ARM: debug-ll: Add support for r7s9210

Enable low-level debugging support for RZ/A2M (r7s9210).

The RZA2MEVB board uses either SCIF2 (SDRAM enabled) or SCIF4 (HyperRAM
only) for the serial console.

Note that "SCIFA" serial ports on RZ/A2 SoCs use a compressed register
layout, hence add support for that to renesas-scif.S.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index c929bea9a9ffe56dd9db0b9498054f61fb9a9204..c029961d379595eb4e406fcc62f6932f80ed2396 100644 (file)
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -924,6 +924,20 @@ choice
                  Say Y here if you want kernel low-level debugging support
                  via SCIF2 on Renesas RZ/A1H (R7S72100).
 
+       config DEBUG_R7S9210_SCIF2
+               bool "Kernel low-level debugging messages via SCIF2 on R7S9210"
+               depends on ARCH_R7S9210
+               help
+                 Say Y here if you want kernel low-level debugging support
+                 via SCIF2 on Renesas RZ/A2M (R7S9210).
+
+       config DEBUG_R7S9210_SCIF4
+               bool "Kernel low-level debugging messages via SCIF4 on R7S9210"
+               depends on ARCH_R7S9210
+               help
+                 Say Y here if you want kernel low-level debugging support
+                 via SCIF4 on Renesas RZ/A2M (R7S9210).
+
        config DEBUG_RCAR_GEN1_SCIF0
                bool "Kernel low-level debugging messages via SCIF0 on R8A7778"
                depends on ARCH_R8A7778
@@ -1538,6 +1552,8 @@ config DEBUG_LL_INCLUDE
        default "debug/netx.S" if DEBUG_NETX_UART
        default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
        default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2
+       default "debug/renesas-scif.S" if DEBUG_R7S9210_SCIF2
+       default "debug/renesas-scif.S" if DEBUG_R7S9210_SCIF4
        default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF0
        default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF2
        default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF0
@@ -1668,7 +1684,8 @@ config DEBUG_UART_PHYS
        default 0xe6e60000 if DEBUG_RCAR_GEN2_SCIF0
        default 0xe6e68000 if DEBUG_RCAR_GEN2_SCIF1
        default 0xe6ee0000 if DEBUG_RCAR_GEN2_SCIF4
-       default 0xe8008000 if DEBUG_R7S72100_SCIF2
+       default 0xe8008000 if DEBUG_R7S72100_SCIF2 || DEBUG_R7S9210_SCIF2
+       default 0xe8009000 if DEBUG_R7S9210_SCIF4
        default 0xf0000000 if DEBUG_DIGICOLOR_UA0
        default 0xf0000be0 if ARCH_EBSA110
        default 0xf1012000 if DEBUG_MVEBU_UART0_ALTERNATE
@@ -1702,6 +1719,7 @@ config DEBUG_UART_PHYS
                DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
                DEBUG_NETX_UART || \
                DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
+               DEBUG_R7S9210_SCIF2 || DEBUG_R7S9210_SCIF4 || \
                DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \
                DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF1 || \
                DEBUG_RCAR_GEN2_SCIF2 || DEBUG_RCAR_GEN2_SCIF4 || \

diff --git a/arch/arm/include/debug/renesas-scif.S b/arch/arm/include/debug/renesas-scif.S
index 1c5f795587fc5681bc126dad8a44c7a26ad32f00..25f06663a9a4e2c1b2f569b8bb10b5c503a78e83 100644 (file)
--- a/arch/arm/include/debug/renesas-scif.S
+++ b/arch/arm/include/debug/renesas-scif.S
@@ -11,7 +11,11 @@
 #define SCIF_PHYS      CONFIG_DEBUG_UART_PHYS
 #define SCIF_VIRT      ((SCIF_PHYS & 0x00ffffff) | 0xfd000000)
 
-#if CONFIG_DEBUG_UART_PHYS < 0xe6e00000
+#if defined(CONFIG_DEBUG_R7S9210_SCIF2) || defined(CONFIG_DEBUG_R7S9210_SCIF4)
+/* RZ/A2 SCIFA */
+#define FTDR           0x06
+#define FSR            0x08
+#elif CONFIG_DEBUG_UART_PHYS < 0xe6e00000
 /* SCIFA */
 #define FTDR           0x20
 #define FSR            0x14