dtb-$(CONFIG_BOARD_SAGEM_FAST1704) += sagem,f@st1704.dtb
dtb-$(CONFIG_BOARD_TPLINK_WDR4300) += tplink_wdr4300.dtb
dtb-$(CONFIG_TARGET_JZ4780_CI20) += ci20.dtb
+dtb-$(CONFIG_SOC_LUTON) += luton_pcb090.dtb luton_pcb091.dtb
+dtb-$(CONFIG_SOC_OCELOT) += ocelot_pcb120.dtb ocelot_pcb123.dtb
targets += $(dtb-y)
config SYS_SOC
default "mscc"
+choice
+
+ prompt "SOC Family Variant"
+
config SOC_OCELOT
- bool
+ bool "Ocelot SOC Family"
select SOC_VCOREIII
+ select DESIGNWARE_SPI
help
This supports MSCC Ocelot family of SOCs.
config SOC_LUTON
- bool
+ bool "Luton SOC Family"
select SOC_VCOREIII
+ select MSCC_BITBANG_SPI_GPIO
help
This supports MSCC Luton family of SOCs.
+endchoice
+
config SYS_CONFIG_NAME
default "vcoreiii"
choice
- prompt "Board select"
-
-config TARGET_OCELOT_PCB120
- bool "MSCC PCB120 Reference Board (aka VSC5635EV)"
- select SOC_OCELOT
- help
- When selected, CONFIG_DEFAULT_DEVICE_TREE should be set to
- ocelot_pcb120
-
-config TARGET_OCELOT_PCB123
- bool "MSCC PCB123 Reference Board (aka VSC7514EV))"
- select SOC_OCELOT
- help
- When selected, CONFIG_DEFAULT_DEVICE_TREE should be set to
- ocelot_pcb123
-
-config TARGET_LUTON_PCB091
- bool "MSCC PCB091 Reference Board"
- select SOC_LUTON
- select MSCC_BITBANG_SPI_GPIO
- help
- When selected, CONFIG_DEFAULT_DEVICE_TREE should be set to
- luton_pcb091
-endchoice
-
-choice
prompt "DDR type"
config DDRTYPE_H5TQ4G63MFR
#define GPIO_ALT(x) (0x88 + 4 * (x))
+#define CHIP_ID (0x08)
+
#endif
#include <common.h>
#include <asm/io.h>
-#define MSCC_GPIO_ALT0 0x88
-#define MSCC_GPIO_ALT1 0x8C
-
DECLARE_GLOBAL_DATA_PTR;
+enum {
+ BOARD_TYPE_PCB090 = 0xAABBCD00,
+ BOARD_TYPE_PCB091,
+};
+
void board_debug_uart_init(void)
{
/* too early for the pinctrl driver, so configure the UART pins here */
- setbits_le32(BASE_DEVCPU_GCB + MSCC_GPIO_ALT0, BIT(30) | BIT(31));
+ mscc_gpio_set_alternate(30, 1);
+ mscc_gpio_set_alternate(31, 1);
}
int board_early_init_r(void)
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE;
return 0;
}
+
+static void do_board_detect(void)
+{
+ u32 chipid = (readl(BASE_DEVCPU_GCB + CHIP_ID) >> 12) & 0xFFFF;
+
+ if (chipid == 0x7428 || chipid == 0x7424)
+ gd->board_type = BOARD_TYPE_PCB091; // Lu10
+ else
+ gd->board_type = BOARD_TYPE_PCB090; // Lu26
+}
+
+#if defined(CONFIG_MULTI_DTB_FIT)
+int board_fit_config_name_match(const char *name)
+{
+ if (gd->board_type == BOARD_TYPE_PCB090 &&
+ strcmp(name, "luton_pcb090") == 0)
+ return 0;
+
+ if (gd->board_type == BOARD_TYPE_PCB091 &&
+ strcmp(name, "luton_pcb091") == 0)
+ return 0;
+
+ return -1;
+}
+#endif
+
+#if defined(CONFIG_DTB_RESELECT)
