USB: emi62.c: remove err() usage

err() was a very old USB-specific macro that I thought had
gone away.  This patch removes it from being used in the
driver and uses dev_err() instead.

CC: Paul Gortmaker <paul.gortmaker@windriver.com>
CC: Andrew Morton <akpm@linux-foundation.org>
CC: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c
index 4e0f167..ff08015 100644 (file)
--- a/drivers/usb/misc/emi62.c
+++ b/drivers/usb/misc/emi62.c
@@ -56,7 +56,7 @@ static int emi62_writememory(struct usb_device *dev, int address,
        unsigned char *buffer =  kmemdup(data, length, GFP_KERNEL);
 
        if (!buffer) {
-               err("emi62: kmalloc(%d) failed.", length);
+               dev_err(&dev->dev, "kmalloc(%d) failed.\n", length);
                return -ENOMEM;
        }
        /* Note: usb_control_msg returns negative value on error or length of the
@@ -73,9 +73,8 @@ static int emi62_set_reset (struct usb_device *dev, unsigned char reset_bit)
        dev_info(&dev->dev, "%s - %d\n", __func__, reset_bit);
        
        response = emi62_writememory (dev, CPUCS_REG, &reset_bit, 1, 0xa0);
-       if (response < 0) {
-               err("emi62: set_reset (%d) failed", reset_bit);
-       }
+       if (response < 0)
+               dev_err(&dev->dev, "set_reset (%d) failed\n", reset_bit);
        return response;
 }
 
@@ -87,18 +86,15 @@ static int emi62_load_firmware (struct usb_device *dev)
        const struct firmware *bitstream_fw = NULL;
        const struct firmware *firmware_fw = NULL;
        const struct ihex_binrec *rec;
-       int err;
+       int err = -ENOMEM;
        int i;
        __u32 addr;     /* Address to write */
        __u8 *buf;
 
        dev_dbg(&dev->dev, "load_firmware\n");
        buf = kmalloc(FW_LOAD_SIZE, GFP_KERNEL);
-       if (!buf) {
-               err( "%s - error loading firmware: error = %d", __func__, -ENOMEM);
-               err = -ENOMEM;
+       if (!buf)
                goto wraperr;
-       }
 
        err = request_ihex_firmware(&loader_fw, "emi62/loader.fw", &dev->dev);
        if (err)
@@ -112,16 +108,13 @@ static int emi62_load_firmware (struct usb_device *dev)
        err = request_ihex_firmware(&firmware_fw, FIRMWARE_FW, &dev->dev);
        if (err) {
        nofw:
-               err( "%s - request_firmware() failed", __func__);
                goto wraperr;
        }
 
        /* Assert reset (stop the CPU in the EMI) */
        err = emi62_set_reset(dev,1);
-       if (err < 0) {
-               err("%s - error loading firmware: error = %d", __func__, err);
+       if (err < 0)
                goto wraperr;
-       }
 
        rec = (const struct ihex_binrec *)loader_fw->data;
 
@@ -130,19 +123,15 @@ static int emi62_load_firmware (struct usb_device *dev)
                err = emi62_writememory(dev, be32_to_cpu(rec->addr),
                                        rec->data, be16_to_cpu(rec->len),
                                        ANCHOR_LOAD_INTERNAL);
-               if (err < 0) {
-                       err("%s - error loading firmware: error = %d", __func__, err);
+               if (err < 0)
                        goto wraperr;
-               }
                rec = ihex_next_binrec(rec);
        }
 
        /* De-assert reset (let the CPU run) */
        err = emi62_set_reset(dev,0);
-       if (err < 0) {
-               err("%s - error loading firmware: error = %d", __func__, err);
+       if (err < 0)
                goto wraperr;
-       }
        msleep(250);    /* let device settle */
 
        /* 2. We upload the FPGA firmware into the EMI
@@ -160,18 +149,14 @@ static int emi62_load_firmware (struct usb_device *dev)
                        rec = ihex_next_binrec(rec);
                }
                err = emi62_writememory(dev, addr, buf, i, ANCHOR_LOAD_FPGA);
-               if (err < 0) {
-                       err("%s - error loading firmware: error = %d", __func__, err);
+               if (err < 0)
                        goto wraperr;
-               }
        } while (rec);
 
        /* Assert reset (stop the CPU in the EMI) */
        err = emi62_set_reset(dev,1);
-       if (err < 0) {
-               err("%s - error loading firmware: error = %d", __func__, err);
+       if (err < 0)
                goto wraperr;
-       }
 
        /* 3. We need to put the loader for the firmware into the EZ-USB (again...) */
        for (rec = (const struct ihex_binrec *)loader_fw->data;
@@ -179,18 +164,14 @@ static int emi62_load_firmware (struct usb_device *dev)
                err = emi62_writememory(dev, be32_to_cpu(rec->addr),
                                        rec->data, be16_to_cpu(rec->len),
                                        ANCHOR_LOAD_INTERNAL);
-               if (err < 0) {
-                       err("%s - error loading firmware: error = %d", __func__, err);
+               if (err < 0)
                        goto wraperr;
-               }
        }
 
        /* De-assert reset (let the CPU run) */
        err = emi62_set_reset(dev,0);
-       if (err < 0) {
-               err("%s - error loading firmware: error = %d", __func__, err);
+       if (err < 0)
                goto wraperr;
-       }
        msleep(250);    /* let device settle */
 
        /* 4. We put the part of the firmware that lies in the external RAM into the EZ-USB */
@@ -201,19 +182,15 @@ static int emi62_load_firmware (struct usb_device *dev)
                        err = emi62_writememory(dev, be32_to_cpu(rec->addr),
                                                rec->data, be16_to_cpu(rec->len),
                                                ANCHOR_LOAD_EXTERNAL);
-                       if (err < 0) {
-                               err("%s - error loading firmware: error = %d", __func__, err);
+                       if (err < 0)
                                goto wraperr;
-                       }
                }
        }
 
        /* Assert reset (stop the CPU in the EMI) */
        err = emi62_set_reset(dev,1);
-       if (err < 0) {
-               err("%s - error loading firmware: error = %d", __func__, err);
+       if (err < 0)
                goto wraperr;
-       }
 
        for (rec = (const struct ihex_binrec *)firmware_fw->data;
             rec; rec = ihex_next_binrec(rec)) {
@@ -221,19 +198,15 @@ static int emi62_load_firmware (struct usb_device *dev)
                        err = emi62_writememory(dev, be32_to_cpu(rec->addr),
                                                rec->data, be16_to_cpu(rec->len),
                                                ANCHOR_LOAD_EXTERNAL);
-                       if (err < 0) {
-                               err("%s - error loading firmware: error = %d", __func__, err);
+                       if (err < 0)
                                goto wraperr;
-                       }
                }
        }
 
        /* De-assert reset (let the CPU run) */
        err = emi62_set_reset(dev,0);
-       if (err < 0) {
-               err("%s - error loading firmware: error = %d", __func__, err);
+       if (err < 0)
                goto wraperr;
-       }
        msleep(250);    /* let device settle */
 
        release_firmware(loader_fw);
@@ -247,6 +220,9 @@ static int emi62_load_firmware (struct usb_device *dev)
        return 1;
 
 wraperr:
+       if (err < 0)
+               dev_err(&dev->dev,"%s - error loading firmware: error = %d\n",
+                       __func__, err);
        release_firmware(loader_fw);
        release_firmware(bitstream_fw);
        release_firmware(firmware_fw);