_rtw_write8() is a wrapper function, being used to call usb_write8().
Call usb_write8() directly and drop _rtw_write8().
Signed-off-by: navin patidar <navin.patidar@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
}
switch (len) {
case 1:
- rtw_write8(padapter, addr, (u8)val);
+ usb_write8(padapter, addr, (u8)val);
break;
case 2:
usb_write16(padapter, addr, (u16)val);
}
/* Write Address */
- rtw_write8(Adapter, EFUSE_CTRL+1, (_offset & 0xff));
+ usb_write8(Adapter, EFUSE_CTRL+1, (_offset & 0xff));
readbyte = rtw_read8(Adapter, EFUSE_CTRL+2);
- rtw_write8(Adapter, EFUSE_CTRL+2, ((_offset >> 8) & 0x03) | (readbyte & 0xfc));
+ usb_write8(Adapter, EFUSE_CTRL+2, ((_offset >> 8) & 0x03) | (readbyte & 0xfc));
/* Write bit 32 0 */
readbyte = rtw_read8(Adapter, EFUSE_CTRL+3);
- rtw_write8(Adapter, EFUSE_CTRL+3, (readbyte & 0x7f));
+ usb_write8(Adapter, EFUSE_CTRL+3, (readbyte & 0x7f));
/* Check bit 32 read-ready */
retry = 0;
if (Address < contentLen) { /* E-fuse 512Byte */
/* Write E-fuse Register address bit0~7 */
temp = Address & 0xFF;
- rtw_write8(Adapter, EFUSE_CTRL+1, temp);
+ usb_write8(Adapter, EFUSE_CTRL+1, temp);
Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+2);
/* Write E-fuse Register address bit8~9 */
temp = ((Address >> 8) & 0x03) | (Bytetemp & 0xFC);
- rtw_write8(Adapter, EFUSE_CTRL+2, temp);
+ usb_write8(Adapter, EFUSE_CTRL+2, temp);
/* Write 0x30[31]= 0 */
Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+3);
temp = Bytetemp & 0x7F;
- rtw_write8(Adapter, EFUSE_CTRL+3, temp);
+ usb_write8(Adapter, EFUSE_CTRL+3, temp);
/* Wait Write-ready (0x30[31]= 1) */
Bytetemp = rtw_read8(Adapter, EFUSE_CTRL+3);
}
/* -----------------e-fuse reg ctrl --------------------------------- */
/* address */
- rtw_write8(pAdapter, EFUSE_CTRL+1, (u8)(addr & 0xff));
- rtw_write8(pAdapter, EFUSE_CTRL+2, ((u8)((addr>>8) & 0x03)) |
+ usb_write8(pAdapter, EFUSE_CTRL+1, (u8)(addr & 0xff));
+ usb_write8(pAdapter, EFUSE_CTRL+2, ((u8)((addr>>8) & 0x03)) |
(rtw_read8(pAdapter, EFUSE_CTRL+2) & 0xFC));
- rtw_write8(pAdapter, EFUSE_CTRL+3, 0x72);/* read cmd */
+ usb_write8(pAdapter, EFUSE_CTRL+3, 0x72);/* read cmd */
while (!(0x80 & rtw_read8(pAdapter, EFUSE_CTRL+3)) && (tmpidx < 100))
tmpidx++;
/* -----------------e-fuse reg ctrl --------------------------------- */
/* address */
- rtw_write8(pAdapter, EFUSE_CTRL+1, (u8)(addr&0xff));
- rtw_write8(pAdapter, EFUSE_CTRL+2,
+ usb_write8(pAdapter, EFUSE_CTRL+1, (u8)(addr&0xff));
+ usb_write8(pAdapter, EFUSE_CTRL+2,
(rtw_read8(pAdapter, EFUSE_CTRL+2) & 0xFC) |
(u8)((addr>>8) & 0x03));
- rtw_write8(pAdapter, EFUSE_CTRL, data);/* data */
+ usb_write8(pAdapter, EFUSE_CTRL, data);/* data */
- rtw_write8(pAdapter, EFUSE_CTRL+3, 0xF2);/* write cmd */
+ usb_write8(pAdapter, EFUSE_CTRL+3, 0xF2);/* write cmd */
while ((0x80 & rtw_read8(pAdapter, EFUSE_CTRL+3)) && (tmpidx < 100))
tmpidx++;
return r_val;
}
-int _rtw_write8(struct adapter *adapter, u32 addr, u8 val)
-{
- struct io_priv *pio_priv = &adapter->iopriv;
- struct intf_hdl *pintfhdl = &(pio_priv->intf);
- int (*_write8)(struct adapter *pintfhdl, u32 addr, u8 val);
- int ret;
- _write8 = pintfhdl->io_ops._write8;
-
- ret = _write8(adapter, addr, val);
-
- return RTW_STATUS_CODE(ret);
-}
-
int rtw_init_io_priv(struct adapter *padapter, void (*set_intf_ops)(struct _io_ops *pops))
{
struct io_priv *piopriv = &padapter->iopriv;
{
switch (sz) {
case 1:
- rtw_write8(padapter, addr, (u8)val);
+ usb_write8(padapter, addr, (u8)val);
break;
case 2:
usb_write16(padapter, addr, (u16)val);
/* disable Power Training, Rate Adaptive */
v8 = rtw_read8(padapter, REG_BCN_CTRL);
v8 &= ~EN_BCN_FUNCTION;
- rtw_write8(padapter, REG_BCN_CTRL, v8);
+ usb_write8(padapter, REG_BCN_CTRL, v8);
/* 3 2. disable driver dynamic mechanism */
/* disable Dynamic Initial Gain */
/* set MSR to WIFI_FW_ADHOC_STATE */
val8 = rtw_read8(padapter, MSR) & 0xFC; /* 0x0102 */
val8 |= WIFI_FW_ADHOC_STATE;
- rtw_write8(padapter, MSR, val8); /* Link in ad hoc network */
+ usb_write8(padapter, MSR, val8); /* Link in ad hoc network */
}
return res;
}
status = NDIS_STATUS_NOT_ACCEPTED;
break;
}
- rtw_write8(padapter, offset, (u8)value);
+ usb_write8(padapter, offset, (u8)value);
break;
case 2:
if (value > 0xFFFF) {
ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD, ("Reload MAC parameters !\n"));
for (i = 0; i < (IQK_MAC_REG_NUM - 1); i++) {
- rtw_write8(adapt, MACReg[i], (u8)MACBackup[i]);
+ usb_write8(adapt, MACReg[i], (u8)MACBackup[i]);
}
usb_write32(adapt, MACReg[i], MACBackup[i]);
}
ODM_RT_TRACE(dm_odm, ODM_COMP_CALIBRATION, ODM_DBG_LOUD, ("MAC settings for Calibration.\n"));
- rtw_write8(adapt, MACReg[i], 0x3F);
+ usb_write8(adapt, MACReg[i], 0x3F);
for (i = 1; i < (IQK_MAC_REG_NUM - 1); i++) {
- rtw_write8(adapt, MACReg[i], (u8)(MACBackup[i]&(~BIT3)));
+ usb_write8(adapt, MACReg[i], (u8)(MACBackup[i]&(~BIT3)));
}
- rtw_write8(adapt, MACReg[i], (u8)(MACBackup[i]&(~BIT5)));
+ usb_write8(adapt, MACReg[i], (u8)(MACBackup[i]&(~BIT5)));
}
void
tmpreg = rtw_read8(adapt, 0xd03);
if ((tmpreg&0x70) != 0) /* Deal with contisuous TX case */
- rtw_write8(adapt, 0xd03, tmpreg&0x8F); /* disable all continuous TX */
+ usb_write8(adapt, 0xd03, tmpreg&0x8F); /* disable all continuous TX */
else /* Deal with Packet TX case */
- rtw_write8(adapt, REG_TXPAUSE, 0xFF); /* block all queues */
+ usb_write8(adapt, REG_TXPAUSE, 0xFF); /* block all queues */
if ((tmpreg&0x70) != 0) {
/* 1. Read original RF mode */
if ((tmpreg&0x70) != 0) {
/* Deal with continuous TX case */
/* Path-A */
- rtw_write8(adapt, 0xd03, tmpreg);
+ usb_write8(adapt, 0xd03, tmpreg);
PHY_SetRFReg(adapt, RF_PATH_A, RF_AC, bMask12Bits, RF_Amode);
/* Path-B */
PHY_SetRFReg(adapt, RF_PATH_B, RF_AC, bMask12Bits, RF_Bmode);
} else {
/* Deal with Packet TX case */
- rtw_write8(adapt, REG_TXPAUSE, 0x00);
+ usb_write8(adapt, REG_TXPAUSE, 0x00);
}
}
if (!adapt->hw_init_completed) {
u8 u1btmp;
