ARM: OMAP: Remove unused platform devices, v3
authorTony Lindgren <tony@atomide.com>
Thu, 15 Jan 2009 11:55:59 +0000 (13:55 +0200)
committerTony Lindgren <tony@atomide.com>
Thu, 15 Jan 2009 12:07:48 +0000 (14:07 +0200)
This patch removes old platform devices. Alsa should now
be using the ASoC driver. For boards not yet using ASoC,
please see sound/soc/omap/osk5912.c.

Add dummy aic23_power_up and aic23_power_down functions for 770
to keep things compiling.

Remove references to omap_gpio_switch, and unused h2_nand_dev_ready
function.

This patch is based on an earlier patch by Arun KS.

Cc: Jarkko Nikula <jarkko.nikula@nokia.com>
Signed-off-by: Arun KS <arunks@mistralsolutions.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
arch/arm/mach-omap1/board-h2.c
arch/arm/mach-omap1/board-h3.c
arch/arm/mach-omap1/board-innovator.c
arch/arm/mach-omap1/board-nokia770.c
arch/arm/mach-omap1/board-osk.c
arch/arm/mach-omap1/board-palmte.c
arch/arm/mach-omap1/board-palmtt.c
arch/arm/mach-omap1/board-palmz71.c
arch/arm/mach-omap1/board-sx1.c
arch/arm/plat-omap/include/mach/aic23.h [deleted file]

index b240c5f..0d784a7 100644 (file)
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/gpio-switch.h>
 #include <mach/mux.h>
+#include <mach/dma.h>
 #include <mach/tc.h>
 #include <mach/nand.h>
 #include <mach/irda.h>
 #include <mach/usb.h>
 #include <mach/keypad.h>
 #include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
 
 static int h2_keymap[] = {
        KEY(0, 0, KEY_LEFT),
@@ -292,41 +290,6 @@ static struct platform_device h2_lcd_device = {
        .id             = -1,
 };
 
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
-       .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
-       .spcr1 = RINTM(3) | RRST,
-       .rcr2  = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
-                RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1),
-       .rcr1  = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
-       .xcr2  = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
-                XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG,
-       .xcr1  = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
-       .srgr1 = FWID(15),
-       .srgr2 = GSYNC | CLKSP | FSGM | FPER(31),
-
-       .pcr0  = CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP,
-       /*.pcr0 = CLKXP | CLKRP,*/        /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
-       .name                   = "H2 TSC2101",
-       .mcbsp_regs_alsa        = &mcbsp_regs,
-       .codec_configure_dev    = NULL, /* tsc2101_configure, */
-       .codec_set_samplerate   = NULL, /* tsc2101_set_samplerate, */
-       .codec_clock_setup      = NULL, /* tsc2101_clock_setup, */
-       .codec_clock_on         = NULL, /* tsc2101_clock_on, */
-       .codec_clock_off        = NULL, /* tsc2101_clock_off, */
-       .get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */
-};
-
-static struct platform_device h2_mcbsp1_device = {
-       .name   = "omap_alsa_mcbsp",
-       .id     = 1,
-       .dev = {
-               .platform_data  = &alsa_config,
-       },
-};
-
 static struct platform_device *h2_devices[] __initdata = {
        &h2_nor_device,
        &h2_nand_device,
@@ -334,7 +297,6 @@ static struct platform_device *h2_devices[] __initdata = {
        &h2_irda_device,
        &h2_kp_device,
        &h2_lcd_device,
-       &h2_mcbsp1_device,
 };
 
 static void __init h2_init_smc91x(void)
@@ -409,11 +371,6 @@ static struct omap_board_config_kernel h2_config[] __initdata = {
 
 #define H2_NAND_RB_GPIO_PIN    62
 
-static int h2_nand_dev_ready(struct omap_nand_platform_data *data)
-{
-       return gpio_get_value(H2_NAND_RB_GPIO_PIN);
-}
-
 static void __init h2_init(void)
 {
        /* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
index 5157eea..bf08b6a 100644 (file)
@@ -49,8 +49,6 @@
 #include <mach/keypad.h>
 #include <mach/dma.h>
 #include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
 
