--- /dev/null
+/*
+ * Faraday USB 2.0 EHCI Controller
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <usb.h>
+#include <usb/fusbh200.h>
+#include <usb/fotg210.h>
+
+#include "ehci.h"
+
+#ifndef CONFIG_USB_EHCI_BASE_LIST
+#define CONFIG_USB_EHCI_BASE_LIST { CONFIG_USB_EHCI_BASE }
+#endif
+
+union ehci_faraday_regs {
+ struct fusbh200_regs usb;
+ struct fotg210_regs otg;
+};
+
+static inline int ehci_is_fotg2xx(union ehci_faraday_regs *regs)
+{
+ return !readl(®s->usb.easstr);
+}
+
+/*
+ * Create the appropriate control structures to manage
+ * a new EHCI host controller.
+ */
+int ehci_hcd_init(int index, struct ehci_hccr **ret_hccr,
+ struct ehci_hcor **ret_hcor)
+{
+ struct ehci_hccr *hccr;
+ struct ehci_hcor *hcor;
+ union ehci_faraday_regs *regs;
+ uint32_t base_list[] = CONFIG_USB_EHCI_BASE_LIST;
+
+ if (index < 0 || index >= ARRAY_SIZE(base_list))
+ return -1;
+ regs = (void __iomem *)base_list[index];
+ hccr = (struct ehci_hccr *)®s->usb.hccr;
+ hcor = (struct ehci_hcor *)®s->usb.hcor;
+
+ if (ehci_is_fotg2xx(regs)) {
+ /* A-device bus reset */
+ /* ... Power off A-device */
+ setbits_le32(®s->otg.otgcsr, OTGCSR_A_BUSDROP);
+ /* ... Drop vbus and bus traffic */
+ clrbits_le32(®s->otg.otgcsr, OTGCSR_A_BUSREQ);
+ mdelay(1);
+ /* ... Power on A-device */
+ clrbits_le32(®s->otg.otgcsr, OTGCSR_A_BUSDROP);
+ /* ... Drive vbus and bus traffic */
+ setbits_le32(®s->otg.otgcsr, OTGCSR_A_BUSREQ);
+ mdelay(1);
+ /* Disable OTG & DEV interrupts, triggered at level-high */
+ writel(IMR_IRQLH | IMR_OTG | IMR_DEV, ®s->otg.imr);
+ /* Clear all interrupt status */
+ writel(ISR_HOST | ISR_OTG | ISR_DEV, ®s->otg.isr);
+ } else {
+ /* Interrupt=level-high */
+ setbits_le32(®s->usb.bmcsr, BMCSR_IRQLH);
+ /* VBUS on */
+ clrbits_le32(®s->usb.bmcsr, BMCSR_VBUS_OFF);
+ /* Disable all interrupts */
+ writel(0x00, ®s->usb.bmier);
+ writel(0x1f, ®s->usb.bmisr);
+ }
+
+ *ret_hccr = hccr;
+ *ret_hcor = hcor;
+
+ return 0;
+}
+
+/*
+ * Destroy the appropriate control structures corresponding
+ * the the EHCI host controller.
+ */
+int ehci_hcd_stop(int index)
+{
+ return 0;
+}
+
+/*
+ * This ehci_set_usbmode() overrides the weak function
+ * in "ehci-hcd.c".
+ */
+void ehci_set_usbmode(int index)
+{
+ /* nothing needs to be done */
+}
+
+/*
+ * This ehci_get_port_speed() overrides the weak function
+ * in "ehci-hcd.c".
+ */
+int ehci_get_port_speed(struct ehci_hcor *hcor, uint32_t reg)
+{
+ int spd, ret = PORTSC_PSPD_HS;
+ union ehci_faraday_regs *regs = (void __iomem *)((ulong)hcor - 0x10);
+
+ if (ehci_is_fotg2xx(regs))
+ spd = OTGCSR_SPD(readl(®s->otg.otgcsr));
+ else
+ spd = BMCSR_SPD(readl(®s->usb.bmcsr));
+
+ switch (spd) {
+ case 0: /* full speed */
+ ret = PORTSC_PSPD_FS;
+ break;
+ case 1: /* low speed */
+ ret = PORTSC_PSPD_LS;
+ break;
+ case 2: /* high speed */
+ ret = PORTSC_PSPD_HS;
+ break;
+ default:
+ printf("ehci-faraday: invalid device speed\n");
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * This ehci_get_portsc_register() overrides the weak function
+ * in "ehci-hcd.c".
