--- /dev/null
+/* Industrialio buffer test code.
+ *
+ * Copyright (c) 2008 Jonathan Cameron
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is primarily intended as an example application.
+ * Reads the current buffer setup from sysfs and starts a short capture
+ * from the specified device, pretty printing the result after appropriate
+ * conversion.
+ *
+ * Command line parameters
+ * generic_buffer -n <device_name> -t <trigger_name>
+ * If trigger name is not specified the program assumes you want a dataready
+ * trigger associated with the device and goes looking for it.
+ *
+ */
+
+#include <unistd.h>
+#include <dirent.h>
+#include <fcntl.h>
+#include <stdio.h>
+#include <errno.h>
+#include <sys/stat.h>
+#include <sys/dir.h>
+#include <linux/types.h>
+#include "iio_utils.h"
+
+const int buf_len = 128;
+const int num_loops = 2;
+
+/**
+ * size_from_channelarray() - calculate the storage size of a scan
+ * @channels: the channel info array
+ * @num_channels: size of the channel info array
+ *
+ * Has the side effect of filling the channels[i].location values used
+ * in processing the buffer output.
+ **/
+int size_from_channelarray(struct iio_channel_info *channels, int num_channels)
+{
+ int bytes = 0;
+ int i = 0;
+ while (i < num_channels) {
+ if (bytes % channels[i].bytes == 0)
+ channels[i].location = bytes;
+ else
+ channels[i].location = bytes - bytes%channels[i].bytes
+ + channels[i].bytes;
+ bytes = channels[i].location + channels[i].bytes;
+ i++;
+ }
+ return bytes;
+}
+
+/**
+ * process_scan() - print out the values in SI units
+ * @data: pointer to the start of the scan
+ * @infoarray: information about the channels. Note
+ * size_from_channelarray must have been called first to fill the
+ * location offsets.
+ * @num_channels: the number of active channels
+ **/
+void process_scan(char *data,
+ struct iio_channel_info *infoarray,
+ int num_channels)
+{
+ int k;
+ for (k = 0; k < num_channels; k++)
+ switch (infoarray[k].bytes) {
+ /* only a few cases implemented so far */
+ case 2:
+ if (infoarray[k].is_signed) {
+ int16_t val = *(int16_t *)
+ (data
+ + infoarray[k].location);
+ if ((val >> infoarray[k].bits_used) & 1)
+ val = (val & infoarray[k].mask) |
+ ~infoarray[k].mask;
+ printf("%05f ", ((float)val +
+ infoarray[k].offset)*
+ infoarray[k].scale);
+ } else {
+ uint16_t val = *(uint16_t *)
+ (data +
+ infoarray[k].location);
+ val = (val & infoarray[k].mask);
+ printf("%05f ", ((float)val +
+ infoarray[k].offset)*
+ infoarray[k].scale);
+ }
+ break;
+ case 8:
+ if (infoarray[k].is_signed) {
+ int64_t val = *(int64_t *)
+ (data +
+ infoarray[k].location);
+ if ((val >> infoarray[k].bits_used) & 1)
+ val = (val & infoarray[k].mask) |
+ ~infoarray[k].mask;
+ /* special case for timestamp */
+ if (infoarray[k].scale == 1.0f &&
+ infoarray[k].offset == 0.0f)
