regulator: sm5703-regulator: Add regulators support for SM5703 MFD

Regulators block of SM5703 controls several voltage regulators which
are used to power various components. There are 3 LDO outputs ranging
from 1.5 to 3.3V, a buck regulator ranging from 1V to 3V, two fixed
voltage LDO regulators for powering the USB devices and one high-power
fixed voltage LDO line (actually two lines) meant to power high-power
USB devices.

Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
Link: https://lore.kernel.org/r/20220423085319.483524-6-markuss.broks@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index a7effc5..cbe0f96 100644 (file)
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -1167,6 +1167,13 @@ config REGULATOR_SLG51000
          The SLG51000 is seven compact and customizable low dropout
          regulators.
 
+config REGULATOR_SM5703
+       tristate "Silicon Mitus SM5703 regulators"
+       depends on MFD_SM5703
+       help
+         This driver provides support for voltage regulators of SM5703
+         multi-function device.
+
 config REGULATOR_STM32_BOOSTER
        tristate "STMicroelectronics STM32 BOOSTER"
        depends on ARCH_STM32 || COMPILE_TEST

diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 69b5a19..8d3ee8b 100644 (file)
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -139,6 +139,7 @@ obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
 obj-$(CONFIG_REGULATOR_SC2731) += sc2731-regulator.o
 obj-$(CONFIG_REGULATOR_SKY81452) += sky81452-regulator.o
 obj-$(CONFIG_REGULATOR_SLG51000) += slg51000-regulator.o
+obj-$(CONFIG_REGULATOR_SM5703) += sm5703-regulator.o
 obj-$(CONFIG_REGULATOR_STM32_BOOSTER) += stm32-booster.o
 obj-$(CONFIG_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o
 obj-$(CONFIG_REGULATOR_STM32_PWR) += stm32-pwr.o

diff --git a/drivers/regulator/sm5703-regulator.c b/drivers/regulator/sm5703-regulator.c
new file mode 100644 (file)
index 0000000..05ad28f
--- /dev/null
+++ b/drivers/regulator/sm5703-regulator.c
@@ -0,0 +1,167 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/mfd/sm5703.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+
+enum sm5703_regulators {
+       SM5703_BUCK,
+       SM5703_LDO1,
+       SM5703_LDO2,
+       SM5703_LDO3,
+       SM5703_USBLDO1,
+       SM5703_USBLDO2,
+       SM5703_VBUS,
+       SM5703_MAX_REGULATORS,
+};
+
+static const int sm5703_ldo_voltagemap[] = {
+       1500000, 1800000, 2600000, 2800000, 3000000, 3300000,
+};
+
+static const int sm5703_buck_voltagemap[] = {
+       1000000, 1000000, 1000000, 1000000,
+       1000000, 1000000, 1000000, 1000000,
+       1000000, 1000000, 1000000, 1100000,
+       1200000, 1300000, 1400000, 1500000,
+       1600000, 1700000, 1800000, 1900000,
+       2000000, 2100000, 2200000, 2300000,
+       2400000, 2500000, 2600000, 2700000,
+       2800000, 2900000, 3000000, 3000000,
+};
+
+#define SM5703USBLDO(_name, _id)                                       \
+       [SM5703_USBLDO ## _id] = {                                      \
+               .name = _name,                                          \
+               .of_match = _name,                                      \
+               .regulators_node = "regulators",                        \
+               .type = REGULATOR_VOLTAGE,                              \
+               .id = SM5703_USBLDO ## _id,                             \
+               .ops = &sm5703_regulator_ops_fixed,                     \
+               .fixed_uV = SM5703_USBLDO_MICROVOLT,                    \
+               .enable_reg = SM5703_REG_USBLDO12,                      \
+               .enable_mask = SM5703_REG_EN_USBLDO ##_id,              \
+               .owner                  = THIS_MODULE,                  \
+       }
+
+#define SM5703VBUS(_name)                                              \
+       [SM5703_VBUS] = {                                               \
+               .name = _name,                                          \
+               .of_match = _name,                                      \
+               .regulators_node = "regulators",                        \
+               .type = REGULATOR_VOLTAGE,                              \
+               .id = SM5703_VBUS,                                      \
+               .ops = &sm5703_regulator_ops_fixed,                     \
+               .fixed_uV = SM5703_VBUS_MICROVOLT,                      \
+               .enable_reg = SM5703_REG_CNTL,                          \
+               .enable_mask = SM5703_OPERATION_MODE_MASK,              \
+               .enable_val = SM5703_OPERATION_MODE_USB_OTG_MODE,       \
+               .disable_val = SM5703_OPERATION_MODE_CHARGING_ON,       \
+               .owner                  = THIS_MODULE,                  \
+       }
+
+#define SM5703BUCK(_name)                                              \
+       [SM5703_BUCK] = {                                               \
+               .name = _name,                                          \
+               .of_match = _name,                                      \
+               .regulators_node = "regulators",                        \
+               .type = REGULATOR_VOLTAGE,                              \
+               .id = SM5703_BUCK,                                      \
+               .ops = &sm5703_regulator_ops,                           \
+               .n_voltages = ARRAY_SIZE(sm5703_buck_voltagemap),       \
+               .volt_table = sm5703_buck_voltagemap,                   \
+               .vsel_reg = SM5703_REG_BUCK,                            \
+               .vsel_mask = SM5703_BUCK_VOLT_MASK,                     \
+               .enable_reg = SM5703_REG_BUCK,                          \
+               .enable_mask = SM5703_REG_EN_BUCK,                      \
+               .owner                  = THIS_MODULE,                  \
+       }
+
+#define SM5703LDO(_name, _id)                                          \
+       [SM5703_LDO ## _id] = {                                         \
+               .name = _name,                                          \
+               .of_match = _name,                                      \
+               .regulators_node = "regulators",                        \
+               .type = REGULATOR_VOLTAGE,                              \
+               .id = SM5703_LDO ## _id,                                \
+               .ops = &sm5703_regulator_ops,                           \
+               .n_voltages = ARRAY_SIZE(sm5703_ldo_voltagemap),        \
+               .volt_table = sm5703_ldo_voltagemap,                    \
+               .vsel_reg = SM5703_REG_LDO ##_id,                       \
+               .vsel_mask = SM5703_LDO_VOLT_MASK,                      \
+               .enable_reg = SM5703_REG_LDO ##_id,                     \
+               .enable_mask = SM5703_LDO_EN,                           \
+               .owner                  = THIS_MODULE,                  \
+       }
+
+static const struct regulator_ops sm5703_regulator_ops = {
+       .enable                 = regulator_enable_regmap,
+       .disable                = regulator_disable_regmap,
+       .is_enabled             = regulator_is_enabled_regmap,
+       .list_voltage           = regulator_list_voltage_table,
+       .get_voltage_sel        = regulator_get_voltage_sel_regmap,
+       .set_voltage_sel        = regulator_set_voltage_sel_regmap,
+};
+
+static const struct regulator_ops sm5703_regulator_ops_fixed = {
+       .enable                 = regulator_enable_regmap,
+       .disable                = regulator_disable_regmap,
+       .is_enabled             = regulator_is_enabled_regmap,
+};
+
+static struct regulator_desc sm5703_regulators_desc[SM5703_MAX_REGULATORS] = {
+       SM5703BUCK("buck"),
+       SM5703LDO("ldo1", 1),
+       SM5703LDO("ldo2", 2),
+       SM5703LDO("ldo3", 3),
+       SM5703USBLDO("usbldo1", 1),
+       SM5703USBLDO("usbldo2", 2),
+       SM5703VBUS("vbus"),
+};
+
+static int sm5703_regulator_probe(struct platform_device *pdev)
+{
+       struct device *dev = &pdev->dev;
+       struct regulator_config config = { NULL, };
+       struct regulator_dev *rdev;
+       struct sm5703_dev *sm5703 = dev_get_drvdata(pdev->dev.parent);
+       int i;
+
+       config.dev = dev->parent;
+       config.regmap = sm5703->regmap;
+
+       for (i = 0; i < SM5703_MAX_REGULATORS; i++) {
+               rdev = devm_regulator_register(dev,
+                                              &sm5703_regulators_desc[i],
+                                              &config);
+               if (IS_ERR(rdev))
+                       return dev_err_probe(dev, PTR_ERR(rdev),
+                                            "Failed to register a regulator\n");
+       }
+
+       return 0;
+}
+
+static const struct platform_device_id sm5703_regulator_id[] = {
+       { "sm5703-regulator", 0 },
+       {}
+};
+MODULE_DEVICE_TABLE(platform, sm5703_regulator_id);
+
+static struct platform_driver sm5703_regulator_driver = {
+       .driver = {
+               .name = "sm5703-regulator",
+       },
+       .probe  = sm5703_regulator_probe,
+       .id_table       = sm5703_regulator_id,
+};
+
+module_platform_driver(sm5703_regulator_driver);
+
+MODULE_DESCRIPTION("Silicon Mitus SM5703 LDO/Buck/USB regulator driver");
+MODULE_AUTHOR("Markuss Broks <markuss.broks@gmail.com>");
+MODULE_LICENSE("GPL");