u1btmp = rtw_read8(adapt, REG_LEDCFG2) | BIT7;
- rtw_write8(adapt, REG_LEDCFG2, u1btmp);
+ usb_write8(adapt, REG_LEDCFG2, u1btmp);
PHY_SetBBReg(adapt, rFPGA0_XAB_RFParameter, BIT13, 0x01);
}
value |= (GET_PWR_CFG_VALUE(pwrcfgcmd) & GET_PWR_CFG_MASK(pwrcfgcmd));
/* Write the value back to system register */
- rtw_write8(padapter, offset, value);
+ usb_write8(padapter, offset, value);
break;
case PWR_CMD_POLLING:
RT_TRACE(_module_hal_init_c_ , _drv_info_, ("HalPwrSeqCmdParsing: PWR_CMD_POLLING\n"));
void c2h_evt_clear(struct adapter *adapter)
{
- rtw_write8(adapter, REG_C2HEVT_CLEAR, C2H_EVT_HOST_CLOSE);
+ usb_write8(adapter, REG_C2HEVT_CLEAR, C2H_EVT_HOST_CLOSE);
}
s32 c2h_evt_read(struct adapter *adapter, u8 *buf)
struct adapter *adapt = pDM_Odm->Adapter;
if (pDM_DigTable->CurCCK_CCAThres != CurCCK_CCAThres) /* modify by Guo.Mingzhi 2012-01-03 */
- rtw_write8(adapt, ODM_REG_CCK_CCA_11N, CurCCK_CCAThres);
+ usb_write8(adapt, ODM_REG_CCK_CCA_11N, CurCCK_CCAThres);
pDM_DigTable->PreCCK_CCAThres = pDM_DigTable->CurCCK_CCAThres;
pDM_DigTable->CurCCK_CCAThres = CurCCK_CCAThres;
}
{
struct adapter *adapt = pDM_Odm->Adapter;
- rtw_write8(adapt, Addr, Data);
+ usb_write8(adapt, Addr, Data);
ODM_RT_TRACE(pDM_Odm, ODM_COMP_INIT, ODM_DBG_TRACE, ("===> ODM_ConfigMACWithHeaderFile: [MAC_REG] %08X %08X\n", Addr, Data));
}
/* Write Ext command */
msgbox_ex_addr = REG_HMEBOX_EXT_0 + (h2c_box_num * RTL88E_EX_MESSAGE_BOX_SIZE);
for (cmd_idx = 0; cmd_idx < ext_cmd_len; cmd_idx++) {
- rtw_write8(adapt, msgbox_ex_addr+cmd_idx, *((u8 *)(&h2c_cmd_ex)+cmd_idx));
+ usb_write8(adapt, msgbox_ex_addr+cmd_idx, *((u8 *)(&h2c_cmd_ex)+cmd_idx));
}
}
/* Write command */
msgbox_addr = REG_HMEBOX_0 + (h2c_box_num * RTL88E_MESSAGE_BOX_SIZE);
for (cmd_idx = 0; cmd_idx < RTL88E_MESSAGE_BOX_SIZE; cmd_idx++) {
- rtw_write8(adapt, msgbox_addr+cmd_idx, *((u8 *)(&h2c_cmd)+cmd_idx));
+ usb_write8(adapt, msgbox_addr+cmd_idx, *((u8 *)(&h2c_cmd)+cmd_idx));
}
bcmd_down = true;
/* Set REG_CR bit 8. DMA beacon by SW. */
haldata->RegCR_1 |= BIT0;
- rtw_write8(adapt, REG_CR+1, haldata->RegCR_1);
+ usb_write8(adapt, REG_CR+1, haldata->RegCR_1);
/* Disable Hw protection for a time which revserd for Hw sending beacon. */
/* Fix download reserved page packet fail that access collision with the protection time. */
/* 2010.05.11. Added by tynli. */
- rtw_write8(adapt, REG_BCN_CTRL, rtw_read8(adapt, REG_BCN_CTRL)&(~BIT(3)));
- rtw_write8(adapt, REG_BCN_CTRL, rtw_read8(adapt, REG_BCN_CTRL)|BIT(4));
+ usb_write8(adapt, REG_BCN_CTRL, rtw_read8(adapt, REG_BCN_CTRL)&(~BIT(3)));
+ usb_write8(adapt, REG_BCN_CTRL, rtw_read8(adapt, REG_BCN_CTRL)|BIT(4));
if (haldata->RegFwHwTxQCtrl&BIT6) {
DBG_88E("HalDownloadRSVDPage(): There is an Adapter is sending beacon.\n");
}
/* Set FWHW_TXQ_CTRL 0x422[6]=0 to tell Hw the packet is not a real beacon frame. */
- rtw_write8(adapt, REG_FWHW_TXQ_CTRL+2, (haldata->RegFwHwTxQCtrl&(~BIT6)));
+ usb_write8(adapt, REG_FWHW_TXQ_CTRL+2, (haldata->RegFwHwTxQCtrl&(~BIT6)));
haldata->RegFwHwTxQCtrl &= (~BIT6);
/* Clear beacon valid check bit. */
/* */
/* Enable Bcn */
- rtw_write8(adapt, REG_BCN_CTRL, rtw_read8(adapt, REG_BCN_CTRL)|BIT(3));
- rtw_write8(adapt, REG_BCN_CTRL, rtw_read8(adapt, REG_BCN_CTRL)&(~BIT(4)));
+ usb_write8(adapt, REG_BCN_CTRL, rtw_read8(adapt, REG_BCN_CTRL)|BIT(3));
+ usb_write8(adapt, REG_BCN_CTRL, rtw_read8(adapt, REG_BCN_CTRL)&(~BIT(4)));
/* To make sure that if there exists an adapter which would like to send beacon. */
/* If exists, the origianl value of 0x422[6] will be 1, we should check this to */
/* the beacon cannot be sent by HW. */
/* 2010.06.23. Added by tynli. */
if (bSendBeacon) {
- rtw_write8(adapt, REG_FWHW_TXQ_CTRL+2, (haldata->RegFwHwTxQCtrl|BIT6));
+ usb_write8(adapt, REG_FWHW_TXQ_CTRL+2, (haldata->RegFwHwTxQCtrl|BIT6));
haldata->RegFwHwTxQCtrl |= BIT6;
}
/* Do not enable HW DMA BCN or it will cause Pcie interface hang by timing issue. 2011.11.24. by tynli. */
/* Clear CR[8] or beacon packet will not be send to TxBuf anymore. */
haldata->RegCR_1 &= (~BIT0);
- rtw_write8(adapt, REG_CR+1, haldata->RegCR_1);
+ usb_write8(adapt, REG_CR+1, haldata->RegCR_1);
}
}
/* update CTWindow value. */
if (pwdinfo->ctwindow > 0) {
p2p_ps_offload->CTWindow_En = 1;
- rtw_write8(adapt, REG_P2P_CTWIN, pwdinfo->ctwindow);
+ usb_write8(adapt, REG_P2P_CTWIN, pwdinfo->ctwindow);
}
/* hw only support 2 set of NoA */
for (i = 0; i < pwdinfo->noa_num; i++) {
/* To control the register setting for which NOA */
- rtw_write8(adapt, REG_NOA_DESC_SEL, (i << 4));
+ usb_write8(adapt, REG_NOA_DESC_SEL, (i << 4));
if (i == 0)
p2p_ps_offload->NoA0_En = 1;
else
usb_write32(adapt, REG_NOA_DESC_DURATION, pwdinfo->noa_duration[i]);
usb_write32(adapt, REG_NOA_DESC_INTERVAL, pwdinfo->noa_interval[i]);
usb_write32(adapt, REG_NOA_DESC_START, pwdinfo->noa_start_time[i]);
- rtw_write8(adapt, REG_NOA_DESC_COUNT, pwdinfo->noa_count[i]);
+ usb_write8(adapt, REG_NOA_DESC_COUNT, pwdinfo->noa_count[i]);
}
if ((pwdinfo->opp_ps == 1) || (pwdinfo->noa_num > 0)) {
/* rst p2p circuit */
- rtw_write8(adapt, REG_DUAL_TSF_RST, BIT(4));
+ usb_write8(adapt, REG_DUAL_TSF_RST, BIT(4));
p2p_ps_offload->Offload_En = 1;
tmp1byte = rtw_read8(Adapter, REG_GPIO_MUXCFG);
tmp1byte &= (GPIOSEL_GPIO | ~GPIOSEL_ENBT);
- rtw_write8(Adapter, REG_GPIO_MUXCFG, tmp1byte);
+ usb_write8(Adapter, REG_GPIO_MUXCFG, tmp1byte);
}
/* */
if (enable) {
/* Enable initial offload */
reg_0xf0 = rtw_read8(padapter, REG_SYS_CFG);
- rtw_write8(padapter, REG_SYS_CFG, reg_0xf0|SW_OFFLOAD_EN);
+ usb_write8(padapter, REG_SYS_CFG, reg_0xf0|SW_OFFLOAD_EN);
if (!padapter->bFWReady) {
DBG_88E("bFWReady == false call reset 8051...\n");
} else {
/* disable initial offload */
reg_0xf0 = rtw_read8(padapter, REG_SYS_CFG);
- rtw_write8(padapter, REG_SYS_CFG, reg_0xf0 & ~SW_OFFLOAD_EN);
+ usb_write8(padapter, REG_SYS_CFG, reg_0xf0 & ~SW_OFFLOAD_EN);
}
}
control = control&0x0f;
reg_0x88 = rtw_read8(padapter, REG_HMEBOX_E0);
