ARM64: dts: marvell: Add network support for Armada 3700
authorGregory CLEMENT <gregory.clement@free-electrons.com>
Thu, 1 Dec 2016 17:03:10 +0000 (18:03 +0100)
committerDavid S. Miller <davem@davemloft.net>
Fri, 2 Dec 2016 18:52:01 +0000 (13:52 -0500)
Add neta nodes for network support both in device tree for the SoC and
the board.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
arch/arm64/boot/dts/marvell/armada-3720-db.dts
arch/arm64/boot/dts/marvell/armada-37xx.dtsi

index 1372e9a..a59d36c 100644 (file)
 &pcie0 {
        status = "okay";
 };
+
+&mdio {
+       status = "okay";
+       phy0: ethernet-phy@0 {
+               reg = <0>;
+       };
+
+       phy1: ethernet-phy@1 {
+               reg = <1>;
+       };
+};
+
+&eth0 {
+       phy-mode = "rgmii-id";
+       phy = <&phy0>;
+       status = "okay";
+};
+
+&eth1 {
+       phy-mode = "sgmii";
+       phy = <&phy1>;
+       status = "okay";
+};
index e9bd587..3b8eb45 100644 (file)
                                };
                        };
 
+                       eth0: ethernet@30000 {
+                                  compatible = "marvell,armada-3700-neta";
+                                  reg = <0x30000 0x4000>;
+                                  interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+                                  clocks = <&sb_periph_clk 8>;
+                                  status = "disabled";
+                       };
+
+                       mdio: mdio@32004 {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               compatible = "marvell,orion-mdio";
+                               reg = <0x32004 0x4>;
+                       };
+
+                       eth1: ethernet@40000 {
+                               compatible = "marvell,armada-3700-neta";
+                               reg = <0x40000 0x4000>;
+                               interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+                               clocks = <&sb_periph_clk 7>;
+                               status = "disabled";
+                       };
+
                        usb3: usb@58000 {
                                compatible = "marvell,armada3700-xhci",
                                "generic-xhci";