+ printf(" %lld", val);
+ else
+ printf("%05f ", ((float)val +
+ infoarray[k].offset)*
+ infoarray[k].scale);
+ }
+ break;
+ default:
+ break;
+ }
+ printf("\n");
+}
+
+int main(int argc, char **argv)
+{
+ int ret, c, i, j, toread;
+
+ FILE *fp_ev;
+ int fp;
+
+ int num_channels;
+ char *trigger_name = NULL, *device_name = NULL;
+ char *dev_dir_name, *buf_dir_name;
+
+ int datardytrigger = 1;
+ char *data;
+ size_t read_size;
+ struct iio_event_data dat;
+ int dev_num, trig_num;
+ char *buffer_access, *buffer_event;
+ int scan_size;
+
+ struct iio_channel_info *infoarray;
+
+ while ((c = getopt(argc, argv, "t:n:")) != -1) {
+ switch (c) {
+ case 'n':
+ device_name = optarg;
+ break;
+ case 't':
+ trigger_name = optarg;
+ datardytrigger = 0;
+ break;
+ case '?':
+ return -1;
+ }
+ }
+
+ /* Find the device requested */
+ dev_num = find_type_by_name(device_name, "device");
+ if (dev_num < 0) {
+ printf("Failed to find the %s\n", device_name);
+ ret = -ENODEV;
+ goto error_ret;
+ }
+ printf("iio device number being used is %d\n", dev_num);
+
+ asprintf(&dev_dir_name, "%sdevice%d", iio_dir, dev_num);
+ if (trigger_name == NULL) {
+ /*
+ * Build the trigger name. If it is device associated it's
+ * name is <device_name>_dev[n] where n matches the device
+ * number found above
+ */
+ ret = asprintf(&trigger_name,
+ "%s-dev%d", device_name, dev_num);
+ if (ret < 0) {
+ ret = -ENOMEM;
+ goto error_ret;
+ }
+ }
+
+ /* Verify the trigger exists */
+ trig_num = find_type_by_name(trigger_name, "trigger");
+ if (trig_num < 0) {
+ printf("Failed to find the trigger %s\n", trigger_name);
+ ret = -ENODEV;
+ goto error_free_triggername;
+ }
+ printf("iio trigger number being used is %d\n", trig_num);
+
+ /*
+ * Parse the files in scan_elements to identify what channels are
+ * present
+ */
+ ret = build_channel_array(dev_dir_name, &infoarray, &num_channels);
+ if (ret) {
+ printf("Problem reading scan element information \n");
+ goto error_free_triggername;
+ }
+
+ /*
+ * Construct the directory name for the associated buffer.
+ * As we know that the lis3l02dq has only one buffer this may
+ * be built rather than found.
+ */
+ ret = asprintf(&buf_dir_name, "%sdevice%d:buffer0", iio_dir, dev_num);
+ if (ret < 0) {
+ ret = -ENOMEM;
+ goto error_free_triggername;
+ }
+ printf("%s %s\n", dev_dir_name, trigger_name);
+ /* Set the device trigger to be the data rdy trigger found above */
+ ret = write_sysfs_string_and_verify("trigger/current_trigger",
+ dev_dir_name,
+ trigger_name);
+ if (ret < 0) {
+ printf("Failed to write current_trigger file\n");
+ goto error_free_buf_dir_name;
+ }
+
+ /* Setup ring buffer parameters */
+ ret = write_sysfs_int("length", buf_dir_name, buf_len);
+ if (ret < 0)
+ goto error_free_buf_dir_name;
+
+ /* Enable the buffer */
+ ret = write_sysfs_int("enable", buf_dir_name, 1);
+ if (ret < 0)
