/* HELPER: Get ModeID */
/*********************************************/
-#ifndef SIS_XORG_XF86
static
-#endif
unsigned short
SiS_GetModeID(int VGAEngine, unsigned int VBFlags, int HDisplay, int VDisplay,
int Depth, bool FSTN, int LCDwidth, int LCDheight)
SiS_Pr->SiS_SelectCRT2Rate = 0;
SiS_Pr->SiS_SetFlag &= (~ProgrammingCRT2);
-#ifdef SIS_XORG_XF86
- xf86DrvMsgVerb(0, X_PROBED, 4, "(init: VBType=0x%04x, VBInfo=0x%04x)\n",
- SiS_Pr->SiS_VBType, SiS_Pr->SiS_VBInfo);
-#endif
-
if(SiS_Pr->SiS_VBInfo & SetSimuScanMode) {
if(SiS_Pr->SiS_VBInfo & SetInSlaveMode) {
SiS_Pr->SiS_SetFlag |= ProgrammingCRT2;
}
/*********************************************/
-/* X.org/XFree86: SET SCREEN PITCH */
-/*********************************************/
-
-#ifdef SIS_XORG_XF86
-static void
-SiS_SetPitchCRT1(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn)
-{
- SISPtr pSiS = SISPTR(pScrn);
- unsigned short HDisplay = pSiS->scrnPitch >> 3;
-
- SiS_SetReg(SiS_Pr->SiS_P3d4,0x13,(HDisplay & 0xFF));
- SiS_SetRegANDOR(SiS_Pr->SiS_P3c4,0x0E,0xF0,(HDisplay >> 8));
-}
-
-static void
-SiS_SetPitchCRT2(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn)
-{
- SISPtr pSiS = SISPTR(pScrn);
- unsigned short HDisplay = pSiS->scrnPitch2 >> 3;
-
- /* Unlock CRT2 */
- if(pSiS->VGAEngine == SIS_315_VGA)
- SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x2F, 0x01);
- else
- SiS_SetRegOR(SiS_Pr->SiS_Part1Port,0x24, 0x01);
-
- SiS_SetReg(SiS_Pr->SiS_Part1Port,0x07,(HDisplay & 0xFF));
- SiS_SetRegANDOR(SiS_Pr->SiS_Part1Port,0x09,0xF0,(HDisplay >> 8));
-}
-
-static void
-SiS_SetPitch(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn)
-{
- SISPtr pSiS = SISPTR(pScrn);
- bool isslavemode = false;
-
- if( (pSiS->VBFlags2 & VB2_VIDEOBRIDGE) &&
- ( ((pSiS->VGAEngine == SIS_300_VGA) &&
- (SiS_GetReg(SiS_Pr->SiS_Part1Port,0x00) & 0xa0) == 0x20) ||
- ((pSiS->VGAEngine == SIS_315_VGA) &&
- (SiS_GetReg(SiS_Pr->SiS_Part1Port,0x00) & 0x50) == 0x10) ) ) {
- isslavemode = true;
- }
-
- /* We need to set pitch for CRT1 if bridge is in slave mode, too */
- if((pSiS->VBFlags & DISPTYPE_DISP1) || (isslavemode)) {
- SiS_SetPitchCRT1(SiS_Pr, pScrn);
- }
- /* We must not set the pitch for CRT2 if bridge is in slave mode */
- if((pSiS->VBFlags & DISPTYPE_DISP2) && (!isslavemode)) {
- SiS_SetPitchCRT2(SiS_Pr, pScrn);
- }
-}
-#endif
-
-/*********************************************/
/* SiSSetMode() */
/*********************************************/
-#ifdef SIS_XORG_XF86
-/* We need pScrn for setting the pitch correctly */
-bool
-SiSSetMode(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn, unsigned short ModeNo, bool dosetpitch)
-#else
bool
SiSSetMode(struct SiS_Private *SiS_Pr, unsigned short ModeNo)
-#endif
{
SISIOADDRESS BaseAddr = SiS_Pr->IOAddress;
unsigned short RealModeNo, ModeIdIndex;
SiS_GetSysFlags(SiS_Pr);
SiS_Pr->SiS_VGAINFO = 0x11;
-#if defined(SIS_XORG_XF86) && (defined(i386) || defined(__i386) || defined(__i386__) || defined(__AMD64__) || defined(__amd64__) || defined(__x86_64__))
- if(pScrn) SiS_Pr->SiS_VGAINFO = SiS_GetSetBIOSScratch(pScrn, 0x489, 0xff);
-#endif
#ifdef SIS_LINUX_KERNEL
KeepLockReg = SiS_GetReg(SiS_Pr->SiS_P3c4,0x05);
}
}
