serial: tegra: add serial driver
authorLaxman Dewangan <ldewangan@nvidia.com>
Tue, 8 Jan 2013 10:57:44 +0000 (16:27 +0530)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Wed, 16 Jan 2013 06:15:17 +0000 (22:15 -0800)
NVIDIA's Tegra has multiple UART controller which supports:
- APB DMA based controller fifo read/write.
- End Of Data interrupt in incoming data to know whether end
  of frame achieve or not.
- HW controlled RTS and CTS flow control to reduce SW overhead.

Add serial driver to use all above feature.

Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Acked-by: Alan Cox <alan@linux.intel.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt [new file with mode: 0644]
drivers/tty/serial/Kconfig
drivers/tty/serial/Makefile
drivers/tty/serial/serial-tegra.c [new file with mode: 0644]

diff --git a/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt b/Documentation/devicetree/bindings/serial/nvidia,tegra20-hsuart.txt
new file mode 100644 (file)
index 0000000..392a449
--- /dev/null
@@ -0,0 +1,24 @@
+NVIDIA Tegra20/Tegra30 high speed (DMA based) UART controller driver.
+
+Required properties:
+- compatible : should be "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart".
+- reg: Should contain UART controller registers location and length.
+- interrupts: Should contain UART controller interrupts.
+- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
+  request selector for this UART controller.
+
+Optional properties:
+- nvidia,enable-modem-interrupt: Enable modem interrupts. Should be enable
+               only if all 8 lines of UART controller are pinmuxed.
+
+Example:
+
+serial@70006000 {
+       compatible = "nvidia,tegra30-hsuart", "nvidia,tegra20-hsuart";
+       reg = <0x70006000 0x40>;
+       reg-shift = <2>;
+       interrupts = <0 36 0x04>;
+       nvidia,dma-request-selector = <&apbdma 8>;
+       nvidia,enable-modem-interrupt;
+       status = "disabled";
+};
index 59c23d0..aff3cd3 100644 (file)
@@ -269,6 +269,17 @@ config SERIAL_SIRFSOC_CONSOLE
           your boot loader about how to pass options to the kernel at
           boot time.)
 
+config SERIAL_TEGRA
+       tristate "NVIDIA Tegra20/30 SoC serial controller"
+       depends on ARCH_TEGRA && TEGRA20_APB_DMA
+       select SERIAL_CORE
+       help
+         Support for the on-chip UARTs on the NVIDIA Tegra series SOCs
+         providing /dev/ttyHS0, 1, 2, 3 and 4 (note, some machines may not
+         provide all of these ports, depending on how the serial port
+         are enabled). This driver uses the APB DMA to achieve higher baudrate
+         and better performance.
+
 config SERIAL_MAX3100
        tristate "MAX3100 support"
        depends on SPI
index df1b998..82e4306 100644 (file)
@@ -80,6 +80,7 @@ obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o
 obj-$(CONFIG_SERIAL_LANTIQ)    += lantiq.o
 obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o
 obj-$(CONFIG_SERIAL_SIRFSOC) += sirfsoc_uart.o
+obj-$(CONFIG_SERIAL_TEGRA) += serial-tegra.o
 obj-$(CONFIG_SERIAL_AR933X)   += ar933x_uart.o
 obj-$(CONFIG_SERIAL_EFM32_UART) += efm32-uart.o
 obj-$(CONFIG_SERIAL_ARC)       += arc_uart.o
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
new file mode 100644 (file)
index 0000000..cc4072f
--- /dev/null
@@ -0,0 +1,1399 @@
+/*
+ * serial_tegra.c
+ *
+ * High-speed serial driver for NVIDIA Tegra SoCs
+ *
+ * Copyright (c) 2012-2013, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pagemap.h>
+#include <linux/platform_device.h>
+#include <linux/serial.h>
+#include <linux/serial_8250.h>
+#include <linux/serial_core.h>
+#include <linux/serial_reg.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/termios.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+
+#include <mach/clk.h>
+
+#define TEGRA_UART_TYPE                                "TEGRA_UART"
+#define TX_EMPTY_STATUS                                (UART_LSR_TEMT | UART_LSR_THRE)
+#define BYTES_TO_ALIGN(x)                      ((unsigned long)(x) & 0x3)
+
+#define TEGRA_UART_RX_DMA_BUFFER_SIZE          4096
+#define TEGRA_UART_LSR_TXFIFO_FULL             0x100
+#define TEGRA_UART_IER_EORD                    0x20
+#define TEGRA_UART_MCR_RTS_EN                  0x40
+#define TEGRA_UART_MCR_CTS_EN                  0x20
+#define TEGRA_UART_LSR_ANY                     (UART_LSR_OE | UART_LSR_BI | \
+                                               UART_LSR_PE | UART_LSR_FE)
+#define TEGRA_UART_IRDA_CSR                    0x08
+#define TEGRA_UART_SIR_ENABLED                 0x80
+
+#define TEGRA_UART_TX_PIO                      1
+#define TEGRA_UART_TX_DMA                      2
+#define TEGRA_UART_MIN_DMA                     16
+#define TEGRA_UART_FIFO_SIZE                   32
+
+/*
+ * Tx fifo trigger level setting in tegra uart is in
+ * reverse way then conventional uart.
+ */
+#define TEGRA_UART_TX_TRIG_16B                 0x00
+#define TEGRA_UART_TX_TRIG_8B                  0x10
+#define TEGRA_UART_TX_TRIG_4B                  0x20
+#define TEGRA_UART_TX_TRIG_1B                  0x30
+
+#define TEGRA_UART_MAXIMUM                     5
+
+/* Default UART setting when started: 115200 no parity, stop, 8 data bits */
+#define TEGRA_UART_DEFAULT_BAUD                        115200
+#define TEGRA_UART_DEFAULT_LSR                 UART_LCR_WLEN8
+
+/* Tx transfer mode */
+#define TEGRA_TX_PIO                           1
+#define TEGRA_TX_DMA                           2
+
+/**
+ * tegra_uart_chip_data: SOC specific data.
+ *
+ * @tx_fifo_full_status: Status flag available for checking tx fifo full.
+ * @allow_txfifo_reset_fifo_mode: allow_tx fifo reset with fifo mode or not.
+ *                     Tegra30 does not allow this.
+ * @support_clk_src_div: Clock source support the clock divider.
