--- /dev/null
+dm-dust
+=======
+
+This target emulates the behavior of bad sectors at arbitrary
+locations, and the ability to enable the emulation of the failures
+at an arbitrary time.
+
+This target behaves similarly to a linear target. At a given time,
+the user can send a message to the target to start failing read
+requests on specific blocks (to emulate the behavior of a hard disk
+drive with bad sectors).
+
+When the failure behavior is enabled (i.e.: when the output of
+"dmsetup status" displays "fail_read_on_bad_block"), reads of blocks
+in the "bad block list" will fail with EIO ("Input/output error").
+
+Writes of blocks in the "bad block list will result in the following:
+
+1. Remove the block from the "bad block list".
+2. Successfully complete the write.
+
+This emulates the "remapped sector" behavior of a drive with bad
+sectors.
+
+Normally, a drive that is encountering bad sectors will most likely
+encounter more bad sectors, at an unknown time or location.
+With dm-dust, the user can use the "addbadblock" and "removebadblock"
+messages to add arbitrary bad blocks at new locations, and the
+"enable" and "disable" messages to modulate the state of whether the
+configured "bad blocks" will be treated as bad, or bypassed.
+This allows the pre-writing of test data and metadata prior to
+simulating a "failure" event where bad sectors start to appear.
+
+Table parameters:
+-----------------
+<device_path> <offset> <blksz>
+
+Mandatory parameters:
+ <device_path>: path to the block device.
+ <offset>: offset to data area from start of device_path
+ <blksz>: block size in bytes
+ (minimum 512, maximum 1073741824, must be a power of 2)
+
+Usage instructions:
+-------------------
+
+First, find the size (in 512-byte sectors) of the device to be used:
+
+$ sudo blockdev --getsz /dev/vdb1
+33552384
+
+Create the dm-dust device:
+(For a device with a block size of 512 bytes)
+$ sudo dmsetup create dust1 --table '0 33552384 dust /dev/vdb1 0 512'
+
+(For a device with a block size of 4096 bytes)
+$ sudo dmsetup create dust1 --table '0 33552384 dust /dev/vdb1 0 4096'
+
+Check the status of the read behavior ("bypass" indicates that all I/O
+will be passed through to the underlying device):
+$ sudo dmsetup status dust1
+0 33552384 dust 252:17 bypass
+
+$ sudo dd if=/dev/mapper/dust1 of=/dev/null bs=512 count=128 iflag=direct
+128+0 records in
+128+0 records out
+
+$ sudo dd if=/dev/zero of=/dev/mapper/dust1 bs=512 count=128 oflag=direct
+128+0 records in
+128+0 records out
+
+Adding and removing bad blocks:
+-------------------------------
+
+At any time (i.e.: whether the device has the "bad block" emulation
+enabled or disabled), bad blocks may be added or removed from the
+device via the "addbadblock" and "removebadblock" messages:
+
+$ sudo dmsetup message dust1 0 addbadblock 60
+kernel: device-mapper: dust: badblock added at block 60
+
+$ sudo dmsetup message dust1 0 addbadblock 67
+kernel: device-mapper: dust: badblock added at block 67
+
+$ sudo dmsetup message dust1 0 addbadblock 72
+kernel: device-mapper: dust: badblock added at block 72
+
+These bad blocks will be stored in the "bad block list".