 #define H3_TS_GPIO     48
 
@@ -387,41 +385,6 @@ static struct spi_board_info h3_spi_board_info[] __initdata = {
        },
 };
 
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
-       .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
-       .spcr1 = RINTM(3) | RRST,
-       .rcr2  = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
-                RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1),
-       .rcr1  = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
-       .xcr2  = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
-                XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG,
-       .xcr1  = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
-       .srgr1 = FWID(15),
-       .srgr2 = GSYNC | CLKSP | FSGM | FPER(31),
-
-       .pcr0  = CLKRM | SCLKME | FSXP | FSRP | CLKXP | CLKRP,
-       /*.pcr0 = CLKXP | CLKRP,*/        /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
-       .name                   = "H3 TSC2101",
-       .mcbsp_regs_alsa        = &mcbsp_regs,
-       .codec_configure_dev    = NULL, /* tsc2101_configure, */
-       .codec_set_samplerate   = NULL, /* tsc2101_set_samplerate, */
-       .codec_clock_setup      = NULL, /* tsc2101_clock_setup, */
-       .codec_clock_on         = NULL, /* tsc2101_clock_on, */
-       .codec_clock_off        = NULL, /* tsc2101_clock_off, */
-       .get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */
-};
-
-static struct platform_device h3_mcbsp1_device = {
-       .name   = "omap_alsa_mcbsp",
-       .id     = 1,
-       .dev = {
-               .platform_data  = &alsa_config,
-       },
-};
-
 static struct platform_device *devices[] __initdata = {
        &nor_device,
        &nand_device,
@@ -430,7 +393,6 @@ static struct platform_device *devices[] __initdata = {
        &h3_irda_device,
        &h3_kp_device,
        &h3_lcd_device,
-       &h3_mcbsp1_device,
 };
 
 static struct omap_usb_config h3_usb_config __initdata = {
@@ -472,18 +434,6 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = {
        },
 };
 
-static struct omap_gpio_switch h3_gpio_switches[] __initdata = {
-       {
-               .name                   = "mmc_slot",
-               .gpio                   = OMAP_MPUIO(1),
-               .type                   = OMAP_GPIO_SWITCH_TYPE_COVER,
-               .debounce_rising        = 100,
-               .debounce_falling       = 0,
-               .notify                 = h3_mmc_slot_cover_handler,
-               .notify_data            = NULL,
-       },
-};
-
 #define H3_NAND_RB_GPIO_PIN    10
 
 static int nand_dev_ready(struct omap_nand_platform_data *data)
index af2fb90..071cd02 100644 (file)
@@ -37,8 +37,6 @@
 #include <mach/usb.h>
 #include <mach/keypad.h>
 #include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
 #include <mach/mmc.h>
 
 static int innovator_keymap[] = {
@@ -115,42 +113,6 @@ static struct platform_device innovator_flash_device = {
        .resource       = &innovator_flash_resource,
 };
 
-#define DEFAULT_BITPERSAMPLE 16
-
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
-       .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
-       .spcr1 = RINTM(3) | RRST,
-       .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
-           RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
-       .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
-       .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
-           XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
-       .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
-       .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
-       .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
-       /*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */
-       .pcr0 = CLKXP | CLKRP,  /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
-       .name                   = "OMAP Innovator AIC23",
-       .mcbsp_regs_alsa        = &mcbsp_regs,
-       .codec_configure_dev    = NULL, /* aic23_configure, */
-       .codec_set_samplerate   = NULL, /* aic23_set_samplerate, */
-       .codec_clock_setup      = NULL, /* aic23_clock_setup, */
-       .codec_clock_on         = NULL, /* aic23_clock_on, */
-       .codec_clock_off        = NULL, /* aic23_clock_off, */
-       .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */
-};
-
-static struct platform_device innovator_mcbsp1_device = {
-       .name   = "omap_alsa_mcbsp",
-       .id     = 1,
-       .dev = {
-               .platform_data  = &alsa_config,
-       },
-};
-
 static struct resource innovator_kp_resources[] = {
        [0] = {
                .start  = INT_KEYBOARD,
@@ -227,7 +189,6 @@ static struct platform_device innovator1510_spi_device = {
 static struct platform_device *innovator1510_devices[] __initdata = {
        &innovator_flash_device,
        &innovator1510_smc91x_device,
-       &innovator_mcbsp1_device,
        &innovator_kp_device,
        &innovator1510_lcd_device,
        &innovator1510_spi_device,
index 4970c40..af51e0b 100644 (file)
@@ -32,7 +32,6 @@
 #include <mach/keypad.h>
 #include <mach/common.h>
 #include <mach/dsp_common.h>
-#include <mach/aic23.h>
 #include <mach/omapfb.h>
 #include <mach/lcd_mipid.h>
 #include <mach/mmc.h>
@@ -261,6 +260,13 @@ static DEFINE_MUTEX(audio_pwr_lock);
  */
 static int audio_pwr_state = -1;
 