+ */
+struct tegra_uart_chip_data {
+       bool    tx_fifo_full_status;
+       bool    allow_txfifo_reset_fifo_mode;
+       bool    support_clk_src_div;
+};
+
+struct tegra_uart_port {
+       struct uart_port                        uport;
+       const struct tegra_uart_chip_data       *cdata;
+
+       struct clk                              *uart_clk;
+       unsigned int                            current_baud;
+
+       /* Register shadow */
+       unsigned long                           fcr_shadow;
+       unsigned long                           mcr_shadow;
+       unsigned long                           lcr_shadow;
+       unsigned long                           ier_shadow;
+       bool                                    rts_active;
+
+       int                                     tx_in_progress;
+       unsigned int                            tx_bytes;
+
+       bool                                    enable_modem_interrupt;
+
+       bool                                    rx_timeout;
+       int                                     rx_in_progress;
+       int                                     symb_bit;
+       int                                     dma_req_sel;
+
+       struct dma_chan                         *rx_dma_chan;
+       struct dma_chan                         *tx_dma_chan;
+       dma_addr_t                              rx_dma_buf_phys;
+       dma_addr_t                              tx_dma_buf_phys;
+       unsigned char                           *rx_dma_buf_virt;
+       unsigned char                           *tx_dma_buf_virt;
+       struct dma_async_tx_descriptor          *tx_dma_desc;
+       struct dma_async_tx_descriptor          *rx_dma_desc;
+       dma_cookie_t                            tx_cookie;
+       dma_cookie_t                            rx_cookie;
+       int                                     tx_bytes_requested;
+       int                                     rx_bytes_requested;
+};
+
+static void tegra_uart_start_next_tx(struct tegra_uart_port *tup);
+static int tegra_uart_start_rx_dma(struct tegra_uart_port *tup);
+
+static inline unsigned long tegra_uart_read(struct tegra_uart_port *tup,
+               unsigned long reg)
+{
+       return readl(tup->uport.membase + (reg << tup->uport.regshift));
+}
+
+static inline void tegra_uart_write(struct tegra_uart_port *tup, unsigned val,
+       unsigned long reg)
+{
+       writel(val, tup->uport.membase + (reg << tup->uport.regshift));
+}
+
+static inline struct tegra_uart_port *to_tegra_uport(struct uart_port *u)
+{
+       return container_of(u, struct tegra_uart_port, uport);
+}
+
+static unsigned int tegra_uart_get_mctrl(struct uart_port *u)
+{
+       struct tegra_uart_port *tup = to_tegra_uport(u);
+
+       /*
+        * RI - Ring detector is active
+        * CD/DCD/CAR - Carrier detect is always active. For some reason
+        *      linux has different names for carrier detect.
+        * DSR - Data Set ready is active as the hardware doesn't support it.
+        *      Don't know if the linux support this yet?
+        * CTS - Clear to send. Always set to active, as the hardware handles
+        *      CTS automatically.
+        */
+       if (tup->enable_modem_interrupt)
+               return TIOCM_RI | TIOCM_CD | TIOCM_DSR | TIOCM_CTS;
+       return TIOCM_CTS;
+}
+
+static void set_rts(struct tegra_uart_port *tup, bool active)
+{
+       unsigned long mcr;
+
+       mcr = tup->mcr_shadow;
+       if (active)
+               mcr |= TEGRA_UART_MCR_RTS_EN;
+       else
+               mcr &= ~TEGRA_UART_MCR_RTS_EN;
+       if (mcr != tup->mcr_shadow) {
+               tegra_uart_write(tup, mcr, UART_MCR);
+               tup->mcr_shadow = mcr;
+       }
+       return;
+}
+
+static void set_dtr(struct tegra_uart_port *tup, bool active)
+{
+       unsigned long mcr;
+
+       mcr = tup->mcr_shadow;
+       if (active)
+               mcr |= UART_MCR_DTR;
+       else
+               mcr &= ~UART_MCR_DTR;
+       if (mcr != tup->mcr_shadow) {
+               tegra_uart_write(tup, mcr, UART_MCR);
+               tup->mcr_shadow = mcr;
+       }
+       return;
+}
+
+static void tegra_uart_set_mctrl(struct uart_port *u, unsigned int mctrl)
+{
+       struct tegra_uart_port *tup = to_tegra_uport(u);
+       unsigned long mcr;
+       int dtr_enable;
+
+       mcr = tup->mcr_shadow;
+       tup->rts_active = !!(mctrl & TIOCM_RTS);
+       set_rts(tup, tup->rts_active);
+
+       dtr_enable = !!(mctrl & TIOCM_DTR);
+       set_dtr(tup, dtr_enable);
+       return;
+}
+
+static void tegra_uart_break_ctl(struct uart_port *u, int break_ctl)
+{
+       struct tegra_uart_port *tup = to_tegra_uport(u);
+       unsigned long lcr;
+
+       lcr = tup->lcr_shadow;
+       if (break_ctl)
+               lcr |= UART_LCR_SBC;
+       else
+               lcr &= ~UART_LCR_SBC;
+       tegra_uart_write(tup, lcr, UART_LCR);
+       tup->lcr_shadow = lcr;
+}
+
+/* Wait for a symbol-time. */
+static void tegra_uart_wait_sym_time(struct tegra_uart_port *tup,
+               unsigned int syms)
+{
+       if (tup->current_baud)
+               udelay(DIV_ROUND_UP(syms * tup->symb_bit * 1000000,
+                       tup->current_baud));
+}
+
+static void tegra_uart_fifo_reset(struct tegra_uart_port *tup, u8 fcr_bits)
+{
+       unsigned long fcr = tup->fcr_shadow;
+
+       if (tup->cdata->allow_txfifo_reset_fifo_mode) {
+               fcr |= fcr_bits & (UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+               tegra_uart_write(tup, fcr, UART_FCR);
+       } else {
+               fcr &= ~UART_FCR_ENABLE_FIFO;
+               tegra_uart_write(tup, fcr, UART_FCR);
+               udelay(60);
+               fcr |= fcr_bits & (UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+               tegra_uart_write(tup, fcr, UART_FCR);
+               fcr |= UART_FCR_ENABLE_FIFO;
+               tegra_uart_write(tup, fcr, UART_FCR);
+       }
+
+       /* Dummy read to ensure the write is posted */
+       tegra_uart_read(tup, UART_SCR);
+
+       /* Wait for the flush to propagate. */
+       tegra_uart_wait_sym_time(tup, 1);
+}
+
+static int tegra_set_baudrate(struct tegra_uart_port *tup, unsigned int baud)
+{
+       unsigned long rate;
+       unsigned int divisor;
+       unsigned long lcr;
+       int ret;
+
+       if (tup->current_baud == baud)
+               return 0;
+
+       if (tup->cdata->support_clk_src_div) {
+               rate = baud * 16;
+               ret = clk_set_rate(tup->uart_clk, rate);
+               if (ret < 0) {
+                       dev_err(tup->uport.dev,
+                               "clk_set_rate() failed for rate %lu\n", rate);