- rtw_write8(padapter, REG_HMEBOX_E0, reg_0x88|control);
+ usb_write8(padapter, REG_HMEBOX_E0, reg_0x88|control);
start = jiffies;
while ((reg_0x88 = rtw_read8(padapter, REG_HMEBOX_E0)) & control &&
{
s32 rst = _SUCCESS;
iol_mode_enable(padapter, 1);
- rtw_write8(padapter, REG_TDECTRL+1, txpktbuf_bndy);
+ usb_write8(padapter, REG_TDECTRL+1, txpktbuf_bndy);
rst = iol_execute(padapter, CMD_INIT_LLT);
iol_mode_enable(padapter, 0);
return rst;
DBG_88E("%s bcnhead:%d\n", __func__, bcnhead);
- rtw_write8(adapter, REG_PKT_BUFF_ACCESS_CTRL, TXPKT_BUF_SELECT);
+ usb_write8(adapter, REG_PKT_BUFF_ACCESS_CTRL, TXPKT_BUF_SELECT);
dbg_addr = bcnhead*128/8; /* 8-bytes addressing */
while (1) {
usb_write16(adapter, REG_PKTBUF_DBG_ADDR, dbg_addr+i);
- rtw_write8(adapter, REG_TXPKTBUF_DBG, 0);
+ usb_write8(adapter, REG_TXPKTBUF_DBG, 0);
start = jiffies;
while (!(reg_0x143 = rtw_read8(adapter, REG_TXPKTBUF_DBG)) &&
(passing_time = rtw_get_passing_time_ms(start)) < 1000) {
break;
i++;
}
- rtw_write8(adapter, REG_PKT_BUFF_ACCESS_CTRL, DISABLE_TRXPKT_BUF_ACCESS);
+ usb_write8(adapter, REG_PKT_BUFF_ACCESS_CTRL, DISABLE_TRXPKT_BUF_ACCESS);
DBG_88E("%s read count:%u\n", __func__, count);
*size = count;
}
u8 physical_map[512];
u16 size = 512;
- rtw_write8(padapter, REG_TDECTRL+1, txpktbuf_bndy);
+ usb_write8(padapter, REG_TDECTRL+1, txpktbuf_bndy);
_rtw_memset(physical_map, 0xFF, 512);
- rtw_write8(padapter, REG_PKT_BUFF_ACCESS_CTRL, TXPKT_BUF_SELECT);
+ usb_write8(padapter, REG_PKT_BUFF_ACCESS_CTRL, TXPKT_BUF_SELECT);
status = iol_execute(padapter, CMD_READ_EFUSE_MAP);
if (status == _SUCCESS)
efuse_read_phymap_from_txpktbuf(padapter, txpktbuf_bndy, physical_map, &size);
{
s32 rst = _SUCCESS;
- rtw_write8(padapter, REG_TDECTRL+1, iocfg_bndy);
+ usb_write8(padapter, REG_TDECTRL+1, iocfg_bndy);
rst = iol_execute(padapter, CMD_IOCONFIG);
return rst;
}
iol_mode_enable(adapter, 0);
exit:
/* restore BCN_HEAD */
- rtw_write8(adapter, REG_TDECTRL+1, 0);
+ usb_write8(adapter, REG_TDECTRL+1, 0);
return ret;
}
u8 *pbuf = vzalloc(data_len+10);
DBG_88E("###### %s ######\n", __func__);
- rtw_write8(Adapter, REG_PKT_BUFF_ACCESS_CTRL, TXPKT_BUF_SELECT);
+ usb_write8(Adapter, REG_PKT_BUFF_ACCESS_CTRL, TXPKT_BUF_SELECT);
if (pbuf) {
for (addr = 0; addr < data_cnts; addr++) {
usb_write32(Adapter, 0x140, addr);
if (enable) {
/* MCU firmware download enable. */
tmp = rtw_read8(padapter, REG_MCUFWDL);
- rtw_write8(padapter, REG_MCUFWDL, tmp | 0x01);
+ usb_write8(padapter, REG_MCUFWDL, tmp | 0x01);
/* 8051 reset */
tmp = rtw_read8(padapter, REG_MCUFWDL+2);
- rtw_write8(padapter, REG_MCUFWDL+2, tmp&0xf7);
+ usb_write8(padapter, REG_MCUFWDL+2, tmp&0xf7);
} else {
/* MCU firmware download disable. */
tmp = rtw_read8(padapter, REG_MCUFWDL);
- rtw_write8(padapter, REG_MCUFWDL, tmp&0xfe);
+ usb_write8(padapter, REG_MCUFWDL, tmp&0xfe);
/* Reserved for fw extension. */
- rtw_write8(padapter, REG_MCUFWDL+1, 0x00);
+ usb_write8(padapter, REG_MCUFWDL+1, 0x00);
}
}
(buffSize-offset), blockSize_p3, blockCount_p3));
for (i = 0; i < blockCount_p3; i++) {
- ret = rtw_write8(padapter, (FW_8188E_START_ADDRESS + offset + i), *(bufferPtr + offset + i));
+ ret = usb_write8(padapter, (FW_8188E_START_ADDRESS + offset + i), *(bufferPtr + offset + i));
if (ret == _FAIL)
goto exit;
u8 u8Page = (u8)(page & 0x07);
value8 = (rtw_read8(padapter, REG_MCUFWDL+2) & 0xF8) | u8Page;
- rtw_write8(padapter, REG_MCUFWDL+2, value8);
+ usb_write8(padapter, REG_MCUFWDL+2, value8);
return _BlockWrite(padapter, buffer, size);
}
u8 u1bTmp;
u1bTmp = rtw_read8(padapter, REG_SYS_FUNC_EN+1);
- rtw_write8(padapter, REG_SYS_FUNC_EN+1, u1bTmp&(~BIT2));
- rtw_write8(padapter, REG_SYS_FUNC_EN+1, u1bTmp|(BIT2));
+ usb_write8(padapter, REG_SYS_FUNC_EN+1, u1bTmp&(~BIT2));
+ usb_write8(padapter, REG_SYS_FUNC_EN+1, u1bTmp|(BIT2));
DBG_88E("=====> _8051Reset88E(): 8051 reset success .\n");
}
/* Suggested by Filen. If 8051 is running in RAM code, driver should inform Fw to reset by itself, */
/* or it will cause download Fw fail. 2010.02.01. by tynli. */
if (rtw_read8(padapter, REG_MCUFWDL) & RAM_DL_SEL) { /* 8051 RAM code */
- rtw_write8(padapter, REG_MCUFWDL, 0x00);
+ usb_write8(padapter, REG_MCUFWDL, 0x00);
_8051Reset88E(padapter);
}
fwdl_start_time = jiffies;
while (1) {
/* reset the FWDL chksum */
- rtw_write8(padapter, REG_MCUFWDL, rtw_read8(padapter, REG_MCUFWDL) | FWDL_ChkSum_rpt);
+ usb_write8(padapter, REG_MCUFWDL, rtw_read8(padapter, REG_MCUFWDL) | FWDL_ChkSum_rpt);
rtStatus = _WriteFW(padapter, pFirmwareBuf, FirmwareLen);
u16 tmpV16;
if (PwrState) {
- rtw_write8(pAdapter, REG_EFUSE_ACCESS, EFUSE_ACCESS_ON);
+ usb_write8(pAdapter, REG_EFUSE_ACCESS, EFUSE_ACCESS_ON);
/* 1.2V Power: From VDDON with Power Cut(0x0000h[15]), defualt valid */
tmpV16 = rtw_read16(pAdapter, REG_SYS_ISO_CTRL);
tempval = rtw_read8(pAdapter, EFUSE_TEST+3);
tempval &= 0x0F;
tempval |= (VOLTAGE_V25 << 4);
- rtw_write8(pAdapter, EFUSE_TEST+3, (tempval | 0x80));
+ usb_write8(pAdapter, EFUSE_TEST+3, (tempval | 0x80));
}
} else {
- rtw_write8(pAdapter, REG_EFUSE_ACCESS, EFUSE_ACCESS_OFF);
+ usb_write8(pAdapter, REG_EFUSE_ACCESS, EFUSE_ACCESS_OFF);
if (bWrite) {
/* Disable LDO 2.5V after read/write action */
tempval = rtw_read8(pAdapter, EFUSE_TEST+3);
- rtw_write8(pAdapter, EFUSE_TEST+3, (tempval & 0x7F));
+ usb_write8(pAdapter, EFUSE_TEST+3, (tempval & 0x7F));
}
}
}
{
if (enable) {
DBG_88E("Enable notch filter\n");
- rtw_write8(adapter, rOFDM0_RxDSP+1, rtw_read8(adapter, rOFDM0_RxDSP+1) | BIT1);
+ usb_write8(adapter, rOFDM0_RxDSP+1, rtw_read8(adapter, rOFDM0_RxDSP+1) | BIT1);
} else {
DBG_88E("Disable notch filter\n");
- rtw_write8(adapter, rOFDM0_RxDSP+1, rtw_read8(adapter, rOFDM0_RxDSP+1) & ~BIT1);
+ usb_write8(adapter, rOFDM0_RxDSP+1, rtw_read8(adapter, rOFDM0_RxDSP+1) & ~BIT1);
}
}
void rtl8188e_set_hal_ops(struct hal_ops *pHalFunc)
pHalData->RegBcnCtrlVal |= SetBits;
pHalData->RegBcnCtrlVal &= ~ClearBits;
