#include "pwrseq.h"
#define DEFAULT_CMD6_TIMEOUT_MS 500
+#define MIN_CACHE_EN_TIMEOUT_MS 1600
static const unsigned int tran_exp[] = {
10000, 100000, 1000000, 10000000,
}
/*
- * If cache size is higher than 0, this indicates
- * the existence of cache and it can be turned on.
+ * If cache size is higher than 0, this indicates the existence of cache
+ * and it can be turned on. Note that some eMMCs from Micron has been
+ * reported to need ~800 ms timeout, while enabling the cache after
+ * sudden power failure tests. Let's extend the timeout to a minimum of
+ * DEFAULT_CACHE_EN_TIMEOUT_MS and do it for all cards.
*/
if (card->ext_csd.cache_size > 0) {
+ unsigned int timeout_ms = MIN_CACHE_EN_TIMEOUT_MS;
+
+ timeout_ms = max(card->ext_csd.generic_cmd6_time, timeout_ms);
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_CACHE_CTRL, 1,
- card->ext_csd.generic_cmd6_time);
+ EXT_CSD_CACHE_CTRL, 1, timeout_ms);
if (err && err != -EBADMSG)
goto free_card;