+ goto error_free_buf_dir_name;
+ scan_size = size_from_channelarray(infoarray, num_channels);
+ data = malloc(scan_size*buf_len);
+ if (!data) {
+ ret = -ENOMEM;
+ goto error_free_buf_dir_name;
+ }
+
+ ret = asprintf(&buffer_access,
+ "/dev/device%d:buffer0:access0",
+ dev_num);
+ if (ret < 0) {
+ ret = -ENOMEM;
+ goto error_free_data;
+ }
+
+ ret = asprintf(&buffer_event, "/dev/device%d:buffer0:event0", dev_num);
+ if (ret < 0) {
+ ret = -ENOMEM;
+ goto error_free_buffer_access;
+ }
+ /* Attempt to open non blocking the access dev */
+ fp = open(buffer_access, O_RDONLY | O_NONBLOCK);
+ if (fp == -1) { /*If it isn't there make the node */
+ printf("Failed to open %s\n", buffer_access);
+ ret = -errno;
+ goto error_free_buffer_event;
+ }
+ /* Attempt to open the event access dev (blocking this time) */
+ fp_ev = fopen(buffer_event, "rb");
+ if (fp_ev == NULL) {
+ printf("Failed to open %s\n", buffer_event);
+ ret = -errno;
+ goto error_close_buffer_access;
+ }
+
+ /* Wait for events 10 times */
+ for (j = 0; j < num_loops; j++) {
+ read_size = fread(&dat, 1, sizeof(struct iio_event_data),
+ fp_ev);
+ switch (dat.id) {
+ case IIO_EVENT_CODE_RING_100_FULL:
+ toread = buf_len;
+ break;
+ case IIO_EVENT_CODE_RING_75_FULL:
+ toread = buf_len*3/4;
+ break;
+ case IIO_EVENT_CODE_RING_50_FULL:
+ toread = buf_len/2;
+ break;
+ default:
+ printf("Unexpecteded event code\n");
+ continue;
+ }
+ read_size = read(fp,
+ data,
+ toread*scan_size);
+ if (read_size == -EAGAIN) {
+ printf("nothing available\n");
+ continue;
+ }
+ for (i = 0; i < read_size/scan_size; i++)
+ process_scan(data + scan_size*i,
+ infoarray,
+ num_channels);
+ }
+
+ /* Stop the ring buffer */
+ ret = write_sysfs_int("enable", buf_dir_name, 0);
+ if (ret < 0)
+ goto error_close_buffer_event;
+
+ /* Disconnect from the trigger - just write a dummy name.*/
+ write_sysfs_string("trigger/current_trigger",
+ dev_dir_name, "NULL");
+
+error_close_buffer_event:
+ fclose(fp_ev);
+error_close_buffer_access:
+ close(fp);
+error_free_data:
+ free(data);
+error_free_buffer_access:
+ free(buffer_access);
+error_free_buffer_event:
+ free(buffer_event);
+error_free_buf_dir_name:
+ free(buf_dir_name);
+error_free_triggername:
+ if (datardytrigger)
+ free(trigger_name);
+error_ret:
+ return ret;
+}
/* Made up value to limit allocation sizes */
#include <string.h>
#include <stdlib.h>
+#include <ctype.h>
+#include <stdio.h>
+#include <stdint.h>
#define IIO_MAX_NAME_LENGTH 30
-#define IIO_EVENT_CODE_RING_50_FULL 200
-#define IIO_EVENT_CODE_RING_75_FULL 201
-#define IIO_EVENT_CODE_RING_100_FULL 202
+#define IIO_EV_CLASS_BUFFER 0
+#define IIO_BUFFER_EVENT_CODE(code) \
+ (IIO_EV_CLASS_BUFFER | (code << 8))
+
+#define IIO_EVENT_CODE_RING_50_FULL IIO_BUFFER_EVENT_CODE(0)
+#define IIO_EVENT_CODE_RING_75_FULL IIO_BUFFER_EVENT_CODE(1)