+static inline void aic23_power_up(void)
+{
+}
+static inline void aic23_power_down(void)
+{
+}
+
 /*
  * audio_pwr_up / down should be called under audio_pwr_lock
  */
index d17952f..1a16ecb 100644 (file)
@@ -51,8 +51,6 @@
 #include <mach/mux.h>
 #include <mach/tc.h>
 #include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
 
 static struct mtd_partition osk_partitions[] = {
        /* bootloader (U-Boot, etc) in first sector */
@@ -141,47 +139,10 @@ static struct platform_device osk5912_cf_device = {
        .resource       = osk5912_cf_resources,
 };
 
-#define DEFAULT_BITPERSAMPLE 16
-
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
-       .spcr2 = FREE | FRST | GRST | XRST | XINTM(3),
-       .spcr1 = RINTM(3) | RRST,
-       .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
-           RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
-       .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
-       .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
-           XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
-       .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
-       .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1),
-       .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
-       /*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */
-       .pcr0 = CLKXP | CLKRP,  /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
-       .name                   = "OSK AIC23",
-       .mcbsp_regs_alsa        = &mcbsp_regs,
-       .codec_configure_dev    = NULL, /* aic23_configure, */
-       .codec_set_samplerate   = NULL, /* aic23_set_samplerate, */
-       .codec_clock_setup      = NULL, /* aic23_clock_setup, */
-       .codec_clock_on         = NULL, /* aic23_clock_on, */
-       .codec_clock_off        = NULL, /* aic23_clock_off, */
-       .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */
-};
-
-static struct platform_device osk5912_mcbsp1_device = {
-       .name   = "omap_alsa_mcbsp",
-       .id     = 1,
-       .dev = {
-               .platform_data  = &alsa_config,
-       },
-};
-
 static struct platform_device *osk5912_devices[] __initdata = {
        &osk5912_flash_device,
        &osk5912_smc91x_device,
        &osk5912_cf_device,
-       &osk5912_mcbsp1_device,
 };
 
 static struct gpio_led tps_leds[] = {
index 00322f4..99f2b43 100644 (file)
@@ -42,8 +42,6 @@
 #include <mach/irda.h>
 #include <mach/keypad.h>
 #include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
 
 static void __init omap_palmte_init_irq(void)
 {
@@ -203,24 +201,6 @@ static struct omap_uart_config palmte_uart_config __initdata = {
        .enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2),
 };
 
