 3
- set differences 1
- }
-
- close $file_a
- close $file_b
-
- return $differences
-}
-
proc file_contents { filename } {
set file [open $filename r]
set contents [read $file]
}
set file $srcdir/$subdir/$name
gas_run ${name}.s $opts ">&dump.out"
- if { [regexp_diff "dump.out" "${file}.l" ""] } then {
+ if { [regexp_diff "dump.out" "${file}.l"] } then {
fail $testname
verbose "output is [file_contents "dump.out"]" 2
return
}
set file $srcdir/$subdir/$name
gas_run_stdin ${name}.s $opts ">&dump.out"
- if { [regexp_diff "dump.out" "${file}.l" ""] } then {
+ if { [regexp_diff "dump.out" "${file}.l"] } then {
fail $testname
verbose "output is [file_contents "dump.out"]" 2
return
2010-11-20 Richard Sandiford <rdsandiford@googlemail.com>
+ * lib/ld-lib.exp (regexp_diff, simple_diff): Delete.
+
+2010-11-20 Richard Sandiford <rdsandiford@googlemail.com>
+
* lib/ld-lib.exp (load_common_lib): New function. Load
binutils-common.exp.
(is_elf_format, is_elf64, is_aout_format, is_pecoff_format): Delete.
return $flags
}
-# Compares two files line-by-line.
-# Returns differences if exist.
-# Returns null if file(s) cannot be opened.
-#
-proc simple_diff { file_1 file_2 } {
- global target
-
- set eof -1
- set differences 0
-
- if [file exists $file_1] then {
- set file_a [open $file_1 r]
- } else {
- warning "$file_1 doesn't exist"
- return
- }
-
- if [file exists $file_2] then {
- set file_b [open $file_2 r]
- } else {
- fail "$file_2 doesn't exist"
- return
- }
-
- verbose "# Diff'ing: $file_1 $file_2\n" 2
-
- while { [gets $file_a line] != $eof } {
- if [regexp "^#.*$" $line] then {
- continue
- } else {
- lappend list_a $line
- }
- }
- close $file_a
-
- while { [gets $file_b line] != $eof } {
- if [regexp "^#.*$" $line] then {
- continue
- } else {
- lappend list_b $line
- }
- }
- close $file_b
-
- for { set i 0 } { $i < [llength $list_a] } { incr i } {
- set line_a [lindex $list_a $i]
- set line_b [lindex $list_b $i]
-
- verbose "\t$file_1: $i: $line_a\n" 3
- verbose "\t$file_2: $i: $line_b\n" 3
- if [string compare $line_a $line_b] then {
- verbose -log "\t$file_1: $i: $line_a\n"
- verbose -log "\t$file_2: $i: $line_b\n"
-
- fail "Test: $target"
- return
- }
- }
-
- if { [llength $list_a] != [llength $list_b] } {
- fail "Test: $target"
- return
- }
-
- if $differences<1 then {
- pass "Test: $target"
- }
-}
-
# run_dump_test FILE
# Copied from gas testsuite, tweaked and further extended.
#
#
# After the option lines come regexp lines. `run_dump_test' calls
# `regexp_diff' to compare the output of the dumping tool against the
-# regexps in FILE.d. `regexp_diff' is defined later in this file; see
-# further comments there.
+# regexps in FILE.d. `regexp_diff' is defined in binutils-common.exp;
+# see further comments there.
#
proc run_dump_test { name } {
global subdir srcdir
return $opt_array
}
-# regexp_diff, copied from gas, based on simple_diff above.
-# compares two files line-by-line
-# file1 contains strings, file2 contains regexps and #-comments
-# blank lines are ignored in either file
-# returns non-zero if differences exist
-#
-proc regexp_diff { file_1 file_2 } {
-
- set eof -1
- set end_1 0
- set end_2 0
- set differences 0
- set diff_pass 0
- set fail_if_match 0
-
- if [file exists $file_1] then {
- set file_a [open $file_1 r]
- } else {
- warning "$file_1 doesn't exist"
- return 1
- }
-
- if [file exists $file_2] then {
- set file_b [open $file_2 r]
- } else {
- fail "$file_2 doesn't exist"
- close $file_a
- return 1
- }
-
- verbose " Regexp-diff'ing: $file_1 $file_2" 2
-
- while { 1 } {
- set line_a ""
- set line_b ""
- while { [string length $line_a] == 0 } {
- if { [gets $file_a line_a] == $eof } {
- set end_1 1
- break
- }
- }
- while { [string length $line_b] == 0 || [string match "#*" $line_b] } {
- if [ string match "#pass" $line_b ] {
- set end_2 1
- set diff_pass 1
- break
- } elseif [ string match "#failif" $line_b ] {
- send_log "fail if no difference\n"
- verbose "fail if no difference" 3
- set fail_if_match 1
- } elseif [ string match "#..." $line_b ] {
- if { [gets $file_b line_b] == $eof } {
- set end_2 1
- set diff_pass 1
- break
- }
- verbose "looking for \"^$line_b$\"" 3
- while { ![regexp "^$line_b$" "$line_a"] } {
- verbose "skipping \"$line_a\"" 3
- if { [gets $file_a line_a] == $eof } {
- set end_1 1
- break
- }
- }
- break
- }
- if { [gets $file_b line_b] == $eof } {
- set end_2 1
- break
- }
- }
-
- if { $diff_pass } {
- break
- } elseif { $end_1 && $end_2 } {
- break
- } elseif { $end_1 } {
- send_log "extra regexps in $file_2 starting with \"^$line_b$\"\nEOF from $file_1\n"
- verbose "extra regexps in $file_2 starting with \"^$line_b$\"\nEOF from $file_1" 3
- set differences 1
- break
- } elseif { $end_2 } {
- send_log "extra lines in $file_1 starting with \"^$line_a$\"\nEOF from $file_2\n"
- verbose "extra lines in $file_1 starting with \"^$line_a$\"\nEOF from $file_2\n" 3
- set differences 1
- break
- } else {
- verbose "regexp \"^$line_b$\"\nline \"$line_a\"" 3
- if ![regexp "^$line_b$" "$line_a"] {
- verbose "regexp_diff match failure\n" 3
- send_log "regexp_diff match failure\n"
- send_log "regexp \"^$line_b$\"\nline \"$line_a\"\n"
- set differences 1
- }
- }
- }
-
- if { $differences == 0 && !$diff_pass && [eof $file_a] != [eof $file_b] } {
- send_log "$file_1 and $file_2 are different lengths\n"
- verbose "$file_1 and $file_2 are different lengths" 3
- set differences 1
- }
-
- if { $fail_if_match } {
- if { $differences == 0 } {
- set differences 1
- } else {
- set differences 0
- }
- }
-
- close $file_a
- close $file_b
-
- return $differences
-}
-
proc file_contents { filename } {
set file [open $filename r]
set contents [read $file]