+#define IIO_EVENT_CODE_RING_100_FULL IIO_BUFFER_EVENT_CODE(2)
+
+
+#define FORMAT_SCAN_ELEMENTS_DIR "%s:buffer0/scan_elements"
+#define FORMAT_TYPE_FILE "%s_type"
const char *iio_dir = "/sys/bus/iio/devices/";
};
/**
+ * iioutils_break_up_name() - extract generic name from full channel name
+ * @full_name: the full channel name
+ * @generic_name: the output generic channel name
+ **/
+static int iioutils_break_up_name(const char *full_name,
+ char **generic_name)
+{
+ char *current;
+ char *w, *r;
+ char *working;
+ current = strdup(full_name);
+ working = strtok(current, "_\0");
+ w = working;
+ r = working;
+
+ while(*r != '\0') {
+ if (!isdigit(*r)) {
+ *w = *r;
+ w++;
+ }
+ r++;
+ }
+ *w = '\0';
+ *generic_name = strdup(working);
+ free(current);
+
+ return 0;
+}
+
+/**
+ * struct iio_channel_info - information about a given channel
+ * @name: channel name
+ * @generic_name: general name for channel type
+ * @scale: scale factor to be applied for conversion to si units
+ * @offset: offset to be applied for conversion to si units
+ * @index: the channel index in the buffer output
+ * @bytes: number of bytes occupied in buffer output
+ * @mask: a bit mask for the raw output
+ * @is_signed: is the raw value stored signed
+ * @enabled: is this channel enabled
+ **/
+struct iio_channel_info {
+ char *name;
+ char *generic_name;
+ float scale;
+ float offset;
+ unsigned index;
+ unsigned bytes;
+ unsigned bits_used;
+ uint64_t mask;
+ unsigned is_signed;
+ unsigned enabled;
+ unsigned location;
+};
+
+/**
+ * iioutils_get_type() - find and process _type attribute data
+ * @is_signed: output whether channel is signed
+ * @bytes: output how many bytes the channel storage occupies
+ * @mask: output a bit mask for the raw data
+ * @device_dir: the iio device directory
+ * @name: the channel name
+ * @generic_name: the channel type name
+ **/
+inline int iioutils_get_type(unsigned *is_signed,
+ unsigned *bytes,
+ unsigned *bits_used,
+ uint64_t *mask,
+ const char *device_dir,
+ const char *name,
+ const char *generic_name)
+{
+ FILE *sysfsfp;
+ int ret;
+ DIR *dp;
+ char *scan_el_dir, *builtname, *builtname_generic, *filename = 0;
+ char signchar;
+ unsigned sizeint, padint;
+ const struct dirent *ent;
+
+ ret = asprintf(&scan_el_dir, FORMAT_SCAN_ELEMENTS_DIR, device_dir);
+ if (ret < 0) {
+ ret = -ENOMEM;
+ goto error_ret;
+ }
+ ret = asprintf(&builtname, FORMAT_TYPE_FILE, name);
+ if (ret < 0) {
+ ret = -ENOMEM;
+ goto error_free_scan_el_dir;
+ }
+ ret = asprintf(&builtname_generic, FORMAT_TYPE_FILE, generic_name);
+ if (ret < 0) {
+ ret = -ENOMEM;
+ goto error_free_builtname;
+ }
+
+ dp = opendir(scan_el_dir);
+ if (dp == NULL) {
+ ret = -errno;
+ goto error_free_builtname_generic;
+ }
+ while (ent = readdir(dp), ent != NULL)
+ /*
+ * Do we allow devices to override a generic name with
+ * a specific one?