+ */
+uint32_t *ehci_get_portsc_register(struct ehci_hcor *hcor, int port)
+{
+ /* Faraday EHCI has one and only one portsc register */
+ if (port) {
+ /* Printing the message would cause a scan failure! */
+ debug("The request port(%d) is not configured\n", port);
+ return NULL;
+ }
+
+ /* Faraday EHCI PORTSC register offset is 0x20 from hcor */
+ return (uint32_t *)((uint8_t *)hcor + 0x20);
+}
--- /dev/null
+/*
+ * Faraday USB 2.0 OTG Controller
+ *
+ * (C) Copyright 2010 Faraday Technology
+ * Dante Su <dantesu@faraday-tech.com>
+ *
+ * This file is released under the terms of GPL v2 and any later version.
+ * See the file COPYING in the root directory of the source tree for details.
+ */
+
+#ifndef _FOTG210_H
+#define _FOTG210_H
+
+struct fotg210_regs {
+ /* USB Host Controller */
+ struct {
+ uint32_t data[4];
+ } hccr; /* 0x00 - 0x0f: hccr */
+ struct {
+ uint32_t data[9];
+ } hcor; /* 0x10 - 0x33: hcor */
+ uint32_t rsvd1[3];
+ uint32_t miscr; /* 0x40: Miscellaneous Register */
+ uint32_t rsvd2[15];
+ /* USB OTG Controller */
+ uint32_t otgcsr;/* 0x80: OTG Control Status Register */
+ uint32_t otgisr;/* 0x84: OTG Interrupt Status Register */
+ uint32_t otgier;/* 0x88: OTG Interrupt Enable Register */
+ uint32_t rsvd3[13];
+ uint32_t isr; /* 0xC0: Global Interrupt Status Register */
+ uint32_t imr; /* 0xC4: Global Interrupt Mask Register */
+ uint32_t rsvd4[14];
+ /* USB Device Controller */
+ uint32_t dev_ctrl;/* 0x100: Device Control Register */
+ uint32_t dev_addr;/* 0x104: Device Address Register */
+ uint32_t dev_test;/* 0x108: Device Test Register */
+ uint32_t sof_fnr; /* 0x10c: SOF Frame Number Register */
+ uint32_t sof_mtr; /* 0x110: SOF Mask Timer Register */
+ uint32_t phy_tmsr;/* 0x114: PHY Test Mode Selector Register */
+ uint32_t rsvd5[2];
+ uint32_t cxfifo;/* 0x120: CX FIFO Register */
+ uint32_t idle; /* 0x124: IDLE Counter Register */
+ uint32_t rsvd6[2];
+ uint32_t gimr; /* 0x130: Group Interrupt Mask Register */
+ uint32_t gimr0; /* 0x134: Group Interrupt Mask Register 0 */
+ uint32_t gimr1; /* 0x138: Group Interrupt Mask Register 1 */
+ uint32_t gimr2; /* 0x13c: Group Interrupt Mask Register 2 */
+ uint32_t gisr; /* 0x140: Group Interrupt Status Register */
+ uint32_t gisr0; /* 0x144: Group Interrupt Status Register 0 */
+ uint32_t gisr1; /* 0x148: Group Interrupt Status Register 1 */
+ uint32_t gisr2; /* 0x14c: Group Interrupt Status Register 2 */
+ uint32_t rxzlp; /* 0x150: Receive Zero-Length-Packet Register */
+ uint32_t txzlp; /* 0x154: Transfer Zero-Length-Packet Register */
+ uint32_t isoeasr;/* 0x158: ISOC Error/Abort Status Register */
+ uint32_t rsvd7[1];
+ uint32_t iep[8]; /* 0x160 - 0x17f: IN Endpoint Register */
+ uint32_t oep[8]; /* 0x180 - 0x19f: OUT Endpoint Register */
