[RS6000] reload_vsx_from_gprsf splitter

This is PR68973 part 2, caused by the reload_vsx_from_gprsf splitter
emitting an invalid move.  The patch also fixes uses of TFmode, which
cannot now be assumed to be IBM double-double.

	PR target/68973
	* config/rs6000/rs6000.md (reload_vsx_from_gprsf): Rewrite splitter.
	(p8_mtvsrd_df, p8_mtvsrd_sf): New.
	(p8_mtvsrd_1, p8_mtvsrd_2): Delete.
	(p8_mtvsrwz): New.
	(p8_mtvsrwz_1, p8_mtvsrwz_2): Delete.
	(p8_xxpermdi_<mode>): Take two DF inputs rather than one TF.
	(p8_fmrgow_<mode>): Likewise.
	(reload_vsx_from_gpr<mode>): Make clobber IF.  Adjust for above
	changes.
	(reload_fpr_from_gpr<mode>): Similarly. Use "d" for op0 constraint.
	(reload_vsx_from_gprsf): Use p8_mtvsrd_sf rather than attempting
	to use movdi_internal64.  Remove op0_di.
	* config/rs6000/vsx.md (vsx_xscvspdpn_directmove): Make op1 SFmode.

git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@233438 138bc75d-0d04-0410-961f-82ee72b054a4

diff --git a/gcc/ChangeLog b/gcc/ChangeLog
index 54e7042..bb8d543 100644 (file)
--- a/gcc/ChangeLog
+++ b/gcc/ChangeLog
@@ -1,5 +1,22 @@
+2016-02-16  Alan Modra  <amodra@gmail.com>
+
+       PR target/68973
+       * config/rs6000/rs6000.md (reload_vsx_from_gprsf): Rewrite splitter.
+       (p8_mtvsrd_df, p8_mtvsrd_sf): New.
+       (p8_mtvsrd_1, p8_mtvsrd_2): Delete.
+       (p8_mtvsrwz): New.
+       (p8_mtvsrwz_1, p8_mtvsrwz_2): Delete.
+       (p8_xxpermdi_<mode>): Take two DF inputs rather than one TF.
+       (p8_fmrgow_<mode>): Likewise.
+       (reload_vsx_from_gpr<mode>): Make clobber IF.  Adjust for above
+       changes.
+       (reload_fpr_from_gpr<mode>): Similarly. Use "d" for op0 constraint.
+       (reload_vsx_from_gprsf): Use p8_mtvsrd_sf rather than attempting
+       to use movdi_internal64.  Remove op0_di.
+       * config/rs6000/vsx.md (vsx_xscvspdpn_directmove): Make op1 SFmode.
+
 2016-02-15  Evandro Menezes  <e.menezes@samsung.com>
-    
+
        Add support for the FCCMP insn types
 
        * config/aarch64/aarch64.md (fccmp): Change insn type.

diff --git a/gcc/config/rs6000/rs6000.md b/gcc/config/rs6000/rs6000.md
index 6786342..952617c 100644 (file)
--- a/gcc/config/rs6000/rs6000.md
+++ b/gcc/config/rs6000/rs6000.md
@@ -7488,41 +7488,31 @@
 ;; value, since it is allocated in reload and not all of the flow information
 ;; is setup for it.  We have two patterns to do the two moves between gprs and
 ;; fprs.  There isn't a dependancy between the two, but we could potentially
-;; schedule other instructions between the two instructions.  TFmode is
-;; currently limited to traditional FPR registers.  If/when this is changed, we
-;; will need to revist %L to make sure it works with VSX registers, or add an
-;; %x version of %L.
+;; schedule other instructions between the two instructions.
 
 (define_insn "p8_fmrgow_<mode>"
   [(set (match_operand:FMOVE64X 0 "register_operand" "=d")
-       (unspec:FMOVE64X [(match_operand:TF 1 "register_operand" "d")]
+       (unspec:FMOVE64X [
+               (match_operand:DF 1 "register_operand" "d")
+               (match_operand:DF 2 "register_operand" "d")]
                         UNSPEC_P8V_FMRGOW))]
   "!TARGET_POWERPC64 && TARGET_DIRECT_MOVE"
-  "fmrgow %0,%1,%L1"
+  "fmrgow %0,%1,%2"
   [(set_attr "type" "vecperm")])
 
-(define_insn "p8_mtvsrwz_1"
-  [(set (match_operand:TF 0 "register_operand" "=d")
-       (unspec:TF [(match_operand:SI 1 "register_operand" "r")]
+(define_insn "p8_mtvsrwz"
+  [(set (match_operand:DF 0 "register_operand" "=d")
+       (unspec:DF [(match_operand:SI 1 "register_operand" "r")]
                   UNSPEC_P8V_MTVSRWZ))]
   "!TARGET_POWERPC64 && TARGET_DIRECT_MOVE"
   "mtvsrwz %x0,%1"
   [(set_attr "type" "mftgpr")])
 