+                       return ret;
+               }
+               divisor = 1;
+       } else {
+               rate = clk_get_rate(tup->uart_clk);
+               divisor = DIV_ROUND_CLOSEST(rate, baud * 16);
+       }
+
+       lcr = tup->lcr_shadow;
+       lcr |= UART_LCR_DLAB;
+       tegra_uart_write(tup, lcr, UART_LCR);
+
+       tegra_uart_write(tup, divisor & 0xFF, UART_TX);
+       tegra_uart_write(tup, ((divisor >> 8) & 0xFF), UART_IER);
+
+       lcr &= ~UART_LCR_DLAB;
+       tegra_uart_write(tup, lcr, UART_LCR);
+
+       /* Dummy read to ensure the write is posted */
+       tegra_uart_read(tup, UART_SCR);
+
+       tup->current_baud = baud;
+
+       /* wait two character intervals at new rate */
+       tegra_uart_wait_sym_time(tup, 2);
+       return 0;
+}
+
+static char tegra_uart_decode_rx_error(struct tegra_uart_port *tup,
+                       unsigned long lsr)
+{
+       char flag = TTY_NORMAL;
+
+       if (unlikely(lsr & TEGRA_UART_LSR_ANY)) {
+               if (lsr & UART_LSR_OE) {
+                       /* Overrrun error */
+                       flag |= TTY_OVERRUN;
+                       tup->uport.icount.overrun++;
+                       dev_err(tup->uport.dev, "Got overrun errors\n");
+               } else if (lsr & UART_LSR_PE) {
+                       /* Parity error */
+                       flag |= TTY_PARITY;
+                       tup->uport.icount.parity++;
+                       dev_err(tup->uport.dev, "Got Parity errors\n");
+               } else if (lsr & UART_LSR_FE) {
+                       flag |= TTY_FRAME;
+                       tup->uport.icount.frame++;
+                       dev_err(tup->uport.dev, "Got frame errors\n");
+               } else if (lsr & UART_LSR_BI) {
+                       dev_err(tup->uport.dev, "Got Break\n");
+                       tup->uport.icount.brk++;
+                       /* If FIFO read error without any data, reset Rx FIFO */
+                       if (!(lsr & UART_LSR_DR) && (lsr & UART_LSR_FIFOE))
+                               tegra_uart_fifo_reset(tup, UART_FCR_CLEAR_RCVR);
+               }
+       }
+       return flag;
+}
+
+static int tegra_uart_request_port(struct uart_port *u)
+{
+       return 0;
+}
+
+static void tegra_uart_release_port(struct uart_port *u)
+{
+       /* Nothing to do here */
+}
+
+static void tegra_uart_fill_tx_fifo(struct tegra_uart_port *tup, int max_bytes)
+{
+       struct circ_buf *xmit = &tup->uport.state->xmit;
+       int i;
+
+       for (i = 0; i < max_bytes; i++) {
+               BUG_ON(uart_circ_empty(xmit));
+               if (tup->cdata->tx_fifo_full_status) {
+                       unsigned long lsr = tegra_uart_read(tup, UART_LSR);
+                       if ((lsr & TEGRA_UART_LSR_TXFIFO_FULL))
+                               break;
+               }
+               tegra_uart_write(tup, xmit->buf[xmit->tail], UART_TX);
+               xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+               tup->uport.icount.tx++;
+       }
+}
+
+static void tegra_uart_start_pio_tx(struct tegra_uart_port *tup,
+               unsigned int bytes)
+{
+       if (bytes > TEGRA_UART_MIN_DMA)
+               bytes = TEGRA_UART_MIN_DMA;
+
+       tup->tx_in_progress = TEGRA_UART_TX_PIO;
+       tup->tx_bytes = bytes;
+       tup->ier_shadow |= UART_IER_THRI;
+       tegra_uart_write(tup, tup->ier_shadow, UART_IER);
+}
+
+static void tegra_uart_tx_dma_complete(void *args)
+{
+       struct tegra_uart_port *tup = args;
+       struct circ_buf *xmit = &tup->uport.state->xmit;
+       struct dma_tx_state state;
+       unsigned long flags;
+       int count;
+
+       dmaengine_tx_status(tup->tx_dma_chan, tup->rx_cookie, &state);
+       count = tup->tx_bytes_requested - state.residue;
+       async_tx_ack(tup->tx_dma_desc);
+       spin_lock_irqsave(&tup->uport.lock, flags);
+       xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
+       tup->tx_in_progress = 0;
+       if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+               uart_write_wakeup(&tup->uport);
+       tegra_uart_start_next_tx(tup);
+       spin_unlock_irqrestore(&tup->uport.lock, flags);
+}
+
+static int tegra_uart_start_tx_dma(struct tegra_uart_port *tup,
+               unsigned long count)
+{
+       struct circ_buf *xmit = &tup->uport.state->xmit;
+       dma_addr_t tx_phys_addr;
+
+       dma_sync_single_for_device(tup->uport.dev, tup->tx_dma_buf_phys,
+                               UART_XMIT_SIZE, DMA_TO_DEVICE);
+
+       tup->tx_bytes = count & ~(0xF);
+       tx_phys_addr = tup->tx_dma_buf_phys + xmit->tail;
+       tup->tx_dma_desc = dmaengine_prep_slave_single(tup->tx_dma_chan,
+                               tx_phys_addr, tup->tx_bytes, DMA_MEM_TO_DEV,
+                               DMA_PREP_INTERRUPT);
+       if (!tup->tx_dma_desc) {
+               dev_err(tup->uport.dev, "Not able to get desc for Tx\n");
+               return -EIO;
+       }
+
+       tup->tx_dma_desc->callback = tegra_uart_tx_dma_complete;
+       tup->tx_dma_desc->callback_param = tup;
+       tup->tx_in_progress = TEGRA_UART_TX_DMA;
+       tup->tx_bytes_requested = tup->tx_bytes;
+       tup->tx_cookie = dmaengine_submit(tup->tx_dma_desc);
+       dma_async_issue_pending(tup->tx_dma_chan);
+       return 0;
+}
+
+static void tegra_uart_start_next_tx(struct tegra_uart_port *tup)
+{
+       unsigned long tail;
+       unsigned long count;
+       struct circ_buf *xmit = &tup->uport.state->xmit;
+
+       tail = (unsigned long)&xmit->buf[xmit->tail];
+       count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
+       if (!count)
+               return;
+
+       if (count < TEGRA_UART_MIN_DMA)
+               tegra_uart_start_pio_tx(tup, count);
+       else if (BYTES_TO_ALIGN(tail) > 0)
+               tegra_uart_start_pio_tx(tup, BYTES_TO_ALIGN(tail));
+       else
+               tegra_uart_start_tx_dma(tup, count);
+}
+
+/* Called by serial core driver with u->lock taken. */
+static void tegra_uart_start_tx(struct uart_port *u)
+{
+       struct tegra_uart_port *tup = to_tegra_uport(u);
+       struct circ_buf *xmit = &u->state->xmit;
+
+       if (!uart_circ_empty(xmit) && !tup->tx_in_progress)
+               tegra_uart_start_next_tx(tup);
+}
+
+static unsigned int tegra_uart_tx_empty(struct uart_port *u)
+{
+       struct tegra_uart_port *tup = to_tegra_uport(u);
+       unsigned int ret = 0;
+       unsigned long flags;
+
+       spin_lock_irqsave(&u->lock, flags);
+       if (!tup->tx_in_progress) {
+               unsigned long lsr = tegra_uart_read(tup, UART_LSR);
+               if ((lsr & TX_EMPTY_STATUS) == TX_EMPTY_STATUS)
+                       ret = TIOCSER_TEMT;
