arm64: dts: renesas: condor: switch from EtherAVB to GEther

The "official" Condor boards have always been wired to mount NFS via
GEther, not EtherAVB -- the boards resoldered for EtherAVB were local
to Cogent Embedded, so we've been having an unpleasant situation where
a "normal" Condor board still can't mount NFS (unless an EtherAVB PHY
extension board is plugged in). Switch from EtherAVB to GEther at last!

Fixes: 8091788f3d38 ("arm64: dts: renesas: condor: add EtherAVB support")
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

diff --git a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
index fe2e2c0..5a7012b 100644 (file)
--- a/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77980-condor.dts
@@ -15,7 +15,7 @@
 
        aliases {
                serial0 = &scif0;
-               ethernet0 = &avb;
+               ethernet0 = &gether;
        };
 
        chosen {
@@ -97,23 +97,6 @@
        };
 };
 
-&avb {
-       pinctrl-0 = <&avb_pins>;
-       pinctrl-names = "default";
-
-       phy-mode = "rgmii-id";
-       phy-handle = <&phy0>;
-       renesas,no-ether-link;
-       status = "okay";
-
-       phy0: ethernet-phy@0 {
-               rxc-skew-ps = <1500>;
-               reg = <0>;
-               interrupt-parent = <&gpio1>;
-               interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
-       };
-};
-
 &canfd {
        pinctrl-0 = <&canfd0_pins>;
        pinctrl-names = "default";
@@ -139,6 +122,23 @@
        clock-frequency = <32768>;
 };
 
+&gether {
+       pinctrl-0 = <&gether_pins>;
+       pinctrl-names = "default";
+
+       phy-mode = "rgmii-id";
+       phy-handle = <&phy0>;
+       renesas,no-ether-link;
+       status = "okay";
+
+       phy0: ethernet-phy@0 {
+               rxc-skew-ps = <1500>;
+               reg = <0>;
+               interrupt-parent = <&gpio4>;
+               interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+       };
+};
+
 &i2c0 {
        pinctrl-0 = <&i2c0_pins>;
        pinctrl-names = "default";
@@ -236,16 +236,17 @@
 };
 
 &pfc {
-       avb_pins: avb {
-               groups = "avb_mdio", "avb_rgmii";
-               function = "avb";
-       };
-
        canfd0_pins: canfd0 {
                groups = "canfd0_data_a";
                function = "canfd0";
        };
 
+       gether_pins: gether {
+               groups = "gether_mdio_a", "gether_rgmii",
+                        "gether_txcrefclk", "gether_txcrefclk_mega";
+               function = "gether";
+       };
+
        i2c0_pins: i2c0 {
                groups = "i2c0";
                function = "i2c0";