pinctrl: ssbi-gpio: Fix pm8xxx_pin_config_get() to be compliant
authorDouglas Anderson <dianders@chromium.org>
Thu, 30 Aug 2018 15:23:38 +0000 (08:23 -0700)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Tue, 13 Nov 2018 19:08:29 +0000 (11:08 -0800)
[ Upstream commit b432414b996d32a1bd9afe2bd595bd5729c1477f ]

If you look at "pinconf-groups" in debugfs for ssbi-gpio you'll notice
it looks like nonsense.

The problem is fairly well described in commit 1cf86bc21257 ("pinctrl:
qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant") and
commit 05e0c828955c ("pinctrl: msm: Fix msm_config_group_get() to be
compliant"), but it was pointed out that ssbi-gpio has the same
problem.  Let's fix it there too.

Fixes: b4c45fe974bc ("pinctrl: qcom: ssbi: Family A gpio & mpp drivers")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c

index f53e32a..0e153ba 100644 (file)
@@ -260,22 +260,32 @@ static int pm8xxx_pin_config_get(struct pinctrl_dev *pctldev,
 
        switch (param) {
        case PIN_CONFIG_BIAS_DISABLE:
-               arg = pin->bias == PM8XXX_GPIO_BIAS_NP;
+               if (pin->bias != PM8XXX_GPIO_BIAS_NP)
+                       return -EINVAL;
+               arg = 1;
                break;
        case PIN_CONFIG_BIAS_PULL_DOWN:
-               arg = pin->bias == PM8XXX_GPIO_BIAS_PD;
+               if (pin->bias != PM8XXX_GPIO_BIAS_PD)
+                       return -EINVAL;
+               arg = 1;
                break;
        case PIN_CONFIG_BIAS_PULL_UP:
-               arg = pin->bias <= PM8XXX_GPIO_BIAS_PU_1P5_30;
+               if (pin->bias > PM8XXX_GPIO_BIAS_PU_1P5_30)
+                       return -EINVAL;
+               arg = 1;
                break;
        case PM8XXX_QCOM_PULL_UP_STRENGTH:
                arg = pin->pull_up_strength;
                break;
        case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
-               arg = pin->disable;
+               if (!pin->disable)
+                       return -EINVAL;
+               arg = 1;
                break;
        case PIN_CONFIG_INPUT_ENABLE:
-               arg = pin->mode == PM8XXX_GPIO_MODE_INPUT;
+               if (pin->mode != PM8XXX_GPIO_MODE_INPUT)
+                       return -EINVAL;
+               arg = 1;
                break;
        case PIN_CONFIG_OUTPUT:
                if (pin->mode & PM8XXX_GPIO_MODE_OUTPUT)
@@ -290,10 +300,14 @@ static int pm8xxx_pin_config_get(struct pinctrl_dev *pctldev,
                arg = pin->output_strength;
                break;
        case PIN_CONFIG_DRIVE_PUSH_PULL:
-               arg = !pin->open_drain;
+               if (pin->open_drain)
+                       return -EINVAL;
+               arg = 1;
                break;
        case PIN_CONFIG_DRIVE_OPEN_DRAIN:
-               arg = pin->open_drain;
+               if (!pin->open_drain)
+                       return -EINVAL;
+               arg = 1;
                break;
        default:
                return -EINVAL;