-static struct omap_mcbsp_reg_cfg palmte_mcbsp1_regs = {
-       .spcr2  = FRST | GRST | XRST | XINTM(3),
-       .xcr2   = XDATDLY(1) | XFIG,
-       .xcr1   = XWDLEN1(OMAP_MCBSP_WORD_32),
-       .pcr0   = SCLKME | FSXP | CLKXP,
-};
-
-static struct omap_alsa_codec_config palmte_alsa_config = {
-       .name                   = "TSC2102 audio",
-       .mcbsp_regs_alsa        = &palmte_mcbsp1_regs,
-       .codec_configure_dev    = NULL, /* tsc2102_configure, */
-       .codec_set_samplerate   = NULL, /* tsc2102_set_samplerate, */
-       .codec_clock_setup      = NULL, /* tsc2102_clock_setup, */
-       .codec_clock_on         = NULL, /* tsc2102_clock_on, */
-       .codec_clock_off        = NULL, /* tsc2102_clock_off, */
-       .get_default_samplerate = NULL, /* tsc2102_get_default_samplerate, */
-};
-
 #ifdef CONFIG_APM
 /*
  * Values measured in 10 minute intervals averaged over 10 samples.
index 5c001af..1cbc127 100644 (file)
@@ -30,7 +30,6 @@
 #include <asm/mach/flash.h>
 
 #include <mach/led.h>
-#include <mach/mcbsp.h>
 #include <mach/gpio.h>
 #include <mach/mux.h>
 #include <mach/usb.h>
@@ -40,7 +39,6 @@
 #include <mach/irda.h>
 #include <mach/keypad.h>
 #include <mach/common.h>
-#include <mach/omap-alsa.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
@@ -122,44 +120,6 @@ static struct platform_device palmtt_flash_device = {
        .resource       = &palmtt_flash_resource,
 };
 
-#define DEFAULT_BITPERSAMPLE 16
-
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
-       .spcr2          = FREE | FRST | GRST | XRST | XINTM(3),
-       .spcr1          = RINTM(3) | RRST,
-       .rcr2           = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
-                               RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
-       .rcr1           = RFRLEN1(OMAP_MCBSP_WORD_8) |
-                               RWDLEN1(OMAP_MCBSP_WORD_16),
-       .xcr2           = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
-                               XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
-       .xcr1           = XFRLEN1(OMAP_MCBSP_WORD_8) |
-                               XWDLEN1(OMAP_MCBSP_WORD_16),
-       .srgr1          = FWID(DEFAULT_BITPERSAMPLE - 1),
-       .srgr2          = GSYNC | CLKSP | FSGM |
-                               FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
-       .pcr0           = CLKXP | CLKRP,        /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
-       .name                   = "PalmTT AIC23",
-       .mcbsp_regs_alsa        = &mcbsp_regs,
-       .codec_configure_dev    = NULL, /* aic23_configure, */
-       .codec_set_samplerate   = NULL, /* aic23_set_samplerate, */
-       .codec_clock_setup      = NULL, /* aic23_clock_setup, */
-       .codec_clock_on         = NULL, /* aic23_clock_on, */
-       .codec_clock_off        = NULL, /* aic23_clock_off, */
-       .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */
-};
-
-static struct platform_device palmtt_mcbsp1_device = {
-       .name   = "omap_alsa_mcbsp",
-       .id     = 1,
-       .dev    = {
-               .platform_data  = &alsa_config,
-       },
-};
-
 static struct resource palmtt_kp_resources[] = {
        [0] = {
                .start  = INT_KEYBOARD,
@@ -257,7 +217,6 @@ static struct platform_device palmtt_led_device = {
 
 static struct platform_device *palmtt_devices[] __initdata = {
        &palmtt_flash_device,
-       &palmtt_mcbsp1_device,
        &palmtt_kp_device,
        &palmtt_lcd_device,
        &palmtt_irda_device,
index cc05257..baf5efb 100644 (file)
@@ -32,7 +32,6 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <mach/mcbsp.h>
 #include <mach/gpio.h>
 #include <mach/mux.h>
 #include <mach/usb.h>
@@ -179,41 +178,6 @@ static struct platform_device palmz71_spi_device = {
        .id     = -1,
 };
 
