F: arch/m68k/kernel/*sun3*
F: arch/m68k/sun3*/
F: arch/m68k/include/asm/sun3*
+F: drivers/net/ethernet/i825xx/sun3*
SUPERH
M: Paul Mundt <lethal@linux-sh.org>
This driver supporting CPUs are:
- SH7710, SH7712, SH7763, SH7619, SH7724, and SH7757.
-config HAPPYMEAL
- tristate "Sun Happy Meal 10/100baseT support"
- depends on SBUS || PCI
- select CRC32
- help
- This driver supports the "hme" interface present on most Ultra
- systems and as an option on older Sbus systems. This driver supports
- both PCI and Sbus devices. This driver also supports the "qfe" quad
- 100baseT device available in both PCI and Sbus configurations.
-
- To compile this driver as a module, choose M here: the module
- will be called sunhme.
-
-config SUNBMAC
- tristate "Sun BigMAC 10/100baseT support (EXPERIMENTAL)"
- depends on SBUS && EXPERIMENTAL
- select CRC32
- help
- This driver supports the "be" interface available as an Sbus option.
- This is Sun's older 100baseT Ethernet device.
-
- To compile this driver as a module, choose M here: the module
- will be called sunbmac.
-
-config SUNQE
- tristate "Sun QuadEthernet support"
- depends on SBUS
- select CRC32
- help
- This driver supports the "qe" 10baseT Ethernet device, available as
- an Sbus option. Note that this is not the same as Quad FastEthernet
- "qfe" which is supported by the Happy Meal driver instead.
-
- To compile this driver as a module, choose M here: the module
- will be called sunqe.
-
-config SUNGEM
- tristate "Sun GEM support"
- depends on PCI
- select CRC32
- help
- Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0. See also
- <http://www.sun.com/products-n-solutions/hardware/docs/pdf/806-3985-10.pdf>.
-
-config CASSINI
- tristate "Sun Cassini support"
- depends on PCI
- select CRC32
- help
- Support for the Sun Cassini chip, aka Sun GigaSwift Ethernet. See also
- <http://www.sun.com/products-n-solutions/hardware/docs/pdf/817-4341-10.pdf>
-
-config SUNVNET
- tristate "Sun Virtual Network support"
- depends on SUN_LDOMS
- help
- Support for virtual network devices under Sun Logical Domains.
-
config BFIN_MAC
tristate "Blackfin on-chip MAC support"
depends on NET_ETHERNET && (BF516 || BF518 || BF526 || BF527 || BF536 || BF537)
driver. DCA is a method for warming the CPU cache before data
is used, with the intent of lessening the impact of cache misses.
-config NIU
- tristate "Sun Neptune 10Gbit Ethernet support"
- depends on PCI
- select CRC32
- help
- This enables support for cards based upon Sun's
- Neptune chipset.
-
config PASEMI_MAC
tristate "PA Semi 1/10Gbit MAC"
depends on PPC_PASEMI && PCI && INET
obj-$(CONFIG_ROADRUNNER) += rrunner.o
-obj-$(CONFIG_HAPPYMEAL) += sunhme.o
-obj-$(CONFIG_SUNQE) += sunqe.o
-obj-$(CONFIG_SUNBMAC) += sunbmac.o
-obj-$(CONFIG_SUNGEM) += sungem.o sungem_phy.o
-obj-$(CONFIG_CASSINI) += cassini.o
-obj-$(CONFIG_SUNVNET) += sunvnet.o
-
obj-$(CONFIG_MACE) += mace.o
obj-$(CONFIG_BMAC) += bmac.o
obj-$(CONFIG_NS83820) += ns83820.o
obj-$(CONFIG_FEALNX) += fealnx.o
spidernet-y += spider_net.o spider_net_ethtool.o
-obj-$(CONFIG_SPIDER_NET) += spidernet.o sungem_phy.o
+obj-$(CONFIG_SPIDER_NET) += spidernet.o ethernet/sun/sungem_phy.o
obj-$(CONFIG_GELIC_NET) += ps3_gelic.o
gelic_wireless-$(CONFIG_GELIC_WIRELESS) += ps3_gelic_wireless.o
ps3_gelic-objs += ps3_gelic_net.o $(gelic_wireless-y)
obj-$(CONFIG_FS_ENET) += fs_enet/
-obj-$(CONFIG_NIU) += niu.o
obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
obj-$(CONFIG_SFC) += sfc/
source "drivers/net/ethernet/qlogic/Kconfig"
source "drivers/net/ethernet/racal/Kconfig"
source "drivers/net/ethernet/smsc/Kconfig"
+source "drivers/net/ethernet/sun/Kconfig"
endif # ETHERNET
obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/
+obj-$(CONFIG_NET_VENDOR_SUN) += sun/
--- /dev/null
+#
+# Sun network device configuration
+#
+
+config NET_VENDOR_SUN
+ bool "Sun devices"
+ depends on SUN3 || SBUS || PCI || SUN_LDOMS
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say
+ Y and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Sun network interfaces. If you say Y, you will be
+ asked for your specific card in the following questions.