-(define_insn "p8_mtvsrwz_2"
-  [(set (match_operand:TF 0 "register_operand" "+d")
-       (unspec:TF [(match_dup 0)
-                   (match_operand:SI 1 "register_operand" "r")]
-                  UNSPEC_P8V_MTVSRWZ))]
-  "!TARGET_POWERPC64 && TARGET_DIRECT_MOVE"
-  "mtvsrwz %L0,%1"
-  [(set_attr "type" "mftgpr")])
-
 (define_insn_and_split "reload_fpr_from_gpr<mode>"
-  [(set (match_operand:FMOVE64X 0 "register_operand" "=ws")
+  [(set (match_operand:FMOVE64X 0 "register_operand" "=d")
        (unspec:FMOVE64X [(match_operand:FMOVE64X 1 "register_operand" "r")]
                         UNSPEC_P8V_RELOAD_FROM_GPR))
-   (clobber (match_operand:TF 2 "register_operand" "=d"))]
+   (clobber (match_operand:IF 2 "register_operand" "=d"))]
   "!TARGET_POWERPC64 && TARGET_DIRECT_MOVE"
   "#"
   "&& reload_completed"
@@ -7530,42 +7520,36 @@
 {
   rtx dest = operands[0];
   rtx src = operands[1];
-  rtx tmp = operands[2];
+  rtx tmp_hi = simplify_gen_subreg (DFmode, operands[2], IFmode, 0);
+  rtx tmp_lo = simplify_gen_subreg (DFmode, operands[2], IFmode, 8);
   rtx gpr_hi_reg = gen_highpart (SImode, src);
   rtx gpr_lo_reg = gen_lowpart (SImode, src);
 
-  emit_insn (gen_p8_mtvsrwz_1 (tmp, gpr_hi_reg));
-  emit_insn (gen_p8_mtvsrwz_2 (tmp, gpr_lo_reg));
-  emit_insn (gen_p8_fmrgow_<mode> (dest, tmp));
+  emit_insn (gen_p8_mtvsrwz (tmp_hi, gpr_hi_reg));
+  emit_insn (gen_p8_mtvsrwz (tmp_lo, gpr_lo_reg));
+  emit_insn (gen_p8_fmrgow_<mode> (dest, tmp_hi, tmp_lo));
   DONE;
 }
   [(set_attr "length" "12")
    (set_attr "type" "three")])
 
 ;; Move 128 bit values from GPRs to VSX registers in 64-bit mode
-(define_insn "p8_mtvsrd_1"
-  [(set (match_operand:TF 0 "register_operand" "=ws")
-       (unspec:TF [(match_operand:DI 1 "register_operand" "r")]
-                  UNSPEC_P8V_MTVSRD))]
-  "TARGET_POWERPC64 && TARGET_DIRECT_MOVE"
-  "mtvsrd %0,%1"
-  [(set_attr "type" "mftgpr")])
-
-(define_insn "p8_mtvsrd_2"
-  [(set (match_operand:TF 0 "register_operand" "+ws")
-       (unspec:TF [(match_dup 0)
-                   (match_operand:DI 1 "register_operand" "r")]
+(define_insn "p8_mtvsrd_df"
+  [(set (match_operand:DF 0 "register_operand" "=wa")
+       (unspec:DF [(match_operand:DI 1 "register_operand" "r")]
                   UNSPEC_P8V_MTVSRD))]
   "TARGET_POWERPC64 && TARGET_DIRECT_MOVE"
-  "mtvsrd %L0,%1"
+  "mtvsrd %x0,%1"
   [(set_attr "type" "mftgpr")])
 
 (define_insn "p8_xxpermdi_<mode>"
   [(set (match_operand:FMOVE128_GPR 0 "register_operand" "=wa")
-       (unspec:FMOVE128_GPR [(match_operand:TF 1 "register_operand" "ws")]
-                            UNSPEC_P8V_XXPERMDI))]
+       (unspec:FMOVE128_GPR [
+               (match_operand:DF 1 "register_operand" "wa")
+               (match_operand:DF 2 "register_operand" "wa")]
+               UNSPEC_P8V_XXPERMDI))]
   "TARGET_POWERPC64 && TARGET_DIRECT_MOVE"
-  "xxpermdi %x0,%1,%L1,0"
+  "xxpermdi %x0,%x1,%x2,0"
   [(set_attr "type" "vecperm")])
 