-#ifdef SIS_XORG_XF86
- if(pScrn) {
- /* SetPitch: Adapt to virtual size & position */
- if((ModeNo > 0x13) && (dosetpitch)) {
- SiS_SetPitch(SiS_Pr, pScrn);
- }
-
- /* Backup/Set ModeNo in BIOS scratch area */
- SiS_GetSetModeID(pScrn, ModeNo);
- }
-#endif
-
SiS_CloseCRTC(SiS_Pr);
SiS_Handle760(SiS_Pr);
return true;
}
-/*********************************************/
-/* X.org/XFree86: SiSBIOSSetMode() */
-/* for non-Dual-Head mode */
-/*********************************************/
-
-#ifdef SIS_XORG_XF86
-bool
-SiSBIOSSetMode(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn,
- DisplayModePtr mode, bool IsCustom)
-{
- SISPtr pSiS = SISPTR(pScrn);
- unsigned short ModeNo = 0;
-
- SiS_Pr->UseCustomMode = false;
-
- if((IsCustom) && (SiS_CheckBuildCustomMode(pScrn, mode, pSiS->VBFlags))) {
-
- xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3, "Setting custom mode %dx%d\n",
- SiS_Pr->CHDisplay,
- (mode->Flags & V_INTERLACE ? SiS_Pr->CVDisplay * 2 :
- (mode->Flags & V_DBLSCAN ? SiS_Pr->CVDisplay / 2 :
- SiS_Pr->CVDisplay)));
-
- } else {
-
- /* Don't need vbflags here; checks done earlier */
- ModeNo = SiS_GetModeNumber(pScrn, mode, pSiS->VBFlags);
- if(!ModeNo) return false;
-
- xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3, "Setting standard mode 0x%x\n", ModeNo);
-
- }
-
- return(SiSSetMode(SiS_Pr, pScrn, ModeNo, true));
-}
-
-/*********************************************/
-/* X.org/XFree86: SiSBIOSSetModeCRT2() */
-/* for Dual-Head modes */
-/*********************************************/
-
-bool
-SiSBIOSSetModeCRT2(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn,
- DisplayModePtr mode, bool IsCustom)
-{
- SISIOADDRESS BaseAddr = SiS_Pr->IOAddress;
- SISPtr pSiS = SISPTR(pScrn);
-#ifdef SISDUALHEAD
- SISEntPtr pSiSEnt = pSiS->entityPrivate;
-#endif
- unsigned short ModeIdIndex;
- unsigned short ModeNo = 0;
- unsigned char backupreg = 0;
-
- SiS_Pr->UseCustomMode = false;
-
- /* Remember: Custom modes for CRT2 are ONLY supported
- * -) on the 30x/B/C, and
- * -) if CRT2 is LCD or VGA, or CRT1 is LCDA
- */
-
- if((IsCustom) && (SiS_CheckBuildCustomMode(pScrn, mode, pSiS->VBFlags))) {
-
- ModeNo = 0xfe;
-
- } else {
-
- ModeNo = SiS_GetModeNumber(pScrn, mode, pSiS->VBFlags);
- if(!ModeNo) return false;
-
- }
-
- SiSRegInit(SiS_Pr, BaseAddr);
- SiSInitPtr(SiS_Pr);
- SiS_GetSysFlags(SiS_Pr);
-#if defined(i386) || defined(__i386) || defined(__i386__) || defined(__AMD64__) || defined(__amd64__) || defined(__x86_64__)
- SiS_Pr->SiS_VGAINFO = SiS_GetSetBIOSScratch(pScrn, 0x489, 0xff);
-#else
- SiS_Pr->SiS_VGAINFO = 0x11;
-#endif
-
- SiS_SetReg(SiS_Pr->SiS_P3c4,0x05,0x86);
-
- SiSInitPCIetc(SiS_Pr);
- SiSSetLVDSetc(SiS_Pr);
- SiSDetermineROMUsage(SiS_Pr);
-
- /* Save mode info so we can set it from within SetMode for CRT1 */
-#ifdef SISDUALHEAD
- if(pSiS->DualHeadMode) {
- pSiSEnt->CRT2ModeNo = ModeNo;
- pSiSEnt->CRT2DMode = mode;
- pSiSEnt->CRT2IsCustom = IsCustom;
- pSiSEnt->CRT2CR30 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x30);
- pSiSEnt->CRT2CR31 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x31);
- pSiSEnt->CRT2CR35 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x35);
