[ Upstream commit
eb002726fac7cefb98ff39ddb89e150a1c24fe85 ]
The xHCI spec doesn't specify the upper bound of U3 transition time. For
some devices 20ms is not enough, so we need to make sure the link state
is in U3 before further actions.
I've tried to use U3 Entry Capability by setting U3 Entry Enable in
config register, however the port change event for U3 transition
interrupts the system suspend process.
For now let's use the less ideal method by polling PLS.
[use usleep_range(), and shorten the delay time while polling -Mathias]
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20200312144517.1593-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
xhci_set_link_state(xhci, ports[wIndex], link_state);
spin_unlock_irqrestore(&xhci->lock, flags);
- msleep(20); /* wait device to enter */
+ if (link_state == USB_SS_PORT_LS_U3) {
+ int retries = 16;
+
+ while (retries--) {
+ usleep_range(4000, 8000);
+ temp = readl(ports[wIndex]->addr);
+ if ((temp & PORT_PLS_MASK) == XDEV_U3)
+ break;
+ }
+ }
spin_lock_irqsave(&xhci->lock, flags);
temp = readl(ports[wIndex]->addr);