+ uint32_t epmap14;/* 0x1a0: Endpoint Map Register (EP1 ~ 4) */
+ uint32_t epmap58;/* 0x1a4: Endpoint Map Register (EP5 ~ 8) */
+ uint32_t fifomap;/* 0x1a8: FIFO Map Register */
+ uint32_t fifocfg; /* 0x1ac: FIFO Configuration Register */
+ uint32_t fifocsr[4];/* 0x1b0 - 0x1bf: FIFO Control Status Register */
+ uint32_t dma_fifo; /* 0x1c0: DMA Target FIFO Register */
+ uint32_t rsvd8[1];
+ uint32_t dma_ctrl; /* 0x1c8: DMA Control Register */
+ uint32_t dma_addr; /* 0x1cc: DMA Address Register */
+ uint32_t ep0_data; /* 0x1d0: EP0 Setup Packet PIO Register */
+};
+
+/* Miscellaneous Register */
+#define MISCR_SUSPEND (1 << 6) /* Put transceiver in suspend mode */
+#define MISCR_EOF2(x) (((x) & 0x3) << 4) /* EOF 2 Timing */
+#define MISCR_EOF1(x) (((x) & 0x3) << 2) /* EOF 1 Timing */
+#define MISCR_ASST(x) (((x) & 0x3) << 0) /* Async. Sched. Sleep Timer */
+
+/* OTG Control Status Register */
+#define OTGCSR_SPD_HIGH (2 << 22) /* Speed of the attached device (host) */
+#define OTGCSR_SPD_LOW (1 << 22)
+#define OTGCSR_SPD_FULL (0 << 22)
+#define OTGCSR_SPD_MASK (3 << 22)
+#define OTGCSR_SPD_SHIFT 22
+#define OTGCSR_SPD(x) (((x) >> 22) & 0x03)
+#define OTGCSR_DEV_A (0 << 21) /* Acts as A-device */
+#define OTGCSR_DEV_B (1 << 21) /* Acts as B-device */
+#define OTGCSR_ROLE_H (0 << 20) /* Acts as Host */
+#define OTGCSR_ROLE_D (1 << 20) /* Acts as Device */
+#define OTGCSR_A_VBUS_VLD (1 << 19) /* A-device VBUS Valid */
+#define OTGCSR_A_SESS_VLD (1 << 18) /* A-device Session Valid */
+#define OTGCSR_B_SESS_VLD (1 << 17) /* B-device Session Valid */
+#define OTGCSR_B_SESS_END (1 << 16) /* B-device Session End */
+#define OTGCSR_HFT_LONG (1 << 11) /* HDISCON noise filter = 270 us*/
+#define OTGCSR_HFT (0 << 11) /* HDISCON noise filter = 135 us*/
+#define OTGCSR_VFT_LONG (1 << 10) /* VBUS noise filter = 472 us*/
+#define OTGCSR_VFT (0 << 10) /* VBUS noise filter = 135 us*/
+#define OTGCSR_IDFT_LONG (1 << 9) /* ID noise filter = 4 ms*/
+#define OTGCSR_IDFT (0 << 9) /* ID noise filter = 3 ms*/
+#define OTGCSR_A_SRPR_VBUS (0 << 8) /* A-device: SRP responds to VBUS */
+#define OTGCSR_A_SRPR_DATA (1 << 8) /* A-device: SRP responds to DATA-LINE */
+#define OTGCSR_A_SRP_EN (1 << 7) /* A-device SRP detection enabled */
+#define OTGCSR_A_HNP (1 << 6) /* Set role=A-device with HNP enabled */
+#define OTGCSR_A_BUSDROP (1 << 5) /* A-device drop bus (power-down) */
+#define OTGCSR_A_BUSREQ (1 << 4) /* A-device request bus */
+#define OTGCSR_B_VBUS_DISC (1 << 2) /* B-device discharges VBUS */
+#define OTGCSR_B_HNP (1 << 1) /* B-device enable HNP */
+#define OTGCSR_B_BUSREQ (1 << 0) /* B-device request bus */
+
+/* OTG Interrupt Status Register */
+#define OTGISR_APRM (1 << 12) /* Mini-A plug removed */
+#define OTGISR_BPRM (1 << 11) /* Mini-B plug removed */
