# Copyright (C) 2010 pulseaudio
# This file is distributed under the same license as the pulseaudio package.
# Leonid Kurbatov <llenchikk@rambler.ru>, 2010.
-#
-#
+#
+#
msgid ""
msgstr ""
"Project-Id-Version: pulseaudio.master-tx\n"
#: ../src/modules/alsa/alsa-util.c:1106
#, c-format
msgid ""
-"snd_pcm_avail() returned a value that is exceptionally large: %lu bytes (%lu "
-"ms).\n"
-"Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
-"to the ALSA developers."
+"snd_pcm_avail() returned a value that is exceptionally large: %lu bytes (%lu ms).\n"
+"Most likely this is a bug in the ALSA driver '%s'. Please report this issue to the ALSA developers."
msgstr ""
+"snd_pcm_avail() возвращает значение, которое является исключительно большим: %lu байт (%lu мс).\n"
+"Вероятно, это ошибка в драйвере ALSA '%s'. Пожалуйста, сообщите об этой проблеме разработчикам ALSA."
#: ../src/modules/alsa/alsa-util.c:1147
#, c-format
msgid ""
-"snd_pcm_delay() returned a value that is exceptionally large: %li bytes (%s%"
-"lu ms).\n"
-"Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
-"to the ALSA developers."
+"snd_pcm_delay() returned a value that is exceptionally large: %li bytes (%s%lu ms).\n"
+"Most likely this is a bug in the ALSA driver '%s'. Please report this issue to the ALSA developers."
msgstr ""
#: ../src/modules/alsa/alsa-util.c:1194
#, c-format
msgid ""
-"snd_pcm_mmap_begin() returned a value that is exceptionally large: %lu bytes "
-"(%lu ms).\n"
-"Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
-"to the ALSA developers."
+"snd_pcm_mmap_begin() returned a value that is exceptionally large: %lu bytes (%lu ms).\n"
+"Most likely this is a bug in the ALSA driver '%s'. Please report this issue to the ALSA developers."
msgstr ""
#: ../src/modules/module-always-sink.c:39
msgstr ""
#: ../src/modules/module-ladspa-sink.c:53
-msgid ""
-"sink_name=<name for the sink> sink_properties=<properties for the sink> "
-"master=<name of sink to filter> format=<sample format> rate=<sample rate> "
-"channels=<number of channels> channel_map=<channel map> plugin=<ladspa "
-"plugin name> label=<ladspa plugin label> control=<comma seperated list of "
-"input control values>"
+msgid "sink_name=<name for the sink> sink_properties=<properties for the sink> master=<name of sink to filter> format=<sample format> rate=<sample rate> channels=<number of channels> channel_map=<channel map> plugin=<ladspa plugin name> label=<ladspa plugin label> control=<comma seperated list of input control values>"
msgstr ""
#: ../src/modules/module-null-sink.c:55
msgstr ""
#: ../src/daemon/main.c:571
-msgid ""
-"This program is not intended to be run as root (unless --system is "
-"specified)."
+msgid "This program is not intended to be run as root (unless --system is specified)."
msgstr ""
#: ../src/daemon/main.c:573
#: ../src/daemon/main.c:792
msgid ""
-"OK, so you are running PA in system mode. Please note that you most likely "
-"shouldn't be doing that.\n"
-"If you do it nonetheless then it's your own fault if things don't work as "
-"expected.\n"
-"Please read http://pulseaudio.org/wiki/WhatIsWrongWithSystemMode for an "
-"explanation why system mode is usually a bad idea."
+"OK, so you are running PA in system mode. Please note that you most likely shouldn't be doing that.\n"
+"If you do it nonetheless then it's your own fault if things don't work as expected.\n"
+"Please read http://pulseaudio.org/wiki/WhatIsWrongWithSystemMode for an explanation why system mode is usually a bad idea."
msgstr ""
#: ../src/daemon/main.c:809
msgstr ""
#: ../src/daemon/main.c:821
-msgid ""
-"Dude, your kernel stinks! The chef's recommendation today is Linux with high-"
-"resolution timers enabled!"
+msgid "Dude, your kernel stinks! The chef's recommendation today is Linux with high-resolution timers enabled!"
msgstr ""
#: ../src/daemon/main.c:844
" --dump-conf Dump default configuration\n"
" --dump-modules Dump list of available modules\n"
" --dump-resample-methods Dump available resample methods\n"
-" --cleanup-shm Cleanup stale shared memory "
-"segments\n"
-" --start Start the daemon if it is not "
-"running\n"
+" --cleanup-shm Cleanup stale shared memory segments\n"
+" --start Start the daemon if it is not running\n"
" -k --kill Kill a running daemon\n"
-" --check Check for a running daemon (only "
-"returns exit code)\n"
+" --check Check for a running daemon (only returns exit code)\n"
"\n"
"OPTIONS:\n"
" --system[=BOOL] Run as system-wide instance\n"
" -D, --daemonize[=BOOL] Daemonize after startup\n"
" --fail[=BOOL] Quit when startup fails\n"
" --high-priority[=BOOL] Try to set high nice level\n"
-" (only available as root, when SUID "
-"or\n"
+" (only available as root, when SUID or\n"
" with elevated RLIMIT_NICE)\n"
" --realtime[=BOOL] Try to enable realtime scheduling\n"
-" (only available as root, when SUID "
-"or\n"
+" (only available as root, when SUID or\n"
" with elevated RLIMIT_RTPRIO)\n"
-" --disallow-module-loading[=BOOL] Disallow module user requested "
-"module\n"
+" --disallow-module-loading[=BOOL] Disallow module user requested module\n"
" loading/unloading after startup\n"
" --disallow-exit[=BOOL] Disallow user requested exit\n"
-" --exit-idle-time=SECS Terminate the daemon when idle and "
-"this\n"
+" --exit-idle-time=SECS Terminate the daemon when idle and this\n"
" time passed\n"
-" --module-idle-time=SECS Unload autoloaded modules when idle "
-"and\n"
+" --module-idle-time=SECS Unload autoloaded modules when idle and\n"
" this time passed\n"
-" --scache-idle-time=SECS Unload autoloaded samples when idle "
-"and\n"
+" --scache-idle-time=SECS Unload autoloaded samples when idle and\n"
" this time passed\n"
" --log-level[=LEVEL] Increase or set verbosity level\n"
" -v Increase the verbosity level\n"
" --log-target={auto,syslog,stderr} Specify the log target\n"
-" --log-meta[=BOOL] Include code location in log "
-"messages\n"
+" --log-meta[=BOOL] Include code location in log messages\n"
" --log-time[=BOOL] Include timestamps in log messages\n"
" --log-backtrace=FRAMES Include a backtrace in log messages\n"
-" -p, --dl-search-path=PATH Set the search path for dynamic "
-"shared\n"
+" -p, --dl-search-path=PATH Set the search path for dynamic shared\n"
" objects (plugins)\n"
" --resample-method=METHOD Use the specified resampling method\n"
" (See --dump-resample-methods for\n"
" --disable-shm[=BOOL] Disable shared memory support.\n"
"\n"
"STARTUP SCRIPT:\n"
-" -L, --load=\"MODULE ARGUMENTS\" Load the specified plugin module "
-"with\n"
+" -L, --load=\"MODULE ARGUMENTS\" Load the specified plugin module with\n"
" the specified argument\n"
" -F, --file=FILENAME Run the specified script\n"
-" -C Open a command line on the running "
-"TTY\n"
+" -C Open a command line on the running TTY\n"
" after startup\n"
"\n"
" -n Don't load default script file\n"
msgstr ""
#: ../src/daemon/cmdline.c:264
-msgid ""
-"--log-level expects log level argument (either numeric in range 0..4 or one "
-"of debug, info, notice, warn, error)."
+msgid "--log-level expects log level argument (either numeric in range 0..4 or one of debug, info, notice, warn, error)."
msgstr ""
#: ../src/daemon/cmdline.c:276
msgstr ""
#: ../src/daemon/daemon-conf.c:562
-msgid ""
-"The specified default channel map has a different number of channels than "
-"the specified default number of channels."
+msgid "The specified default channel map has a different number of channels than the specified default number of channels."
msgstr ""
#: ../src/daemon/daemon-conf.c:638
"\n"
" -v, --verbose Enable verbose operations\n"
"\n"
-" -s, --server=SERVER The name of the server to connect "
-"to\n"
-" -d, --device=DEVICE The name of the sink/source to "
-"connect to\n"
-" -n, --client-name=NAME How to call this client on the "
-"server\n"
-" --stream-name=NAME How to call this stream on the "
-"server\n"
-" --volume=VOLUME Specify the initial (linear) volume "
-"in range 0...65536\n"
-" --rate=SAMPLERATE The sample rate in Hz (defaults to "
-"44100)\n"
-" --format=SAMPLEFORMAT The sample type, one of s16le, "
-"s16be, u8, float32le,\n"
-" float32be, ulaw, alaw, s32le, s32be, "
-"s24le, s24be,\n"
-" s24-32le, s24-32be (defaults to "
-"s16ne)\n"
-" --channels=CHANNELS The number of channels, 1 for mono, "
-"2 for stereo\n"
+" -s, --server=SERVER The name of the server to connect to\n"
+" -d, --device=DEVICE The name of the sink/source to connect to\n"
+" -n, --client-name=NAME How to call this client on the server\n"
+" --stream-name=NAME How to call this stream on the server\n"
+" --volume=VOLUME Specify the initial (linear) volume in range 0...65536\n"
+" --rate=SAMPLERATE The sample rate in Hz (defaults to 44100)\n"
+" --format=SAMPLEFORMAT The sample type, one of s16le, s16be, u8, float32le,\n"
+" float32be, ulaw, alaw, s32le, s32be, s24le, s24be,\n"
+" s24-32le, s24-32be (defaults to s16ne)\n"
+" --channels=CHANNELS The number of channels, 1 for mono, 2 for stereo\n"
" (defaults to 2)\n"
-" --channel-map=CHANNELMAP Channel map to use instead of the "
-"default\n"
-" --fix-format Take the sample format from the sink "
-"the stream is\n"
+" --channel-map=CHANNELMAP Channel map to use instead of the default\n"
+" --fix-format Take the sample format from the sink the stream is\n"
" being connected to.\n"
-" --fix-rate Take the sampling rate from the sink "
-"the stream is\n"
+" --fix-rate Take the sampling rate from the sink the stream is\n"
" being connected to.\n"
-" --fix-channels Take the number of channels and the "
-"channel map\n"
-" from the sink the stream is being "
-"connected to.\n"
+" --fix-channels Take the number of channels and the channel map\n"
+" from the sink the stream is being connected to.\n"
" --no-remix Don't upmix or downmix channels.\n"
-" --no-remap Map channels by index instead of "
-"name.\n"
-" --latency=BYTES Request the specified latency in "
-"bytes.\n"
-" --process-time=BYTES Request the specified process time "
-"per request in bytes.\n"
-" --property=PROPERTY=VALUE Set the specified property to the "
-"specified value.\n"
+" --no-remap Map channels by index instead of name.\n"
+" --latency=BYTES Request the specified latency in bytes.\n"
+" --process-time=BYTES Request the specified process time per request in bytes.\n"
+" --property=PROPERTY=VALUE Set the specified property to the specified value.\n"
" --raw Record/play raw PCM data.\n"
" --file-format=FFORMAT Record/play formatted PCM data.\n"
" --list-file-formats List available file formats.\n"
msgstr ""
#: ../src/utils/pacat.c:959
-msgid ""
-"Warning: specified sample specification will be overwritten with "
-"specification from file."
