ACPI: docs: enumeration: Fix a few typos and wording mistakes

"sturct" -> "struct"
"similar than with" -> "similar to"
Missing comma, "it" and "to"

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

diff --git a/Documentation/firmware-guide/acpi/enumeration.rst b/Documentation/firmware-guide/acpi/enumeration.rst
index dbb0302..b9dc0c6 100644 (file)
--- a/Documentation/firmware-guide/acpi/enumeration.rst
+++ b/Documentation/firmware-guide/acpi/enumeration.rst
@@ -21,7 +21,7 @@ possible we decided to do following:
   - Devices behind real busses where there is a connector resource
     are represented as struct spi_device or struct i2c_device. Note
     that standard UARTs are not busses so there is no struct uart_device,
-    although some of them may be represented by sturct serdev_device.
+    although some of them may be represented by struct serdev_device.
 
 As both ACPI and Device Tree represent a tree of devices (and their
 resources) this implementation follows the Device Tree way as much as
@@ -205,7 +205,7 @@ Here is what the ACPI namespace for a SPI slave might look like::
                }
                ...
 
-The SPI device drivers only need to add ACPI IDs in a similar way than with
+The SPI device drivers only need to add ACPI IDs in a similar way to
 the platform device drivers. Below is an example where we add ACPI support
 to at25 SPI eeprom driver (this is meant for the above ACPI snippet)::
 
@@ -362,7 +362,7 @@ These GPIO numbers are controller relative and path "\\_SB.PCI0.GPI0"
 specifies the path to the controller. In order to use these GPIOs in Linux
 we need to translate them to the corresponding Linux GPIO descriptors.
 
-There is a standard GPIO API for that and is documented in
+There is a standard GPIO API for that and it is documented in
 Documentation/admin-guide/gpio/.
 
 In the above example we can get the corresponding two GPIO descriptors with
@@ -538,8 +538,8 @@ information.
 PCI hierarchy representation
 ============================
 
-Sometimes could be useful to enumerate a PCI device, knowing its position on the
-PCI bus.
+Sometimes it could be useful to enumerate a PCI device, knowing its position on
+the PCI bus.
 
 For example, some systems use PCI devices soldered directly on the mother board,
 in a fixed position (ethernet, Wi-Fi, serial ports, etc.). In this conditions it
@@ -550,7 +550,7 @@ To identify a PCI device, a complete hierarchical description is required, from
 the chipset root port to the final device, through all the intermediate
 bridges/switches of the board.
 
-For example, let us assume to have a system with a PCIe serial port, an
+For example, let's assume we have a system with a PCIe serial port, an
 Exar XR17V3521, soldered on the main board. This UART chip also includes
 16 GPIOs and we want to add the property ``gpio-line-names`` [1] to these pins.
 In this case, the ``lspci`` output for this component is::
@@ -593,8 +593,8 @@ of the chipset bridge (also called "root port") with address::
 
        Bus: 0 - Device: 14 - Function: 1
 
-To find this information is necessary disassemble the BIOS ACPI tables, in
-particular the DSDT (see also [2])::
+To find this information, it is necessary to disassemble the BIOS ACPI tables,
+in particular the DSDT (see also [2])::
 
        mkdir ~/tables/
        cd ~/tables/