- rtw_write8(padapter, REG_BCN_CTRL, (u8)pHalData->RegBcnCtrlVal);
+ usb_write8(padapter, REG_BCN_CTRL, (u8)pHalData->RegBcnCtrlVal);
}
CCK_index = 32;
/* Adjust CCK according to gain index */
if (!pDM_Odm->RFCalibrateInfo.bCCKinCH14) {
- rtw_write8(pAdapter, 0xa22, CCKSwingTable_Ch1_Ch13[CCK_index][0]);
- rtw_write8(pAdapter, 0xa23, CCKSwingTable_Ch1_Ch13[CCK_index][1]);
- rtw_write8(pAdapter, 0xa24, CCKSwingTable_Ch1_Ch13[CCK_index][2]);
- rtw_write8(pAdapter, 0xa25, CCKSwingTable_Ch1_Ch13[CCK_index][3]);
- rtw_write8(pAdapter, 0xa26, CCKSwingTable_Ch1_Ch13[CCK_index][4]);
- rtw_write8(pAdapter, 0xa27, CCKSwingTable_Ch1_Ch13[CCK_index][5]);
- rtw_write8(pAdapter, 0xa28, CCKSwingTable_Ch1_Ch13[CCK_index][6]);
- rtw_write8(pAdapter, 0xa29, CCKSwingTable_Ch1_Ch13[CCK_index][7]);
+ usb_write8(pAdapter, 0xa22, CCKSwingTable_Ch1_Ch13[CCK_index][0]);
+ usb_write8(pAdapter, 0xa23, CCKSwingTable_Ch1_Ch13[CCK_index][1]);
+ usb_write8(pAdapter, 0xa24, CCKSwingTable_Ch1_Ch13[CCK_index][2]);
+ usb_write8(pAdapter, 0xa25, CCKSwingTable_Ch1_Ch13[CCK_index][3]);
+ usb_write8(pAdapter, 0xa26, CCKSwingTable_Ch1_Ch13[CCK_index][4]);
+ usb_write8(pAdapter, 0xa27, CCKSwingTable_Ch1_Ch13[CCK_index][5]);
+ usb_write8(pAdapter, 0xa28, CCKSwingTable_Ch1_Ch13[CCK_index][6]);
+ usb_write8(pAdapter, 0xa29, CCKSwingTable_Ch1_Ch13[CCK_index][7]);
} else {
- rtw_write8(pAdapter, 0xa22, CCKSwingTable_Ch14[CCK_index][0]);
- rtw_write8(pAdapter, 0xa23, CCKSwingTable_Ch14[CCK_index][1]);
- rtw_write8(pAdapter, 0xa24, CCKSwingTable_Ch14[CCK_index][2]);
- rtw_write8(pAdapter, 0xa25, CCKSwingTable_Ch14[CCK_index][3]);
- rtw_write8(pAdapter, 0xa26, CCKSwingTable_Ch14[CCK_index][4]);
- rtw_write8(pAdapter, 0xa27, CCKSwingTable_Ch14[CCK_index][5]);
- rtw_write8(pAdapter, 0xa28, CCKSwingTable_Ch14[CCK_index][6]);
- rtw_write8(pAdapter, 0xa29, CCKSwingTable_Ch14[CCK_index][7]);
+ usb_write8(pAdapter, 0xa22, CCKSwingTable_Ch14[CCK_index][0]);
+ usb_write8(pAdapter, 0xa23, CCKSwingTable_Ch14[CCK_index][1]);
+ usb_write8(pAdapter, 0xa24, CCKSwingTable_Ch14[CCK_index][2]);
+ usb_write8(pAdapter, 0xa25, CCKSwingTable_Ch14[CCK_index][3]);
+ usb_write8(pAdapter, 0xa26, CCKSwingTable_Ch14[CCK_index][4]);
+ usb_write8(pAdapter, 0xa27, CCKSwingTable_Ch14[CCK_index][5]);
+ usb_write8(pAdapter, 0xa28, CCKSwingTable_Ch14[CCK_index][6]);
+ usb_write8(pAdapter, 0xa29, CCKSwingTable_Ch14[CCK_index][7]);
}
}
}
/* 20090923 Joseph: Advised by Steven and Jenyu. Power sequence before init RF. */
- rtw_write8(Adapter, REG_RF_CTRL, RF_EN|RF_RSTB|RF_SDMRSTB);
+ usb_write8(Adapter, REG_RF_CTRL, RF_EN|RF_RSTB|RF_SDMRSTB);
- rtw_write8(Adapter, REG_SYS_FUNC_EN, FEN_USBA | FEN_USBD | FEN_BB_GLB_RSTn | FEN_BBRSTB);
+ usb_write8(Adapter, REG_SYS_FUNC_EN, FEN_USBA | FEN_USBD | FEN_BB_GLB_RSTn | FEN_BBRSTB);
/* Config BB and AGC */
rtStatus = phy_BB8188E_Config_ParaFile(Adapter);
case HT_CHANNEL_WIDTH_20:
regBwOpMode |= BW_OPMODE_20MHZ;
/* 2007/02/07 Mark by Emily because we have not verify whether this register works */
- rtw_write8(Adapter, REG_BWOPMODE, regBwOpMode);
+ usb_write8(Adapter, REG_BWOPMODE, regBwOpMode);
break;
case HT_CHANNEL_WIDTH_40:
regBwOpMode &= ~BW_OPMODE_20MHZ;
/* 2007/02/07 Mark by Emily because we have not verify whether this register works */
- rtw_write8(Adapter, REG_BWOPMODE, regBwOpMode);
+ usb_write8(Adapter, REG_BWOPMODE, regBwOpMode);
regRRSR_RSC = (regRRSR_RSC&0x90) | (pHalData->nCur40MhzPrimeSC<<5);
- rtw_write8(Adapter, REG_RRSR+2, regRRSR_RSC);
+ usb_write8(Adapter, REG_RRSR+2, regRRSR_RSC);
break;
default:
break;
writeVal = (writeVal > 8) ? (writeVal-8) : 0;
else
writeVal = (writeVal > 6) ? (writeVal-6) : 0;
- rtw_write8(Adapter, (u32)(regoffset+i), (u8)writeVal);
+ usb_write8(Adapter, (u32)(regoffset+i), (u8)writeVal);
}
}
}
if (padapter->bSurpriseRemoved || padapter->bDriverStopped)
return;
LedCfg = rtw_read8(padapter, REG_LEDCFG2);
- rtw_write8(padapter, REG_LEDCFG2, (LedCfg&0xf0)|BIT5|BIT6); /* SW control led0 on. */
+ usb_write8(padapter, REG_LEDCFG2, (LedCfg&0xf0)|BIT5|BIT6); /* SW control led0 on. */
pLed->bLedOn = true;
}
if (pHalData->bLedOpenDrain) {
/* Open-drain arrangement for controlling the LED) */
LedCfg &= 0x90; /* Set to software control. */
- rtw_write8(padapter, REG_LEDCFG2, (LedCfg|BIT3));
+ usb_write8(padapter, REG_LEDCFG2, (LedCfg|BIT3));
LedCfg = rtw_read8(padapter, REG_MAC_PINMUX_CFG);
LedCfg &= 0xFE;
- rtw_write8(padapter, REG_MAC_PINMUX_CFG, LedCfg);
+ usb_write8(padapter, REG_MAC_PINMUX_CFG, LedCfg);
} else {
- rtw_write8(padapter, REG_LEDCFG2, (LedCfg|BIT3|BIT5|BIT6));
+ usb_write8(padapter, REG_LEDCFG2, (LedCfg|BIT3|BIT5|BIT6));
}
exit:
pLed->bLedOn = false;
else
usb_opt = usb_opt | (INT_BULK_SEL);
- rtw_write8(Adapter, REG_USB_SPECIAL_OPTION, usb_opt);
+ usb_write8(Adapter, REG_USB_SPECIAL_OPTION, usb_opt);
}
static void _InitQueueReservedPage(struct adapter *Adapter)
if (haldata->OutEpQueueSel & TX_SELE_NQ)
numNQ = 0x1C;
value8 = (u8)_NPQ(numNQ);
- rtw_write8(Adapter, REG_RQPN_NPQ, value8);
+ usb_write8(Adapter, REG_RQPN_NPQ, value8);
numPubQ = 0xA8 - numHQ - numLQ - numNQ;
static void _InitTxBufferBoundary(struct adapter *Adapter, u8 txpktbuf_bndy)
{
- rtw_write8(Adapter, REG_TXPKTBUF_BCNQ_BDNY, txpktbuf_bndy);
- rtw_write8(Adapter, REG_TXPKTBUF_MGQ_BDNY, txpktbuf_bndy);
- rtw_write8(Adapter, REG_TXPKTBUF_WMAC_LBK_BF_HD, txpktbuf_bndy);
- rtw_write8(Adapter, REG_TRXFF_BNDY, txpktbuf_bndy);
- rtw_write8(Adapter, REG_TDECTRL+1, txpktbuf_bndy);
+ usb_write8(Adapter, REG_TXPKTBUF_BCNQ_BDNY, txpktbuf_bndy);
+ usb_write8(Adapter, REG_TXPKTBUF_MGQ_BDNY, txpktbuf_bndy);
+ usb_write8(Adapter, REG_TXPKTBUF_WMAC_LBK_BF_HD, txpktbuf_bndy);
+ usb_write8(Adapter, REG_TRXFF_BNDY, txpktbuf_bndy);
+ usb_write8(Adapter, REG_TDECTRL+1, txpktbuf_bndy);
}
static void _InitPageBoundary(struct adapter *Adapter)
u8 value8;
value8 = _PSRX(PBP_128) | _PSTX(PBP_128);
- rtw_write8(Adapter, REG_PBP, value8);
+ usb_write8(Adapter, REG_PBP, value8);