- pSiSEnt->CRT2CR38 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38);
-#if 0
- /* We can't set CRT2 mode before CRT1 mode is set - says who...? */
- if(pSiSEnt->CRT1ModeNo == -1) {
- xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3,
- "Setting CRT2 mode delayed until after setting CRT1 mode\n");
- return true;
- }
-#endif
- pSiSEnt->CRT2ModeSet = true;
- }
-#endif
-
- if(SiS_Pr->UseCustomMode) {
-
- unsigned short temptemp = SiS_Pr->CVDisplay;
-
- if(SiS_Pr->CModeFlag & DoubleScanMode) temptemp >>= 1;
- else if(SiS_Pr->CInfoFlag & InterlaceMode) temptemp <<= 1;
-
- xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3,
- "Setting custom mode %dx%d on CRT2\n",
- SiS_Pr->CHDisplay, temptemp);
-
- } else {
-
- xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3,
- "Setting standard mode 0x%x on CRT2\n", ModeNo);
-
- }
-
- SiS_UnLockCRT2(SiS_Pr);
-
- if(!SiS_Pr->UseCustomMode) {
- if(!(SiS_SearchModeID(SiS_Pr, &ModeNo, &ModeIdIndex))) return false;
- } else {
- ModeIdIndex = 0;
- }
-
- SiS_GetVBType(SiS_Pr);
-
- SiS_InitVB(SiS_Pr);
- if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {
- if(SiS_Pr->ChipType >= SIS_315H) {
- SiS_ResetVB(SiS_Pr);
- SiS_SetRegOR(SiS_Pr->SiS_P3c4,0x32,0x10);
- SiS_SetRegOR(SiS_Pr->SiS_Part2Port,0x00,0x0c);
- backupreg = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38);
- } else {
- backupreg = SiS_GetReg(SiS_Pr->SiS_P3d4,0x35);
- }
- }
-
- /* Get VB information (connectors, connected devices) */
- if(!SiS_Pr->UseCustomMode) {
- SiS_GetVBInfo(SiS_Pr, ModeNo, ModeIdIndex, 1);
- } else {
- /* If this is a custom mode, we don't check the modeflag for CRT2Mode */
- SiS_GetVBInfo(SiS_Pr, ModeNo, ModeIdIndex, 0);
- }
- SiS_SetYPbPr(SiS_Pr);
- SiS_SetTVMode(SiS_Pr, ModeNo, ModeIdIndex);
- SiS_GetLCDResInfo(SiS_Pr, ModeNo, ModeIdIndex);
- SiS_SetLowModeTest(SiS_Pr, ModeNo);
-
- SiS_ResetSegmentRegisters(SiS_Pr);
-
- /* Set mode on CRT2 */
- if( (SiS_Pr->SiS_VBType & VB_SISVB) ||
- (SiS_Pr->SiS_IF_DEF_LVDS == 1) ||
- (SiS_Pr->SiS_IF_DEF_CH70xx != 0) ||
- (SiS_Pr->SiS_IF_DEF_TRUMPION != 0) ) {
- SiS_SetCRT2Group(SiS_Pr, ModeNo);
- }
-
- SiS_StrangeStuff(SiS_Pr);
-
- SiS_DisplayOn(SiS_Pr);
- SiS_SetRegByte(SiS_Pr->SiS_P3c6,0xFF);
-
- if(SiS_Pr->ChipType >= SIS_315H) {
- if(SiS_Pr->SiS_IF_DEF_LVDS == 1) {
- if(!(SiS_IsDualEdge(SiS_Pr))) {
- SiS_SetRegAND(SiS_Pr->SiS_Part1Port,0x13,0xfb);
- }
- }
- }
-
- if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {
- if(SiS_Pr->ChipType >= SIS_315H) {
- if(!SiS_Pr->SiS_ROMNew) {
- if(SiS_IsVAMode(SiS_Pr)) {
- SiS_SetRegOR(SiS_Pr->SiS_P3d4,0x35,0x01);
- } else {
- SiS_SetRegAND(SiS_Pr->SiS_P3d4,0x35,0xFE);
- }
- }
-
- SiS_SetReg(SiS_Pr->SiS_P3d4,0x38,backupreg);
-
- if(SiS_GetReg(SiS_Pr->SiS_P3d4,0x30) & SetCRT2ToLCD) {
- SiS_SetRegAND(SiS_Pr->SiS_P3d4,0x38,0xfc);
- }
- } else if((SiS_Pr->ChipType == SIS_630) ||
- (SiS_Pr->ChipType == SIS_730)) {
- SiS_SetReg(SiS_Pr->SiS_P3d4,0x35,backupreg);
- }
- }
-
- /* SetPitch: Adapt to virtual size & position */
- SiS_SetPitchCRT2(SiS_Pr, pScrn);
-
- SiS_Handle760(SiS_Pr);
-
- return true;
-}
-
-/*********************************************/
-/* X.org/XFree86: SiSBIOSSetModeCRT1() */
-/* for Dual-Head modes */