+ */
+ if ((strcmp(builtname, ent->d_name) == 0) ||
+ (strcmp(builtname_generic, ent->d_name) == 0)) {
+ ret = asprintf(&filename,
+ "%s/%s", scan_el_dir, ent->d_name);
+ if (ret < 0) {
+ ret = -ENOMEM;
+ goto error_closedir;
+ }
+ sysfsfp = fopen(filename, "r");
+ if (sysfsfp == NULL) {
+ printf("failed to open %s\n", filename);
+ ret = -errno;
+ goto error_free_filename;
+ }
+ fscanf(sysfsfp,
+ "%c%u/%u", &signchar, bits_used, &padint);
+ *bytes = padint / 8;
+ if (sizeint == 64)
+ *mask = ~0;
+ else
+ *mask = (1 << *bits_used) - 1;
+ if (signchar == 's')
+ *is_signed = 1;
+ else
+ *is_signed = 0;
+ }
+error_free_filename:
+ if (filename)
+ free(filename);
+error_closedir:
+ closedir(dp);
+error_free_builtname_generic:
+ free(builtname_generic);
+error_free_builtname:
+ free(builtname);
+error_free_scan_el_dir:
+ free(scan_el_dir);
+error_ret:
+ return ret;
+}
+
+inline int iioutils_get_param_float(float *output,
+ const char *param_name,
+ const char *device_dir,
+ const char *name,
+ const char *generic_name)
+{
+ FILE *sysfsfp;
+ int ret;
+ DIR *dp;
+ char *builtname, *builtname_generic;
+ char *filename = NULL;
+ const struct dirent *ent;
+
+ ret = asprintf(&builtname, "%s_%s", name, param_name);
+ if (ret < 0) {
+ ret = -ENOMEM;
+ goto error_ret;
+ }
+ ret = asprintf(&builtname_generic,
+ "%s_%s", generic_name, param_name);
+ if (ret < 0) {
+ ret = -ENOMEM;
+ goto error_free_builtname;
+ }
+ dp = opendir(device_dir);
+ if (dp == NULL) {
+ ret = -errno;
+ goto error_free_builtname_generic;
+ }
+ while (ent = readdir(dp), ent != NULL)
+ if ((strcmp(builtname, ent->d_name) == 0) ||
+ (strcmp(builtname_generic, ent->d_name) == 0)) {
+ ret = asprintf(&filename,
+ "%s/%s", device_dir, ent->d_name);
+ if (ret < 0) {
+ ret = -ENOMEM;
+ goto error_closedir;
+ }
+ sysfsfp = fopen(filename, "r");
+ if (!sysfsfp) {
+ ret = -errno;
+ goto error_free_filename;
+ }
+ fscanf(sysfsfp, "%f", output);
+ break;
+ }
+error_free_filename:
+ if (filename)
+ free(filename);
+error_closedir:
+ closedir(dp);
+error_free_builtname_generic:
+ free(builtname_generic);
+error_free_builtname:
+ free(builtname);
+error_ret:
+ return ret;
+}
+
+
+/**
+ * build_channel_array() - function to figure out what channels are present
+ * @device_dir: the IIO device directory in sysfs
+ * @
+ **/
+inline int build_channel_array(const char *device_dir,
+ struct iio_channel_info **ci_array,
+ int *counter)
+{
+ DIR *dp;
+ FILE *sysfsfp;
+ int count = 0, temp, i;
+ struct iio_channel_info *current;
+ int ret;
+ const struct dirent *ent;
+ char *scan_el_dir;
+ char *filename;
+
+ *counter = 0;
+ ret = asprintf(&scan_el_dir, FORMAT_SCAN_ELEMENTS_DIR, device_dir);
+ if (ret < 0) {
+ ret = -ENOMEM;
+ goto error_ret;
+ }
+ dp = opendir(scan_el_dir);
+ if (dp == NULL) {
+ ret = -errno;
+ goto error_free_name;
+ }
+ while (ent = readdir(dp), ent != NULL)
+ if (strcmp(ent->d_name + strlen(ent->d_name) - strlen("_en"),
+ "_en") == 0) {
+ ret = asprintf(&filename,
+ "%s/%s", scan_el_dir, ent->d_name);
+ if (ret < 0) {
+ ret = -ENOMEM;
+ goto error_close_dir;
+ }
+ sysfsfp = fopen(filename, "r");
+ if (sysfsfp == NULL) {
+ ret = -errno;
+ free(filename);
+ goto error_close_dir;
+ }
+ fscanf(sysfsfp, "%u", &ret);
+ if (ret == 1)
+ (*counter)++;
+ fclose(sysfsfp);
+ free(filename);
+ }
+ *ci_array = malloc(sizeof(**ci_array)*(*counter));
+ if (*ci_array == NULL) {
+ ret = -ENOMEM;