}
static void _InitDriverInfoSize(struct adapter *Adapter, u8 drvInfoSize)
{
- rtw_write8(Adapter, REG_RX_DRVINFO_SZ, drvInfoSize);
+ usb_write8(Adapter, REG_RX_DRVINFO_SZ, drvInfoSize);
}
static void _InitWMACSetting(struct adapter *Adapter)
static void _InitRDGSetting(struct adapter *Adapter)
{
- rtw_write8(Adapter, REG_RD_CTRL, 0xFF);
+ usb_write8(Adapter, REG_RD_CTRL, 0xFF);
usb_write16(Adapter, REG_RD_NAV_NXT, 0x200);
- rtw_write8(Adapter, REG_RD_RESP_PKT_TH, 0x05);
+ usb_write8(Adapter, REG_RD_RESP_PKT_TH, 0x05);
}
static void _InitRxSetting(struct adapter *Adapter)
value8 = rtw_read8(Adapter, REG_FWHW_TXQ_CTRL);
value8 |= EN_AMPDU_RTY_NEW;
- rtw_write8(Adapter, REG_FWHW_TXQ_CTRL, value8);
+ usb_write8(Adapter, REG_FWHW_TXQ_CTRL, value8);
/* Set ACK timeout */
- rtw_write8(Adapter, REG_ACKTO, 0x40);
+ usb_write8(Adapter, REG_ACKTO, 0x40);
}
/*-----------------------------------------------------------------------------
break;
}
- rtw_write8(Adapter, REG_TRXDMA_CTRL, valueDMA);
- rtw_write8(Adapter, REG_USB_SPECIAL_OPTION, valueUSB);
+ usb_write8(Adapter, REG_TRXDMA_CTRL, valueDMA);
+ usb_write8(Adapter, REG_USB_SPECIAL_OPTION, valueUSB);
switch (haldata->UsbRxAggMode) {
case USB_RX_AGG_DMA:
- rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH, haldata->UsbRxAggPageCount);
- rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH+1, haldata->UsbRxAggPageTimeout);
+ usb_write8(Adapter, REG_RXDMA_AGG_PG_TH, haldata->UsbRxAggPageCount);
+ usb_write8(Adapter, REG_RXDMA_AGG_PG_TH+1, haldata->UsbRxAggPageTimeout);
break;
case USB_RX_AGG_USB:
- rtw_write8(Adapter, REG_USB_AGG_TH, haldata->UsbRxAggBlockCount);
- rtw_write8(Adapter, REG_USB_AGG_TO, haldata->UsbRxAggBlockTimeout);
+ usb_write8(Adapter, REG_USB_AGG_TH, haldata->UsbRxAggBlockCount);
+ usb_write8(Adapter, REG_USB_AGG_TO, haldata->UsbRxAggBlockTimeout);
break;
case USB_RX_AGG_MIX:
- rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH, haldata->UsbRxAggPageCount);
- rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH+1, (haldata->UsbRxAggPageTimeout & 0x1F));/* 0x280[12:8] */
- rtw_write8(Adapter, REG_USB_AGG_TH, haldata->UsbRxAggBlockCount);
- rtw_write8(Adapter, REG_USB_AGG_TO, haldata->UsbRxAggBlockTimeout);
+ usb_write8(Adapter, REG_RXDMA_AGG_PG_TH, haldata->UsbRxAggPageCount);
+ usb_write8(Adapter, REG_RXDMA_AGG_PG_TH+1, (haldata->UsbRxAggPageTimeout & 0x1F));/* 0x280[12:8] */
+ usb_write8(Adapter, REG_USB_AGG_TH, haldata->UsbRxAggBlockCount);
+ usb_write8(Adapter, REG_USB_AGG_TO, haldata->UsbRxAggBlockTimeout);
break;
case USB_RX_AGG_DISABLE:
default:
/* TODO: Remove these magic number */
usb_write16(Adapter, REG_TBTT_PROHIBIT, 0x6404);/* ms */
- rtw_write8(Adapter, REG_DRVERLYINT, DRIVER_EARLY_INT_TIME);/* 5ms */
- rtw_write8(Adapter, REG_BCNDMATIM, BCN_DMA_ATIME_INT_TIME); /* 2ms */
+ usb_write8(Adapter, REG_DRVERLYINT, DRIVER_EARLY_INT_TIME);/* 5ms */
+ usb_write8(Adapter, REG_BCNDMATIM, BCN_DMA_ATIME_INT_TIME); /* 2ms */
/* Suggested by designer timchen. Change beacon AIFS to the largest number */
/* beacause test chip does not contension before sending beacon. by tynli. 2009.11.03 */
static void _BeaconFunctionEnable(struct adapter *Adapter,
bool Enable, bool Linked)
{
- rtw_write8(Adapter, REG_BCN_CTRL, (BIT4 | BIT3 | BIT1));
+ usb_write8(Adapter, REG_BCN_CTRL, (BIT4 | BIT3 | BIT1));
- rtw_write8(Adapter, REG_RD_CTRL+1, 0x6F);
+ usb_write8(Adapter, REG_RD_CTRL+1, 0x6F);
}
/* Set CCK and OFDM Block "ON" */
DBG_88E("pwrdown, 0x5c(BIT7)=%02x\n", val8);
rfpowerstate = (val8 & BIT7) ? rf_off : rf_on;
} else { /* rf on/off */
- rtw_write8(adapt, REG_MAC_PINMUX_CFG, rtw_read8(adapt, REG_MAC_PINMUX_CFG)&~(BIT3));
+ usb_write8(adapt, REG_MAC_PINMUX_CFG, rtw_read8(adapt, REG_MAC_PINMUX_CFG)&~(BIT3));
val8 = rtw_read8(adapt, REG_GPIO_IO_SEL);
DBG_88E("GPIO_IN=%02x\n", val8);
rfpowerstate = (val8 & BIT3) ? rf_on : rf_off;
/* Enable MACTXEN/MACRXEN block */
value16 = rtw_read16(Adapter, REG_CR);
value16 |= (MACTXEN | MACRXEN);
- rtw_write8(Adapter, REG_CR, value16);
+ usb_write8(Adapter, REG_CR, value16);
if (haldata->bRDGEnable)
_InitRDGSetting(Adapter);
/* Enable TX Report */
/* Enable Tx Report Timer */
value8 = rtw_read8(Adapter, REG_TX_RPT_CTRL);
- rtw_write8(Adapter, REG_TX_RPT_CTRL, (value8|BIT1|BIT0));
+ usb_write8(Adapter, REG_TX_RPT_CTRL, (value8|BIT1|BIT0));
/* Set MAX RPT MACID */
- rtw_write8(Adapter, REG_TX_RPT_CTRL+1, 2);/* FOR sta mode ,0: bc/mc ,1:AP */
+ usb_write8(Adapter, REG_TX_RPT_CTRL+1, 2);/* FOR sta mode ,0: bc/mc ,1:AP */
/* Tx RPT Timer. Unit: 32us */
usb_write16(Adapter, REG_TX_RPT_TIME, 0xCdf0);
- rtw_write8(Adapter, REG_EARLY_MODE_CONTROL, 0);
+ usb_write8(Adapter, REG_EARLY_MODE_CONTROL, 0);
usb_write16(Adapter, REG_PKT_VO_VI_LIFE_TIME, 0x0400); /* unit: 256us. 256ms */
usb_write16(Adapter, REG_PKT_BE_BK_LIFE_TIME, 0x0400); /* unit: 256us. 256ms */
/* HW SEQ CTRL */
/* set 0x0 to 0xFF by tynli. Default enable HW SEQ NUM. */
- rtw_write8(Adapter, REG_HWSEQ_CTRL, 0xFF);
+ usb_write8(Adapter, REG_HWSEQ_CTRL, 0xFF);
if (pregistrypriv->wifi_spec)
usb_write16(Adapter, REG_FAST_EDCA_CTRL, 0);
/* Nav limit , suggest by scott */
- rtw_write8(Adapter, 0x652, 0x0);
+ usb_write8(Adapter, 0x652, 0x0);
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_HAL_DM);
rtl8188e_InitHalDm(Adapter);
pwrctrlpriv->rf_pwrstate = rf_on;
/* enable Tx report. */
- rtw_write8(Adapter, REG_FWHW_TXQ_CTRL+1, 0x0F);
+ usb_write8(Adapter, REG_FWHW_TXQ_CTRL+1, 0x0F);
/* Suggested by SD1 pisa. Added by tynli. 2011.10.21. */
- rtw_write8(Adapter, REG_EARLY_MODE_CONTROL+3, 0x01);/* Pretx_en, for WEP/TKIP SEC */
+ usb_write8(Adapter, REG_EARLY_MODE_CONTROL+3, 0x01);/* Pretx_en, for WEP/TKIP SEC */
/* tynli_test_tx_report. */
usb_write16(Adapter, REG_TX_RPT_TIME, 0x3DF0);
/* HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_INIT_PABIAS); */
/* _InitPABias(Adapter); */
- rtw_write8(Adapter, REG_USB_HRPWM, 0);