+       }
+       spin_unlock_irqrestore(&u->lock, flags);
+       return ret;
+}
+
+static void tegra_uart_stop_tx(struct uart_port *u)
+{
+       struct tegra_uart_port *tup = to_tegra_uport(u);
+       struct circ_buf *xmit = &tup->uport.state->xmit;
+       struct dma_tx_state state;
+       int count;
+
+       dmaengine_terminate_all(tup->tx_dma_chan);
+       dmaengine_tx_status(tup->tx_dma_chan, tup->tx_cookie, &state);
+       count = tup->tx_bytes_requested - state.residue;
+       async_tx_ack(tup->tx_dma_desc);
+       xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
+       tup->tx_in_progress = 0;
+       return;
+}
+
+static void tegra_uart_handle_tx_pio(struct tegra_uart_port *tup)
+{
+       struct circ_buf *xmit = &tup->uport.state->xmit;
+
+       tegra_uart_fill_tx_fifo(tup, tup->tx_bytes);
+       tup->tx_in_progress = 0;
+       if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+               uart_write_wakeup(&tup->uport);
+       tegra_uart_start_next_tx(tup);
+       return;
+}
+
+static void tegra_uart_handle_rx_pio(struct tegra_uart_port *tup,
+               struct tty_struct *tty)
+{
+       do {
+               char flag = TTY_NORMAL;
+               unsigned long lsr = 0;
+               unsigned char ch;
+
+               lsr = tegra_uart_read(tup, UART_LSR);
+               if (!(lsr & UART_LSR_DR))
+                       break;
+
+               flag = tegra_uart_decode_rx_error(tup, lsr);
+               ch = (unsigned char) tegra_uart_read(tup, UART_RX);
+               tup->uport.icount.rx++;
+
+               if (!uart_handle_sysrq_char(&tup->uport, ch) && tty)
+                       tty_insert_flip_char(tty, ch, flag);
+       } while (1);
+
+       return;
+}
+
+static void tegra_uart_copy_rx_to_tty(struct tegra_uart_port *tup,
+               struct tty_struct *tty, int count)
+{
+       int copied;
+
+       tup->uport.icount.rx += count;
+       if (!tty) {
+               dev_err(tup->uport.dev, "No tty port\n");
+               return;
+       }
+       dma_sync_single_for_cpu(tup->uport.dev, tup->rx_dma_buf_phys,
+                               TEGRA_UART_RX_DMA_BUFFER_SIZE, DMA_FROM_DEVICE);
+       copied = tty_insert_flip_string(tty,
+                       ((unsigned char *)(tup->rx_dma_buf_virt)), count);
+       if (copied != count) {
+               WARN_ON(1);
+               dev_err(tup->uport.dev, "RxData copy to tty layer failed\n");
+       }
+       dma_sync_single_for_device(tup->uport.dev, tup->rx_dma_buf_phys,
+                               TEGRA_UART_RX_DMA_BUFFER_SIZE, DMA_TO_DEVICE);
+}
+
+static void tegra_uart_rx_dma_complete(void *args)
+{
+       struct tegra_uart_port *tup = args;
+       struct uart_port *u = &tup->uport;
+       int count = tup->rx_bytes_requested;
+       struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port);
+       unsigned long flags;
+
+       async_tx_ack(tup->rx_dma_desc);
+       spin_lock_irqsave(&u->lock, flags);
+
+       /* Deactivate flow control to stop sender */
+       if (tup->rts_active)
+               set_rts(tup, false);
+
+       /* If we are here, DMA is stopped */
+       if (count)
+               tegra_uart_copy_rx_to_tty(tup, tty, count);
+
+       tegra_uart_handle_rx_pio(tup, tty);
+       if (tty) {
+               tty_flip_buffer_push(tty);
+               tty_kref_put(tty);
+       }
+       tegra_uart_start_rx_dma(tup);
+
+       /* Activate flow control to start transfer */
+       if (tup->rts_active)
+               set_rts(tup, true);
+
+       spin_unlock_irqrestore(&u->lock, flags);
+}
+
+static void tegra_uart_handle_rx_dma(struct tegra_uart_port *tup)
+{
+       struct dma_tx_state state;
+       struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port);
+       int count;
+
+       /* Deactivate flow control to stop sender */
+       if (tup->rts_active)
+               set_rts(tup, false);
+
+       dmaengine_terminate_all(tup->rx_dma_chan);
+       dmaengine_tx_status(tup->rx_dma_chan,  tup->rx_cookie, &state);
+       count = tup->rx_bytes_requested - state.residue;
+
+       /* If we are here, DMA is stopped */
+       if (count)
+               tegra_uart_copy_rx_to_tty(tup, tty, count);
+
+       tegra_uart_handle_rx_pio(tup, tty);
+       if (tty) {
+               tty_flip_buffer_push(tty);
+               tty_kref_put(tty);
+       }
+       tegra_uart_start_rx_dma(tup);
+
+       if (tup->rts_active)
+               set_rts(tup, true);
+}
+
+static int tegra_uart_start_rx_dma(struct tegra_uart_port *tup)
+{
+       unsigned int count = TEGRA_UART_RX_DMA_BUFFER_SIZE;
+
+       tup->rx_dma_desc = dmaengine_prep_slave_single(tup->rx_dma_chan,
+                               tup->rx_dma_buf_phys, count, DMA_DEV_TO_MEM,
+                               DMA_PREP_INTERRUPT);
+       if (!tup->rx_dma_desc) {
+               dev_err(tup->uport.dev, "Not able to get desc for Rx\n");
+               return -EIO;
+       }
+
+       tup->rx_dma_desc->callback = tegra_uart_rx_dma_complete;
+       tup->rx_dma_desc->callback_param = tup;
+       dma_sync_single_for_device(tup->uport.dev, tup->rx_dma_buf_phys,
+                               count, DMA_TO_DEVICE);
+       tup->rx_bytes_requested = count;
+       tup->rx_cookie = dmaengine_submit(tup->rx_dma_desc);
+       dma_async_issue_pending(tup->rx_dma_chan);
+       return 0;
+}
+
+static void tegra_uart_handle_modem_signal_change(struct uart_port *u)
+{
+       struct tegra_uart_port *tup = to_tegra_uport(u);
+       unsigned long msr;
+
+       msr = tegra_uart_read(tup, UART_MSR);
+       if (!(msr & UART_MSR_ANY_DELTA))
+               return;
+
+       if (msr & UART_MSR_TERI)
+               tup->uport.icount.rng++;
+       if (msr & UART_MSR_DDSR)
+               tup->uport.icount.dsr++;
+       /* We may only get DDCD when HW init and reset */
+       if (msr & UART_MSR_DDCD)
+               uart_handle_dcd_change(&tup->uport, msr & UART_MSR_DCD);
+       /* Will start/stop_tx accordingly */
+       if (msr & UART_MSR_DCTS)
+               uart_handle_cts_change(&tup->uport, msr & UART_MSR_CTS);
+       return;
+}
+
+static irqreturn_t tegra_uart_isr(int irq, void *data)
+{
+       struct tegra_uart_port *tup = data;
+       struct uart_port *u = &tup->uport;
+       unsigned long iir;
+       unsigned long ier;
+       bool is_rx_int = false;
+       unsigned long flags;
+
+       spin_lock_irqsave(&u->lock, flags);
+       while (1) {
+               iir = tegra_uart_read(tup, UART_IIR);
+               if (iir & UART_IIR_NO_INT) {
+                       if (is_rx_int) {
+                               tegra_uart_handle_rx_dma(tup);