+ goto error_close_dir;
+ }
+ seekdir(dp, 0);
+ while (ent = readdir(dp), ent != NULL) {
+ if (strcmp(ent->d_name + strlen(ent->d_name) - strlen("_en"),
+ "_en") == 0) {
+ current = &(*ci_array)[count++];
+ ret = asprintf(&filename,
+ "%s/%s", scan_el_dir, ent->d_name);
+ if (ret < 0) {
+ ret = -ENOMEM;
+ /* decrement count to avoid freeing name */
+ count--;
+ goto error_cleanup_array;
+ }
+ sysfsfp = fopen(filename, "r");
+ if (sysfsfp == NULL) {
+ free(filename);
+ ret = -errno;
+ goto error_cleanup_array;
+ }
+ fscanf(sysfsfp, "%u", ¤t->enabled);
+ fclose(sysfsfp);
+ free(filename);
+ current->scale = 1.0;
+ current->offset = 0;
+ current->name = strndup(ent->d_name,
+ strlen(ent->d_name) -
+ strlen("_en"));
+ if (current->name == NULL) {
+ free(filename);
+ ret = -ENOMEM;
+ goto error_cleanup_array;
+ }
+ /* Get the generic and specific name elements */
+ ret = iioutils_break_up_name(current->name,
+ ¤t->generic_name);
+ if (ret) {
+ free(filename);
+ goto error_cleanup_array;
+ }
+ ret = asprintf(&filename,
+ "%s/%s_index",
+ scan_el_dir,
+ current->name);
+ if (ret < 0) {
+ free(filename);
+ ret = -ENOMEM;
+ goto error_cleanup_array;
+ }
+ sysfsfp = fopen(filename, "r");
+ fscanf(sysfsfp, "%u", ¤t->index);
+ fclose(sysfsfp);
+ free(filename);
+ /* Find the scale */
+ ret = iioutils_get_param_float(¤t->scale,
+ "scale",
+ device_dir,
+ current->name,
+ current->generic_name);
+ if (ret < 0)
+ goto error_cleanup_array;
+ ret = iioutils_get_param_float(¤t->offset,
+ "offset",
+ device_dir,
+ current->name,
+ current->generic_name);
+ if (ret < 0)
+ goto error_cleanup_array;
+ ret = iioutils_get_type(¤t->is_signed,
+ ¤t->bytes,
+ ¤t->bits_used,
+ ¤t->mask,
+ device_dir,
+ current->name,
+ current->generic_name);
+ }
+ }
+ /* reorder so that the array is in index order*/
+ current = malloc(sizeof(**ci_array)**counter);
+ if (current == NULL) {
+ ret = -ENOMEM;
+ goto error_cleanup_array;
+ }
+ closedir(dp);
+ count = 0;
+ temp = 0;
+ while (count < *counter)
+ for (i = 0; i < *counter; i++)
+ if ((*ci_array)[i].index == temp) {
+ memcpy(¤t[count++],
+ &(*ci_array)[i],
+ sizeof(*current));
+ temp++;
+ break;
+ }
+ free(*ci_array);
+ *ci_array = current;
+
+ return 0;
+
+error_cleanup_array:
+ for (i = count - 1; i >= 0; i++)
+ free((*ci_array)[i].name);
+ free(*ci_array);
+error_close_dir:
+ closedir(dp);
+error_free_name:
+ free(scan_el_dir);
+error_ret:
+ return ret;
+}
+
+/**
* find_type_by_name() - function to match top level types by name
* @name: top level type instance name
* @type: the type of top level instance being sort
DIR *dp;
char thisname[IIO_MAX_NAME_LENGTH];
char *filename;
- struct stat Stat;
dp = opendir(iio_dir);
if (dp == NULL) {
int _write_sysfs_string(char *filename, char *basedir, char *val, int verify)
{
- int ret;
+ int ret = 0;
FILE *sysfsfp;
char *temp = malloc(strlen(basedir) + strlen(filename) + 2);
if (temp == NULL) {
if (verify) {
sysfsfp = fopen(temp, "r");
if (sysfsfp == NULL) {
+ printf("could not open file to verify\n");
ret = -errno;
goto error_free;
}
return ret;
}
+
/**
* write_sysfs_string_and_verify() - string write, readback and verify
* @filename: name of file to write to
+++ /dev/null
-/* Industrialio ring buffer with a lis3l02dq accelerometer
- *
- * Copyright (c) 2008 Jonathan Cameron
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * This program is primarily intended as an example application.