+ usb_write8(Adapter, REG_USB_HRPWM, 0);
/* ack for xmit mgmt frames. */
usb_write32(Adapter, REG_FWHW_TXQ_CTRL, rtw_read32(Adapter, REG_FWHW_TXQ_CTRL)|BIT(12));
/* Stop Tx Report Timer. 0x4EC[Bit1]=b'0 */
val8 = rtw_read8(Adapter, REG_TX_RPT_CTRL);
- rtw_write8(Adapter, REG_TX_RPT_CTRL, val8&(~BIT1));
+ usb_write8(Adapter, REG_TX_RPT_CTRL, val8&(~BIT1));
/* stop rx */
- rtw_write8(Adapter, REG_CR, 0x0);
+ usb_write8(Adapter, REG_CR, 0x0);
/* Run LPS WL RFOFF flow */
HalPwrSeqCmdParsing(Adapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8188E_NIC_LPS_ENTER_FLOW);
/* Reset MCU 0x2[10]=0. */
val8 = rtw_read8(Adapter, REG_SYS_FUNC_EN+1);
val8 &= ~BIT(2); /* 0x2[10], FEN_CPUEN */
- rtw_write8(Adapter, REG_SYS_FUNC_EN+1, val8);
+ usb_write8(Adapter, REG_SYS_FUNC_EN+1, val8);
}
/* reset MCU ready status */
- rtw_write8(Adapter, REG_MCUFWDL, 0);
+ usb_write8(Adapter, REG_MCUFWDL, 0);
/* YJ,add,111212 */
/* Disable 32k */
val8 = rtw_read8(Adapter, REG_32K_CTRL);
- rtw_write8(Adapter, REG_32K_CTRL, val8&(~BIT0));
+ usb_write8(Adapter, REG_32K_CTRL, val8&(~BIT0));
/* Card disable power action flow */
HalPwrSeqCmdParsing(Adapter, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK, PWR_INTF_USB_MSK, Rtl8188E_NIC_DISABLE_FLOW);
/* Reset MCU IO Wrapper */
val8 = rtw_read8(Adapter, REG_RSV_CTRL+1);
- rtw_write8(Adapter, REG_RSV_CTRL+1, (val8&(~BIT3)));
+ usb_write8(Adapter, REG_RSV_CTRL+1, (val8&(~BIT3)));
val8 = rtw_read8(Adapter, REG_RSV_CTRL+1);
- rtw_write8(Adapter, REG_RSV_CTRL+1, val8|BIT3);
+ usb_write8(Adapter, REG_RSV_CTRL+1, val8|BIT3);
/* YJ,test add, 111207. For Power Consumption. */
val8 = rtw_read8(Adapter, GPIO_IN);
- rtw_write8(Adapter, GPIO_OUT, val8);
- rtw_write8(Adapter, GPIO_IO_SEL, 0xFF);/* Reg0x46 */
+ usb_write8(Adapter, GPIO_OUT, val8);
+ usb_write8(Adapter, GPIO_IO_SEL, 0xFF);/* Reg0x46 */
val8 = rtw_read8(Adapter, REG_GPIO_IO_SEL);
- rtw_write8(Adapter, REG_GPIO_IO_SEL, (val8<<4));
+ usb_write8(Adapter, REG_GPIO_IO_SEL, (val8<<4));
val8 = rtw_read8(Adapter, REG_GPIO_IO_SEL+1);
- rtw_write8(Adapter, REG_GPIO_IO_SEL+1, val8|0x0F);/* Reg0x43 */
+ usb_write8(Adapter, REG_GPIO_IO_SEL+1, val8|0x0F);/* Reg0x43 */
usb_write32(Adapter, REG_BB_PAD_CTRL, 0x00080808);/* set LNA ,TRSW,EX_PA Pin to output mode */
haldata->bMacPwrCtrlOn = false;
Adapter->bFWReady = false;
/* Then enable power down control bit of register 0x04 BIT4 and BIT15 as 1. */
/* Enable register area 0x0-0xc. */
- rtw_write8(adapt, REG_RSV_CTRL, 0x0);
+ usb_write8(adapt, REG_RSV_CTRL, 0x0);
usb_write16(adapt, REG_APS_FSMCO, 0x8812);
}
/* 2010.03.01. Marked by tynli. No need to call workitem beacause we record the value */
/* which should be read from register to a global variable. */
- rtw_write8(adapt, REG_FWHW_TXQ_CTRL+2, (haldata->RegFwHwTxQCtrl) | BIT6);
+ usb_write8(adapt, REG_FWHW_TXQ_CTRL+2, (haldata->RegFwHwTxQCtrl) | BIT6);
haldata->RegFwHwTxQCtrl |= BIT6;
- rtw_write8(adapt, REG_TBTT_PROHIBIT+1, 0xff);
+ usb_write8(adapt, REG_TBTT_PROHIBIT+1, 0xff);
haldata->RegReg542 |= BIT0;
- rtw_write8(adapt, REG_TBTT_PROHIBIT+2, haldata->RegReg542);
+ usb_write8(adapt, REG_TBTT_PROHIBIT+2, haldata->RegReg542);
}
static void StopTxBeacon(struct adapter *adapt)
/* 2010.03.01. Marked by tynli. No need to call workitem beacause we record the value */
/* which should be read from register to a global variable. */
- rtw_write8(adapt, REG_FWHW_TXQ_CTRL+2, (haldata->RegFwHwTxQCtrl) & (~BIT6));
+ usb_write8(adapt, REG_FWHW_TXQ_CTRL+2, (haldata->RegFwHwTxQCtrl) & (~BIT6));
haldata->RegFwHwTxQCtrl &= (~BIT6);
- rtw_write8(adapt, REG_TBTT_PROHIBIT+1, 0x64);
+ usb_write8(adapt, REG_TBTT_PROHIBIT+1, 0x64);
haldata->RegReg542 &= ~(BIT0);
- rtw_write8(adapt, REG_TBTT_PROHIBIT+2, haldata->RegReg542);
+ usb_write8(adapt, REG_TBTT_PROHIBIT+2, haldata->RegReg542);
/* todo: CheckFwRsvdPageContent(Adapter); 2010.06.23. Added by tynli. */
}
u8 mode = *((u8 *)val);
/* disable Port0 TSF update */
- rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(4));
+ usb_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(4));
/* set net_type */
val8 = rtw_read8(Adapter, MSR)&0x0c;
val8 |= mode;
- rtw_write8(Adapter, MSR, val8);
+ usb_write8(Adapter, MSR, val8);
DBG_88E("%s()-%d mode = %d\n", __func__, __LINE__, mode);
if ((mode == _HW_STATE_STATION_) || (mode == _HW_STATE_NOLINK_)) {
StopTxBeacon(Adapter);
- rtw_write8(Adapter, REG_BCN_CTRL, 0x19);/* disable atim wnd */
+ usb_write8(Adapter, REG_BCN_CTRL, 0x19);/* disable atim wnd */
} else if ((mode == _HW_STATE_ADHOC_)) {
ResumeTxBeacon(Adapter);
- rtw_write8(Adapter, REG_BCN_CTRL, 0x1a);
+ usb_write8(Adapter, REG_BCN_CTRL, 0x1a);
} else if (mode == _HW_STATE_AP_) {
ResumeTxBeacon(Adapter);
- rtw_write8(Adapter, REG_BCN_CTRL, 0x12);
+ usb_write8(Adapter, REG_BCN_CTRL, 0x12);
/* Set RCR */
usb_write32(Adapter, REG_RCR, 0x7000208e);/* CBSSID_DATA must set to 0,reject ICV_ERR packet */
usb_write16(Adapter, REG_RXFLTMAP1, 0x0400);
/* Beacon Control related register for first time */
- rtw_write8(Adapter, REG_BCNDMATIM, 0x02); /* 2ms */
+ usb_write8(Adapter, REG_BCNDMATIM, 0x02); /* 2ms */
- rtw_write8(Adapter, REG_ATIMWND, 0x0a); /* 10ms */
+ usb_write8(Adapter, REG_ATIMWND, 0x0a); /* 10ms */
usb_write16(Adapter, REG_BCNTCFG, 0x00);
usb_write16(Adapter, REG_TBTT_PROHIBIT, 0xff04);
usb_write16(Adapter, REG_TSFTR_SYN_OFFSET, 0x7fff);/* +32767 (~32ms) */
/* reset TSF */
- rtw_write8(Adapter, REG_DUAL_TSF_RST, BIT(0));
+ usb_write8(Adapter, REG_DUAL_TSF_RST, BIT(0));
/* BIT3 - If set 0, hw will clr bcnq when tx becon ok/fail or port 0 */
- rtw_write8(Adapter, REG_MBID_NUM, rtw_read8(Adapter, REG_MBID_NUM) | BIT(3) | BIT(4));
+ usb_write8(Adapter, REG_MBID_NUM, rtw_read8(Adapter, REG_MBID_NUM) | BIT(3) | BIT(4));
/* enable BCN0 Function for if1 */
/* don't enable update TSF0 for if1 (due to TSF update when beacon/probe rsp are received) */
- rtw_write8(Adapter, REG_BCN_CTRL, (DIS_TSF_UDT0_NORMAL_CHIP|EN_BCN_FUNCTION | BIT(1)));