+                               if (tup->rx_in_progress) {
+                                       ier = tup->ier_shadow;
+                                       ier |= (UART_IER_RLSI | UART_IER_RTOIE |
+                                               TEGRA_UART_IER_EORD);
+                                       tup->ier_shadow = ier;
+                                       tegra_uart_write(tup, ier, UART_IER);
+                               }
+                       }
+                       spin_unlock_irqrestore(&u->lock, flags);
+                       return IRQ_HANDLED;
+               }
+
+               switch ((iir >> 1) & 0x7) {
+               case 0: /* Modem signal change interrupt */
+                       tegra_uart_handle_modem_signal_change(u);
+                       break;
+
+               case 1: /* Transmit interrupt only triggered when using PIO */
+                       tup->ier_shadow &= ~UART_IER_THRI;
+                       tegra_uart_write(tup, tup->ier_shadow, UART_IER);
+                       tegra_uart_handle_tx_pio(tup);
+                       break;
+
+               case 4: /* End of data */
+               case 6: /* Rx timeout */
+               case 2: /* Receive */
+                       if (!is_rx_int) {
+                               is_rx_int = true;
+                               /* Disable Rx interrupts */
+                               ier = tup->ier_shadow;
+                               ier |= UART_IER_RDI;
+                               tegra_uart_write(tup, ier, UART_IER);
+                               ier &= ~(UART_IER_RDI | UART_IER_RLSI |
+                                       UART_IER_RTOIE | TEGRA_UART_IER_EORD);
+                               tup->ier_shadow = ier;
+                               tegra_uart_write(tup, ier, UART_IER);
+                       }
+                       break;
+
+               case 3: /* Receive error */
+                       tegra_uart_decode_rx_error(tup,
+                                       tegra_uart_read(tup, UART_LSR));
+                       break;
+
+               case 5: /* break nothing to handle */
+               case 7: /* break nothing to handle */
+                       break;
+               }
+       }
+}
+
+static void tegra_uart_stop_rx(struct uart_port *u)
+{
+       struct tegra_uart_port *tup = to_tegra_uport(u);
+       struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port);
+       struct dma_tx_state state;
+       unsigned long ier;
+       int count;
+
+       if (tup->rts_active)
+               set_rts(tup, false);
+
+       if (!tup->rx_in_progress)
+               return;
+
+       tegra_uart_wait_sym_time(tup, 1); /* wait a character interval */
+
+       ier = tup->ier_shadow;
+       ier &= ~(UART_IER_RDI | UART_IER_RLSI | UART_IER_RTOIE |
+                                       TEGRA_UART_IER_EORD);
+       tup->ier_shadow = ier;
+       tegra_uart_write(tup, ier, UART_IER);
+       tup->rx_in_progress = 0;
+       if (tup->rx_dma_chan) {
+               dmaengine_terminate_all(tup->rx_dma_chan);
+               dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state);
+               async_tx_ack(tup->rx_dma_desc);
+               count = tup->rx_bytes_requested - state.residue;
+               tegra_uart_copy_rx_to_tty(tup, tty, count);
+               tegra_uart_handle_rx_pio(tup, tty);
+       } else {
+               tegra_uart_handle_rx_pio(tup, tty);
+       }
+       if (tty) {
+               tty_flip_buffer_push(tty);
+               tty_kref_put(tty);
+       }
+       return;
+}
+
+static void tegra_uart_hw_deinit(struct tegra_uart_port *tup)
+{
+       unsigned long flags;
+       unsigned long char_time = DIV_ROUND_UP(10000000, tup->current_baud);
+       unsigned long fifo_empty_time = tup->uport.fifosize * char_time;
+       unsigned long wait_time;
+       unsigned long lsr;
+       unsigned long msr;
+       unsigned long mcr;
+
+       /* Disable interrupts */
+       tegra_uart_write(tup, 0, UART_IER);
+
+       lsr = tegra_uart_read(tup, UART_LSR);
+       if ((lsr & UART_LSR_TEMT) != UART_LSR_TEMT) {
+               msr = tegra_uart_read(tup, UART_MSR);
+               mcr = tegra_uart_read(tup, UART_MCR);
+               if ((mcr & TEGRA_UART_MCR_CTS_EN) && (msr & UART_MSR_CTS))
+                       dev_err(tup->uport.dev,
+                               "Tx Fifo not empty, CTS disabled, waiting\n");
+
+               /* Wait for Tx fifo to be empty */
+               while ((lsr & UART_LSR_TEMT) != UART_LSR_TEMT) {
+                       wait_time = min(fifo_empty_time, 100lu);
+                       udelay(wait_time);
+                       fifo_empty_time -= wait_time;
+                       if (!fifo_empty_time) {
+                               msr = tegra_uart_read(tup, UART_MSR);
+                               mcr = tegra_uart_read(tup, UART_MCR);
+                               if ((mcr & TEGRA_UART_MCR_CTS_EN) &&
+                                       (msr & UART_MSR_CTS))
+                                       dev_err(tup->uport.dev,
+                                               "Slave not ready\n");
+                               break;
+                       }
+                       lsr = tegra_uart_read(tup, UART_LSR);
+               }
+       }
+
+       spin_lock_irqsave(&tup->uport.lock, flags);
+       /* Reset the Rx and Tx FIFOs */
+       tegra_uart_fifo_reset(tup, UART_FCR_CLEAR_XMIT | UART_FCR_CLEAR_RCVR);
+       tup->current_baud = 0;
+       spin_unlock_irqrestore(&tup->uport.lock, flags);
+
+       clk_disable_unprepare(tup->uart_clk);
+}
+
+static int tegra_uart_hw_init(struct tegra_uart_port *tup)
+{
+       int ret;
+
+       tup->fcr_shadow = 0;
+       tup->mcr_shadow = 0;
+       tup->lcr_shadow = 0;
+       tup->ier_shadow = 0;
+       tup->current_baud = 0;
+
+       clk_prepare_enable(tup->uart_clk);
+
+       /* Reset the UART controller to clear all previous status.*/
+       tegra_periph_reset_assert(tup->uart_clk);
+       udelay(10);
+       tegra_periph_reset_deassert(tup->uart_clk);
+
+       tup->rx_in_progress = 0;
+       tup->tx_in_progress = 0;
+
+       /*
+        * Set the trigger level
+        *
+        * For PIO mode:
+        *
+        * For receive, this will interrupt the CPU after that many number of
+        * bytes are received, for the remaining bytes the receive timeout
+        * interrupt is received. Rx high watermark is set to 4.
+        *
+        * For transmit, if the trasnmit interrupt is enabled, this will
+        * interrupt the CPU when the number of entries in the FIFO reaches the
+        * low watermark. Tx low watermark is set to 16 bytes.
