mtd: spi-nor: Rename s25hx_t prefix

Rename s25hx_t prefix to s25 so that the single set of fixup hooks can
support all other S25 families.

Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Acked-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>

diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c
index a319825..7d42ba9 100644 (file)
--- a/drivers/mtd/spi/spi-nor-core.c
+++ b/drivers/mtd/spi/spi-nor-core.c
@@ -3195,7 +3195,7 @@ static int spi_nor_setup(struct spi_nor *nor, const struct flash_info *info,
 }
 
 #ifdef CONFIG_SPI_FLASH_SPANSION
-static int s25hx_t_mdp_ready(struct spi_nor *nor)
+static int s25_mdp_ready(struct spi_nor *nor)
 {
        u32 addr;
        int ret;
@@ -3209,7 +3209,7 @@ static int s25hx_t_mdp_ready(struct spi_nor *nor)
        return 1;
 }
 
-static int s25hx_t_quad_enable(struct spi_nor *nor)
+static int s25_quad_enable(struct spi_nor *nor)
 {
        u32 addr;
        int ret;
@@ -3223,15 +3223,15 @@ static int s25hx_t_quad_enable(struct spi_nor *nor)
        return 0;
 }
 
-static int s25hx_t_erase_non_uniform(struct spi_nor *nor, loff_t addr)
+static int s25_erase_non_uniform(struct spi_nor *nor, loff_t addr)
 {
        /* Support 32 x 4KB sectors at bottom */
        return spansion_erase_non_uniform(nor, addr, SPINOR_OP_BE_4K_4B, 0,
                                          SZ_128K);
 }
 
-static int s25hx_t_setup(struct spi_nor *nor, const struct flash_info *info,
-                        const struct spi_nor_flash_parameter *params)
+static int s25_setup(struct spi_nor *nor, const struct flash_info *info,
+                    const struct spi_nor_flash_parameter *params)
 {
        int ret;
        u8 cfr3v;
@@ -3247,27 +3247,27 @@ static int s25hx_t_setup(struct spi_nor *nor, const struct flash_info *info,
        if (ret)
                return ret;
        if (!(cfr3v & CFR3V_UNHYSA))
-               nor->erase = s25hx_t_erase_non_uniform;
+               nor->erase = s25_erase_non_uniform;
 
        /*
         * For the multi-die package parts, the ready() hook is needed to check
         * all dies' status via read any register.
         */
        if (nor->mtd.size > SZ_128M)
-               nor->ready = s25hx_t_mdp_ready;
+               nor->ready = s25_mdp_ready;
 
        return spi_nor_default_setup(nor, info, params);
 }
 
-static void s25hx_t_default_init(struct spi_nor *nor)
+static void s25_default_init(struct spi_nor *nor)
 {
-       nor->setup = s25hx_t_setup;
+       nor->setup = s25_setup;
 }
 
-static int s25hx_t_post_bfpt_fixup(struct spi_nor *nor,
-                                  const struct sfdp_parameter_header *header,
-                                  const struct sfdp_bfpt *bfpt,
-                                  struct spi_nor_flash_parameter *params)
+static int s25_post_bfpt_fixup(struct spi_nor *nor,
+                              const struct sfdp_parameter_header *header,
+                              const struct sfdp_bfpt *bfpt,
+                              struct spi_nor_flash_parameter *params)
 {
        int ret;
        u32 addr;
@@ -3318,21 +3318,21 @@ static int s25hx_t_post_bfpt_fixup(struct spi_nor *nor,
        return 0;
 }
 
-static void s25hx_t_post_sfdp_fixup(struct spi_nor *nor,
-                                   struct spi_nor_flash_parameter *params)
+static void s25_post_sfdp_fixup(struct spi_nor *nor,
+                               struct spi_nor_flash_parameter *params)
 {
        /* READ_FAST_4B (0Ch) requires mode cycles*/
        params->reads[SNOR_CMD_READ_FAST].num_mode_clocks = 8;
        /* PP_1_1_4 is not supported */
        params->hwcaps.mask &= ~SNOR_HWCAPS_PP_1_1_4;
        /* Use volatile register to enable quad */
-       params->quad_enable = s25hx_t_quad_enable;
+       params->quad_enable = s25_quad_enable;
 }
 
-static struct spi_nor_fixups s25hx_t_fixups = {
-       .default_init = s25hx_t_default_init,
-       .post_bfpt = s25hx_t_post_bfpt_fixup,
-       .post_sfdp = s25hx_t_post_sfdp_fixup,
+static struct spi_nor_fixups s25_fixups = {
+       .default_init = s25_default_init,
+       .post_bfpt = s25_post_bfpt_fixup,
+       .post_sfdp = s25_post_sfdp_fixup,
 };
 
 static int s25fl256l_setup(struct spi_nor *nor, const struct flash_info *info,
@@ -3850,7 +3850,7 @@ void spi_nor_set_fixups(struct spi_nor *nor)
                switch (nor->info->id[1]) {
                case 0x2a: /* S25HL (QSPI, 3.3V) */
                case 0x2b: /* S25HS (QSPI, 1.8V) */
-                       nor->fixups = &s25hx_t_fixups;
+                       nor->fixups = &s25_fixups;
                        break;
 
 #ifdef CONFIG_SPI_FLASH_S28HX_T