+ usb_write8(Adapter, REG_BCN_CTRL, (DIS_TSF_UDT0_NORMAL_CHIP|EN_BCN_FUNCTION | BIT(1)));
/* dis BCN1 ATIM WND if if2 is station */
- rtw_write8(Adapter, REG_BCN_CTRL_1, rtw_read8(Adapter, REG_BCN_CTRL_1) | BIT(0));
+ usb_write8(Adapter, REG_BCN_CTRL_1, rtw_read8(Adapter, REG_BCN_CTRL_1) | BIT(0));
}
}
reg_macid = REG_MACID;
for (idx = 0; idx < 6; idx++)
- rtw_write8(Adapter, (reg_macid+idx), val[idx]);
+ usb_write8(Adapter, (reg_macid+idx), val[idx]);
}
static void hw_var_set_bssid(struct adapter *Adapter, u8 variable, u8 *val)
reg_bssid = REG_BSSID;
for (idx = 0; idx < 6; idx++)
- rtw_write8(Adapter, (reg_bssid+idx), val[idx]);
+ usb_write8(Adapter, (reg_bssid+idx), val[idx]);
}
static void hw_var_set_bcn_func(struct adapter *Adapter, u8 variable, u8 *val)
bcn_ctrl_reg = REG_BCN_CTRL;
if (*((u8 *)val))
- rtw_write8(Adapter, bcn_ctrl_reg, (EN_BCN_FUNCTION | EN_TXBCN_RPT));
+ usb_write8(Adapter, bcn_ctrl_reg, (EN_BCN_FUNCTION | EN_TXBCN_RPT));
else
- rtw_write8(Adapter, bcn_ctrl_reg, rtw_read8(Adapter, bcn_ctrl_reg)&(~(EN_BCN_FUNCTION | EN_TXBCN_RPT)));
+ usb_write8(Adapter, bcn_ctrl_reg, rtw_read8(Adapter, bcn_ctrl_reg)&(~(EN_BCN_FUNCTION | EN_TXBCN_RPT)));
}
static void SetHwReg8188EU(struct adapter *Adapter, u8 variable, u8 *val)
val8 = rtw_read8(Adapter, MSR)&0x0c;
val8 |= *((u8 *)val);
- rtw_write8(Adapter, MSR, val8);
+ usb_write8(Adapter, MSR, val8);
}
break;
case HW_VAR_MEDIA_STATUS1:
val8 = rtw_read8(Adapter, MSR) & 0x03;
val8 |= *((u8 *)val) << 2;
- rtw_write8(Adapter, MSR, val8);
+ usb_write8(Adapter, MSR, val8);
}
break;
case HW_VAR_SET_OPMODE:
BrateCfg |= 0x01; /* default enable 1M ACK rate */
/* Set RRSR rate table. */
- rtw_write8(Adapter, REG_RRSR, BrateCfg & 0xff);
- rtw_write8(Adapter, REG_RRSR+1, (BrateCfg >> 8) & 0xff);
- rtw_write8(Adapter, REG_RRSR+2, rtw_read8(Adapter, REG_RRSR+2)&0xf0);
+ usb_write8(Adapter, REG_RRSR, BrateCfg & 0xff);
+ usb_write8(Adapter, REG_RRSR+1, (BrateCfg >> 8) & 0xff);
+ usb_write8(Adapter, REG_RRSR+2, rtw_read8(Adapter, REG_RRSR+2)&0xf0);
/* Set RTS initial rate */
while (BrateCfg > 0x1) {
RateIndex++;
}
/* Ziv - Check */
- rtw_write8(Adapter, REG_INIRTS_RATE_SEL, RateIndex);
+ usb_write8(Adapter, REG_INIRTS_RATE_SEL, RateIndex);
}
break;
case HW_VAR_TXPAUSE:
- rtw_write8(Adapter, REG_TXPAUSE, *((u8 *)val));
+ usb_write8(Adapter, REG_TXPAUSE, *((u8 *)val));
break;
case HW_VAR_BCN_FUNC:
hw_var_set_bcn_func(Adapter, variable, val);
StopTxBeacon(Adapter);
/* disable related TSF function */
- rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)&(~BIT(3)));
+ usb_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)&(~BIT(3)));
usb_write32(Adapter, REG_TSFTR, tsf);
usb_write32(Adapter, REG_TSFTR+4, tsf>>32);
/* enable related TSF function */
- rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(3));
+ usb_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(3));
if (((pmlmeinfo->state&0x03) == WIFI_FW_ADHOC_STATE) || ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE))
ResumeTxBeacon(Adapter);
usb_write16(Adapter, REG_RXFLTMAP2, 0x00);
/* reset TSF */
- rtw_write8(Adapter, REG_DUAL_TSF_RST, (BIT(0)|BIT(1)));
+ usb_write8(Adapter, REG_DUAL_TSF_RST, (BIT(0)|BIT(1)));
/* disable update TSF */
- rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(4));
+ usb_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(4));
break;
case HW_VAR_MLME_SITESURVEY:
if (*((u8 *)val)) { /* under sitesurvey */
usb_write16(Adapter, REG_RXFLTMAP2, 0x00);
/* disable update TSF */
- rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(4));
+ usb_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)|BIT(4));
} else { /* sitesurvey done */
struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv;
struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info);
usb_write16(Adapter, REG_RXFLTMAP2, 0xFFFF);
/* enable update TSF */
- rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)&(~BIT(4)));
+ usb_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)&(~BIT(4)));
} else if ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE) {
usb_write16(Adapter, REG_RXFLTMAP2, 0xFFFF);
/* enable update TSF */
- rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)&(~BIT(4)));
+ usb_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)&(~BIT(4)));
}
if ((pmlmeinfo->state&0x03) == WIFI_FW_AP_STATE) {
usb_write32(Adapter, REG_RCR, rtw_read32(Adapter, REG_RCR)|RCR_CBSSID_BCN);
} else if (type == 2) {
/* sta add event call back */
/* enable update TSF */
- rtw_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)&(~BIT(4)));
+ usb_write8(Adapter, REG_BCN_CTRL, rtw_read8(Adapter, REG_BCN_CTRL)&(~BIT(4)));
if (check_fwstate(pmlmepriv, WIFI_ADHOC_STATE|WIFI_ADHOC_MASTER_STATE))
RetryLimit = 0x7;
struct mlme_ext_priv *pmlmeext = &Adapter->mlmeextpriv;
struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info);
- rtw_write8(Adapter, REG_SLOT, val[0]);
+ usb_write8(Adapter, REG_SLOT, val[0]);
if (pmlmeinfo->WMM_enable == 0) {
if (pmlmeext->cur_wireless_mode == WIRELESS_11B)
u1bAIFS = aSifsTime + (2 * pmlmeinfo->slotTime);
/* <Roger_EXP> Temporary removed, 2008.06.20. */
- rtw_write8(Adapter, REG_EDCA_VO_PARAM, u1bAIFS);
- rtw_write8(Adapter, REG_EDCA_VI_PARAM, u1bAIFS);
- rtw_write8(Adapter, REG_EDCA_BE_PARAM, u1bAIFS);
- rtw_write8(Adapter, REG_EDCA_BK_PARAM, u1bAIFS);
+ usb_write8(Adapter, REG_EDCA_VO_PARAM, u1bAIFS);
+ usb_write8(Adapter, REG_EDCA_VI_PARAM, u1bAIFS);
+ usb_write8(Adapter, REG_EDCA_BE_PARAM, u1bAIFS);
+ usb_write8(Adapter, REG_EDCA_BK_PARAM, u1bAIFS);
}
}
break;
case HW_VAR_RESP_SIFS:
/* RESP_SIFS for CCK */
- rtw_write8(Adapter, REG_R2T_SIFS, val[0]); /* SIFS_T2T_CCK (0x08) */
- rtw_write8(Adapter, REG_R2T_SIFS+1, val[1]); /* SIFS_R2T_CCK(0x08) */
+ usb_write8(Adapter, REG_R2T_SIFS, val[0]); /* SIFS_T2T_CCK (0x08) */
+ usb_write8(Adapter, REG_R2T_SIFS+1, val[1]); /* SIFS_R2T_CCK(0x08) */
/* RESP_SIFS for OFDM */