+        *
+        * For DMA mode:
+        *
+        * Set the Tx trigger to 16. This should match the DMA burst size that
+        * programmed in the DMA registers.
+        */
+       tup->fcr_shadow = UART_FCR_ENABLE_FIFO;
+       tup->fcr_shadow |= UART_FCR_R_TRIG_01;
+       tup->fcr_shadow |= TEGRA_UART_TX_TRIG_16B;
+       tegra_uart_write(tup, tup->fcr_shadow, UART_FCR);
+
+       /*
+        * Initialize the UART with default configuration
+        * (115200, N, 8, 1) so that the receive DMA buffer may be
+        * enqueued
+        */
+       tup->lcr_shadow = TEGRA_UART_DEFAULT_LSR;
+       tegra_set_baudrate(tup, TEGRA_UART_DEFAULT_BAUD);
+       tup->fcr_shadow |= UART_FCR_DMA_SELECT;
+       tegra_uart_write(tup, tup->fcr_shadow, UART_FCR);
+
+       ret = tegra_uart_start_rx_dma(tup);
+       if (ret < 0) {
+               dev_err(tup->uport.dev, "Not able to start Rx DMA\n");
+               return ret;
+       }
+       tup->rx_in_progress = 1;
+
+       /*
+        * Enable IE_RXS for the receive status interrupts like line errros.
+        * Enable IE_RX_TIMEOUT to get the bytes which cannot be DMA'd.
+        *
+        * If using DMA mode, enable EORD instead of receive interrupt which
+        * will interrupt after the UART is done with the receive instead of
+        * the interrupt when the FIFO "threshold" is reached.
+        *
+        * EORD is different interrupt than RX_TIMEOUT - RX_TIMEOUT occurs when
+        * the DATA is sitting in the FIFO and couldn't be transferred to the
+        * DMA as the DMA size alignment(4 bytes) is not met. EORD will be
+        * triggered when there is a pause of the incomming data stream for 4
+        * characters long.
+        *
+        * For pauses in the data which is not aligned to 4 bytes, we get
+        * both the EORD as well as RX_TIMEOUT - SW sees RX_TIMEOUT first
+        * then the EORD.
+        */
+       tup->ier_shadow = UART_IER_RLSI | UART_IER_RTOIE | TEGRA_UART_IER_EORD;
+       tegra_uart_write(tup, tup->ier_shadow, UART_IER);
+       return 0;
+}
+
+static int tegra_uart_dma_channel_allocate(struct tegra_uart_port *tup,
+                       bool dma_to_memory)
+{
+       struct dma_chan *dma_chan;
+       unsigned char *dma_buf;
+       dma_addr_t dma_phys;
+       int ret;
+       struct dma_slave_config dma_sconfig;
+       dma_cap_mask_t mask;
+
+       dma_cap_zero(mask);
+       dma_cap_set(DMA_SLAVE, mask);
+       dma_chan = dma_request_channel(mask, NULL, NULL);
+       if (!dma_chan) {
+               dev_err(tup->uport.dev,
+                       "Dma channel is not available, will try later\n");
+               return -EPROBE_DEFER;
+       }
+
+       if (dma_to_memory) {
+               dma_buf = dma_alloc_coherent(tup->uport.dev,
+                               TEGRA_UART_RX_DMA_BUFFER_SIZE,
+                                &dma_phys, GFP_KERNEL);
+               if (!dma_buf) {
+                       dev_err(tup->uport.dev,
+                               "Not able to allocate the dma buffer\n");
+                       dma_release_channel(dma_chan);
+                       return -ENOMEM;
+               }
+       } else {
+               dma_phys = dma_map_single(tup->uport.dev,
+                       tup->uport.state->xmit.buf, UART_XMIT_SIZE,
+                       DMA_TO_DEVICE);
+               dma_buf = tup->uport.state->xmit.buf;
+       }
+
+       dma_sconfig.slave_id = tup->dma_req_sel;
+       if (dma_to_memory) {
+               dma_sconfig.src_addr = tup->uport.mapbase;
+               dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+               dma_sconfig.src_maxburst = 4;
+       } else {
+               dma_sconfig.dst_addr = tup->uport.mapbase;
+               dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
+               dma_sconfig.dst_maxburst = 16;
+       }
+
+       ret = dmaengine_slave_config(dma_chan, &dma_sconfig);
+       if (ret < 0) {
+               dev_err(tup->uport.dev,
+                       "Dma slave config failed, err = %d\n", ret);
+               goto scrub;
+       }
+
+       if (dma_to_memory) {
+               tup->rx_dma_chan = dma_chan;
+               tup->rx_dma_buf_virt = dma_buf;
+               tup->rx_dma_buf_phys = dma_phys;
+       } else {
+               tup->tx_dma_chan = dma_chan;
+               tup->tx_dma_buf_virt = dma_buf;
+               tup->tx_dma_buf_phys = dma_phys;
+       }
+       return 0;
+
+scrub:
+       dma_release_channel(dma_chan);
+       return ret;
+}
+
+static void tegra_uart_dma_channel_free(struct tegra_uart_port *tup,
+               bool dma_to_memory)
+{
+       struct dma_chan *dma_chan;
+
+       if (dma_to_memory) {
+               dma_free_coherent(tup->uport.dev, TEGRA_UART_RX_DMA_BUFFER_SIZE,
+                               tup->rx_dma_buf_virt, tup->rx_dma_buf_phys);
+               dma_chan = tup->rx_dma_chan;
+               tup->rx_dma_chan = NULL;
+               tup->rx_dma_buf_phys = 0;
+               tup->rx_dma_buf_virt = NULL;
+       } else {
+               dma_unmap_single(tup->uport.dev, tup->tx_dma_buf_phys,
+                       UART_XMIT_SIZE, DMA_TO_DEVICE);
+               dma_chan = tup->tx_dma_chan;
+               tup->tx_dma_chan = NULL;
+               tup->tx_dma_buf_phys = 0;
+               tup->tx_dma_buf_virt = NULL;
+       }
+       dma_release_channel(dma_chan);
+}
+
+static int tegra_uart_startup(struct uart_port *u)
+{
+       struct tegra_uart_port *tup = to_tegra_uport(u);
+       int ret;
+
+       ret = tegra_uart_dma_channel_allocate(tup, false);
+       if (ret < 0) {