- */
-
-#include <dirent.h>
-#include <fcntl.h>
-#include <stdio.h>
-#include <errno.h>
-#include <sys/stat.h>
-#include <sys/dir.h>
-#include <linux/types.h>
-#include "iio_utils.h"
-
-const char *device_name = "lis3l02dq";
-const char *trigger_name_base = "lis3l02dq-dev";
-const int num_vals = 3;
-const int scan_ts = 1;
-const int buf_len = 128;
-const int num_loops = 10;
-
-/*
- * Could get this from ring bps, but only after starting the ring
- * which is a bit late for it to be useful.
- *
- * Todo: replace with much more generic version based on scan_elements
- * directory.
- */
-int size_from_scanmode(int num_vals, int timestamp)
-{
- if (num_vals && timestamp)
- return 16;
- else if (timestamp)
- return 8;
- else
- return num_vals*2;
-}
-
-int main(int argc, char **argv)
-{
- int ret;
- int i, j, k, toread;
- FILE *fp_ev;
- int fp;
-
- char *trigger_name, *dev_dir_name, *buf_dir_name;
- char *data;
- size_t read_size;
- struct iio_event_data dat;
- int dev_num, trig_num;
-
- char *buffer_access, *buffer_event;
- const char *iio_dir = "/sys/bus/iio/devices/";
- int scan_size;
- float gain = 1;
-
-
- /* Find out which iio device is the accelerometer. */
- dev_num = find_type_by_name(device_name, "device");
- if (dev_num < 0) {
- printf("Failed to find the %s\n", device_name);
- ret = -ENODEV;
- goto error_ret;
- }
- printf("iio device number being used is %d\n", dev_num);
- asprintf(&dev_dir_name, "%sdevice%d", iio_dir, dev_num);
-
- /*
- * Build the trigger name.
- * In this case we want the lis3l02dq's data ready trigger
- * for this lis3l02dq. The naming is lis3l02dq_dev[n], where
- * n matches the device number found above.
- */
- ret = asprintf(&trigger_name, "%s%d", trigger_name_base, dev_num);
- if (ret < 0) {
- ret = -ENOMEM;
- goto error_free_dev_dir_name;
- }
-
- /*
- * Find the trigger by name.
- * This is techically unecessary here as we only need to
- * refer to the trigger by name and that name is already
- * known.
- */
- trig_num = find_type_by_name(trigger_name, "trigger");
- if (trig_num < 0) {
- printf("Failed to find the %s\n", trigger_name);
- ret = -ENODEV;
- goto error_free_triggername;
- }
- printf("iio trigger number being used is %d\n", trig_num);
-
- /*
- * Read in the scale value - in a more generic case, first
- * check for accel_scale, then the indivual channel scales
- */
- ret = read_sysfs_float("accel_scale", dev_dir_name, &gain);
- if (ret)
- goto error_free_triggername;;
-
- /*
- * Construct the directory name for the associated buffer.
- * As we know that the lis3l02dq has only one buffer this may
- * be built rather than found.