- rtw_write8(Adapter, REG_T2T_SIFS, val[2]); /* SIFS_T2T_OFDM (0x0a) */
- rtw_write8(Adapter, REG_T2T_SIFS+1, val[3]); /* SIFS_R2T_OFDM(0x0a) */
+ usb_write8(Adapter, REG_T2T_SIFS, val[2]); /* SIFS_T2T_OFDM (0x0a) */
+ usb_write8(Adapter, REG_T2T_SIFS+1, val[3]); /* SIFS_R2T_OFDM(0x0a) */
break;
case HW_VAR_ACK_PREAMBLE:
{
if (bShortPreamble)
regTmp |= 0x80;
- rtw_write8(Adapter, REG_RRSR+2, regTmp);
+ usb_write8(Adapter, REG_RRSR+2, regTmp);
}
break;
case HW_VAR_SEC_CFG:
- rtw_write8(Adapter, REG_SECCFG, *((u8 *)val));
+ usb_write8(Adapter, REG_SECCFG, *((u8 *)val));
break;
case HW_VAR_DM_FLAG:
podmpriv->SupportAbility = *((u8 *)val);
AcmCtrl &= (~AcmHw_BeqEn);
DBG_88E("[HW_VAR_ACM_CTRL] Write 0x%X\n", AcmCtrl);
- rtw_write8(Adapter, REG_ACMHWCTRL, AcmCtrl);
+ usb_write8(Adapter, REG_ACMHWCTRL, AcmCtrl);
}
break;
case HW_VAR_AMPDU_MIN_SPACE:
}
if (MinSpacingToSet < SecMinSpace)
MinSpacingToSet = SecMinSpace;
- rtw_write8(Adapter, REG_AMPDU_MIN_SPACE, (rtw_read8(Adapter, REG_AMPDU_MIN_SPACE) & 0xf8) | MinSpacingToSet);
+ usb_write8(Adapter, REG_AMPDU_MIN_SPACE, (rtw_read8(Adapter, REG_AMPDU_MIN_SPACE) & 0xf8) | MinSpacingToSet);
}
}
break;
if ((pRegToSet[index] & 0x0f) > FactorToSet)
pRegToSet[index] = (pRegToSet[index] & 0xf0) | (FactorToSet);
- rtw_write8(Adapter, (REG_AGGLEN_LMT+index), pRegToSet[index]);
+ usb_write8(Adapter, (REG_AGGLEN_LMT+index), pRegToSet[index]);
}
}
}
u8 threshold = *((u8 *)val);
if (threshold == 0)
threshold = haldata->UsbRxAggPageCount;
- rtw_write8(Adapter, REG_RXDMA_AGG_PG_TH, threshold);
+ usb_write8(Adapter, REG_RXDMA_AGG_PG_TH, threshold);
}
break;
case HW_VAR_SET_RPWM:
u8 trycnt = 100;
/* pause tx */
- rtw_write8(Adapter, REG_TXPAUSE, 0xff);
+ usb_write8(Adapter, REG_TXPAUSE, 0xff);
/* keep sn */
Adapter->xmitpriv.nqos_ssn = rtw_read16(Adapter, REG_NQOS_SEQ);
{
u8 maxMacid = *val;
DBG_88E("### MacID(%d),Set Max Tx RPT MID(%d)\n", maxMacid, maxMacid+1);
- rtw_write8(Adapter, REG_TX_RPT_CTRL+1, maxMacid+1);
+ usb_write8(Adapter, REG_TX_RPT_CTRL+1, maxMacid+1);
}
break;
case HW_VAR_H2C_MEDIA_STATUS_RPT:
break;
case HW_VAR_BCN_VALID:
/* BCN_VALID, BIT16 of REG_TDECTRL = BIT0 of REG_TDECTRL+2, write 1 to clear, Clear by sw */
- rtw_write8(Adapter, REG_TDECTRL+2, rtw_read8(Adapter, REG_TDECTRL+2) | BIT0);
+ usb_write8(Adapter, REG_TDECTRL+2, rtw_read8(Adapter, REG_TDECTRL+2) | BIT0);
break;
default:
break;
/* BCN interval */
usb_write16(adapt, REG_BCN_INTERVAL, pmlmeinfo->bcn_interval);
- rtw_write8(adapt, REG_ATIMWND, 0x02);/* 2ms */
+ usb_write8(adapt, REG_ATIMWND, 0x02);/* 2ms */
_InitBeaconParameters(adapt);
- rtw_write8(adapt, REG_SLOT, 0x09);
+ usb_write8(adapt, REG_SLOT, 0x09);
value32 = rtw_read32(adapt, REG_TCR);
value32 &= ~TSFRST;
usb_write32(adapt, REG_TCR, value32);
/* NOTE: Fix test chip's bug (about contention windows's randomness) */
- rtw_write8(adapt, REG_RXTSF_OFFSET_CCK, 0x50);
- rtw_write8(adapt, REG_RXTSF_OFFSET_OFDM, 0x50);
+ usb_write8(adapt, REG_RXTSF_OFFSET_CCK, 0x50);
+ usb_write8(adapt, REG_RXTSF_OFFSET_OFDM, 0x50);
_BeaconFunctionEnable(adapt, true, true);
ResumeTxBeacon(adapt);
- rtw_write8(adapt, bcn_ctrl_reg, rtw_read8(adapt, bcn_ctrl_reg)|BIT(1));
+ usb_write8(adapt, bcn_ctrl_reg, rtw_read8(adapt, bcn_ctrl_reg)|BIT(1));
}
static void rtl8188eu_init_default_value(struct adapter *adapt)
return le32_to_cpu(data);
}
-static int usb_write8(struct adapter *adapter, u32 addr, u8 val)
+int usb_write8(struct adapter *adapter, u32 addr, u8 val)
{
u8 request;
u8 requesttype;
pops->_read8 = &usb_read8;
pops->_read16 = &usb_read16;
pops->_read32 = &usb_read32;
- pops->_write8 = &usb_write8;
}
u8 (*_read8)(struct adapter *pintfhdl, u32 addr);
u16 (*_read16)(struct adapter *pintfhdl, u32 addr);
u32 (*_read32)(struct adapter *pintfhdl, u32 addr);
- int (*_write8)(struct adapter *pintfhdl, u32 addr, u8 val);
};
struct io_req {
u32 usb_read_port(struct adapter *adapter, u32 addr, u32 cnt, u8 *pmem);
void usb_read_port_cancel(struct adapter *adapter);
-int _rtw_write8(struct adapter *adapter, u32 addr, u8 val);
+int usb_write8(struct adapter *adapter, u32 addr, u8 val);
int usb_write16(struct adapter *adapter, u32 addr, u16 val);
int usb_write32(struct adapter *adapter, u32 addr, u32 val);
int usb_writeN(struct adapter *adapter, u32 addr, u32 length, u8 *pdata);
#define rtw_read16(adapter, addr) _rtw_read16((adapter), (addr))
#define rtw_read32(adapter, addr) _rtw_read32((adapter), (addr))
-#define rtw_write8(adapter, addr, val) \
- _rtw_write8((adapter), (addr), (val))
-
int rtw_init_io_priv(struct adapter *padapter,
void (*set_intf_ops)(struct _io_ops *pops));
switch (bytes) {
case 1:
- rtw_write8(padapter, addr, (u8)data32);
+ usb_write8(padapter, addr, (u8)data32);
DBG_88E(KERN_INFO "%s: addr = 0x%08X data = 0x%02X\n", __func__, addr, (u8)data32);
break;
case 2:
RegRWStruct = (struct mp_rw_reg *)pdata;
switch (RegRWStruct->width) {
case 1:
- rtw_write8(padapter, RegRWStruct->offset, (u8)RegRWStruct->value);
+ usb_write8(padapter, RegRWStruct->offset, (u8)RegRWStruct->value);
break;
case 2:
usb_write16(padapter, RegRWStruct->offset, (u16)RegRWStruct->value);
case 0x71:/* write_reg */
switch (minor_cmd) {
case 1:
- rtw_write8(padapter, arg, extra_arg);
- DBG_88E("rtw_write8(0x%x) = 0x%02x\n", arg, rtw_read8(padapter, arg));
+ usb_write8(padapter, arg, extra_arg);
+ DBG_88E("usb_write8(0x%x) = 0x%02x\n", arg, rtw_read8(padapter, arg));
break;
case 2:
usb_write16(padapter, arg, extra_arg);
break;
case 0xfd:
- rtw_write8(padapter, 0xc50, arg);
+ usb_write8(padapter, 0xc50, arg);
DBG_88E("wr(0xc50) = 0x%x\n", rtw_read8(padapter, 0xc50));
- rtw_write8(padapter, 0xc58, arg);
+ usb_write8(padapter, 0xc58, arg);
DBG_88E("wr(0xc58) = 0x%x\n", rtw_read8(padapter, 0xc58));
break;
case 0xfe:
ret = -EINVAL;
break;
}
- rtw_write8(padapter, addr, data);
+ usb_write8(padapter, addr, data);
break;
case 'w':
/* 2 bytes */
projects / platform / kernel / linux-exynos.git / commitdiff