+#define OTGISR_OVD (1 << 10) /* over-current detected */
+#define OTGISR_IDCHG (1 << 9) /* ID(A/B) changed */
+#define OTGISR_RLCHG (1 << 8) /* Role(Host/Device) changed */
+#define OTGISR_BSESSEND (1 << 6) /* B-device Session End */
+#define OTGISR_AVBUSERR (1 << 5) /* A-device VBUS Error */
+#define OTGISR_ASRP (1 << 4) /* A-device SRP detected */
+#define OTGISR_BSRP (1 << 0) /* B-device SRP complete */
+
+/* OTG Interrupt Enable Register */
+#define OTGIER_APRM (1 << 12) /* Mini-A plug removed */
+#define OTGIER_BPRM (1 << 11) /* Mini-B plug removed */
+#define OTGIER_OVD (1 << 10) /* over-current detected */
+#define OTGIER_IDCHG (1 << 9) /* ID(A/B) changed */
+#define OTGIER_RLCHG (1 << 8) /* Role(Host/Device) changed */
+#define OTGIER_BSESSEND (1 << 6) /* B-device Session End */
+#define OTGIER_AVBUSERR (1 << 5) /* A-device VBUS Error */
+#define OTGIER_ASRP (1 << 4) /* A-device SRP detected */
+#define OTGIER_BSRP (1 << 0) /* B-device SRP complete */
+
+/* Global Interrupt Status Register (W1C) */
+#define ISR_HOST (1 << 2) /* USB Host interrupt */
+#define ISR_OTG (1 << 1) /* USB OTG interrupt */
+#define ISR_DEV (1 << 0) /* USB Device interrupt */
+#define ISR_MASK 0x07
+
+/* Global Interrupt Mask Register */
+#define IMR_IRQLH (1 << 3) /* Interrupt triggered at level-high */
+#define IMR_IRQLL (0 << 3) /* Interrupt triggered at level-low */
+#define IMR_HOST (1 << 2) /* USB Host interrupt */
+#define IMR_OTG (1 << 1) /* USB OTG interrupt */
+#define IMR_DEV (1 << 0) /* USB Device interrupt */
+#define IMR_MASK 0x0f
+
+/* Device Control Register */
+#define DEVCTRL_FS_FORCED (1 << 9) /* Forced to be Full-Speed Mode */
+#define DEVCTRL_HS (1 << 6) /* High Speed Mode */
+#define DEVCTRL_FS (0 << 6) /* Full Speed Mode */
+#define DEVCTRL_EN (1 << 5) /* Chip Enable */
+#define DEVCTRL_RESET (1 << 4) /* Chip Software Reset */
+#define DEVCTRL_SUSPEND (1 << 3) /* Enter Suspend Mode */
+#define DEVCTRL_GIRQ_EN (1 << 2) /* Global Interrupt Enabled */
+#define DEVCTRL_HALFSPD (1 << 1) /* Half speed mode for FPGA test */
+#define DEVCTRL_RWAKEUP (1 << 0) /* Enable remote wake-up */
+
+/* Device Address Register */
+#define DEVADDR_CONF (1 << 7) /* SET_CONFIGURATION has been executed */
+#define DEVADDR_ADDR(x) ((x) & 0x7f)
+#define DEVADDR_ADDR_MASK 0x7f
+
+/* Device Test Register */
+#define DEVTEST_NOSOF (1 << 6) /* Do not generate SOF */
+#define DEVTEST_TST_MODE (1 << 5) /* Enter Test Mode */
+#define DEVTEST_TST_NOTS (1 << 4) /* Do not toggle sequence */
+#define DEVTEST_TST_NOCRC (1 << 3) /* Do not append CRC */
+#define DEVTEST_TST_CLREA (1 << 2) /* Clear External Side Address */
+#define DEVTEST_TST_CXLP (1 << 1) /* EP0 loopback test */
+#define DEVTEST_TST_CLRFF (1 << 0) /* Clear FIFO */
+
