[media] docs-rst: v4l2-drivers book: adjust column margins

A few tables are not properly output on LaTeX format.

Fix them.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

diff --git a/Documentation/media/v4l-drivers/cpia2.rst b/Documentation/media/v4l-drivers/cpia2.rst
index 763705c..b512501 100644 (file)
--- a/Documentation/media/v4l-drivers/cpia2.rst
+++ b/Documentation/media/v4l-drivers/cpia2.rst
@@ -55,6 +55,9 @@ may be done automatically by your distribution.
 Driver options
 ~~~~~~~~~~~~~~
 
+.. tabularcolumns:: |p{13ex}|L|
+
+
 ==============  ========================================================
 Option         Description
 ==============  ========================================================

diff --git a/Documentation/media/v4l-drivers/si476x.rst b/Documentation/media/v4l-drivers/si476x.rst
index d5c07bb..6775125 100644 (file)
--- a/Documentation/media/v4l-drivers/si476x.rst
+++ b/Documentation/media/v4l-drivers/si476x.rst
@@ -31,31 +31,33 @@ The drivers exposes following files:
   information. The contents of the file is binary data of the
   following layout:
 
+  .. tabularcolumns:: |p{7ex}|p{12ex}|L|
+
   =============  ==============   ====================================
-  Offset         Name            Description
+  Offset        Name             Description
   =============  ==============   ====================================
-  0x00           blend_int       Flag, set when stereo separation has
+  0x00          blend_int        Flag, set when stereo separation has
                                  crossed below the blend threshold
-  0x01           hblend_int      Flag, set when HiBlend cutoff
+  0x01          hblend_int       Flag, set when HiBlend cutoff
                                  frequency is lower than threshold
-  0x02           hicut_int       Flag, set when HiCut cutoff
+  0x02          hicut_int        Flag, set when HiCut cutoff
                                  frequency is lower than threshold
-  0x03           chbw_int        Flag, set when channel filter
+  0x03          chbw_int         Flag, set when channel filter
                                  bandwidth is less than threshold
-  0x04           softmute_int    Flag indicating that softmute
+  0x04          softmute_int     Flag indicating that softmute
                                  attenuation has increased above
                                  softmute threshold
   0x05          smute            0 - Audio is not soft muted
                                  1 - Audio is soft muted
-  0x06           smattn          Soft mute attenuation level in dB
-  0x07           chbw            Channel filter bandwidth in kHz
-  0x08           hicut           HiCut cutoff frequency in units of
+  0x06          smattn           Soft mute attenuation level in dB
+  0x07          chbw             Channel filter bandwidth in kHz
+  0x08          hicut            HiCut cutoff frequency in units of
                                  100Hz
-  0x09           hiblend         HiBlend cutoff frequency in units
+  0x09          hiblend          HiBlend cutoff frequency in units
                                  of 100 Hz
-  0x10           pilot           0 - Stereo pilot is not present
+  0x10          pilot            0 - Stereo pilot is not present
                                  1 - Stereo pilot is present
-  0x11           stblend         Stereo blend in %
+  0x11          stblend          Stereo blend in %
   =============  ==============   ====================================
 
 
@@ -63,12 +65,14 @@ The drivers exposes following files:
   This file contains statistics about RDS receptions. It's binary data
   has the following layout:
 
+  .. tabularcolumns:: |p{7ex}|p{12ex}|L|
+
   =============  ==============   ====================================
-  Offset         Name            Description
+  Offset        Name             Description
   =============  ==============   ====================================
-  0x00           expected        Number of expected RDS blocks
-  0x02           received        Number of received RDS blocks
-  0x04           uncorrectable   Number of uncorrectable RDS blocks
+  0x00          expected         Number of expected RDS blocks
+  0x02          received         Number of received RDS blocks
+  0x04          uncorrectable    Number of uncorrectable RDS blocks
   =============  ==============   ====================================
 
 * /sys/kernel/debug/<device-name>/agc
@@ -77,21 +81,23 @@ The drivers exposes following files:
 
   The layout is:
 
+  .. tabularcolumns:: |p{7ex}|p{12ex}|L|
+
   =============  ==============   ====================================
-  Offset         Name            Description
+  Offset        Name             Description
   =============  ==============   ====================================
-  0x00           mxhi            0 - FM Mixer PD high threshold is
+  0x00          mxhi             0 - FM Mixer PD high threshold is
                                  not tripped
                                  1 - FM Mixer PD high threshold is
                                  tripped
-  0x01           mxlo            ditto for FM Mixer PD low
-  0x02           lnahi           ditto for FM LNA PD high
-  0x03           lnalo           ditto for FM LNA PD low
