fsl-i2c: fix writes to data segment before relocation

Prevent i2c_init() in fsl_i2c.c from writing to the data segment before
relocation.  Commit d8c82db4 added the ability for i2c_init() to program the
I2C bus speed and save the value in i2c_bus_speed[], which is a global
variable.  It is an error to write to the data segment before relocation,
which is what i2c_init() does when it stores the bus speed in i2c_bus_speed[].

Signed-off-by: Timur Tabi <timur@freescale.com>

diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c
index 9f2c1ec..9d5df8a 100644 (file)
--- a/drivers/i2c/fsl_i2c.c
+++ b/drivers/i2c/fsl_i2c.c
@@ -143,12 +143,15 @@ void
 i2c_init(int speed, int slaveadd)
 {
        struct fsl_i2c *dev;
+       unsigned int temp;
 
        dev = (struct fsl_i2c *) (CFG_IMMR + CFG_I2C_OFFSET);
 
        writeb(0, &dev->cr);                    /* stop I2C controller */
        udelay(5);                              /* let it shutdown in peace */
-       i2c_bus_speed[0] = set_i2c_bus_speed(dev, gd->i2c1_clk, speed);
+       temp = set_i2c_bus_speed(dev, gd->i2c1_clk, speed);
+       if (gd->flags & GD_FLG_RELOC)
+               i2c_bus_speed[0] = temp;
        writeb(slaveadd << 1, &dev->adr);       /* write slave address */
        writeb(0x0, &dev->sr);                  /* clear status register */
        writeb(I2C_CR_MEN, &dev->cr);           /* start I2C controller */
@@ -158,7 +161,9 @@ i2c_init(int speed, int slaveadd)
 
        writeb(0, &dev->cr);                    /* stop I2C controller */
        udelay(5);                              /* let it shutdown in peace */
-       i2c_bus_speed[1] = set_i2c_bus_speed(dev, gd->i2c2_clk, speed);
+       temp = set_i2c_bus_speed(dev, gd->i2c2_clk, speed);
+       if (gd->flags & GD_FLG_RELOC)
+               i2c_bus_speed[1] = temp;
        writeb(slaveadd << 1, &dev->adr);       /* write slave address */
        writeb(0x0, &dev->sr);                  /* clear status register */
        writeb(I2C_CR_MEN, &dev->cr);           /* start I2C controller */