+/* SOF Frame Number Register */
+#define SOFFNR_UFN(x) (((x) >> 11) & 0x7) /* SOF Micro-Frame Number */
+#define SOFFNR_FNR(x) ((x) & 0x7ff) /* SOF Frame Number */
+
+/* SOF Mask Timer Register */
+#define SOFMTR_TMR(x) ((x) & 0xffff)
+
+/* PHY Test Mode Selector Register */
+#define PHYTMSR_TST_PKT (1 << 4) /* Packet send test */
+#define PHYTMSR_TST_SE0NAK (1 << 3) /* High-Speed quiescent state */
+#define PHYTMSR_TST_KSTA (1 << 2) /* High-Speed K state */
+#define PHYTMSR_TST_JSTA (1 << 1) /* High-Speed J state */
+#define PHYTMSR_UNPLUG (1 << 0) /* Enable soft-detachment */
+
+/* CX FIFO Register */
+#define CXFIFO_BYTES(x) (((x) >> 24) & 0x7f) /* CX/EP0 FIFO byte count */
+#define CXFIFO_FIFOE(x) (1 << (((x) & 0x03) + 8)) /* EPx FIFO empty */
+#define CXFIFO_FIFOE_FIFO0 (1 << 8)
+#define CXFIFO_FIFOE_FIFO1 (1 << 9)
+#define CXFIFO_FIFOE_FIFO2 (1 << 10)
+#define CXFIFO_FIFOE_FIFO3 (1 << 11)
+#define CXFIFO_FIFOE_MASK (0x0f << 8)
+#define CXFIFO_CXFIFOE (1 << 5) /* CX FIFO empty */
+#define CXFIFO_CXFIFOF (1 << 4) /* CX FIFO full */
+#define CXFIFO_CXFIFOCLR (1 << 3) /* CX FIFO clear */
+#define CXFIFO_CXSTALL (1 << 2) /* CX Stall */
+#define CXFIFO_TSTPKTFIN (1 << 1) /* Test packet data transfer finished */
+#define CXFIFO_CXFIN (1 << 0) /* CX data transfer finished */
+
+/* IDLE Counter Register */
+#define IDLE_MS(x) ((x) & 0x07) /* PHY suspend delay = x ms */
+
+/* Group Interrupt Mask(Disable) Register */
+#define GIMR_GRP2 (1 << 2) /* Disable interrupt group 2 */
+#define GIMR_GRP1 (1 << 1) /* Disable interrupt group 1 */
+#define GIMR_GRP0 (1 << 0) /* Disable interrupt group 0 */
+#define GIMR_MASK 0x07
+
+/* Group Interrupt Mask(Disable) Register 0 (CX) */
+#define GIMR0_CXABORT (1 << 5) /* CX command abort interrupt */
+#define GIMR0_CXERR (1 << 4) /* CX command error interrupt */
+#define GIMR0_CXEND (1 << 3) /* CX command end interrupt */
+#define GIMR0_CXOUT (1 << 2) /* EP0-OUT packet interrupt */
+#define GIMR0_CXIN (1 << 1) /* EP0-IN packet interrupt */
+#define GIMR0_CXSETUP (1 << 0) /* EP0-SETUP packet interrupt */
+#define GIMR0_MASK 0x3f
+
+/* Group Interrupt Mask(Disable) Register 1 (FIFO) */
+#define GIMR1_FIFO_IN(x) (1 << (((x) & 3) + 16)) /* FIFOx IN */
+#define GIMR1_FIFO_TX(x) GIMR1_FIFO_IN(x)
+#define GIMR1_FIFO_OUT(x) (1 << (((x) & 3) * 2)) /* FIFOx OUT */
+#define GIMR1_FIFO_SPK(x) (1 << (((x) & 3) * 2 + 1)) /* FIFOx SHORT PACKET */
+#define GIMR1_FIFO_RX(x) (GIMR1_FIFO_OUT(x) | GIMR1_FIFO_SPK(x))
+#define GIMR1_MASK 0xf00ff
+
+/* Group Interrupt Mask(Disable) Register 2 (Device) */
+#define GIMR2_WAKEUP (1 << 10) /* Device waked up */
+#define GIMR2_IDLE (1 << 9) /* Device idle */
+#define GIMR2_DMAERR (1 << 8) /* DMA error */
+#define GIMR2_DMAFIN (1 << 7) /* DMA finished */