-  0x04           fmagc1          FMAGC1 attenuator resistance
+  0x01          mxlo             ditto for FM Mixer PD low
+  0x02          lnahi            ditto for FM LNA PD high
+  0x03          lnalo            ditto for FM LNA PD low
+  0x04          fmagc1           FMAGC1 attenuator resistance
                                  (see datasheet for more detail)
-  0x05           fmagc2          ditto for FMAGC2
-  0x06           pgagain         PGA gain in dB
-  0x07           fmwblang        FM/WB LNA Gain in dB
+  0x05          fmagc2           ditto for FMAGC2
+  0x06          pgagain          PGA gain in dB
+  0x07          fmwblang         FM/WB LNA Gain in dB
   =============  ==============   ====================================
 
 * /sys/kernel/debug/<device-name>/rsq
@@ -100,48 +106,50 @@ The drivers exposes following files:
 
   The layout is:
 
+  .. tabularcolumns:: |p{7ex}|p{12ex}|p{60ex}|
+
   =============  ==============   ====================================
-  Offset         Name            Description
+  Offset        Name             Description
   =============  ==============   ====================================
-  0x00           multhint        0 - multipath value has not crossed
+  0x00          multhint         0 - multipath value has not crossed
                                  the Multipath high threshold
                                  1 - multipath value has crossed
                                  the Multipath high threshold
-  0x01           multlint        ditto for Multipath low threshold
-  0x02           snrhint         0 - received signal's SNR has not
+  0x01          multlint         ditto for Multipath low threshold
+  0x02          snrhint          0 - received signal's SNR has not
                                  crossed high threshold
                                  1 - received signal's SNR has
                                  crossed high threshold
-  0x03           snrlint         ditto for low threshold
-  0x04           rssihint        ditto for RSSI high threshold
-  0x05           rssilint        ditto for RSSI low threshold
-  0x06           bltf            Flag indicating if seek command
+  0x03          snrlint          ditto for low threshold
+  0x04          rssihint         ditto for RSSI high threshold
+  0x05          rssilint         ditto for RSSI low threshold
+  0x06          bltf             Flag indicating if seek command
                                  reached/wrapped seek band limit
-  0x07           snr_ready       Indicates that SNR metrics is ready
-  0x08           rssiready       ditto for RSSI metrics
-  0x09           injside         0 - Low-side injection is being used
+  0x07          snr_ready        Indicates that SNR metrics is ready
+  0x08          rssiready        ditto for RSSI metrics
+  0x09          injside          0 - Low-side injection is being used
                                  1 - High-side injection is used
-  0x10           afcrl           Flag indicating if AFC rails
-  0x11           valid           Flag indicating if channel is valid
-  0x12           readfreq        Current tuned frequency
-  0x14           freqoff         Signed frequency offset in units of
+  0x10          afcrl            Flag indicating if AFC rails
+  0x11          valid            Flag indicating if channel is valid
+  0x12          readfreq         Current tuned frequency
+  0x14          freqoff          Signed frequency offset in units of
                                  2ppm
-  0x15           rssi            Signed value of RSSI in dBuV
-  0x16           snr             Signed RF SNR in dB
-  0x17           issi            Signed Image Strength Signal
+  0x15          rssi             Signed value of RSSI in dBuV
+  0x16          snr              Signed RF SNR in dB
+  0x17          issi             Signed Image Strength Signal
                                  indicator
-  0x18           lassi           Signed Low side adjacent Channel
+  0x18          lassi            Signed Low side adjacent Channel
                                  Strength indicator
-  0x19           hassi           ditto fpr High side
-  0x20           mult            Multipath indicator
-  0x21           dev             Frequency deviation
-  0x24           assi            Adjacent channel SSI
-  0x25           usn             Ultrasonic noise indicator
-  0x26           pilotdev        Pilot deviation in units of 100 Hz
-  0x27           rdsdev          ditto for RDS
-  0x28           assidev         ditto for ASSI
-  0x29           strongdev       Frequency deviation
-  0x30           rdspi           RDS PI code
+  0x19          hassi            ditto fpr High side
+  0x20          mult             Multipath indicator
+  0x21          dev              Frequency deviation
+  0x24          assi             Adjacent channel SSI
+  0x25          usn              Ultrasonic noise indicator
+  0x26          pilotdev         Pilot deviation in units of 100 Hz
+  0x27          rdsdev           ditto for RDS
+  0x28          assidev          ditto for ASSI
+  0x29          strongdev        Frequency deviation
+  0x30          rdspi            RDS PI code
   =============  ==============   ====================================
 
 * /sys/kernel/debug/<device-name>/rsq_primary