+While the device is in "bypass" mode, reads and writes will succeed:
+
+$ sudo dmsetup status dust1
+0 33552384 dust 252:17 bypass
+
+Enabling block read failures:
+-----------------------------
+
+To enable the "fail read on bad block" behavior, send the "enable" message:
+
+$ sudo dmsetup message dust1 0 enable
+kernel: device-mapper: dust: enabling read failures on bad sectors
+
+$ sudo dmsetup status dust1
+0 33552384 dust 252:17 fail_read_on_bad_block
+
+With the device in "fail read on bad block" mode, attempting to read a
+block will encounter an "Input/output error":
+
+$ sudo dd if=/dev/mapper/dust1 of=/dev/null bs=512 count=1 skip=67 iflag=direct
+dd: error reading '/dev/mapper/dust1': Input/output error
+0+0 records in
+0+0 records out
+0 bytes copied, 0.00040651 s, 0.0 kB/s
+
+...and writing to the bad blocks will remove the blocks from the list,
+therefore emulating the "remap" behavior of hard disk drives:
+
+$ sudo dd if=/dev/zero of=/dev/mapper/dust1 bs=512 count=128 oflag=direct
+128+0 records in
+128+0 records out
+
+kernel: device-mapper: dust: block 60 removed from badblocklist by write
+kernel: device-mapper: dust: block 67 removed from badblocklist by write
+kernel: device-mapper: dust: block 72 removed from badblocklist by write
+kernel: device-mapper: dust: block 87 removed from badblocklist by write
+
+Bad block add/remove error handling:
+------------------------------------
+
+Attempting to add a bad block that already exists in the list will
+result in an "Invalid argument" error, as well as a helpful message:
+
+$ sudo dmsetup message dust1 0 addbadblock 88
+device-mapper: message ioctl on dust1 failed: Invalid argument
+kernel: device-mapper: dust: block 88 already in badblocklist
+
+Attempting to remove a bad block that doesn't exist in the list will
+result in an "Invalid argument" error, as well as a helpful message:
+
+$ sudo dmsetup message dust1 0 removebadblock 87
+device-mapper: message ioctl on dust1 failed: Invalid argument
+kernel: device-mapper: dust: block 87 not found in badblocklist
+
+Counting the number of bad blocks in the bad block list:
+--------------------------------------------------------
+
+To count the number of bad blocks configured in the device, run the
+following message command:
+
+$ sudo dmsetup message dust1 0 countbadblocks
+
+A message will print with the number of bad blocks currently
+configured on the device:
+
+kernel: device-mapper: dust: countbadblocks: 895 badblock(s) found
+
+Querying for specific bad blocks:
+---------------------------------
+
+To find out if a specific block is in the bad block list, run the
+following message command:
+
+$ sudo dmsetup message dust1 0 queryblock 72
+
+The following message will print if the block is in the list:
+device-mapper: dust: queryblock: block 72 found in badblocklist
+
+The following message will print if the block is in the list:
+device-mapper: dust: queryblock: block 72 not found in badblocklist
+
+The "queryblock" message command will work in both the "enabled"
+and "disabled" modes, allowing the verification of whether a block
+will be treated as "bad" without having to issue I/O to the device,
+or having to "enable" the bad block emulation.
+
+Clearing the bad block list:
+----------------------------
+
+To clear the bad block list (without needing to individually run
+a "removebadblock" message command for every block), run the
+following message command:
+
+$ sudo dmsetup message dust1 0 clearbadblocks
+
+After clearing the bad block list, the following message will appear:
+
+kernel: device-mapper: dust: clearbadblocks: badblocks cleared
+
+If there were no bad blocks to clear, the following message will
+appear:
+
+kernel: device-mapper: dust: clearbadblocks: no badblocks found
+
+Message commands list:
+----------------------
+
+Below is a list of the messages that can be sent to a dust device:
+
+Operations on blocks (requires a <blknum> argument):
+
+addbadblock <blknum>
+queryblock <blknum>
+removebadblock <blknum>
+
+...where <blknum> is a block number within range of the device
+ (corresponding to the block size of the device.)
+
+Single argument message commands:
+
+countbadblocks
+clearbadblocks
+disable
+enable
+quiet
+
+Device removal:
+---------------
+
+When finished, remove the device via the "dmsetup remove" command:
+
+$ sudo dmsetup remove dust1
+
+Quiet mode:
+-----------
+
+On test runs with many bad blocks, it may be desirable to avoid
+excessive logging (from bad blocks added, removed, or "remapped").
+This can be done by enabling "quiet mode" via the following message:
+
+$ sudo dmsetup message dust1 0 quiet
+
+This will suppress log messages from add / remove / removed by write
+operations. Log messages from "countbadblocks" or "queryblock"
+message commands will still print in quiet mode.
+
+The status of quiet mode can be seen by running "dmsetup status":
+
+$ sudo dmsetup status dust1
+0 33552384 dust 252:17 fail_read_on_bad_block quiet
+
+To disable quiet mode, send the "quiet" message again:
+
+$ sudo dmsetup message dust1 0 quiet
+
+$ sudo dmsetup status dust1
+0 33552384 dust 252:17 fail_read_on_bad_block verbose
+
+(The presence of "verbose" indicates normal logging.)
+
+"Why not...?"
+-------------
+
+scsi_debug has a "medium error" mode that can fail reads on one
+specified sector (sector 0x1234, hardcoded in the source code), but
+it uses RAM for the persistent storage, which drastically decreases
+the potential device size.