-#define DEFAULT_BITPERSAMPLE 16
-
-static struct omap_mcbsp_reg_cfg mcbsp_regs = {
-       .spcr2  = FREE | FRST | GRST | XRST | XINTM(3),
-       .spcr1  = RINTM(3) | RRST,
-       .rcr2   = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) |
-                       RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0),
-       .rcr1   = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16),
-       .xcr2   = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) |
-                       XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG,
-       .xcr1   = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16),
-       .srgr1  = FWID(DEFAULT_BITPERSAMPLE - 1),
-       .srgr2  = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1),
-       .pcr0   = CLKXP | CLKRP,        /* mcbsp: slave */
-};
-
-static struct omap_alsa_codec_config alsa_config = {
-       .name                   = "PalmZ71 AIC23",
-       .mcbsp_regs_alsa        = &mcbsp_regs,
-       .codec_configure_dev    = NULL, /* aic23_configure */
-       .codec_set_samplerate   = NULL, /* aic23_set_samplerate */
-       .codec_clock_setup      = NULL, /* aic23_clock_setup */
-       .codec_clock_on         = NULL, /* aic23_clock_on */
-       .codec_clock_off        = NULL, /* aic23_clock_off */
-       .get_default_samplerate = NULL, /* aic23_get_default_samplerate */
-};
-
-static struct platform_device palmz71_mcbsp1_device = {
-       .name   = "omap_alsa_mcbsp",
-       .id     = 1,
-       .dev = {
-               .platform_data = &alsa_config,
-       },
-};
-
 static struct omap_backlight_config palmz71_backlight_config = {
        .default_intensity      = 0xa0,
 };
@@ -229,7 +193,6 @@ static struct platform_device palmz71_backlight_device = {
 static struct platform_device *devices[] __initdata = {
        &palmz71_rom_device,
        &palmz71_kp_device,
-       &palmz71_mcbsp1_device,
        &palmz71_lcd_device,
        &palmz71_irda_device,
        &palmz71_spi_device,
index 09a2422..28c76a1 100644 (file)
 
 #include <mach/gpio.h>
 #include <mach/mux.h>
+#include <mach/dma.h>
 #include <mach/irda.h>
 #include <mach/usb.h>
 #include <mach/tc.h>
 #include <mach/board.h>
 #include <mach/common.h>
-#include <mach/mcbsp.h>
-#include <mach/omap-alsa.h>
 #include <mach/keypad.h>
 
 /* Write to I2C device */
@@ -254,35 +253,6 @@ static struct platform_device sx1_irda_device = {
        .resource       = sx1_irda_resources,
 };
 
-/*----------- McBSP & Sound -------------------------*/
-
-/* Playback interface - McBSP1 */
-static struct omap_mcbsp_reg_cfg mcbsp1_regs = {
-       .spcr2  = XINTM(3),     /* SPCR2=30 */
-       .spcr1  = RINTM(3),     /* SPCR1=30 */
-       .rcr2   = 0,    /* RCR2 =00 */
-       .rcr1   = RFRLEN1(1) | RWDLEN1(OMAP_MCBSP_WORD_16),     /* RCR1=140 */
-       .xcr2   = 0,    /* XCR2 = 0 */
-       .xcr1   = XFRLEN1(1) | XWDLEN1(OMAP_MCBSP_WORD_16),     /* XCR1 = 140 */
-       .srgr1  = FWID(15) | CLKGDV(12),        /* SRGR1=0f0c */
-       .srgr2  = FSGM | FPER(31),      /* SRGR2=101f */
-       .pcr0   = FSXM | FSRM | CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP,
-                                               /* PCR0 =0f0f */
-};
-
-static struct omap_alsa_codec_config sx1_alsa_config = {
-       .name                   = "SX1 EGold",
-       .mcbsp_regs_alsa        = &mcbsp1_regs,
-};
-
-static struct platform_device sx1_mcbsp1_device = {
-       .name   = "omap_alsa_mcbsp",
-       .id     = 1,
-       .dev = {
-               .platform_data  = &sx1_alsa_config,
-       },
-};
-
 /*----------- MTD -------------------------*/
 
