mmc: tegra: Poll for calibration completion
authorAapo Vienamo <avienamo@nvidia.com>
Thu, 30 Aug 2018 15:06:13 +0000 (18:06 +0300)
committerUlf Hansson <ulf.hansson@linaro.org>
Mon, 8 Oct 2018 09:40:43 +0000 (11:40 +0200)
Implement polling with 10 ms timeout for automatic pad drive strength
calibration.

Signed-off-by: Aapo Vienamo <avienamo@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
drivers/mmc/host/sdhci-tegra.c

index 11185e9..56b637c 100644 (file)
@@ -16,6 +16,7 @@
 #include <linux/err.h>
 #include <linux/module.h>
 #include <linux/init.h>
+#include <linux/iopoll.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/io.h>
@@ -50,6 +51,9 @@
 #define SDHCI_AUTO_CAL_START                   BIT(31)
 #define SDHCI_AUTO_CAL_ENABLE                  BIT(29)
 
+#define SDHCI_TEGRA_AUTO_CAL_STATUS            0x1ec
+#define SDHCI_TEGRA_AUTO_CAL_ACTIVE            BIT(31)
+
 #define NVQUIRK_FORCE_SDHCI_SPEC_200   BIT(0)
 #define NVQUIRK_ENABLE_BLOCK_GAP_DET   BIT(1)
 #define NVQUIRK_ENABLE_SDHCI_SPEC_300  BIT(2)
@@ -226,13 +230,21 @@ static void tegra_sdhci_reset(struct sdhci_host *host, u8 mask)
 
 static void tegra_sdhci_pad_autocalib(struct sdhci_host *host)
 {
-       u32 val;
+       u32 reg;
+       int ret;
+
+       reg = sdhci_readl(host, SDHCI_TEGRA_AUTO_CAL_CONFIG);
+       reg |= SDHCI_AUTO_CAL_ENABLE | SDHCI_AUTO_CAL_START;
+       sdhci_writel(host, reg, SDHCI_TEGRA_AUTO_CAL_CONFIG);
 
-       mdelay(1);
+       usleep_range(1, 2);
+       /* 10 ms timeout */
+       ret = readl_poll_timeout(host->ioaddr + SDHCI_TEGRA_AUTO_CAL_STATUS,
+                                reg, !(reg & SDHCI_TEGRA_AUTO_CAL_ACTIVE),
+                                1000, 10000);
 
-       val = sdhci_readl(host, SDHCI_TEGRA_AUTO_CAL_CONFIG);
-       val |= SDHCI_AUTO_CAL_ENABLE | SDHCI_AUTO_CAL_START;
-       sdhci_writel(host,val, SDHCI_TEGRA_AUTO_CAL_CONFIG);
+       if (ret)
+               dev_err(mmc_dev(host->mmc), "Pad autocal timed out\n");
 }
 
 static void tegra_sdhci_set_clock(struct sdhci_host *host, unsigned int clock)