ARM: dts: imx6: Add support for phyBOARD-Mira with i.MX 6QuadPlus

Add support for the PHYTEC phyBOARD-Mira with i.MX 6QuadPlus with NAND.
It is based on the phyBOARD-Mira with i.MX 6Quad/Dual and supports the
same interfaces.

Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Stefan Lengfeld <s.lengfeld@phytec.de>
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index b21ec06..e1c8954 100644 (file)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -497,6 +497,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
        imx6q-zii-rdu2.dtb \
        imx6qp-nitrogen6_max.dtb \
        imx6qp-nitrogen6_som2.dtb \
+       imx6qp-phytec-mira-rdk-nand.dtb \
        imx6qp-sabreauto.dtb \
        imx6qp-sabresd.dtb \
        imx6qp-tx6qp-8037.dtb \

diff --git a/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts b/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts
new file mode 100644 (file)
index 0000000..3618e53
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qp-phytec-mira-rdk-nand.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 PHYTEC Messtechnik GmbH
+ * Author: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
+ */
+
+/dts-v1/;
+#include "imx6qp.dtsi"
+#include "imx6qdl-phytec-phycore-som.dtsi"
+#include "imx6qdl-phytec-mira.dtsi"
+
+/ {
+       model = "PHYTEC phyBOARD-Mira QuadPlus Carrier-Board with NAND";
+       compatible = "phytec,imx6qp-pbac06-nand", "phytec,imx6qp-pbac06",
+                    "phytec,imx6qdl-pcm058", "fsl,imx6qp";
+
+       chosen {
+               linux,stdout-path = &uart2;
+       };
+};
+
+&can1 {
+       status = "okay";
+};
+
+&fec {
+       status = "okay";
+};
+
+&gpmi {
+       status = "okay";
+};
+
+&hdmi {
+       status = "okay";
+};
+
+&i2c1 {
+       status = "okay";
+};
+
+&i2c2 {
+       status = "okay";
+};
+
+&i2c_rtc {
+       status = "okay";
+};
+
+&m25p80 {
+       status = "okay";
+};
+
+&pcie {
+       status = "okay";
+};
+
+&uart3 {
+       status = "okay";
+};
+
+&usbh1 {
+       status = "okay";
+};
+
+&usbotg {
+       status = "okay";
+};
+
+&usdhc1 {
+       status = "okay";
+};