+
+dm-flakey fails all I/O from all block locations at a specified time
+frequency, and not a given point in time.
+
+When a bad sector occurs on a hard disk drive, reads to that sector
+are failed by the device, usually resulting in an error code of EIO
+("I/O error") or ENODATA ("No data available"). However, a write to
+the sector may succeed, and result in the sector becoming readable
+after the device controller no longer experiences errors reading the
+sector (or after a reallocation of the sector). However, there may
+be bad sectors that occur on the device in the future, in a different,
+unpredictable location.
+
+This target seeks to provide a device that can exhibit the behavior
+of a bad sector at a known sector location, at a known time, based
+on a large storage device (at least tens of gigabytes, not occupying
+system memory).
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 Red Hat, Inc.
+ *
+ * This is a test "dust" device, which fails reads on specified
+ * sectors, emulating the behavior of a hard disk drive sending
+ * a "Read Medium Error" sense.
+ *
+ */
+
+#include <linux/device-mapper.h>
+#include <linux/module.h>
+#include <linux/rbtree.h>
+
+#define DM_MSG_PREFIX "dust"
+
+struct badblock {
+ struct rb_node node;
+ sector_t bb;
+};
+
+struct dust_device {
+ struct dm_dev *dev;
+ struct rb_root badblocklist;
+ unsigned long long badblock_count;
+ spinlock_t dust_lock;
+ unsigned int blksz;
+ unsigned int sect_per_block;
+ sector_t start;
+ bool fail_read_on_bb:1;
+ bool quiet_mode:1;
+};
+
+static struct badblock *dust_rb_search(struct rb_root *root, sector_t blk)
+{
+ struct rb_node *node = root->rb_node;
+
+ while (node) {
+ struct badblock *bblk = rb_entry(node, struct badblock, node);
+
+ if (bblk->bb > blk)
+ node = node->rb_left;
+ else if (bblk->bb < blk)
+ node = node->rb_right;
+ else
+ return bblk;
+ }
+
+ return NULL;
+}
+
+static bool dust_rb_insert(struct rb_root *root, struct badblock *new)
+{
+ struct badblock *bblk;
+ struct rb_node **link = &root->rb_node, *parent = NULL;
+ sector_t value = new->bb;
+
+ while (*link) {
+ parent = *link;
+ bblk = rb_entry(parent, struct badblock, node);
+
+ if (bblk->bb > value)
+ link = &(*link)->rb_left;
+ else if (bblk->bb < value)
+ link = &(*link)->rb_right;
+ else
+ return false;
+ }
+
+ rb_link_node(&new->node, parent, link);
+ rb_insert_color(&new->node, root);
+
+ return true;
+}
+
+static int dust_remove_block(struct dust_device *dd, unsigned long long block)
+{
+ struct badblock *bblock;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dd->dust_lock, flags);
+ bblock = dust_rb_search(&dd->badblocklist, block * dd->sect_per_block);
+
+ if (bblock == NULL) {
+ if (!dd->quiet_mode) {
+ DMERR("%s: block %llu not found in badblocklist",
+ __func__, block);
+ }
+ spin_unlock_irqrestore(&dd->dust_lock, flags);
+ return -EINVAL;
+ }
+
+ rb_erase(&bblock->node, &dd->badblocklist);
+ dd->badblock_count--;
+ if (!dd->quiet_mode)
+ DMINFO("%s: badblock removed at block %llu", __func__, block);
+ kfree(bblock);
+ spin_unlock_irqrestore(&dd->dust_lock, flags);
+
+ return 0;
+}
+
+static int dust_add_block(struct dust_device *dd, unsigned long long block)
+{
+ struct badblock *bblock;
+ unsigned long flags;
+
+ bblock = kmalloc(sizeof(*bblock), GFP_KERNEL);
+ if (bblock == NULL) {
+ if (!dd->quiet_mode)