+
+if NET_VENDOR_SUN
+
+config HAPPYMEAL
+ tristate "Sun Happy Meal 10/100baseT support"
+ depends on (SBUS || PCI)
+ select CRC32
+ ---help---
+ This driver supports the "hme" interface present on most Ultra
+ systems and as an option on older Sbus systems. This driver supports
+ both PCI and Sbus devices. This driver also supports the "qfe" quad
+ 100baseT device available in both PCI and Sbus configurations.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sunhme.
+
+config SUNBMAC
+ tristate "Sun BigMAC 10/100baseT support (EXPERIMENTAL)"
+ depends on SBUS && EXPERIMENTAL
+ select CRC32
+ ---help---
+ This driver supports the "be" interface available as an Sbus option.
+ This is Sun's older 100baseT Ethernet device.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sunbmac.
+
+config SUNQE
+ tristate "Sun QuadEthernet support"
+ depends on SBUS
+ select CRC32
+ ---help---
+ This driver supports the "qe" 10baseT Ethernet device, available as
+ an Sbus option. Note that this is not the same as Quad FastEthernet
+ "qfe" which is supported by the Happy Meal driver instead.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sunqe.
+
+config SUNGEM
+ tristate "Sun GEM support"
+ depends on PCI
+ select CRC32
+ ---help---
+ Support for the Sun GEM chip, aka Sun GigabitEthernet/P 2.0. See also
+ <http://www.sun.com/products-n-solutions/hardware/docs/pdf/806-3985-10.pdf>.
+
+config CASSINI
+ tristate "Sun Cassini support"
+ depends on PCI
+ select CRC32
+ ---help---
+ Support for the Sun Cassini chip, aka Sun GigaSwift Ethernet. See also
+ <http://www.sun.com/products-n-solutions/hardware/docs/pdf/817-4341-10.pdf>
+
+config SUNVNET
+ tristate "Sun Virtual Network support"
+ depends on SUN_LDOMS
+ ---help---
+ Support for virtual network devices under Sun Logical Domains.
+
+config NIU
+ tristate "Sun Neptune 10Gbit Ethernet support"
+ depends on PCI
+ select CRC32
+ ---help---
+ This enables support for cards based upon Sun's
+ Neptune chipset.
+
+endif # NET_VENDOR_SUN
--- /dev/null
+#
+# Makefile for the Sun network device drivers.
+#
+
+obj-$(CONFIG_HAPPYMEAL) += sunhme.o
+obj-$(CONFIG_SUNQE) += sunqe.o
+obj-$(CONFIG_SUNBMAC) += sunbmac.o
+obj-$(CONFIG_SUNGEM) += sungem.o sungem_phy.o
+obj-$(CONFIG_CASSINI) += cassini.o
+obj-$(CONFIG_SUNVNET) += sunvnet.o
+obj-$(CONFIG_NIU) += niu.o
#define VERSION "2.0 B"
-#include "sungem_phy.h"
+#include "./ethernet/sun/sungem_phy.h"
extern int spider_net_stop(struct net_device *netdev);
extern int spider_net_open(struct net_device *netdev);
projects / platform / kernel / linux-exynos.git / commitdiff