arm64: dts: exynos: correct PMIC interrupt trigger level on TM2

The Samsung PMIC datasheets describe the interrupt line as active low
with a requirement of acknowledge from the CPU.  Without specifying the
interrupt type in Devicetree, kernel might apply some fixed
configuration, not necessarily working for this hardware.

Fixes: 01e5d2352152 ("arm64: dts: exynos: Add dts file for Exynos5433-based TM2 board")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20201210212903.216728-7-krzk@kernel.org

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 03486a8..4c5106a 100644 (file)
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -388,7 +388,7 @@
        pmic@66 {
                compatible = "samsung,s2mps13-pmic";
                interrupt-parent = <&gpa0>;
-               interrupts = <7 IRQ_TYPE_NONE>;
+               interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
                reg = <0x66>;
                samsung,s2mps11-wrstbi-ground;