 (define_insn_and_split "reload_vsx_from_gpr<mode>"
@@ -7573,7 +7557,7 @@
        (unspec:FMOVE128_GPR
         [(match_operand:FMOVE128_GPR 1 "register_operand" "r")]
         UNSPEC_P8V_RELOAD_FROM_GPR))
-   (clobber (match_operand:TF 2 "register_operand" "=ws"))]
+   (clobber (match_operand:IF 2 "register_operand" "=wa"))]
   "TARGET_POWERPC64 && TARGET_DIRECT_MOVE"
   "#"
   "&& reload_completed"
@@ -7581,13 +7565,17 @@
 {
   rtx dest = operands[0];
   rtx src = operands[1];
-  rtx tmp = operands[2];
+  /* You might think that we could use op0 as one temp and a DF clobber
+     as op2, but you'd be wrong.  Secondary reload move patterns don't
+     check for overlap of the clobber and the destination.  */
+  rtx tmp_hi = simplify_gen_subreg (DFmode, operands[2], IFmode, 0);
+  rtx tmp_lo = simplify_gen_subreg (DFmode, operands[2], IFmode, 8);
   rtx gpr_hi_reg = gen_highpart (DImode, src);
   rtx gpr_lo_reg = gen_lowpart (DImode, src);
 
-  emit_insn (gen_p8_mtvsrd_1 (tmp, gpr_hi_reg));
-  emit_insn (gen_p8_mtvsrd_2 (tmp, gpr_lo_reg));
-  emit_insn (gen_p8_xxpermdi_<mode> (dest, tmp));
+  emit_insn (gen_p8_mtvsrd_df (tmp_hi, gpr_hi_reg));
+  emit_insn (gen_p8_mtvsrd_df (tmp_lo, gpr_lo_reg));
+  emit_insn (gen_p8_xxpermdi_<mode> (dest, tmp_hi, tmp_lo));
   DONE;
 }
   [(set_attr "length" "12")
@@ -7608,6 +7596,13 @@
 ;; Move SFmode to a VSX from a GPR register.  Because scalar floating point
 ;; type is stored internally as double precision in the VSX registers, we have
 ;; to convert it from the vector format.
+(define_insn "p8_mtvsrd_sf"
+  [(set (match_operand:SF 0 "register_operand" "=wa")
+       (unspec:SF [(match_operand:DI 1 "register_operand" "r")]
+                  UNSPEC_P8V_MTVSRD))]
+  "TARGET_POWERPC64 && TARGET_DIRECT_MOVE"
+  "mtvsrd %x0,%1"
+  [(set_attr "type" "mftgpr")])
 
 (define_insn_and_split "reload_vsx_from_gprsf"
   [(set (match_operand:SF 0 "register_operand" "=wa")
@@ -7622,16 +7617,12 @@
   rtx op0 = operands[0];
   rtx op1 = operands[1];
   rtx op2 = operands[2];
-  /* Also use the destination register to hold the unconverted DImode value.
-     This is conceptually a separate value from OP0, so we use gen_rtx_REG
-     rather than simplify_gen_subreg.  */
-  rtx op0_di = gen_rtx_REG (DImode, REGNO (op0));
   rtx op1_di = simplify_gen_subreg (DImode, op1, SFmode, 0);
 
   /* Move SF value to upper 32-bits for xscvspdpn.  */
   emit_insn (gen_ashldi3 (op2, op1_di, GEN_INT (32)));
-  emit_move_insn (op0_di, op2);
-  emit_insn (gen_vsx_xscvspdpn_directmove (op0, op0_di));
+  emit_insn (gen_p8_mtvsrd_sf (op0, op2));
+  emit_insn (gen_vsx_xscvspdpn_directmove (op0, op0));
   DONE;
 }
   [(set_attr "length" "8")

diff --git a/gcc/config/rs6000/vsx.md b/gcc/config/rs6000/vsx.md
index 997ff31..45af233 100644 (file)
--- a/gcc/config/rs6000/vsx.md
+++ b/gcc/config/rs6000/vsx.md
@@ -1521,7 +1521,7 @@
 ;; Used by direct move to move a SFmode value from GPR to VSX register
 (define_insn "vsx_xscvspdpn_directmove"
   [(set (match_operand:SF 0 "vsx_register_operand" "=wa")
-       (unspec:SF [(match_operand:DI 1 "vsx_register_operand" "wa")]
+       (unspec:SF [(match_operand:SF 1 "vsx_register_operand" "wa")]
                   UNSPEC_VSX_CVSPDPN))]
   "TARGET_XSCVSPDPN"
   "xscvspdpn %x0,%x1"