ASoC: rt715-sdca: enable pm_runtime in probe, keep status as 'suspended'

This patch suggests enabling pm_runtime during the probe, but marking the
device as 'active' only after it is enumerated. That will force a
dependency between the card and the codec, pm_runtime_get_sync() will
have to wait for the codec device to resume and hence implicitly wait
for the enumeration/initialization to be completed. In the nominal
case where the codec device is already active the get_sync() would
only perform a ref-count increase.

The changes are directly inspired by RT711 and RT711-sdca changes.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20230802153629.53576-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>

diff --git a/sound/soc/codecs/rt715-sdca-sdw.c b/sound/soc/codecs/rt715-sdca-sdw.c
index df10916..ab54a67 100644 (file)
--- a/sound/soc/codecs/rt715-sdca-sdw.c
+++ b/sound/soc/codecs/rt715-sdca-sdw.c
@@ -193,10 +193,7 @@ static int rt715_sdca_sdw_probe(struct sdw_slave *slave,
 
 static int rt715_sdca_sdw_remove(struct sdw_slave *slave)
 {
-       struct rt715_sdca_priv *rt715 = dev_get_drvdata(&slave->dev);
-
-       if (rt715->first_hw_init)
-               pm_runtime_disable(&slave->dev);
+       pm_runtime_disable(&slave->dev);
 
        return 0;
 }

diff --git a/sound/soc/codecs/rt715-sdca.c b/sound/soc/codecs/rt715-sdca.c
index 176340a..9fa96fd 100644 (file)
--- a/sound/soc/codecs/rt715-sdca.c
+++ b/sound/soc/codecs/rt715-sdca.c
@@ -761,8 +761,12 @@ static const struct snd_soc_dapm_route rt715_sdca_audio_map[] = {
 
 static int rt715_sdca_probe(struct snd_soc_component *component)
 {
+       struct rt715_sdca_priv *rt715 = snd_soc_component_get_drvdata(component);
        int ret;
 
+       if (!rt715->first_hw_init)
+               return 0;
+
        ret = pm_runtime_resume(component->dev);
        if (ret < 0 && ret != -EACCES)
                return ret;
@@ -992,6 +996,25 @@ int rt715_sdca_init(struct device *dev, struct regmap *mbq_regmap,
                        &soc_codec_dev_rt715_sdca,
                        rt715_sdca_dai,
                        ARRAY_SIZE(rt715_sdca_dai));
+       if (ret < 0)
+               return ret;
+
+       /* set autosuspend parameters */
+       pm_runtime_set_autosuspend_delay(dev, 3000);
+       pm_runtime_use_autosuspend(dev);
+
+       /* make sure the device does not suspend immediately */
+       pm_runtime_mark_last_busy(dev);
+
+       pm_runtime_enable(dev);
+
+       /* important note: the device is NOT tagged as 'active' and will remain
+        * 'suspended' until the hardware is enumerated/initialized. This is required
+        * to make sure the ASoC framework use of pm_runtime_get_sync() does not silently
+        * fail with -EACCESS because of race conditions between card creation and enumeration
+        */
+
+       dev_dbg(dev, "%s\n", __func__);
 
        return ret;
 }
@@ -1008,21 +1031,12 @@ int rt715_sdca_io_init(struct device *dev, struct sdw_slave *slave)
        regcache_cache_only(rt715->mbq_regmap, false);
 
        /*
-        * PM runtime is only enabled when a Slave reports as Attached
+        * PM runtime status is marked as 'active' only when a Slave reports as Attached
         */
        if (!rt715->first_hw_init) {
-               /* set autosuspend parameters */
-               pm_runtime_set_autosuspend_delay(&slave->dev, 3000);
-               pm_runtime_use_autosuspend(&slave->dev);
-
                /* update count of parent 'active' children */
                pm_runtime_set_active(&slave->dev);
 
-               /* make sure the device does not suspend immediately */
-               pm_runtime_mark_last_busy(&slave->dev);
-
-               pm_runtime_enable(&slave->dev);
-
                rt715->first_hw_init = true;
        }