+               dev_err(u->dev, "Tx Dma allocation failed, err = %d\n", ret);
+               return ret;
+       }
+
+       ret = tegra_uart_dma_channel_allocate(tup, true);
+       if (ret < 0) {
+               dev_err(u->dev, "Rx Dma allocation failed, err = %d\n", ret);
+               goto fail_rx_dma;
+       }
+
+       ret = tegra_uart_hw_init(tup);
+       if (ret < 0) {
+               dev_err(u->dev, "Uart HW init failed, err = %d\n", ret);
+               goto fail_hw_init;
+       }
+
+       ret = request_irq(u->irq, tegra_uart_isr, IRQF_DISABLED,
+                               dev_name(u->dev), tup);
+       if (ret < 0) {
+               dev_err(u->dev, "Failed to register ISR for IRQ %d\n", u->irq);
+               goto fail_hw_init;
+       }
+       return 0;
+
+fail_hw_init:
+       tegra_uart_dma_channel_free(tup, true);
+fail_rx_dma:
+       tegra_uart_dma_channel_free(tup, false);
+       return ret;
+}
+
+static void tegra_uart_shutdown(struct uart_port *u)
+{
+       struct tegra_uart_port *tup = to_tegra_uport(u);
+
+       tegra_uart_hw_deinit(tup);
+
+       tup->rx_in_progress = 0;
+       tup->tx_in_progress = 0;
+
+       tegra_uart_dma_channel_free(tup, true);
+       tegra_uart_dma_channel_free(tup, false);
+       free_irq(u->irq, tup);
+}
+
+static void tegra_uart_enable_ms(struct uart_port *u)
+{
+       struct tegra_uart_port *tup = to_tegra_uport(u);
+
+       if (tup->enable_modem_interrupt) {
+               tup->ier_shadow |= UART_IER_MSI;
+               tegra_uart_write(tup, tup->ier_shadow, UART_IER);
+       }
+}
+
+static void tegra_uart_set_termios(struct uart_port *u,
+               struct ktermios *termios, struct ktermios *oldtermios)
+{
+       struct tegra_uart_port *tup = to_tegra_uport(u);
+       unsigned int baud;
+       unsigned long flags;
+       unsigned int lcr;
+       int symb_bit = 1;
+       struct clk *parent_clk = clk_get_parent(tup->uart_clk);
+       unsigned long parent_clk_rate = clk_get_rate(parent_clk);
+       int max_divider = (tup->cdata->support_clk_src_div) ? 0x7FFF : 0xFFFF;
+
+       max_divider *= 16;
+       spin_lock_irqsave(&u->lock, flags);
+
+       /* Changing configuration, it is safe to stop any rx now */
+       if (tup->rts_active)
+               set_rts(tup, false);
+
+       /* Clear all interrupts as configuration is going to be change */
+       tegra_uart_write(tup, tup->ier_shadow | UART_IER_RDI, UART_IER);
+       tegra_uart_read(tup, UART_IER);
+       tegra_uart_write(tup, 0, UART_IER);
+       tegra_uart_read(tup, UART_IER);
+
+       /* Parity */
+       lcr = tup->lcr_shadow;
+       lcr &= ~UART_LCR_PARITY;
+
+       /* CMSPAR isn't supported by this driver */
+       termios->c_cflag &= ~CMSPAR;
+
+       if ((termios->c_cflag & PARENB) == PARENB) {
+               symb_bit++;
+               if (termios->c_cflag & PARODD) {
+                       lcr |= UART_LCR_PARITY;
+                       lcr &= ~UART_LCR_EPAR;
+                       lcr &= ~UART_LCR_SPAR;
+               } else {
+                       lcr |= UART_LCR_PARITY;
+                       lcr |= UART_LCR_EPAR;
+                       lcr &= ~UART_LCR_SPAR;
+               }
+       }
+
+       lcr &= ~UART_LCR_WLEN8;
+       switch (termios->c_cflag & CSIZE) {
+       case CS5:
+               lcr |= UART_LCR_WLEN5;
+               symb_bit += 5;
+               break;
+       case CS6:
+               lcr |= UART_LCR_WLEN6;
+               symb_bit += 6;
+               break;
+       case CS7:
+               lcr |= UART_LCR_WLEN7;
+               symb_bit += 7;
+               break;
+       default:
+               lcr |= UART_LCR_WLEN8;
+               symb_bit += 8;
+               break;
+       }
+
+       /* Stop bits */
+       if (termios->c_cflag & CSTOPB) {
+               lcr |= UART_LCR_STOP;
+               symb_bit += 2;
+       } else {
+               lcr &= ~UART_LCR_STOP;
+               symb_bit++;
+       }
+
+       tegra_uart_write(tup, lcr, UART_LCR);
+       tup->lcr_shadow = lcr;
+       tup->symb_bit = symb_bit;
+
+       /* Baud rate. */
+       baud = uart_get_baud_rate(u, termios, oldtermios,
+                       parent_clk_rate/max_divider,
+                       parent_clk_rate/16);
+       spin_unlock_irqrestore(&u->lock, flags);
+       tegra_set_baudrate(tup, baud);
+       if (tty_termios_baud_rate(termios))
+               tty_termios_encode_baud_rate(termios, baud, baud);
+       spin_lock_irqsave(&u->lock, flags);
+
+       /* Flow control */
+       if (termios->c_cflag & CRTSCTS) {
+               tup->mcr_shadow |= TEGRA_UART_MCR_CTS_EN;
+               tup->mcr_shadow &= ~TEGRA_UART_MCR_RTS_EN;
+               tegra_uart_write(tup, tup->mcr_shadow, UART_MCR);
+               /* if top layer has asked to set rts active then do so here */
+               if (tup->rts_active)
+                       set_rts(tup, true);
+       } else {
+               tup->mcr_shadow &= ~TEGRA_UART_MCR_CTS_EN;
+               tup->mcr_shadow &= ~TEGRA_UART_MCR_RTS_EN;
+               tegra_uart_write(tup, tup->mcr_shadow, UART_MCR);
+       }
+
+       /* update the port timeout based on new settings */
+       uart_update_timeout(u, termios->c_cflag, baud);
+
+       /* Make sure all write has completed */
+       tegra_uart_read(tup, UART_IER);
+
+       /* Reenable interrupt */
+       tegra_uart_write(tup, tup->ier_shadow, UART_IER);
+       tegra_uart_read(tup, UART_IER);
+
+       spin_unlock_irqrestore(&u->lock, flags);
+       return;
+}
+
+/*
+ * Flush any TX data submitted for DMA and PIO. Called when the
+ * TX circular buffer is reset.