+#define GIMR2_ZLPRX (1 << 6) /* Zero-Length-Packet Rx Interrupt */
+#define GIMR2_ZLPTX (1 << 5) /* Zero-Length-Packet Tx Interrupt */
+#define GIMR2_ISOCABT (1 << 4) /* ISOC Abort Interrupt */
+#define GIMR2_ISOCERR (1 << 3) /* ISOC Error Interrupt */
+#define GIMR2_RESUME (1 << 2) /* Resume state change Interrupt */
+#define GIMR2_SUSPEND (1 << 1) /* Suspend state change Interrupt */
+#define GIMR2_RESET (1 << 0) /* Reset Interrupt */
+#define GIMR2_MASK 0x7ff
+
+/* Group Interrupt Status Register */
+#define GISR_GRP2 (1 << 2) /* Interrupt group 2 */
+#define GISR_GRP1 (1 << 1) /* Interrupt group 1 */
+#define GISR_GRP0 (1 << 0) /* Interrupt group 0 */
+
+/* Group Interrupt Status Register 0 (CX) */
+#define GISR0_CXABORT (1 << 5) /* CX command abort interrupt */
+#define GISR0_CXERR (1 << 4) /* CX command error interrupt */
+#define GISR0_CXEND (1 << 3) /* CX command end interrupt */
+#define GISR0_CXOUT (1 << 2) /* EP0-OUT packet interrupt */
+#define GISR0_CXIN (1 << 1) /* EP0-IN packet interrupt */
+#define GISR0_CXSETUP (1 << 0) /* EP0-SETUP packet interrupt */
+
+/* Group Interrupt Status Register 1 (FIFO) */
+#define GISR1_IN_FIFO(x) (1 << (((x) & 0x03) + 16)) /* FIFOx IN */
+#define GISR1_OUT_FIFO(x) (1 << (((x) & 0x03) * 2)) /* FIFOx OUT */
+#define GISR1_SPK_FIFO(x) (1 << (((x) & 0x03) * 2 + 1)) /* FIFOx SPK */
+#define GISR1_RX_FIFO(x) (3 << (((x) & 0x03) * 2)) /* FIFOx OUT/SPK */
+
+/* Group Interrupt Status Register 2 (Device) */
+#define GISR2_WAKEUP (1 << 10) /* Device waked up */
+#define GISR2_IDLE (1 << 9) /* Device idle */
+#define GISR2_DMAERR (1 << 8) /* DMA error */
+#define GISR2_DMAFIN (1 << 7) /* DMA finished */
+#define GISR2_ZLPRX (1 << 6) /* Zero-Length-Packet Rx Interrupt */
+#define GISR2_ZLPTX (1 << 5) /* Zero-Length-Packet Tx Interrupt */
+#define GISR2_ISOCABT (1 << 4) /* ISOC Abort Interrupt */
+#define GISR2_ISOCERR (1 << 3) /* ISOC Error Interrupt */
+#define GISR2_RESUME (1 << 2) /* Resume state change Interrupt */
+#define GISR2_SUSPEND (1 << 1) /* Suspend state change Interrupt */
+#define GISR2_RESET (1 << 0) /* Reset Interrupt */
+
+/* Receive Zero-Length-Packet Register */
+#define RXZLP_EP(x) (1 << ((x) - 1)) /* EPx ZLP rx interrupt */
+
+/* Transfer Zero-Length-Packet Register */
+#define TXZLP_EP(x) (1 << ((x) - 1)) /* EPx ZLP tx interrupt */
+
+/* ISOC Error/Abort Status Register */
+#define ISOEASR_EP(x) (0x10001 << ((x) - 1)) /* EPx ISOC Error/Abort */
+
+/* IN Endpoint Register */
+#define IEP_SENDZLP (1 << 15) /* Send Zero-Length-Packet */
+#define IEP_TNRHB(x) (((x) & 0x03) << 13) \
+ /* Transaction Number for High-Bandwidth EP(ISOC) */
+#define IEP_RESET (1 << 12) /* Reset Toggle Sequence */
+#define IEP_STALL (1 << 11) /* Stall */
+#define IEP_MAXPS(x) ((x) & 0x7ff) /* Max. packet size */
