ARM: imx: add cpu idle support for i.MX6SLL
authorAnson Huang <Anson.Huang@nxp.com>
Sun, 3 Jun 2018 02:33:45 +0000 (10:33 +0800)
committerShawn Guo <shawnguo@kernel.org>
Tue, 19 Jun 2018 01:07:16 +0000 (09:07 +0800)
i.MX6SLL supports cpu idle with ARM power gated,
it can reuse i.MX6SX's cpu idle driver to support
below 3 states of cpu idle:

state0: WFI;
state1: WAIT mode with ARM power on;
state2: WAIT mode with ARM power off.

L2_PGE in GPC_CNTR needs to be cleared to support
state2 cpu idle.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
arch/arm/mach-imx/Makefile
arch/arm/mach-imx/cpuidle-imx6sx.c
arch/arm/mach-imx/mach-imx6sl.c

index 2327e3e..127fdf3 100644 (file)
@@ -25,8 +25,8 @@ obj-$(CONFIG_MXC_DEBUG_BOARD) += 3ds_debugboard.o
 ifeq ($(CONFIG_CPU_IDLE),y)
 obj-$(CONFIG_SOC_IMX5) += cpuidle-imx5.o
 obj-$(CONFIG_SOC_IMX6Q) += cpuidle-imx6q.o
-obj-$(CONFIG_SOC_IMX6SL) += cpuidle-imx6sl.o
-obj-$(CONFIG_SOC_IMX6SLL) += cpuidle-imx6sl.o
+obj-$(CONFIG_SOC_IMX6SL) += cpuidle-imx6sl.o cpuidle-imx6sx.o
+obj-$(CONFIG_SOC_IMX6SLL) += cpuidle-imx6sl.o cpuidle-imx6sx.o
 obj-$(CONFIG_SOC_IMX6SX) += cpuidle-imx6sx.o
 obj-$(CONFIG_SOC_IMX6UL) += cpuidle-imx6sx.o
 endif
index d0f14b7..243a108 100644 (file)
@@ -103,6 +103,7 @@ int __init imx6sx_cpuidle_init(void)
 {
        imx6_set_int_mem_clk_lpm(true);
        imx6_enable_rbc(false);
+       imx_gpc_set_l2_mem_power_in_lpm(false);
        /*
         * set ARM power up/down timing to the fastest,
         * sw2iso and sw can be set to one 32K cycle = 31us
index c7a1ef1..183540e 100644 (file)
@@ -42,7 +42,10 @@ static void __init imx6sl_init_late(void)
        if (IS_ENABLED(CONFIG_ARM_IMX6Q_CPUFREQ))
                platform_device_register_simple("imx6q-cpufreq", -1, NULL, 0);
 
-       imx6sl_cpuidle_init();
+       if (cpu_is_imx6sl())
+               imx6sl_cpuidle_init();
+       else
+               imx6sx_cpuidle_init();
 }
 
 static void __init imx6sl_init_machine(void)