drm/i915: Setup DDI clk for MST on SKL

Set up the DDI->PLL mapping on SKL also for MST links. Might help make
MST operational on SKL.

v2: Rebased due to KBL
    Improve the patch subject, Jesse provided the new one

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1439826380-18403-1-git-send-email-ville.syrjala@linux.intel.com
References: https://bugs.freedesktop.org/show_bug.cgi?id=91791
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>

diff --git a/drivers/gpu/drm/i915/intel_ddi.c b/drivers/gpu/drm/i915/intel_ddi.c
index 50cadba..da46edd 100644 (file)
--- a/drivers/gpu/drm/i915/intel_ddi.c
+++ b/drivers/gpu/drm/i915/intel_ddi.c
@@ -2259,30 +2259,21 @@ uint32_t ddi_signal_levels(struct intel_dp *intel_dp)
        return DDI_BUF_TRANS_SELECT(level);
 }
 
-static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder)
+void intel_ddi_clk_select(struct intel_encoder *encoder,
+                         const struct intel_crtc_state *pipe_config)
 {
-       struct drm_encoder *encoder = &intel_encoder->base;
-       struct drm_device *dev = encoder->dev;
-       struct drm_i915_private *dev_priv = dev->dev_private;
-       struct intel_crtc *crtc = to_intel_crtc(encoder->crtc);
-       enum port port = intel_ddi_get_encoder_port(intel_encoder);
-       int type = intel_encoder->type;
-       int hdmi_level;
-
-       if (type == INTEL_OUTPUT_EDP) {
-               struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
-               intel_edp_panel_on(intel_dp);
-       }
+       struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
+       enum port port = intel_ddi_get_encoder_port(encoder);
 
-       if (IS_SKYLAKE(dev) || IS_KABYLAKE(dev)) {
-               uint32_t dpll = crtc->config->ddi_pll_sel;
+       if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv)) {
+               uint32_t dpll = pipe_config->ddi_pll_sel;
                uint32_t val;
 
                /*
                 * DPLL0 is used for eDP and is the only "private" DPLL (as
                 * opposed to shared) on SKL
                 */
-               if (type == INTEL_OUTPUT_EDP) {
+               if (encoder->type == INTEL_OUTPUT_EDP) {
                        WARN_ON(dpll != SKL_DPLL0);
 
                        val = I915_READ(DPLL_CTRL1);
@@ -2290,7 +2281,7 @@ static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder)
                        val &= ~(DPLL_CTRL1_HDMI_MODE(dpll) |
                                 DPLL_CTRL1_SSC(dpll) |
                                 DPLL_CTRL1_LINK_RATE_MASK(dpll));
-                       val |= crtc->config->dpll_hw_state.ctrl1 << (dpll * 6);
+                       val |= pipe_config->dpll_hw_state.ctrl1 << (dpll * 6);
 
                        I915_WRITE(DPLL_CTRL1, val);
                        POSTING_READ(DPLL_CTRL1);
@@ -2306,11 +2297,29 @@ static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder)
 
                I915_WRITE(DPLL_CTRL2, val);
 
-       } else if (INTEL_INFO(dev)->gen < 9) {
-               WARN_ON(crtc->config->ddi_pll_sel == PORT_CLK_SEL_NONE);
-               I915_WRITE(PORT_CLK_SEL(port), crtc->config->ddi_pll_sel);
+       } else if (INTEL_INFO(dev_priv)->gen < 9) {
+               WARN_ON(pipe_config->ddi_pll_sel == PORT_CLK_SEL_NONE);
+               I915_WRITE(PORT_CLK_SEL(port), pipe_config->ddi_pll_sel);
+       }
+}
+
+static void intel_ddi_pre_enable(struct intel_encoder *intel_encoder)
+{
+       struct drm_encoder *encoder = &intel_encoder->base;
+       struct drm_device *dev = encoder->dev;
+       struct drm_i915_private *dev_priv = dev->dev_private;
+       struct intel_crtc *crtc = to_intel_crtc(encoder->crtc);
+       enum port port = intel_ddi_get_encoder_port(intel_encoder);
+       int type = intel_encoder->type;
+       int hdmi_level;
+
+       if (type == INTEL_OUTPUT_EDP) {
+               struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
+               intel_edp_panel_on(intel_dp);
        }
 
+       intel_ddi_clk_select(intel_encoder, crtc->config);
+
        if (type == INTEL_OUTPUT_DISPLAYPORT || type == INTEL_OUTPUT_EDP) {
                struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
 

diff --git a/drivers/gpu/drm/i915/intel_dp_mst.c b/drivers/gpu/drm/i915/intel_dp_mst.c
index 1537259..8a604ac 100644 (file)
--- a/drivers/gpu/drm/i915/intel_dp_mst.c
+++ b/drivers/gpu/drm/i915/intel_dp_mst.c
@@ -173,20 +173,14 @@ static void intel_mst_pre_enable_dp(struct intel_encoder *encoder)
        intel_mst->port = found->port;
 
        if (intel_dp->active_mst_links == 0) {
-               enum port port = intel_ddi_get_encoder_port(encoder);
+               intel_ddi_clk_select(encoder, intel_crtc->config);
 
                intel_dp_set_link_params(intel_dp, intel_crtc->config);
 
-               /* FIXME: add support for SKL */
-               if (INTEL_INFO(dev)->gen < 9)
-                       I915_WRITE(PORT_CLK_SEL(port),
-                                  intel_crtc->config->ddi_pll_sel);
-
                intel_ddi_init_dp_buf_reg(&intel_dig_port->base);
 
                intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
 
-
                intel_dp_start_link_train(intel_dp);
                intel_dp_stop_link_train(intel_dp);
        }

diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index f32a594..3f80816 100644 (file)
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -997,6 +997,8 @@ void intel_crt_init(struct drm_device *dev);
 
 
 /* intel_ddi.c */
+void intel_ddi_clk_select(struct intel_encoder *encoder,
+                         const struct intel_crtc_state *pipe_config);
 void intel_prepare_ddi(struct drm_device *dev);
 void hsw_fdi_link_train(struct drm_crtc *crtc);
 void intel_ddi_init(struct drm_device *dev, enum port port);