km: clean up header files for KM Kirkwood boards

Remove unused preprocessor definitions and comments of already eliminated
code.

The Ethernet driver configuration is already declared in
arch/arm/mach-kirkwood/include/mach/config.h and, therefore, superfluous.

Signed-off-by: Pascal Linder <pascal.linder@edu.hefr.ch>
Signed-off-by: Holger Brunck <holger.brunck@ch.abb.com>
Signed-off-by: Stefan Roese <sr@denx.de>

diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h
index 3106ef1..8433d8e 100644 (file)
--- a/include/configs/km/keymile-common.h
+++ b/include/configs/km/keymile-common.h
@@ -7,8 +7,6 @@
 #ifndef __CONFIG_KEYMILE_H
 #define __CONFIG_KEYMILE_H
 
-#undef CONFIG_WATCHDOG         /* disable platform specific watchdog */
-
 /*
  * Miscellaneous configurable options
  */

diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h
index 22bd744..8b0b665 100644 (file)
--- a/include/configs/km/km_arm.h
+++ b/include/configs/km/km_arm.h
@@ -32,8 +32,6 @@
 /* include common defines/options for all Keymile boards */
 #include "keymile-common.h"
 
-/* SPI NOR Flash default params, used by sf commands */
-
 /* Reserve 4 MB for malloc */
 #define CONFIG_SYS_MALLOC_LEN          (4 * 1024 * 1024)
 
@@ -72,17 +70,10 @@
 #define CONFIG_SYS_NS16550_COM2                KW_UART1_BASE
 
 /*
- * Serial Port configuration
- * The following definitions let you select what serial you want to use
- * for your console driver.
- */
-
-/*
  * For booting Linux, the board info and command line data
  * have to be in the first 8 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_BOOTMAPSZ       (8 << 20)       /* Initial Memmap for Linux */
 #define CONFIG_CMDLINE_TAG             /* enable passing of ATAGs  */
 #define CONFIG_INITRD_TAG              /* enable INITRD tag */
 #define CONFIG_SETUP_MEMORY_TAGS       /* enable memory tag */
@@ -92,22 +83,16 @@
  */
 #define CONFIG_SYS_MAX_NAND_DEVICE     1
 
-#define BOOTFLASH_START                0x0
-
 /*
  * Other required minimal configurations
  */
 #define CONFIG_ARCH_CPU_INIT           /* call arch_cpu_init() */
-#define CONFIG_SYS_RESET_ADDRESS 0xffff0000    /* Rst Vector Adr */
 
 /*
  * Ethernet Driver configuration
  */
-#define CONFIG_NETCONSOLE      /* include NetConsole support   */
-#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN        /* detect link using phy */
 #define CONFIG_MVGBE_PORTS     {1, 0}  /* enable port 0 only */
 #define CONFIG_PHY_BASE_ADR    0
-#define CONFIG_ENV_OVERWRITE   /* ethaddr can be reprogrammed */
 
 /*
  * I2C related stuff
@@ -221,13 +206,8 @@ int get_scl(void);
        "arch=arm\0"                                                    \
        ""
 
-#if !defined(CONFIG_MTD_NOR_FLASH)
-#undef CONFIG_JFFS2_CMDLINE
-#endif
-
 /* additions for new relocation code, must be added to all boards */
 #define CONFIG_SYS_SDRAM_BASE          0x00000000
-/* Do early setups now in board_init_f() */
 
 /* address for the bootcount (taken from end of RAM) */
 #define BOOTCOUNT_ADDR          (CONFIG_KM_RESERVED_PRAM)
@@ -237,6 +217,4 @@ int get_scl(void);
 #define CONFIG_POST_SKIP_ENV_FLAGS
 #define CONFIG_POST_EXTERNAL_WORD_FUNCS
 
-/* we do the whole PCIe FPGA config stuff here */
-
 #endif /* _CONFIG_KM_ARM_H */

diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 8c5c5dd..b9c8cf8 100644 (file)
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -129,7 +129,6 @@ CONFIG_BOARD_SIZE_LIMIT
 CONFIG_BOOGER
 CONFIG_BOOTBLOCK
 CONFIG_BOOTFILE
-CONFIG_BOOTMAPSZ
 CONFIG_BOOTMODE
 CONFIG_BOOTM_LINUX
 CONFIG_BOOTM_NETBSD