+msgid "Warning: specified sample specification will be overwritten with specification from file."
msgstr ""
#: ../src/utils/pacat.c:962 ../src/utils/pactl.c:997
#: ../src/utils/pacat.c:1008
#, c-format
-msgid ""
-"Opening a %s stream with sample specification '%s' and channel map '%s'."
+msgid "Opening a %s stream with sample specification '%s' and channel map '%s'."
msgstr ""
#: ../src/utils/pacat.c:1009
"\n"
" -h, --help Show this help\n"
" --version Show version\n"
-" -s, --server=SERVER The name of the server to connect "
-"to\n"
+" -s, --server=SERVER The name of the server to connect to\n"
"\n"
msgstr ""
" -h, --help Show this help\n"
" --version Show version\n"
"\n"
-" -s, --server=SERVER The name of the server to connect "
-"to\n"
-" -n, --client-name=NAME How to call this client on the "
-"server\n"
+" -s, --server=SERVER The name of the server to connect to\n"
+" -n, --client-name=NAME How to call this client on the server\n"
msgstr ""
#: ../src/utils/pactl.c:933
msgstr ""
#: ../src/utils/pactl.c:1090
-msgid ""
-"You may not specify more than one sink. You have to specify a boolean value."
+msgid "You may not specify more than one sink. You have to specify a boolean value."
msgstr ""
#: ../src/utils/pactl.c:1103
-msgid ""
-"You may not specify more than one source. You have to specify a boolean "
-"value."
+msgid "You may not specify more than one source. You have to specify a boolean value."
msgstr ""
#: ../src/utils/pactl.c:1115
"\n"
" -d Show current PulseAudio data attached to X11 display (default)\n"
" -e Export local PulseAudio data to X11 display\n"
-" -i Import PulseAudio data from X11 display to local environment "
-"variables and cookie file.\n"
+" -i Import PulseAudio data from X11 display to local environment variables and cookie file.\n"
" -r Remove PulseAudio data from X11 display\n"
msgstr ""
#: ../src/modules/alsa/alsa-sink.c:530 ../src/modules/alsa/alsa-sink.c:689
#, c-format
msgid ""
-"ALSA woke us up to write new data to the device, but there was actually "
-"nothing to write!\n"
-"Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
-"to the ALSA developers.\n"
-"We were woken up with POLLOUT set -- however a subsequent snd_pcm_avail() "
-"returned 0 or another value < min_avail."
+"ALSA woke us up to write new data to the device, but there was actually nothing to write!\n"
+"Most likely this is a bug in the ALSA driver '%s'. Please report this issue to the ALSA developers.\n"
+"We were woken up with POLLOUT set -- however a subsequent snd_pcm_avail() returned 0 or another value < min_avail."
msgstr ""
#: ../src/modules/alsa/alsa-source.c:506 ../src/modules/alsa/alsa-source.c:656
#, c-format
msgid ""
-"ALSA woke us up to read new data from the device, but there was actually "
-"nothing to read!\n"
-"Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
-"to the ALSA developers.\n"
-"We were woken up with POLLIN set -- however a subsequent snd_pcm_avail() "
-"returned 0 or another value < min_avail."
+"ALSA woke us up to read new data from the device, but there was actually nothing to read!\n"
+"Most likely this is a bug in the ALSA driver '%s'. Please report this issue to the ALSA developers.\n"
+"We were woken up with POLLIN set -- however a subsequent snd_pcm_avail() returned 0 or another value < min_avail."
msgstr ""
#: ../src/modules/alsa/module-alsa-card.c:152
projects / platform / upstream / pulseaudio.git / commitdiff