-/*********************************************/
-
-bool
-SiSBIOSSetModeCRT1(struct SiS_Private *SiS_Pr, ScrnInfoPtr pScrn,
- DisplayModePtr mode, bool IsCustom)
-{
- SISIOADDRESS BaseAddr = SiS_Pr->IOAddress;
- SISPtr pSiS = SISPTR(pScrn);
- unsigned short ModeIdIndex, ModeNo = 0;
- unsigned char backupreg = 0;
-#ifdef SISDUALHEAD
- SISEntPtr pSiSEnt = pSiS->entityPrivate;
- unsigned char backupcr30, backupcr31, backupcr38, backupcr35, backupp40d=0;
- bool backupcustom;
-#endif
-
- SiS_Pr->UseCustomMode = false;
-
- if((IsCustom) && (SiS_CheckBuildCustomMode(pScrn, mode, pSiS->VBFlags))) {
-
- unsigned short temptemp = SiS_Pr->CVDisplay;
-
- if(SiS_Pr->CModeFlag & DoubleScanMode) temptemp >>= 1;
- else if(SiS_Pr->CInfoFlag & InterlaceMode) temptemp <<= 1;
-
- xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3,
- "Setting custom mode %dx%d on CRT1\n",
- SiS_Pr->CHDisplay, temptemp);
- ModeNo = 0xfe;
-
- } else {
-
- ModeNo = SiS_GetModeNumber(pScrn, mode, 0); /* don't give VBFlags */
- if(!ModeNo) return false;
-
- xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3,
- "Setting standard mode 0x%x on CRT1\n", ModeNo);
- }
-
- SiSInitPtr(SiS_Pr);
- SiSRegInit(SiS_Pr, BaseAddr);
- SiS_GetSysFlags(SiS_Pr);
-#if defined(i386) || defined(__i386) || defined(__i386__) || defined(__AMD64__) || defined(__amd64__) || defined(__x86_64__)
- SiS_Pr->SiS_VGAINFO = SiS_GetSetBIOSScratch(pScrn, 0x489, 0xff);
-#else
- SiS_Pr->SiS_VGAINFO = 0x11;
-#endif
-
- SiS_SetReg(SiS_Pr->SiS_P3c4,0x05,0x86);
-
- SiSInitPCIetc(SiS_Pr);
- SiSSetLVDSetc(SiS_Pr);
- SiSDetermineROMUsage(SiS_Pr);
-
- SiS_UnLockCRT2(SiS_Pr);
-
- if(!SiS_Pr->UseCustomMode) {
- if(!(SiS_SearchModeID(SiS_Pr, &ModeNo, &ModeIdIndex))) return false;
- } else {
- ModeIdIndex = 0;
- }
-
- /* Determine VBType */
- SiS_GetVBType(SiS_Pr);
-
- SiS_InitVB(SiS_Pr);
- if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {
- if(SiS_Pr->ChipType >= SIS_315H) {
- backupreg = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38);
- } else {
- backupreg = SiS_GetReg(SiS_Pr->SiS_P3d4,0x35);
- }
- }
-
- /* Get VB information (connectors, connected devices) */
- /* (We don't care if the current mode is a CRT2 mode) */
- SiS_GetVBInfo(SiS_Pr, ModeNo, ModeIdIndex, 0);
- SiS_SetYPbPr(SiS_Pr);
- SiS_SetTVMode(SiS_Pr, ModeNo, ModeIdIndex);
- SiS_GetLCDResInfo(SiS_Pr, ModeNo, ModeIdIndex);
- SiS_SetLowModeTest(SiS_Pr, ModeNo);
-
- SiS_OpenCRTC(SiS_Pr);
-
- /* Set mode on CRT1 */
- SiS_SetCRT1Group(SiS_Pr, ModeNo, ModeIdIndex);
- if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) {
- SiS_SetCRT2Group(SiS_Pr, ModeNo);
- }
-
- /* SetPitch: Adapt to virtual size & position */
- SiS_SetPitchCRT1(SiS_Pr, pScrn);
-
- SiS_HandleCRT1(SiS_Pr);
-
- SiS_StrangeStuff(SiS_Pr);
-
- SiS_CloseCRTC(SiS_Pr);
-
-#ifdef SISDUALHEAD
- if(pSiS->DualHeadMode) {
- pSiSEnt->CRT1ModeNo = ModeNo;
- pSiSEnt->CRT1DMode = mode;
- }
-#endif
-
- if(SiS_Pr->UseCustomMode) {
- SiS_Pr->CRT1UsesCustomMode = true;
- SiS_Pr->CSRClock_CRT1 = SiS_Pr->CSRClock;
- SiS_Pr->CModeFlag_CRT1 = SiS_Pr->CModeFlag;
- } else {
- SiS_Pr->CRT1UsesCustomMode = false;
- }
-
- /* Reset CRT2 if changing mode on CRT1 */
-#ifdef SISDUALHEAD