+int embedded_dtb_select(void)
+{
+ do_board_detect();
+ fdtdec_setup();
+
+ return 0;
+}
+#endif
DECLARE_GLOBAL_DATA_PTR;
-#define MSCC_GPIO_ALT0 0x54
-#define MSCC_GPIO_ALT1 0x58
+enum {
+ BOARD_TYPE_PCB120 = 0xAABBCC00,
+ BOARD_TYPE_PCB123,
+};
void external_cs_manage(struct udevice *dev, bool enable)
{
u32 cs = spi_chip_select(dev);
/* IF_SI0_OWNER, select the owner of the SI interface
* Encoding: 0: SI Slave
- * 1: SI Boot Master
- * 2: SI Master Controller
+ * 1: SI Boot Master
+ * 2: SI Master Controller
*/
if (!enable) {
writel(ICPU_SW_MODE_SW_PIN_CTRL_MODE |
void board_debug_uart_init(void)
{
/* too early for the pinctrl driver, so configure the UART pins here */
- setbits_le32(BASE_DEVCPU_GCB + MSCC_GPIO_ALT0, BIT(6) | BIT(7));
- clrbits_le32(BASE_DEVCPU_GCB + MSCC_GPIO_ALT1, BIT(6) | BIT(7));
+ mscc_gpio_set_alternate(6, 1);
+ mscc_gpio_set_alternate(7, 1);
}
int board_early_init_r(void)
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE;
return 0;
}
+
+static void do_board_detect(void)
+{
+ u16 dummy = 0;
+
+ /* Enable MIIM */
+ mscc_gpio_set_alternate(14, 1);
+ mscc_gpio_set_alternate(15, 1);
+ if (mscc_phy_rd(1, 0, 0, &dummy) == 0)
+ gd->board_type = BOARD_TYPE_PCB120;
+ else
+ gd->board_type = BOARD_TYPE_PCB123;
+}
+
+#if defined(CONFIG_MULTI_DTB_FIT)
+int board_fit_config_name_match(const char *name)
+{
+ if (gd->board_type == BOARD_TYPE_PCB120 &&
+ strcmp(name, "ocelot_pcb120") == 0)
+ return 0;
+
+ if (gd->board_type == BOARD_TYPE_PCB123 &&
+ strcmp(name, "ocelot_pcb123") == 0)
+ return 0;
+
+ return -1;
+}
+#endif
+
+#if defined(CONFIG_DTB_RESELECT)
+int embedded_dtb_select(void)
+{
+ do_board_detect();
+ fdtdec_setup();
+
+ return 0;
+}
+#endif
CONFIG_DEBUG_UART_BASE=0x70100000
CONFIG_DEBUG_UART_CLOCK=208333333
CONFIG_ARCH_MSCC=y
-CONFIG_TARGET_LUTON_PCB091=y
+CONFIG_SOC_LUTON=y
CONFIG_DDRTYPE_MT47H128M8HQ=y
CONFIG_SYS_LITTLE_ENDIAN=y
CONFIG_MIPS_BOOT_FDT=y
CONFIG_BOOTARGS="console=ttyS0,115200"
CONFIG_LOGLEVEL=7
CONFIG_DISPLAY_CPUINFO=y
-CONFIG_SYS_PROMPT="pcb091 # "
+CONFIG_SYS_PROMPT="luton # "
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_ELF is not set
CONFIG_MTDPARTS_DEFAULT="mtdparts=spi_flash:512k(UBoot),256k(Env),256k(conf),6m@1m(linux)"
# CONFIG_ISO_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="luton_pcb091"
+CONFIG_OF_LIST="luton_pcb090 luton_pcb091"
+CONFIG_DTB_RESELECT=y
+CONFIG_MULTI_DTB_FIT=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_CLK=y
CONFIG_DEBUG_UART_BASE=0x70100000
CONFIG_DEBUG_UART_CLOCK=250000000
CONFIG_ARCH_MSCC=y
-CONFIG_TARGET_OCELOT_PCB123=y
CONFIG_SYS_LITTLE_ENDIAN=y
