/* 16 MiB max in 3 byte address mode */
#define MAX_3BYTES_SIZE 0x1000000
+#define SPI_NOR_MAX_ID_LEN 6
+
typedef struct FlashPartInfo {
const char *part_name;
- /* jedec code. (jedec >> 16) & 0xff is the 1st byte, >> 8 the 2nd etc */
- uint32_t jedec;
- /* extended jedec code */
- uint16_t ext_jedec;
+ /*
+ * This array stores the ID bytes.
+ * The first three bytes are the JEDIC ID.
+ * JEDEC ID zero means "no ID" (mostly older chips).
+ */
+ uint8_t id[SPI_NOR_MAX_ID_LEN];
+ uint8_t id_len;
/* there is confusion between manufacturers as to what a sector is. In this
* device model, a "sector" is the size that is erased by the ERASE_SECTOR
* command (opcode 0xd8).
} FlashPartInfo;
/* adapted from linux */
-
-#define INFO(_part_name, _jedec, _ext_jedec, _sector_size, _n_sectors, _flags)\
- .part_name = (_part_name),\
- .jedec = (_jedec),\
- .ext_jedec = (_ext_jedec),\
+/* Used when the "_ext_id" is two bytes at most */
+#define INFO(_part_name, _jedec_id, _ext_id, _sector_size, _n_sectors, _flags)\
+ .part_name = _part_name,\
+ .id = {\
+ ((_jedec_id) >> 16) & 0xff,\
+ ((_jedec_id) >> 8) & 0xff,\
+ (_jedec_id) & 0xff,\
+ ((_ext_id) >> 8) & 0xff,\
+ (_ext_id) & 0xff,\
+ },\
+ .id_len = (!(_jedec_id) ? 0 : (3 + ((_ext_id) ? 2 : 0))),\
+ .sector_size = (_sector_size),\
+ .n_sectors = (_n_sectors),\
+ .page_size = 256,\
+ .flags = (_flags),
+
+#define INFO6(_part_name, _jedec_id, _ext_id, _sector_size, _n_sectors, _flags)\
+ .part_name = _part_name,\
+ .id = {\
+ ((_jedec_id) >> 16) & 0xff,\
+ ((_jedec_id) >> 8) & 0xff,\
+ (_jedec_id) & 0xff,\
+ ((_ext_id) >> 16) & 0xff,\
+ ((_ext_id) >> 8) & 0xff,\
+ (_ext_id) & 0xff,\
+ },\
+ .id_len = 6,\
.sector_size = (_sector_size),\
.n_sectors = (_n_sectors),\
.page_size = 256,\
static inline Manufacturer get_man(Flash *s)
{
- switch (((s->pi->jedec >> 16) & 0xFF)) {
+ switch (s->pi->id[0]) {
case 0x20:
return MAN_NUMONYX;
case 0xEF:
static void decode_new_cmd(Flash *s, uint32_t value)
{
s->cmd_in_progress = value;
+ int i;
DB_PRINT_L(0, "decoded new command:%x\n", value);
if (value != RESET_MEMORY) {
case JEDEC_READ:
DB_PRINT_L(0, "populated jedec code\n");
- s->data[0] = (s->pi->jedec >> 16) & 0xff;
- s->data[1] = (s->pi->jedec >> 8) & 0xff;
- s->data[2] = s->pi->jedec & 0xff;
- if (s->pi->ext_jedec) {
- s->data[3] = (s->pi->ext_jedec >> 8) & 0xff;
- s->data[4] = s->pi->ext_jedec & 0xff;
- s->len = 5;
- } else {
- s->len = 3;
+ for (i = 0; i < s->pi->id_len; i++) {
+ s->data[i] = s->pi->id[i];
}
+
+ s->len = s->pi->id_len;
s->pos = 0;
s->state = STATE_READING_DATA;
break;