+ */
+static void tegra_uart_flush_buffer(struct uart_port *u)
+{
+       struct tegra_uart_port *tup = to_tegra_uport(u);
+
+       tup->tx_bytes = 0;
+       if (tup->tx_dma_chan)
+               dmaengine_terminate_all(tup->tx_dma_chan);
+       return;
+}
+
+static const char *tegra_uart_type(struct uart_port *u)
+{
+       return TEGRA_UART_TYPE;
+}
+
+static struct uart_ops tegra_uart_ops = {
+       .tx_empty       = tegra_uart_tx_empty,
+       .set_mctrl      = tegra_uart_set_mctrl,
+       .get_mctrl      = tegra_uart_get_mctrl,
+       .stop_tx        = tegra_uart_stop_tx,
+       .start_tx       = tegra_uart_start_tx,
+       .stop_rx        = tegra_uart_stop_rx,
+       .flush_buffer   = tegra_uart_flush_buffer,
+       .enable_ms      = tegra_uart_enable_ms,
+       .break_ctl      = tegra_uart_break_ctl,
+       .startup        = tegra_uart_startup,
+       .shutdown       = tegra_uart_shutdown,
+       .set_termios    = tegra_uart_set_termios,
+       .type           = tegra_uart_type,
+       .request_port   = tegra_uart_request_port,
+       .release_port   = tegra_uart_release_port,
+};
+
+static struct uart_driver tegra_uart_driver = {
+       .owner          = THIS_MODULE,
+       .driver_name    = "tegra_hsuart",
+       .dev_name       = "ttyTHS",
+       .cons           = 0,
+       .nr             = TEGRA_UART_MAXIMUM,
+};
+
+static int tegra_uart_parse_dt(struct platform_device *pdev,
+       struct tegra_uart_port *tup)
+{
+       struct device_node *np = pdev->dev.of_node;
+       u32 of_dma[2];
+       int port;
+
+       if (of_property_read_u32_array(np, "nvidia,dma-request-selector",
+                               of_dma, 2) >= 0) {
+               tup->dma_req_sel = of_dma[1];
+       } else {
+               dev_err(&pdev->dev, "missing dma requestor in device tree\n");
+               return -EINVAL;
+       }
+
+       port = of_alias_get_id(np, "serial");
+       if (port < 0) {
+               dev_err(&pdev->dev, "failed to get alias id, errno %d\n", port);
+               return port;
+       }
+       tup->uport.line = port;
+
+       tup->enable_modem_interrupt = of_property_read_bool(np,
+                                       "nvidia,enable-modem-interrupt");
+       return 0;
+}
+
+struct tegra_uart_chip_data tegra20_uart_chip_data = {
+       .tx_fifo_full_status            = false,
+       .allow_txfifo_reset_fifo_mode   = true,
+       .support_clk_src_div            = false,
+};
+
+struct tegra_uart_chip_data tegra30_uart_chip_data = {
+       .tx_fifo_full_status            = true,
+       .allow_txfifo_reset_fifo_mode   = false,
+       .support_clk_src_div            = true,
+};
+
+static struct of_device_id tegra_uart_of_match[] = {
+       {
+               .compatible     = "nvidia,tegra30-hsuart",
+               .data           = &tegra30_uart_chip_data,
+       }, {
+               .compatible     = "nvidia,tegra20-hsuart",
+               .data           = &tegra20_uart_chip_data,
+       }, {
+       },
+};
+MODULE_DEVICE_TABLE(of, tegra_uart_of_match);
+
+static int tegra_uart_probe(struct platform_device *pdev)
+{
+       struct tegra_uart_port *tup;
+       struct uart_port *u;
+       struct resource *resource;
+       int ret;
+       const struct tegra_uart_chip_data *cdata;
+       const struct of_device_id *match;
+
+       match = of_match_device(of_match_ptr(tegra_uart_of_match),
+                               &pdev->dev);
+       if (!match) {
+               dev_err(&pdev->dev, "Error: No device match found\n");
+               return -ENODEV;
+       }
+       cdata = match->data;
+
+       tup = devm_kzalloc(&pdev->dev, sizeof(*tup), GFP_KERNEL);
+       if (!tup) {
+               dev_err(&pdev->dev, "Failed to allocate memory for tup\n");
+               return -ENOMEM;
+       }
+
+       ret = tegra_uart_parse_dt(pdev, tup);
+       if (ret < 0)
+               return ret;
+
+       u = &tup->uport;
+       u->dev = &pdev->dev;
+       u->ops = &tegra_uart_ops;
+       u->type = PORT_TEGRA;
+       u->fifosize = 32;
+       tup->cdata = cdata;
+
+       platform_set_drvdata(pdev, tup);
+       resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (!resource) {
+               dev_err(&pdev->dev, "No IO memory resource\n");
+               return -ENODEV;
+       }
+
+       u->mapbase = resource->start;
+       u->membase = devm_request_and_ioremap(&pdev->dev, resource);
+       if (!u->membase) {
+               dev_err(&pdev->dev, "memregion/iomap address req failed\n");
+               return -EADDRNOTAVAIL;
+       }
+
+       tup->uart_clk = devm_clk_get(&pdev->dev, NULL);
+       if (IS_ERR(tup->uart_clk)) {
+               dev_err(&pdev->dev, "Couldn't get the clock\n");
+               return PTR_ERR(tup->uart_clk);
+       }
+
+       u->iotype = UPIO_MEM32;
+       u->irq = platform_get_irq(pdev, 0);
+       u->regshift = 2;
+       ret = uart_add_one_port(&tegra_uart_driver, u);
+       if (ret < 0) {
+               dev_err(&pdev->dev, "Failed to add uart port, err %d\n", ret);
+               return ret;
+       }
+       return ret;
+}
+
+static int tegra_uart_remove(struct platform_device *pdev)
+{
+       struct tegra_uart_port *tup = platform_get_drvdata(pdev);
+       struct uart_port *u = &tup->uport;
+
+       uart_remove_one_port(&tegra_uart_driver, u);
+       return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int tegra_uart_suspend(struct device *dev)
+{
+       struct tegra_uart_port *tup = dev_get_drvdata(dev);
+       struct uart_port *u = &tup->uport;
+
+       return uart_suspend_port(&tegra_uart_driver, u);
+}
+
+static int tegra_uart_resume(struct device *dev)
+{
+       struct tegra_uart_port *tup = dev_get_drvdata(dev);
+       struct uart_port *u = &tup->uport;
+
+       return uart_resume_port(&tegra_uart_driver, u);
+}
+#endif
+
+static const struct dev_pm_ops tegra_uart_pm_ops = {
+       SET_SYSTEM_SLEEP_PM_OPS(tegra_uart_suspend, tegra_uart_resume)
+};
+
+static struct platform_driver tegra_uart_platform_driver = {
+       .probe          = tegra_uart_probe,
+       .remove         = tegra_uart_remove,
+       .driver         = {
+               .name   = "serial-tegra",
+               .of_match_table = of_match_ptr(tegra_uart_of_match),
+               .pm     = &tegra_uart_pm_ops,
+       },
+};
+
+static int __init tegra_uart_init(void)
+{
+       int ret;
+
+       ret = uart_register_driver(&tegra_uart_driver);
+       if (ret < 0) {
+               pr_err("Could not register %s driver\n",
+                       tegra_uart_driver.driver_name);
+               return ret;
+       }
+
+       ret = platform_driver_register(&tegra_uart_platform_driver);
+       if (ret < 0) {
+               pr_err("Uart platfrom driver register failed, e = %d\n", ret);
+               uart_unregister_driver(&tegra_uart_driver);
+               return ret;
+       }
+       return 0;
+}
+
+static void __exit tegra_uart_exit(void)
+{
+       pr_info("Unloading tegra uart driver\n");
+       platform_driver_unregister(&tegra_uart_platform_driver);
+       uart_unregister_driver(&tegra_uart_driver);
+}
+
+module_init(tegra_uart_init);
+module_exit(tegra_uart_exit);
+
+MODULE_ALIAS("platform:serial-tegra");
+MODULE_DESCRIPTION("High speed UART driver for tegra chipset");
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
+MODULE_LICENSE("GPL v2");