- if(pSiS->DualHeadMode) {
- if(pSiSEnt->CRT2ModeNo != -1) {
- xf86DrvMsgVerb(pScrn->scrnIndex, X_INFO, 3,
- "(Re-)Setting mode for CRT2\n");
- backupcustom = SiS_Pr->UseCustomMode;
- backupcr30 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x30);
- backupcr31 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x31);
- backupcr35 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x35);
- backupcr38 = SiS_GetReg(SiS_Pr->SiS_P3d4,0x38);
- if(SiS_Pr->SiS_VBType & VB_SISVB) {
- /* Backup LUT-enable */
- if(pSiSEnt->CRT2ModeSet) {
- backupp40d = SiS_GetReg(SiS_Pr->SiS_Part4Port,0x0d) & 0x08;
- }
- }
- if(SiS_Pr->SiS_VBInfo & SetCRT2ToLCDA) {
- SiS_SetReg(SiS_Pr->SiS_P3d4,0x30,pSiSEnt->CRT2CR30);
- SiS_SetReg(SiS_Pr->SiS_P3d4,0x31,pSiSEnt->CRT2CR31);
- SiS_SetReg(SiS_Pr->SiS_P3d4,0x35,pSiSEnt->CRT2CR35);
- SiS_SetReg(SiS_Pr->SiS_P3d4,0x38,pSiSEnt->CRT2CR38);
- }
-
- SiSBIOSSetModeCRT2(SiS_Pr, pSiSEnt->pScrn_1,
- pSiSEnt->CRT2DMode, pSiSEnt->CRT2IsCustom);
-
- SiS_SetReg(SiS_Pr->SiS_P3d4,0x30,backupcr30);
- SiS_SetReg(SiS_Pr->SiS_P3d4,0x31,backupcr31);
- SiS_SetReg(SiS_Pr->SiS_P3d4,0x35,backupcr35);
- SiS_SetReg(SiS_Pr->SiS_P3d4,0x38,backupcr38);
- if(SiS_Pr->SiS_VBType & VB_SISVB) {
- SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x0d, ~0x08, backupp40d);
- }
- SiS_Pr->UseCustomMode = backupcustom;
- }
- }
-#endif
-
- /* Warning: From here, the custom mode entries in SiS_Pr are
- * possibly overwritten
- */
-
- SiS_DisplayOn(SiS_Pr);
- SiS_SetRegByte(SiS_Pr->SiS_P3c6,0xFF);
-
- if(SiS_Pr->SiS_VBType & VB_SIS30xBLV) {
- if(SiS_Pr->ChipType >= SIS_315H) {
- SiS_SetReg(SiS_Pr->SiS_P3d4,0x38,backupreg);
- } else if((SiS_Pr->ChipType == SIS_630) ||
- (SiS_Pr->ChipType == SIS_730)) {
- SiS_SetReg(SiS_Pr->SiS_P3d4,0x35,backupreg);
- }
- }
-
- SiS_Handle760(SiS_Pr);
-
- /* Backup/Set ModeNo in BIOS scratch area */
- SiS_GetSetModeID(pScrn,ModeNo);
-
- return true;
-}
-#endif /* Linux_XF86 */
-
#ifndef GETBITSTR
#define BITMASK(h,l) (((unsigned)(1U << ((h)-(l)+1))-1)<<(l))
#define GENMASK(mask) BITMASK(1?mask,0?mask)
if(modeflag & DoubleScanMode) tempax |= 0x80;
SiS_SetRegANDOR(SiS_Pr->SiS_P3d4,0x09,0x5F,tempax);
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "%d %d %d %d %d %d %d %d (%d %d %d %d)\n",
- SiS_Pr->CHDisplay, SiS_Pr->CHSyncStart, SiS_Pr->CHSyncEnd, SiS_Pr->CHTotal,
- SiS_Pr->CVDisplay, SiS_Pr->CVSyncStart, SiS_Pr->CVSyncEnd, SiS_Pr->CVTotal,
- SiS_Pr->CHBlankStart, SiS_Pr->CHBlankEnd, SiS_Pr->CVBlankStart, SiS_Pr->CVBlankEnd);
- xf86DrvMsg(0, X_INFO, " {{0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,\n",
- SiS_Pr->CCRT1CRTC[0], SiS_Pr->CCRT1CRTC[1],
- SiS_Pr->CCRT1CRTC[2], SiS_Pr->CCRT1CRTC[3],
- SiS_Pr->CCRT1CRTC[4], SiS_Pr->CCRT1CRTC[5],
- SiS_Pr->CCRT1CRTC[6], SiS_Pr->CCRT1CRTC[7]);
- xf86DrvMsg(0, X_INFO, " 0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,\n",
- SiS_Pr->CCRT1CRTC[8], SiS_Pr->CCRT1CRTC[9],
- SiS_Pr->CCRT1CRTC[10], SiS_Pr->CCRT1CRTC[11],
- SiS_Pr->CCRT1CRTC[12], SiS_Pr->CCRT1CRTC[13],
- SiS_Pr->CCRT1CRTC[14], SiS_Pr->CCRT1CRTC[15]);
- xf86DrvMsg(0, X_INFO, " 0x%02x}},\n", SiS_Pr->CCRT1CRTC[16]);
-#endif
-#endif
}
void
SiS_Generic_ConvertCRData(struct SiS_Private *SiS_Pr, unsigned char *crdata,
