[SERIAL] typo: buad -> baud

Replacing mistyped "buad" with "baud" where applicable.

Signed-off-by: Horst Schirmeier <horst@schirmeier.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

diff --git a/arch/mips/ddb5xxx/ddb5476/dbg_io.c b/arch/mips/ddb5xxx/ddb5476/dbg_io.c
index 85e9e50..f2296a9 100644 (file)
--- a/arch/mips/ddb5xxx/ddb5476/dbg_io.c
+++ b/arch/mips/ddb5xxx/ddb5476/dbg_io.c
@@ -86,7 +86,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
         /* disable interrupts */
         UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-        /* set up buad rate */
+        /* set up baud rate */
         {
                 uint32 divisor;
 

diff --git a/arch/mips/ddb5xxx/ddb5477/kgdb_io.c b/arch/mips/ddb5xxx/ddb5477/kgdb_io.c
index 1d18d59..385bbdb 100644 (file)
--- a/arch/mips/ddb5xxx/ddb5477/kgdb_io.c
+++ b/arch/mips/ddb5xxx/ddb5477/kgdb_io.c
@@ -86,7 +86,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
         /* disable interrupts */
         UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-        /* set up buad rate */
+        /* set up baud rate */
         {
                 uint32 divisor;
 

diff --git a/arch/mips/gt64120/ev64120/serialGT.c b/arch/mips/gt64120/ev64120/serialGT.c
index 16e34a5..8f0d835 100644 (file)
--- a/arch/mips/gt64120/ev64120/serialGT.c
+++ b/arch/mips/gt64120/ev64120/serialGT.c
@@ -149,7 +149,7 @@ void serial_set(int channel, unsigned long baud)
 #else
        /*
         * Note: Set baud rate, hardcoded here for rate of 115200
-        * since became unsure of above "buad rate" algorithm (??).
+        * since became unsure of above "baud rate" algorithm (??).
         */
        outreg(channel, LCR, 0x83);
        outreg(channel, DLM, 0x00);     // See note above

diff --git a/arch/mips/gt64120/momenco_ocelot/dbg_io.c b/arch/mips/gt64120/momenco_ocelot/dbg_io.c
index 8720bcc..f0a6a38 100644 (file)
--- a/arch/mips/gt64120/momenco_ocelot/dbg_io.c
+++ b/arch/mips/gt64120/momenco_ocelot/dbg_io.c
@@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
        /* disable interrupts */
        UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-       /* set up buad rate */
+       /* set up baud rate */
        {
                uint32 divisor;
 

diff --git a/arch/mips/ite-boards/generic/dbg_io.c b/arch/mips/ite-boards/generic/dbg_io.c
index c4f8530..6a7ccaf 100644 (file)
--- a/arch/mips/ite-boards/generic/dbg_io.c
+++ b/arch/mips/ite-boards/generic/dbg_io.c
@@ -72,7 +72,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
        /* disable interrupts */
        UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-       /* set up buad rate */
+       /* set up baud rate */
        {
                uint32 divisor;
 

diff --git a/arch/mips/momentum/jaguar_atx/dbg_io.c b/arch/mips/momentum/jaguar_atx/dbg_io.c
index 542eac8..d7dea0a 100644 (file)
--- a/arch/mips/momentum/jaguar_atx/dbg_io.c
+++ b/arch/mips/momentum/jaguar_atx/dbg_io.c
@@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
        /* disable interrupts */
        UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-       /* set up buad rate */
+       /* set up baud rate */
        {
                uint32 divisor;
 

diff --git a/arch/mips/momentum/ocelot_c/dbg_io.c b/arch/mips/momentum/ocelot_c/dbg_io.c
index 8720bcc..f0a6a38 100644 (file)
--- a/arch/mips/momentum/ocelot_c/dbg_io.c
+++ b/arch/mips/momentum/ocelot_c/dbg_io.c
@@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
        /* disable interrupts */
        UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-       /* set up buad rate */
+       /* set up baud rate */
        {
                uint32 divisor;
 

diff --git a/arch/mips/momentum/ocelot_g/dbg_io.c b/arch/mips/momentum/ocelot_g/dbg_io.c
index 8720bcc..f0a6a38 100644 (file)
--- a/arch/mips/momentum/ocelot_g/dbg_io.c
+++ b/arch/mips/momentum/ocelot_g/dbg_io.c
@@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
        /* disable interrupts */
        UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-       /* set up buad rate */
+       /* set up baud rate */
        {
                uint32 divisor;
 

diff --git a/include/asm-arm/arch-l7200/serial_l7200.h b/include/asm-arm/arch-l7200/serial_l7200.h
index 238c595..b1008a9 100644 (file)
--- a/include/asm-arm/arch-l7200/serial_l7200.h
+++ b/include/asm-arm/arch-l7200/serial_l7200.h
@@ -28,7 +28,7 @@
 #define UARTDR                 0x00    /* Tx/Rx data */
 #define RXSTAT                 0x04    /* Rx status */
 #define H_UBRLCR               0x08    /* mode register high */
-#define M_UBRLCR               0x0C    /* mode reg mid (MSB of buad)*/
+#define M_UBRLCR               0x0C    /* mode reg mid (MSB of baud)*/
 #define L_UBRLCR               0x10    /* mode reg low (LSB of baud)*/
 #define UARTCON                        0x14    /* control register */
 #define UARTFLG                        0x18    /* flag register */

diff --git a/include/asm-arm/arch-l7200/uncompress.h b/include/asm-arm/arch-l7200/uncompress.h
index 9fcd40a..04be2a0 100644 (file)
--- a/include/asm-arm/arch-l7200/uncompress.h
+++ b/include/asm-arm/arch-l7200/uncompress.h
@@ -6,7 +6,7 @@
  * Changelog:
  *  05-01-2000 SJH     Created
  *  05-13-2000 SJH     Filled in function bodies
- *  07-26-2000 SJH     Removed hard coded buad rate
+ *  07-26-2000 SJH     Removed hard coded baud rate
  */
 
 #include <asm/hardware.h>