ARM: dts: s5pv210: Add remaining i2c-gpio adapters to Aries boards

The remaining i2c-gpio adapters that are common to all Aries boards
have devices without mainline bindings attachted to them.  Add them
here for documentation.

Signed-off-by: Jonathan Bakker <xc-racer2@live.ca>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
index 046366d..a374870 100644 (file)
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -13,10 +13,13 @@
 
        aliases {
                i2c4 = &i2c_sound;
+               i2c5 = &i2c_accel;
                i2c6 = &i2c_pmic;
                i2c7 = &i2c_musb;
                i2c9 = &i2c_fuel;
                i2c10 = &i2c_touchkey;
+               i2c11 = &i2c_prox;
+               i2c12 = &i2c_magnetometer;
        };
 
        memory@30000000 {
@@ -120,6 +123,22 @@
                };
        };
 
+       i2c_accel: i2c-gpio-1 {
+               compatible = "i2c-gpio";
+               sda-gpios = <&gpj3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+               scl-gpios = <&gpj3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+               i2c-gpio,delay-us = <2>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               pinctrl-names = "default";
+               pinctrl-0 = <&accel_i2c_pins>;
+
+               status = "disabled";
+
+               /* bma023 accelerometer, no mainline binding */
+       };
+
        i2c_pmic: i2c-gpio-2 {
                compatible = "i2c-gpio";
                sda-gpios = <&gpj4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -435,6 +454,38 @@
                };
        };
 
+       i2c_prox: i2c-gpio-6 {
+               compatible = "i2c-gpio";
+               sda-gpios = <&gpg2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+               scl-gpios = <&gpg0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+               i2c-gpio,delay-us = <2>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               pinctrl-names = "default";
+               pinctrl-0 = <&prox_i2c_pins>;
+
+               status = "disabled";
+
+               /* Sharp gp2a prox/light sensor, incomplete mainline binding */
+       };
+
+       i2c_magnetometer: i2c-gpio-7 {
+               compatible = "i2c-gpio";
+               sda-gpios = <&gpj0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+               scl-gpios = <&gpj0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+               i2c-gpio,delay-us = <2>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               pinctrl-names = "default";
+               pinctrl-0 = <&magnetometer_i2c_pins>;
+
+               status = "disabled";
+
+               /* Yamaha yas529 magnetometer, no mainline binding */
+       };
+
        vibrator: pwm-vibrator {
                compatible = "pwm-vibrator";
                pwms = <&pwm 1 44642 0>;
@@ -546,6 +597,12 @@
                samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
        };
 
+       prox_i2c_pins: gp2a-i2c-pins {
+               samsung,pins = "gpg0-2", "gpg2-2";
+               samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+               samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+       };
+
        wlan_gpio_rst: wlan-gpio-rst {
                samsung,pins = "gpg1-2";
                samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
@@ -586,6 +643,12 @@
                samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
        };
 
+       magnetometer_i2c_pins: yas529-i2c-pins {
+               samsung,pins = "gpj0-0", "gpj0-1";
+               samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+               samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+       };
+
        ts_irq: ts-irq {
                samsung,pins = "gpj0-5";
                samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
@@ -611,6 +674,12 @@
                samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
        };
 
+       accel_i2c_pins: accel-i2c-pins {
+               samsung,pins = "gpj3-6", "gpj3-7";
+               samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+               samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+       };
+
        pmic_i2c_pins: pmic-i2c-pins {
                samsung,pins = "gpj4-0", "gpj4-3";
                samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;