- */
- ret = asprintf(&buf_dir_name, "%sdevice%d:buffer0", iio_dir, dev_num);
- if (ret < 0) {
- ret = -ENOMEM;
- goto error_free_triggername;
- }
- /* Set the device trigger to be the data rdy trigger found above */
- ret = write_sysfs_string_and_verify("trigger/current_trigger",
- dev_dir_name,
- trigger_name);
- if (ret < 0) {
- printf("Failed to write current_trigger file\n");
- goto error_free_buf_dir_name;
- }
-
- /* Setup ring buffer parameters */
- ret = write_sysfs_int("length", buf_dir_name, buf_len);
- if (ret < 0)
- goto error_free_buf_dir_name;
-
- /* Enable the buffer */
- ret = write_sysfs_int("enable", buf_dir_name, 1);
- if (ret < 0)
- goto error_free_buf_dir_name;
-
- data = malloc(size_from_scanmode(num_vals, scan_ts)*buf_len);
- if (!data) {
- ret = -ENOMEM;
- goto error_free_buf_dir_name;
- }
-
- ret = asprintf(&buffer_access,
- "/dev/device%d:buffer0:access0",
- dev_num);
- if (ret < 0) {
- ret = -ENOMEM;
- goto error_free_data;
- }
-
- ret = asprintf(&buffer_event, "/dev/device%d:buffer0:event0", dev_num);
- if (ret < 0) {
- ret = -ENOMEM;
- goto error_free_data;
- }
- /* Attempt to open non blocking the access dev */
- fp = open(buffer_access, O_RDONLY | O_NONBLOCK);
- if (fp == -1) { /*If it isn't there make the node */
- printf("Failed to open %s\n", buffer_access);
- ret = -errno;
- goto error_free_buffer_event;
- }
- /* Attempt to open the event access dev (blocking this time) */
- fp_ev = fopen(buffer_event, "rb");
- if (fp_ev == NULL) {
- printf("Failed to open %s\n", buffer_event);
- ret = -errno;
- goto error_close_buffer_access;
- }
-
- /* Wait for events 10 times */
- for (j = 0; j < num_loops; j++) {
- read_size = fread(&dat, 1, sizeof(struct iio_event_data),
- fp_ev);
- switch (dat.id) {
- case IIO_EVENT_CODE_RING_100_FULL:
- toread = buf_len;
- break;
- case IIO_EVENT_CODE_RING_75_FULL:
- toread = buf_len*3/4;
- break;
- case IIO_EVENT_CODE_RING_50_FULL:
- toread = buf_len/2;
- break;
- default:
- printf("Unexpecteded event code\n");
- continue;
- }
- read_size = read(fp,
- data,
- toread*size_from_scanmode(num_vals, scan_ts));
- if (read_size == -EAGAIN) {
- printf("nothing available\n");
- continue;
- }
- scan_size = size_from_scanmode(num_vals, scan_ts);
- for (i = 0; i < read_size/scan_size; i++) {
- for (k = 0; k < num_vals; k++) {
- __s16 val = *(__s16 *)(&data[i*scan_size
- + (k)*2]);
- printf("%05f ", (float)val*gain);
- }
- printf(" %lld\n",
- *(__s64 *)(&data[(i + 1)
- *size_from_scanmode(num_vals,
- scan_ts)
- - sizeof(__s64)]));
- }
- }
-
- /* Stop the ring buffer */
- ret = write_sysfs_int("enable", buf_dir_name, 0);
- if (ret < 0)
- goto error_close_buffer_event;
-
- /* Disconnect from the trigger - just write a dummy name.*/
- write_sysfs_string("trigger/current_trigger",
- dev_dir_name, "NULL");
-
-error_close_buffer_event:
- fclose(fp_ev);
-error_close_buffer_access:
- close(fp);
-error_free_data:
- free(data);
-error_free_buffer_access:
- free(buffer_access);
-error_free_buffer_event:
- free(buffer_event);
-error_free_buf_dir_name:
- free(buf_dir_name);
-error_free_triggername:
- free(trigger_name);
-error_free_dev_dir_name:
- free(dev_dir_name);
-error_ret:
- return ret;
-}
projects / platform / adaptation / renesas_rcar / renesas_kernel.git / commitdiff