+
+/* OUT Endpoint Register */
+#define OEP_RESET (1 << 12) /* Reset Toggle Sequence */
+#define OEP_STALL (1 << 11) /* Stall */
+#define OEP_MAXPS(x) ((x) & 0x7ff) /* Max. packet size */
+
+/* Endpoint Map Register (EP1 ~ EP4) */
+#define EPMAP14_SET_IN(ep, fifo) \
+ ((fifo) & 3) << (((ep) - 1) << 3 + 0)
+#define EPMAP14_SET_OUT(ep, fifo) \
+ ((fifo) & 3) << (((ep) - 1) << 3 + 4)
+#define EPMAP14_SET(ep, in, out) \
+ do { \
+ EPMAP14_SET_IN(ep, in); \
+ EPMAP14_SET_OUT(ep, out); \
+ } while (0)
+
+#define EPMAP14_DEFAULT 0x33221100 /* EP1->FIFO0, EP2->FIFO1... */
+
+/* Endpoint Map Register (EP5 ~ EP8) */
+#define EPMAP58_SET_IN(ep, fifo) \
+ ((fifo) & 3) << (((ep) - 5) << 3 + 0)
+#define EPMAP58_SET_OUT(ep, fifo) \
+ ((fifo) & 3) << (((ep) - 5) << 3 + 4)
+#define EPMAP58_SET(ep, in, out) \
+ do { \
+ EPMAP58_SET_IN(ep, in); \
+ EPMAP58_SET_OUT(ep, out); \
+ } while (0)
+
+#define EPMAP58_DEFAULT 0x00000000 /* All EPx->FIFO0 */
+
+/* FIFO Map Register */
+#define FIFOMAP_BIDIR (2 << 4)
+#define FIFOMAP_IN (1 << 4)
+#define FIFOMAP_OUT (0 << 4)
+#define FIFOMAP_DIR_MASK 0x30
+#define FIFOMAP_EP(x) ((x) & 0x0f)
+#define FIFOMAP_EP_MASK 0x0f
+#define FIFOMAP_CFG_MASK 0x3f
+#define FIFOMAP_DEFAULT 0x04030201 /* FIFO0->EP1, FIFO1->EP2... */
+#define FIFOMAP(fifo, cfg) (((cfg) & 0x3f) << (((fifo) & 3) << 3))
+
+/* FIFO Configuration Register */
+#define FIFOCFG_EN (1 << 5)
+#define FIFOCFG_BLKSZ_1024 (1 << 4)
+#define FIFOCFG_BLKSZ_512 (0 << 4)
+#define FIFOCFG_3BLK (2 << 2)
+#define FIFOCFG_2BLK (1 << 2)
+#define FIFOCFG_1BLK (0 << 2)
+#define FIFOCFG_NBLK_MASK 3
+#define FIFOCFG_NBLK_SHIFT 2
+#define FIFOCFG_INTR (3 << 0)
+#define FIFOCFG_BULK (2 << 0)
+#define FIFOCFG_ISOC (1 << 0)
+#define FIFOCFG_RSVD (0 << 0) /* Reserved */
+#define FIFOCFG_TYPE_MASK 3
+#define FIFOCFG_TYPE_SHIFT 0
+#define FIFOCFG_CFG_MASK 0x3f
+#define FIFOCFG(fifo, cfg) (((cfg) & 0x3f) << (((fifo) & 3) << 3))
+
+/* FIFO Control Status Register */
+#define FIFOCSR_RESET (1 << 12) /* FIFO Reset */
+#define FIFOCSR_BYTES(x) ((x) & 0x7ff) /* Length(bytes) for OUT-EP/FIFO */
+
+/* DMA Target FIFO Register */
+#define DMAFIFO_CX (1 << 4) /* DMA FIFO = CX FIFO */
+#define DMAFIFO_FIFO(x) (1 << ((x) & 0x3)) /* DMA FIFO = FIFOx */
+
+/* DMA Control Register */
+#define DMACTRL_LEN(x) (((x) & 0x1ffff) << 8) /* DMA length (Bytes) */
+#define DMACTRL_LEN_SHIFT 8
+#define DMACTRL_CLRFF (1 << 4) /* Clear FIFO upon DMA abort */
+#define DMACTRL_ABORT (1 << 3) /* DMA abort */
+#define DMACTRL_IO2IO (1 << 2) /* IO to IO */
+#define DMACTRL_FIFO2MEM (0 << 1) /* FIFO to Memory */
+#define DMACTRL_MEM2FIFO (1 << 1) /* Memory to FIFO */
+#define DMACTRL_START (1 << 0) /* DMA start */
+
+#endif
projects / platform / kernel / u-boot.git / commitdiff