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_BOOTARGS="console=ttyS0,115200"
CONFIG_LOGLEVEL=7
CONFIG_DISPLAY_CPUINFO=y
-CONFIG_SYS_PROMPT="pcb123 # "
+CONFIG_SYS_PROMPT="ocelot # "
# CONFIG_CMD_BDI is not set
# CONFIG_CMD_CONSOLE is not set
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_UBIFS is not set
# CONFIG_ISO_PARTITION is not set
CONFIG_DEFAULT_DEVICE_TREE="ocelot_pcb123"
+CONFIG_OF_LIST="ocelot_pcb120 ocelot_pcb123"
+CONFIG_DTB_RESELECT=y
+CONFIG_MULTI_DTB_FIT=y
CONFIG_ENV_IS_IN_SPI_FLASH=y
CONFIG_NET_RANDOM_ETHADDR=y
CONFIG_CLK=y
CONFIG_SYS_NS16550=y
CONFIG_SPI=y
CONFIG_DM_SPI=y
-CONFIG_DESIGNWARE_SPI=y
CONFIG_LZMA=y
+++ /dev/null
-CONFIG_MIPS=y
-CONFIG_SYS_TEXT_BASE=0x40000000
-CONFIG_SYS_MALLOC_F_LEN=0x2000
-CONFIG_ARCH_MSCC=y
-CONFIG_SYS_LITTLE_ENDIAN=y
-CONFIG_FIT=y
-CONFIG_BOOTDELAY=3
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttyS0,115200"
-CONFIG_LOGLEVEL=7
-CONFIG_DISPLAY_CPUINFO=y
-CONFIG_SYS_PROMPT="pcb120 # "
-# CONFIG_CMD_BDI is not set
-# CONFIG_CMD_CONSOLE is not set
-# CONFIG_CMD_ELF is not set
-# CONFIG_CMD_EXPORTENV is not set
-# CONFIG_CMD_IMPORTENV is not set
-# CONFIG_CMD_CRC32 is not set
-CONFIG_CMD_MD5SUM=y
-CONFIG_CMD_MEMINFO=y
-CONFIG_CMD_MEMTEST=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_GPIO=y
-CONFIG_CMD_MTD=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_SPI=y
-CONFIG_CMD_DHCP=y
-# CONFIG_NET_TFTP_VARS is not set
-# CONFIG_CMD_NFS is not set
-CONFIG_CMD_PING=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nor0=spi_flash"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=spi_flash:512k(UBoot),256k(Env),256k(conf),15m(linux),15m(linux.bk)"
-CONFIG_CMD_UBI=y
-# CONFIG_CMD_UBIFS is not set
-# CONFIG_ISO_PARTITION is not set
-CONFIG_DEFAULT_DEVICE_TREE="ocelot_pcb120"
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_CLK=y
-CONFIG_DM_GPIO=y
-CONFIG_MTD=y
-CONFIG_MTD_SPI_NAND=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH=y
-CONFIG_SPI_FLASH_BAR=y
-CONFIG_SPI_FLASH_GIGADEVICE=y
-CONFIG_SPI_FLASH_MACRONIX=y
-CONFIG_SPI_FLASH_SPANSION=y
-CONFIG_SPI_FLASH_WINBOND=y
-CONFIG_SPI_FLASH_MTD=y
-CONFIG_DM_ETH=y
-CONFIG_PINCTRL=y
-CONFIG_PINCONF=y
-CONFIG_DM_SERIAL=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_DESIGNWARE_SPI=y
-CONFIG_LZMA=y
#endif
#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_MIPS_TIMER_FREQ
+#define CONFIG_BOARD_TYPES
+
#if defined(CONFIG_ENV_IS_IN_SPI_FLASH) && !defined(CONFIG_ENV_OFFSET)
#define CONFIG_ENV_OFFSET (1024 * 1024)
#define CONFIG_ENV_SIZE (256 * 1024)
projects / platform / kernel / u-boot.git / commitdiff