int xres, int yres,
-#ifdef SIS_XORG_XF86
- DisplayModePtr current
-#endif
#ifdef SIS_LINUX_KERNEL
struct fb_var_screeninfo *var, bool writeres
#endif
D = B - F - C;
-#ifdef SIS_XORG_XF86
- current->HDisplay = (E * 8);
- current->HSyncStart = (E * 8) + (F * 8);
- current->HSyncEnd = (E * 8) + (F * 8) + (C * 8);
- current->HTotal = (E * 8) + (F * 8) + (C * 8) + (D * 8);
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO,
- "H: A %d B %d C %d D %d E %d F %d HT %d HDE %d HRS %d HBS %d HBE %d HRE %d\n",
- A, B, C, D, E, F, HT, HDE, HRS, HBS, HBE, HRE);
-#else
- (void)VBS; (void)HBS; (void)A;
-#endif
-#endif
#ifdef SIS_LINUX_KERNEL
if(writeres) var->xres = xres = E * 8;
var->left_margin = D * 8;
D = B - F - C;
-#ifdef SIS_XORG_XF86
- current->VDisplay = VDE + 1;
- current->VSyncStart = VRS + 1;
- current->VSyncEnd = ((VRS & ~0x1f) | VRE) + 1;
- if(VRE <= (VRS & 0x1f)) current->VSyncEnd += 32;
- current->VTotal = E + D + C + F;
-#if 0
- current->VDisplay = E;
- current->VSyncStart = E + D;
- current->VSyncEnd = E + D + C;
- current->VTotal = E + D + C + F;
-#endif
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO,
- "V: A %d B %d C %d D %d E %d F %d VT %d VDE %d VRS %d VBS %d VBE %d VRE %d\n",
- A, B, C, D, E, F, VT, VDE, VRS, VBS, VBE, VRE);
-#endif
-#endif
#ifdef SIS_LINUX_KERNEL
if(writeres) var->yres = yres = E;
var->upper_margin = D;
* a negative D. The CRT controller does not
* seem to like correcting HRE to 50)
*/
-#ifdef SIS_XORG_XF86
- current->HDisplay = 320;
- current->HSyncStart = 328;
- current->HSyncEnd = 376;
- current->HTotal = 400;
-#endif
#ifdef SIS_LINUX_KERNEL
var->left_margin = (400 - 376);
var->right_margin = (328 - 320);
SiS_Pr->SiS_VBInfo, SiS_Pr->SiS_SetFlag);
#endif
#endif
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_PROBED, "(init301: VBInfo=0x%04x, SetFlag=0x%04x)\n",
- SiS_Pr->SiS_VBInfo, SiS_Pr->SiS_SetFlag);
-#endif
-#endif
}
/*********************************************/
}
SiS_Pr->SiS_VBInfo &= ~SetPALTV;
-
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "(init301: TVMode %x, VBInfo %x)\n", SiS_Pr->SiS_TVMode, SiS_Pr->SiS_VBInfo);
-#endif
-#endif
}
/*********************************************/
unsigned char *ROMAddr;
unsigned short temp;
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "Paneldata driver: [%d %d] [H %d %d] [V %d %d] [C %d 0x%02x 0x%02x]\n",
- SiS_Pr->PanelHT, SiS_Pr->PanelVT,
- SiS_Pr->PanelHRS, SiS_Pr->PanelHRE,
- SiS_Pr->PanelVRS, SiS_Pr->PanelVRE,
- SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].CLOCK,
- SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].Part4_A,
- SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].Part4_B);
-#endif
-#endif
-
if((ROMAddr = GetLCDStructPtr661(SiS_Pr))) {
if((temp = SISGETROMW(6)) != SiS_Pr->PanelHT) {
SiS_Pr->SiS_NeedRomModeData = true;
SiS_Pr->SiS_VCLKData[VCLK_CUSTOM_315].SR2C =
SiS_Pr->SiS_VBVCLKData[VCLK_CUSTOM_315].Part4_B = ROMAddr[20];
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "Paneldata BIOS: [%d %d] [H %d %d] [V %d %d] [C %d 0x%02x 0x%02x]\n",
- SiS_Pr->PanelHT, SiS_Pr->PanelVT,
- SiS_Pr->PanelHRS, SiS_Pr->PanelHRE,
- SiS_Pr->PanelVRS, SiS_Pr->PanelVRE,
- SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].CLOCK,
- SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].Part4_A,
- SiS_Pr->SiS_VBVCLKData[SiS_Pr->PanelVCLKIdx315].Part4_B);
-#endif
-#endif
-
}
#endif
}
SiS_Pr->SiS_LCDInfo, SiS_Pr->SiS_LCDResInfo, SiS_Pr->SiS_LCDTypeInfo);
#endif
#endif
-#ifdef SIS_XORG_XF86
- xf86DrvMsgVerb(0, X_PROBED, 4,
- "(init301: LCDInfo=0x%04x LCDResInfo=0x%02x LCDTypeInfo=0x%02x SetFlag=0x%04x)\n",
- SiS_Pr->SiS_LCDInfo, SiS_Pr->SiS_LCDResInfo, SiS_Pr->SiS_LCDTypeInfo, SiS_Pr->SiS_SetFlag);
-#endif
}
/*********************************************/
}
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "VCLKIndex %d (0x%x)\n", VCLKIndex, VCLKIndex);
-#endif
-#endif
-
return VCLKIndex;
}
default : LCDPtr = SiS_Pr->SiS_ExtLCD1024x768Data; break;
}
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "GetCRT2Data: Index %d ResIndex %d\n", CRT2Index, ResIndex);
-#endif
-#endif
-
SiS_Pr->SiS_RVBHCMAX = (LCDPtr+ResIndex)->RVBHCMAX;
SiS_Pr->SiS_RVBHCFACT = (LCDPtr+ResIndex)->RVBHCFACT;
SiS_Pr->SiS_VGAHT = (LCDPtr+ResIndex)->VGAHT;
ret = 1;
}
SiS_SetRegANDOR(SiS_Pr->SiS_Part4Port,0x27,0x7f,temp);
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, 0, "Setting PWD %x\n", temp);
-#endif
-#endif
}
#endif
return ret;
temp = SiS_GetRegByte((SiS_Pr->SiS_P3ca+0x02));
SiS_SetReg(SiS_Pr->SiS_Part1Port,0x1b,temp); /* ? */
-
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "%d %d %d %d %d %d %d %d (%d %d %d %d)\n",
- SiS_Pr->CHDisplay, SiS_Pr->CHSyncStart, SiS_Pr->CHSyncEnd, SiS_Pr->CHTotal,
- SiS_Pr->CVDisplay, SiS_Pr->CVSyncStart, SiS_Pr->CVSyncEnd, SiS_Pr->CVTotal,
- SiS_Pr->CHBlankStart, SiS_Pr->CHBlankEnd, SiS_Pr->CVBlankStart, SiS_Pr->CVBlankEnd);
-
- xf86DrvMsg(0, X_INFO, " {{0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,\n",
- SiS_Pr->CCRT1CRTC[0], SiS_Pr->CCRT1CRTC[1],
- SiS_Pr->CCRT1CRTC[2], SiS_Pr->CCRT1CRTC[3],
- SiS_Pr->CCRT1CRTC[4], SiS_Pr->CCRT1CRTC[5],
- SiS_Pr->CCRT1CRTC[6], SiS_Pr->CCRT1CRTC[7]);
- xf86DrvMsg(0, X_INFO, " 0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,0x%02x,\n",
- SiS_Pr->CCRT1CRTC[8], SiS_Pr->CCRT1CRTC[9],
- SiS_Pr->CCRT1CRTC[10], SiS_Pr->CCRT1CRTC[11],
- SiS_Pr->CCRT1CRTC[12], SiS_Pr->CCRT1CRTC[13],
- SiS_Pr->CCRT1CRTC[14], SiS_Pr->CCRT1CRTC[15]);
- xf86DrvMsg(0, X_INFO, " 0x%02x}},\n", SiS_Pr->CCRT1CRTC[16]);
-#endif
-#endif
}
/* Setup panel link
/* Non-expanding: lcdvdes = tempcx = VT-1; lcdvdee = tempbx = VDE-1 */
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "lcdvdes 0x%x lcdvdee 0x%x\n", tempcx, tempbx);
-#endif
-#endif
-
SiS_SetReg(SiS_Pr->SiS_Part2Port,0x05,tempcx); /* lcdvdes */
SiS_SetReg(SiS_Pr->SiS_Part2Port,0x06,tempbx); /* lcdvdee */
tempbx = SiS_Pr->CVSyncStart;
}
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "lcdvrs 0x%x\n", tempbx);
-#endif
-#endif
-
SiS_SetReg(SiS_Pr->SiS_Part2Port,0x04,tempbx); /* lcdvrs */
temp = (tempbx >> 4) & 0xF0;
temp |= (SiS_Pr->CVSyncEnd & 0x0f);
}
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "lcdvre[3:0] 0x%x\n", (temp & 0x0f));
-#endif
-#endif
-
SiS_SetReg(SiS_Pr->SiS_Part2Port,0x01,temp);
#ifdef SIS300
tempax >>= 1;
}
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "lcdhdee 0x%x\n", tempbx);