 static struct mtd_partition sx1_partitions[] = {
@@ -394,7 +364,6 @@ static struct platform_device *sx1_devices[] __initdata = {
        &sx1_flash_device,
        &sx1_kp_device,
        &sx1_lcd_device,
-       &sx1_mcbsp1_device,
        &sx1_irda_device,
 };
 /*-----------------------------------------*/
diff --git a/arch/arm/plat-omap/include/mach/aic23.h b/arch/arm/plat-omap/include/mach/aic23.h
deleted file mode 100644 (file)
index 5ccedac..0000000
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/aic23.h
- *
- * Hardware definitions for TI TLV320AIC23 audio codec
- *
- * Copyright (C) 2002 RidgeRun, Inc.
- * Author: Steve Johnson
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the  GNU General Public License along
- * with this program; if not, write  to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#ifndef __ASM_ARCH_AIC23_H
-#define __ASM_ARCH_AIC23_H
-
-// Codec TLV320AIC23
-#define LEFT_LINE_VOLUME_ADDR          0x00
-#define RIGHT_LINE_VOLUME_ADDR         0x01
-#define LEFT_CHANNEL_VOLUME_ADDR       0x02
-#define RIGHT_CHANNEL_VOLUME_ADDR      0x03
-#define ANALOG_AUDIO_CONTROL_ADDR      0x04
-#define DIGITAL_AUDIO_CONTROL_ADDR     0x05
-#define POWER_DOWN_CONTROL_ADDR                0x06
-#define DIGITAL_AUDIO_FORMAT_ADDR      0x07
-#define SAMPLE_RATE_CONTROL_ADDR       0x08
-#define DIGITAL_INTERFACE_ACT_ADDR     0x09
-#define RESET_CONTROL_ADDR             0x0F
-
-// Left (right) line input volume control register
-#define LRS_ENABLED                    0x0100
-#define LIM_MUTED                      0x0080
-#define LIV_DEFAULT                    0x0017
-#define LIV_MAX                                0x001f
-#define LIV_MIN                                0x0000
-
-// Left (right) channel headphone volume control register
-#define LZC_ON                         0x0080
-#define LHV_DEFAULT                    0x0079
-#define LHV_MAX                                0x007f
-#define LHV_MIN                                0x0000
-
-// Analog audio path control register
-#define STA_REG(x)                     ((x)<<6)
-#define STE_ENABLED                    0x0020
-#define DAC_SELECTED                   0x0010
-#define BYPASS_ON                      0x0008
-#define INSEL_MIC                      0x0004
-#define MICM_MUTED                     0x0002
-#define MICB_20DB                      0x0001
-
-// Digital audio path control register
-#define DACM_MUTE                      0x0008
-#define DEEMP_32K                      0x0002
-#define DEEMP_44K                      0x0004
-#define DEEMP_48K                      0x0006
-#define ADCHP_ON                       0x0001
-
-// Power control down register
-#define DEVICE_POWER_OFF               0x0080
-#define CLK_OFF                                0x0040
-#define OSC_OFF                                0x0020
-#define OUT_OFF                                0x0010
-#define DAC_OFF                                0x0008
-#define ADC_OFF                                0x0004
-#define MIC_OFF                                0x0002
-#define LINE_OFF                       0x0001
-
-// Digital audio interface register
-#define MS_MASTER                      0x0040
-#define LRSWAP_ON                      0x0020
-#define LRP_ON                         0x0010
-#define IWL_16                         0x0000
-#define IWL_20                         0x0004
-#define IWL_24                         0x0008
-#define IWL_32                         0x000C
-#define FOR_I2S                                0x0002
-#define FOR_DSP                                0x0003
-
-// Sample rate control register
-#define CLKOUT_HALF                    0x0080
-#define CLKIN_HALF                     0x0040
-#define BOSR_384fs                     0x0002 // BOSR_272fs when in USB mode
-#define USB_CLK_ON                     0x0001
-#define SR_MASK                         0xf
-#define CLKOUT_SHIFT                    7
-#define CLKIN_SHIFT                     6
-#define SR_SHIFT                        2
-#define BOSR_SHIFT                      1
-
-// Digital interface register
-#define ACT_ON                         0x0001
-
-#define TLV320AIC23ID1                  (0x1a) // cs low
-#define TLV320AIC23ID2                  (0x1b) // cs high
-
-void aic23_power_up(void);
-void aic23_power_down(void);
-
-#endif /* __ASM_ARCH_AIC23_H */