+ DMERR("%s: badblock allocation failed", __func__);
+ return -ENOMEM;
+ }
+
+ spin_lock_irqsave(&dd->dust_lock, flags);
+ bblock->bb = block * dd->sect_per_block;
+ if (!dust_rb_insert(&dd->badblocklist, bblock)) {
+ if (!dd->quiet_mode) {
+ DMERR("%s: block %llu already in badblocklist",
+ __func__, block);
+ }
+ spin_unlock_irqrestore(&dd->dust_lock, flags);
+ kfree(bblock);
+ return -EINVAL;
+ }
+
+ dd->badblock_count++;
+ if (!dd->quiet_mode)
+ DMINFO("%s: badblock added at block %llu", __func__, block);
+ spin_unlock_irqrestore(&dd->dust_lock, flags);
+
+ return 0;
+}
+
+static int dust_query_block(struct dust_device *dd, unsigned long long block)
+{
+ struct badblock *bblock;
+ unsigned long flags;
+
+ spin_lock_irqsave(&dd->dust_lock, flags);
+ bblock = dust_rb_search(&dd->badblocklist, block * dd->sect_per_block);
+ if (bblock != NULL)
+ DMINFO("%s: block %llu found in badblocklist", __func__, block);
+ else
+ DMINFO("%s: block %llu not found in badblocklist", __func__, block);
+ spin_unlock_irqrestore(&dd->dust_lock, flags);
+
+ return 0;
+}
+
+static int __dust_map_read(struct dust_device *dd, sector_t thisblock)
+{
+ struct badblock *bblk = dust_rb_search(&dd->badblocklist, thisblock);
+
+ if (bblk)
+ return DM_MAPIO_KILL;
+
+ return DM_MAPIO_REMAPPED;
+}
+
+static int dust_map_read(struct dust_device *dd, sector_t thisblock,
+ bool fail_read_on_bb)
+{
+ unsigned long flags;
+ int ret = DM_MAPIO_REMAPPED;
+
+ if (fail_read_on_bb) {
+ spin_lock_irqsave(&dd->dust_lock, flags);
+ ret = __dust_map_read(dd, thisblock);
+ spin_unlock_irqrestore(&dd->dust_lock, flags);
+ }
+
+ return ret;
+}
+
+static void __dust_map_write(struct dust_device *dd, sector_t thisblock)
+{
+ struct badblock *bblk = dust_rb_search(&dd->badblocklist, thisblock);
+
+ if (bblk) {
+ rb_erase(&bblk->node, &dd->badblocklist);
+ dd->badblock_count--;
+ kfree(bblk);
+ if (!dd->quiet_mode) {
+ sector_div(thisblock, dd->sect_per_block);
+ DMINFO("block %llu removed from badblocklist by write",
+ (unsigned long long)thisblock);
+ }
+ }
+}
+
+static int dust_map_write(struct dust_device *dd, sector_t thisblock,
+ bool fail_read_on_bb)
+{
+ unsigned long flags;
+
+ if (fail_read_on_bb) {
+ spin_lock_irqsave(&dd->dust_lock, flags);
+ __dust_map_write(dd, thisblock);
+ spin_unlock_irqrestore(&dd->dust_lock, flags);
+ }
+
+ return DM_MAPIO_REMAPPED;
+}
+
+static int dust_map(struct dm_target *ti, struct bio *bio)
+{
+ struct dust_device *dd = ti->private;
+ int ret;
+
+ bio_set_dev(bio, dd->dev->bdev);
+ bio->bi_iter.bi_sector = dd->start + dm_target_offset(ti, bio->bi_iter.bi_sector);
+
+ if (bio_data_dir(bio) == READ)
+ ret = dust_map_read(dd, bio->bi_iter.bi_sector, dd->fail_read_on_bb);
+ else
+ ret = dust_map_write(dd, bio->bi_iter.bi_sector, dd->fail_read_on_bb);
+
+ return ret;
+}
+
+static bool __dust_clear_badblocks(struct rb_root *tree,
+ unsigned long long count)
+{
+ struct rb_node *node = NULL, *nnode = NULL;
+
+ nnode = rb_first(tree);
+ if (nnode == NULL) {
+ BUG_ON(count != 0);
+ return false;
+ }
+
+ while (nnode) {
+ node = nnode;
+ nnode = rb_next(node);
+ rb_erase(node, tree);
+ count--;
+ kfree(node);
+ }
+ BUG_ON(count != 0);
+ BUG_ON(tree->rb_node != NULL);
+
+ return true;
+}
+
+static int dust_clear_badblocks(struct dust_device *dd)
+{
+ unsigned long flags;
+ struct rb_root badblocklist;
+ unsigned long long badblock_count;
+
+ spin_lock_irqsave(&dd->dust_lock, flags);
+ badblocklist = dd->badblocklist;
+ badblock_count = dd->badblock_count;
+ dd->badblocklist = RB_ROOT;
+ dd->badblock_count = 0;
+ spin_unlock_irqrestore(&dd->dust_lock, flags);
+
+ if (!__dust_clear_badblocks(&badblocklist, badblock_count))
+ DMINFO("%s: no badblocks found", __func__);
+ else
+ DMINFO("%s: badblocks cleared", __func__);
+
+ return 0;
+}
+
+/*
+ * Target parameters:
+ *
+ * <device_path> <offset> <blksz>
+ *
+ * device_path: path to the block device
+ * offset: offset to data area from start of device_path
+ * blksz: block size (minimum 512, maximum 1073741824, must be a power of 2)
+ */
+static int dust_ctr(struct dm_target *ti, unsigned int argc, char **argv)
+{
+ struct dust_device *dd;
+ unsigned long long tmp;
+ char dummy;
+ unsigned int blksz;
+ unsigned int sect_per_block;
+ sector_t DUST_MAX_BLKSZ_SECTORS = 2097152;
+ sector_t max_block_sectors = min(ti->len, DUST_MAX_BLKSZ_SECTORS);
+
+ if (argc != 3) {
+ ti->error = "Invalid argument count";
+ return -EINVAL;
+ }
+
+ if (kstrtouint(argv[2], 10, &blksz) || !blksz) {
+ ti->error = "Invalid block size parameter";
+ return -EINVAL;
+ }
+
+ if (blksz < 512) {
+ ti->error = "Block size must be at least 512";
+ return -EINVAL;
+ }
+
+ if (!is_power_of_2(blksz)) {
+ ti->error = "Block size must be a power of 2";
+ return -EINVAL;
+ }
+
+ if (to_sector(blksz) > max_block_sectors) {
+ ti->error = "Block size is too large";
+ return -EINVAL;
+ }
+
+ sect_per_block = (blksz >> SECTOR_SHIFT);
+
+ if (sscanf(argv[1], "%llu%c", &tmp, &dummy) != 1 || tmp != (sector_t)tmp) {
+ ti->error = "Invalid device offset sector";
+ return -EINVAL;
+ }
+
+ dd = kzalloc(sizeof(struct dust_device), GFP_KERNEL);
+ if (dd == NULL) {
+ ti->error = "Cannot allocate context";
+ return -ENOMEM;
+ }
+
+ if (dm_get_device(ti, argv[0], dm_table_get_mode(ti->table), &dd->dev)) {
+ ti->error = "Device lookup failed";
+ kfree(dd);
+ return -EINVAL;
+ }
+
+ dd->sect_per_block = sect_per_block;
+ dd->blksz = blksz;
+ dd->start = tmp;
+
+ /*
+ * Whether to fail a read on a "bad" block.
+ * Defaults to false; enabled later by message.
+ */
+ dd->fail_read_on_bb = false;
+
+ /*
+ * Initialize bad block list rbtree.
+ */
+ dd->badblocklist = RB_ROOT;
+ dd->badblock_count = 0;
+ spin_lock_init(&dd->dust_lock);
+
+ dd->quiet_mode = false;
+
+ BUG_ON(dm_set_target_max_io_len(ti, dd->sect_per_block) != 0);
+
+ ti->num_discard_bios = 1;
+ ti->num_flush_bios = 1;
+ ti->private = dd;
+
+ return 0;
+}
+
+static void dust_dtr(struct dm_target *ti)
+{
+ struct dust_device *dd = ti->private;
+
+ __dust_clear_badblocks(&dd->badblocklist, dd->badblock_count);
+ dm_put_device(ti, dd->dev);
+ kfree(dd);
+}
+
+static int dust_message(struct dm_target *ti, unsigned int argc, char **argv,
+ char *result_buf, unsigned int maxlen)
+{
+ struct dust_device *dd = ti->private;
+ sector_t size = i_size_read(dd->dev->bdev->bd_inode) >> SECTOR_SHIFT;
+ bool invalid_msg = false;
+ int result = -EINVAL;
+ unsigned long long tmp, block;
+ unsigned long flags;
+ char dummy;
+
+ if (argc == 1) {
+ if (!strcasecmp(argv[0], "addbadblock") ||
+ !strcasecmp(argv[0], "removebadblock") ||
+ !strcasecmp(argv[0], "queryblock")) {
+ DMERR("%s requires an additional argument", argv[0]);
