ARM: dts: omap4-droid4: Configure MDM6600 USB PHY

Configure MDM6600 USB PHY.

Cc: Marcel Partap <mpartap@gmx.net>
Cc: Michael Scott <michael.scott@linaro.org>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>

diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
index e24d278c34007bd9ab76a7cd235df41641bb07aa..33fc6f9f07b26d0ab2c3e340b7c2ac6716f607a8 100644 (file)
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -70,6 +70,28 @@
                regulator-always-on;
        };
 
+       /* FS USB Host PHY on port 1 for mdm6600 */
+       fsusb1_phy: usb-phy@1 {
+               compatible = "motorola,mapphone-mdm6600";
+               pinctrl-0 = <&usb_mdm6600_pins>;
+               pinctrl-names = "default";
+               enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>;     /* gpio_95 */
+               power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;     /* gpio_54 */
+               reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;     /* gpio_49 */
+               /* mode: gpio_148 gpio_149 */
+               motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
+                                     <&gpio5 21 GPIO_ACTIVE_HIGH>;
+               /* cmd: gpio_103 gpio_104 gpio_142 */
+               motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
+                                    <&gpio4 8 GPIO_ACTIVE_HIGH>,
+                                    <&gpio5 14 GPIO_ACTIVE_HIGH>;
+               /* status: gpio_52 gpio_53 gpio_55 */
+               motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
+                                       <&gpio2 21 GPIO_ACTIVE_HIGH>,
+                                       <&gpio2 23 GPIO_ACTIVE_HIGH>;
+               #phy-cells = <0>;
+       };
+
        /* HS USB host TLL nop-phy on port 2 for w3glte */
        hsusb2_phy: usb-phy@2 {
                compatible = "usb-nop-xceiv";
@@ -455,6 +477,43 @@
                >;
        };
 
+       usb_mdm6600_pins: pinmux_usb_mdm6600_pins {
+               pinctrl-single,pins = <
+               /* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */
+               OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
+
+               /* power 0x4a10007c gpmc_nwp.gpio_54 c25 */
+               OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
+
+               /* reset 0x4a100072 gpmc_a25.gpio_49 d20 */
+               OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3)
+
+               /* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */
+               OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
+
+               /* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */
+               OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
+
+               /* status0 0x4a10007e gpmc_clk.gpio_55 b22 */
+               OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
+
+               /* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */
+               OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
+
+               /* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */
+               OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
+
+               /* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */
+               OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
+
+               /* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */
+               OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
+
+               /* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */
+               OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
+               >;
+       };
+
        usb_ulpi_pins: pinmux_usb_ulpi_pins {
                pinctrl-single,pins = <
                OMAP4_IOPAD(0x196, MUX_MODE7)
@@ -579,6 +638,11 @@
        };
 };
 
+&usbhsohci {
+       phys = <&fsusb1_phy>;
+       phy-names = "usb";
+};
+
 &usbhsehci {
        phys = <&hsusb2_phy>;
 };