wl1271: Add top-register access functions

Add top register access function.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/wl12xx/wl1271_boot.c b/drivers/net/wireless/wl12xx/wl1271_boot.c
index 2eb7836..1a3084c 100644 (file)
--- a/drivers/net/wireless/wl12xx/wl1271_boot.c
+++ b/drivers/net/wireless/wl12xx/wl1271_boot.c
@@ -419,34 +419,13 @@ static int wl1271_boot_run_firmware(struct wl1271 *wl)
 
 static int wl1271_boot_write_irq_polarity(struct wl1271 *wl)
 {
-       u32 polarity, status, i;
+       u32 polarity;
 
-       wl1271_reg_write32(wl, OCP_POR_CTR, OCP_REG_POLARITY);
-       wl1271_reg_write32(wl, OCP_CMD, OCP_CMD_READ);
-
-       /* Wait until the command is complete (ie. bit 18 is set) */
-       for (i = 0; i < OCP_CMD_LOOP; i++) {
-               polarity = wl1271_reg_read32(wl, OCP_DATA_READ);
-               if (polarity & OCP_READY_MASK)
-                       break;
-       }
-       if (i == OCP_CMD_LOOP) {
-               wl1271_error("OCP command timeout!");
-               return -EIO;
-       }
-
-       status = polarity & OCP_STATUS_MASK;
-       if (status != OCP_STATUS_OK) {
-               wl1271_error("OCP command failed (%d)", status);
-               return -EIO;
-       }
+       polarity = wl1271_top_reg_read(wl, OCP_REG_POLARITY);
 
        /* We use HIGH polarity, so unset the LOW bit */
        polarity &= ~POLARITY_LOW;
-
-       wl1271_reg_write32(wl, OCP_POR_CTR, OCP_REG_POLARITY);
-       wl1271_reg_write32(wl, OCP_DATA_WRITE, polarity);
-       wl1271_reg_write32(wl, OCP_CMD, OCP_CMD_WRITE);
+       wl1271_top_reg_write(wl, OCP_REG_POLARITY, polarity);
 
        return 0;
 }

diff --git a/drivers/net/wireless/wl12xx/wl1271_boot.h b/drivers/net/wireless/wl12xx/wl1271_boot.h
index b0d8fb4..4501653 100644 (file)
--- a/drivers/net/wireless/wl12xx/wl1271_boot.h
+++ b/drivers/net/wireless/wl12xx/wl1271_boot.h
@@ -50,20 +50,7 @@ struct wl1271_static_data {
 #define WU_COUNTER_PAUSE_VAL 0x3FF
 #define WELP_ARM_COMMAND_VAL 0x4
 
-#define OCP_CMD_LOOP  32
-
-#define OCP_CMD_WRITE 0x1
-#define OCP_CMD_READ  0x2
-
-#define OCP_READY_MASK  BIT(18)
-#define OCP_STATUS_MASK (BIT(16) | BIT(17))
-
-#define OCP_STATUS_NO_RESP    0x00000
-#define OCP_STATUS_OK         0x10000
-#define OCP_STATUS_REQ_FAILED 0x20000
-#define OCP_STATUS_RESP_ERROR 0x30000
-
-#define OCP_REG_POLARITY 0x30032
+#define OCP_REG_POLARITY 0x0064
 
 #define CMD_MBOX_ADDRESS 0x407B4
 

diff --git a/drivers/net/wireless/wl12xx/wl1271_spi.c b/drivers/net/wireless/wl12xx/wl1271_spi.c
index 367f2d3..7a7890b 100644 (file)
--- a/drivers/net/wireless/wl12xx/wl1271_spi.c
+++ b/drivers/net/wireless/wl12xx/wl1271_spi.c
@@ -395,3 +395,49 @@ void wl1271_reg_write32(struct wl1271 *wl, int addr, u32 val)
 {
        wl1271_write32(wl, wl1271_translate_addr(wl, addr), val);
 }
+
+void wl1271_top_reg_write(struct wl1271 *wl, int addr, u16 val)
+{
+       /* write address >> 1 + 0x30000 to OCP_POR_CTR */
+       addr = (addr >> 1) + 0x30000;
+       wl1271_reg_write32(wl, OCP_POR_CTR, addr);
+
+       /* write value to OCP_POR_WDATA */
+       wl1271_reg_write32(wl, OCP_DATA_WRITE, val);
+
+       /* write 1 to OCP_CMD */
+       wl1271_reg_write32(wl, OCP_CMD, OCP_CMD_WRITE);
+}
+
+u16 wl1271_top_reg_read(struct wl1271 *wl, int addr)
+{
+       u32 val;
+       int timeout = OCP_CMD_LOOP;
+
+       /* write address >> 1 + 0x30000 to OCP_POR_CTR */
+       addr = (addr >> 1) + 0x30000;
+       wl1271_reg_write32(wl, OCP_POR_CTR, addr);
+
+       /* write 2 to OCP_CMD */
+       wl1271_reg_write32(wl, OCP_CMD, OCP_CMD_READ);
+
+       /* poll for data ready */
+       do {
+               val = wl1271_reg_read32(wl, OCP_DATA_READ);
+               timeout--;
+       } while (!(val & OCP_READY_MASK) && timeout);
+
+       if (!timeout) {
+               wl1271_warning("Top register access timed out.");
+               return 0xffff;
+       }
+
+       /* check data status and return if OK */
+       if ((val & OCP_STATUS_MASK) == OCP_STATUS_OK)
+               return val & 0xffff;
+       else {
+               wl1271_warning("Top register access returned error.");
+               return 0xffff;
+       }
+}
+

diff --git a/drivers/net/wireless/wl12xx/wl1271_spi.h b/drivers/net/wireless/wl12xx/wl1271_spi.h
index c58e027..4f1608e 100644 (file)
--- a/drivers/net/wireless/wl12xx/wl1271_spi.h
+++ b/drivers/net/wireless/wl12xx/wl1271_spi.h
@@ -71,6 +71,18 @@
                ((WL1271_BUSY_WORD_LEN - 4) / sizeof(u32))
 #define HW_ACCESS_WSPI_INIT_CMD_MASK  0
 
+#define OCP_CMD_LOOP  32
+
+#define OCP_CMD_WRITE 0x1
+#define OCP_CMD_READ  0x2
+
+#define OCP_READY_MASK  BIT(18)
+#define OCP_STATUS_MASK (BIT(16) | BIT(17))
+
+#define OCP_STATUS_NO_RESP    0x00000
+#define OCP_STATUS_OK         0x10000
+#define OCP_STATUS_REQ_FAILED 0x20000
+#define OCP_STATUS_RESP_ERROR 0x30000
 
 /* Raw target IO, address is not translated */
 void wl1271_spi_write(struct wl1271 *wl, int addr, void *buf,
@@ -92,6 +104,10 @@ void wl1271_spi_reg_write(struct wl1271 *wl, int addr, void *buf, size_t len,
 u32 wl1271_reg_read32(struct wl1271 *wl, int addr);
 void wl1271_reg_write32(struct wl1271 *wl, int addr, u32 val);
 
+/* Top Register IO */
+void wl1271_top_reg_write(struct wl1271 *wl, int addr, u16 val);
+u16 wl1271_top_reg_read(struct wl1271 *wl, int addr);
+
 /* INIT and RESET words */
 void wl1271_spi_reset(struct wl1271 *wl);
 void wl1271_spi_init(struct wl1271 *wl);