-#endif
-#endif
-
tempbx += bridgeoffset;
SiS_SetReg(SiS_Pr->SiS_Part2Port,0x23,tempbx); /* lcdhdee */
tempbx += bridgeoffset;
}
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "lcdhrs 0x%x\n", tempbx);
-#endif
-#endif
-
SiS_SetReg(SiS_Pr->SiS_Part2Port,0x1C,tempbx); /* lcdhrs */
SiS_SetRegANDOR(SiS_Pr->SiS_Part2Port,0x1D,0x0F,((tempbx >> 4) & 0xf0));
tempbx += bridgeoffset;
}
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "lcdhre 0x%x\n", tempbx);
-#endif
-#endif
-
SiS_SetReg(SiS_Pr->SiS_Part2Port,0x21,tempbx); /* lcdhre */
SiS_SetGroup2_Tail(SiS_Pr, ModeNo);
SiS_GetLVDSDesData(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex);
}
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "(init301: LCDHDES 0x%03x LCDVDES 0x%03x)\n", SiS_Pr->SiS_LCDHDES, SiS_Pr->SiS_LCDVDES);
- xf86DrvMsg(0, X_INFO, "(init301: HDE 0x%03x VDE 0x%03x)\n", SiS_Pr->SiS_HDE, SiS_Pr->SiS_VDE);
- xf86DrvMsg(0, X_INFO, "(init301: VGAHDE 0x%03x VGAVDE 0x%03x)\n", SiS_Pr->SiS_VGAHDE, SiS_Pr->SiS_VGAVDE);
- xf86DrvMsg(0, X_INFO, "(init301: HT 0x%03x VT 0x%03x)\n", SiS_Pr->SiS_HT, SiS_Pr->SiS_VT);
- xf86DrvMsg(0, X_INFO, "(init301: VGAHT 0x%03x VGAVT 0x%03x)\n", SiS_Pr->SiS_VGAHT, SiS_Pr->SiS_VGAVT);
-#endif
-#endif
-
if(SiS_Pr->SiS_SetFlag & LowModeTests) {
SiS_SetGroup1(SiS_Pr, ModeNo, ModeIdIndex, RefreshRateTableIndex);
}
dataptr = SiS_SetTrumpBlockLoop(SiS_Pr, dataptr);
if(!dataptr) return false;
}
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "Trumpion block success\n");
-#endif
-#endif
return true;
}
#endif
}
/* Our own DDC functions */
-#ifndef SIS_XORG_XF86
static
-#endif
unsigned short
SiS_InitDDCRegs(struct SiS_Private *SiS_Pr, unsigned int VBFlags, int VGAEngine,
unsigned short adaptnum, unsigned short DDCdatatype, bool checkcr32,
SiS_SetupDDCN(SiS_Pr);
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "DDC Port %x Index %x Shift %d\n",
- SiS_Pr->SiS_DDC_Port, SiS_Pr->SiS_DDC_Index, temp);
-#endif
-#endif
return 0;
}
SiS_SetSwitchDDC2(SiS_Pr);
if(SiS_PrepareDDC(SiS_Pr)) {
SiS_SetStop(SiS_Pr);
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "Probe: Prepare failed\n");
-#endif
-#endif
return 0xFFFF;
}
mask = 0xf0;
} else {
failed = true;
ret = 0xFFFF;
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "Probe: Read 1 failed\n");
-#endif
-#endif
}
}
if(!failed) {
if(temp == value) ret = 0;
else {
ret = 0xFFFF;
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "Probe: Read 2 failed\n");
-#endif
-#endif
if(SiS_Pr->SiS_DDC_DeviceAddr == 0xa0) {
if(temp == 0x30) ret = 0;
}
return ret;
}
-#ifndef SIS_XORG_XF86
static
-#endif
unsigned short
SiS_ProbeDDC(struct SiS_Private *SiS_Pr)
{
return flag;
}
-#ifndef SIS_XORG_XF86
static
-#endif
unsigned short
SiS_ReadDDC(struct SiS_Private *SiS_Pr, unsigned short DDCdatatype, unsigned char *buffer)
{
temp = SiS_GetReg(SiS_Pr->SiS_DDC_Port,SiS_Pr->SiS_DDC_Index);
} while((!(temp & SiS_Pr->SiS_DDC_Clk)) && --watchdog);
if (!watchdog) {
-#ifdef SIS_XORG_XF86
-#ifdef TWDEBUG
- xf86DrvMsg(0, X_INFO, "SetClkHigh failed\n");
-#endif
-#endif
return 0xFFFF;
}
SiS_DDC2Delay(SiS_Pr,SiS_I2CDELAYSHORT);
projects / platform / kernel / linux-3.10.git / commitdiff