+ } else if (!strcasecmp(argv[0], "disable")) {
+ DMINFO("disabling read failures on bad sectors");
+ dd->fail_read_on_bb = false;
+ result = 0;
+ } else if (!strcasecmp(argv[0], "enable")) {
+ DMINFO("enabling read failures on bad sectors");
+ dd->fail_read_on_bb = true;
+ result = 0;
+ } else if (!strcasecmp(argv[0], "countbadblocks")) {
+ spin_lock_irqsave(&dd->dust_lock, flags);
+ DMINFO("countbadblocks: %llu badblock(s) found",
+ dd->badblock_count);
+ spin_unlock_irqrestore(&dd->dust_lock, flags);
+ result = 0;
+ } else if (!strcasecmp(argv[0], "clearbadblocks")) {
+ result = dust_clear_badblocks(dd);
+ } else if (!strcasecmp(argv[0], "quiet")) {
+ if (!dd->quiet_mode)
+ dd->quiet_mode = true;
+ else
+ dd->quiet_mode = false;
+ result = 0;
+ } else {
+ invalid_msg = true;
+ }
+ } else if (argc == 2) {
+ if (sscanf(argv[1], "%llu%c", &tmp, &dummy) != 1)
+ return result;
+
+ block = tmp;
+ sector_div(size, dd->sect_per_block);
+ if (block > size || block < 0) {
+ DMERR("selected block value out of range");
+ return result;
+ }
+
+ if (!strcasecmp(argv[0], "addbadblock"))
+ result = dust_add_block(dd, block);
+ else if (!strcasecmp(argv[0], "removebadblock"))
+ result = dust_remove_block(dd, block);
+ else if (!strcasecmp(argv[0], "queryblock"))
+ result = dust_query_block(dd, block);
+ else
+ invalid_msg = true;
+
+ } else
+ DMERR("invalid number of arguments '%d'", argc);
+
+ if (invalid_msg)
+ DMERR("unrecognized message '%s' received", argv[0]);
+
+ return result;
+}
+
+static void dust_status(struct dm_target *ti, status_type_t type,
+ unsigned int status_flags, char *result, unsigned int maxlen)
+{
+ struct dust_device *dd = ti->private;
+ unsigned int sz = 0;
+
+ switch (type) {
+ case STATUSTYPE_INFO:
+ DMEMIT("%s %s %s", dd->dev->name,
+ dd->fail_read_on_bb ? "fail_read_on_bad_block" : "bypass",
+ dd->quiet_mode ? "quiet" : "verbose");
+ break;
+
+ case STATUSTYPE_TABLE:
+ DMEMIT("%s %llu %u", dd->dev->name,
+ (unsigned long long)dd->start, dd->blksz);
+ break;
+ }
+}
+
+static int dust_prepare_ioctl(struct dm_target *ti, struct block_device **bdev)
+{
+ struct dust_device *dd = ti->private;
+ struct dm_dev *dev = dd->dev;
+
+ *bdev = dev->bdev;
+
+ /*
+ * Only pass ioctls through if the device sizes match exactly.
+ */
+ if (dd->start ||
+ ti->len != i_size_read(dev->bdev->bd_inode) >> SECTOR_SHIFT)
+ return 1;
+
+ return 0;
+}
+
+static int dust_iterate_devices(struct dm_target *ti, iterate_devices_callout_fn fn,
+ void *data)
+{
+ struct dust_device *dd = ti->private;
+
+ return fn(ti, dd->dev, dd->start, ti->len, data);
+}
+
+static struct target_type dust_target = {
+ .name = "dust",
+ .version = {1, 0, 0},
+ .module = THIS_MODULE,
+ .ctr = dust_ctr,
+ .dtr = dust_dtr,
+ .iterate_devices = dust_iterate_devices,
+ .map = dust_map,
+ .message = dust_message,
+ .status = dust_status,
+ .prepare_ioctl = dust_prepare_ioctl,
+};
+
+int __init dm_dust_init(void)
+{
+ int result = dm_register_target(&dust_target);
+
+ if (result < 0)
+ DMERR("dm_register_target failed %d", result);
+
+ return result;
+}
+
+void __exit dm_dust_exit(void)
+{
+ dm_unregister_target(&dust_target);
+}
+
+module_init(dm_dust_init);
+module_exit(dm_dust_exit);
+
+MODULE_DESCRIPTION(DM_NAME " dust test target");
+MODULE_AUTHOR("Bryan Gurney <dm-devel@redhat.com>");
+MODULE_LICENSE("GPL");