serial: omap: fix a few checkpatch warnings

Signed-off-by: Philippe Proulx <philippe.proulx@savoirfairelinux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index e42eb1e..97c07f6 100644 (file)
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -177,7 +177,7 @@ struct uart_omap_port {
        bool                    is_suspending;
 };
 
-#define to_uart_omap_port(p)   ((container_of((p), struct uart_omap_port, port)))
+#define to_uart_omap_port(p) ((container_of((p), struct uart_omap_port, port)))
 
 static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS];
 
@@ -257,9 +257,9 @@ serial_omap_baud_is_mode16(struct uart_port *port, unsigned int baud)
        unsigned int n16 = port->uartclk / (16 * baud);
        int baudAbsDiff13 = baud - (port->uartclk / (13 * n13));
        int baudAbsDiff16 = baud - (port->uartclk / (16 * n16));
-       if(baudAbsDiff13 < 0)
+       if (baudAbsDiff13 < 0)
                baudAbsDiff13 = -baudAbsDiff13;
-       if(baudAbsDiff16 < 0)
+       if (baudAbsDiff16 < 0)
                baudAbsDiff16 = -baudAbsDiff16;
 
        return (baudAbsDiff13 >= baudAbsDiff16);
@@ -316,9 +316,8 @@ static void serial_omap_stop_tx(struct uart_port *port)
                        serial_out(up, UART_OMAP_SCR, up->scr);
                        res = (up->rs485.flags & SER_RS485_RTS_AFTER_SEND) ? 1 : 0;
                        if (gpio_get_value(up->rts_gpio) != res) {
-                               if (up->rs485.delay_rts_after_send > 0) {
+                               if (up->rs485.delay_rts_after_send > 0)
                                        mdelay(up->rs485.delay_rts_after_send);
-                               }
                                gpio_set_value(up->rts_gpio, res);
                        }
                } else {
@@ -422,9 +421,8 @@ static void serial_omap_start_tx(struct uart_port *port)
                res = (up->rs485.flags & SER_RS485_RTS_ON_SEND) ? 1 : 0;
                if (gpio_get_value(up->rts_gpio) != res) {
                        gpio_set_value(up->rts_gpio, res);
-                       if (up->rs485.delay_rts_before_send > 0) {
+                       if (up->rs485.delay_rts_before_send > 0)
                                mdelay(up->rs485.delay_rts_before_send);
-                       }
                }
        }
 
@@ -1724,8 +1722,9 @@ static int serial_omap_probe(struct platform_device *pdev)
        up->port.uartclk = omap_up_info->uartclk;
        if (!up->port.uartclk) {
                up->port.uartclk = DEFAULT_CLK_SPEED;
-               dev_warn(&pdev->dev, "No clock speed specified: using default:"
-                                               "%d\n", DEFAULT_CLK_SPEED);
+               dev_warn(&pdev->dev,
+                        "No clock speed specified: using default: %d\n"
+                        DEFAULT_CLK_SPEED);
        }
 
        up->latency = PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE;