--- /dev/null
+CS42518/CS42528 audio CODEC
+
+Required properties:
+
+ - compatible : must contain one of "cirrus,cs42518" and "cirrus,cs42528"
+
+ - reg : the I2C address of the device for I2C
+
+ - VA-supply, VD-supply, VLS-supply, VLC-supply: power supplies for the device,
+ as covered in Documentation/devicetree/bindings/regulator/regulator.txt
+
+Example:
+
+codec: cs42528@4C {
+ compatible = "cirrus,cs42528";
+ #sound-dai-cells = <0>;
+ codec_name = "cs425x8";
+ reg = <0x1C>;
+ reset_pin = <&gpio GPIOZ_17 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
--- /dev/null
+spidev {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <3340000>;
+};
zii Zodiac Inflight Innovations
zte ZTE Corp.
zyxel ZyXEL Communications Corp.
+rohm
AMLOGIC AVIN DETECT DRIVER
M: Xingyu Chen <xingyu.chen@amlogic.com>
F: drivers/amlogic/input/avin_detect/*
+
+AMLOGIC DTS
+M: Xindong Xu <xindong.xu@amlogic.com>
+F: arch/arm64/boot/dts/amlogic/atom.dts
+F: arch/arm64/boot/dts/amlogic/gxl_sei210_1g.dts
+F: arch/arm64/boot/dts/amlogic/gxl_sei210_2g.dts
+F: arch/arm64/boot/dts/amlogic/mesongxl_sei210.dtsi
+F: arch/arm64/boot/dts/amlogic/partition_mbox_normal_P_32_atom.dtsi
+F: arch/arm64/boot/dts/amlogic/partition_mbox_normal_P_32_sei.dtsi
+F: arch/arm64/boot/dts/amlogic/partition_mbox_normal_sei32bit.dtsi
+
+AMLOGIC ADD CS42528 CODEC DRIVER
+M: Ivan Nie <ivan.nie@amlogic.com>
+F: Documentation/devicetree/bindings/sound/cs42528.txt
+F: sound/soc/codecs/amlogic/cs42528.c
+F: sound/soc/codecs/amlogic/cs42528.h
+
+AMLOGIC SPIDEV
+M: Ivan Nie <Ivan.nie@amlogic.com>
+F: Documentation/devicetree/bindings/spi/spidev.txt
--- /dev/null
+/*
+ * arch/arm64/boot/dts/amlogic/atom.dts
+ *
+ * Copyright (C) 2017 Amlogic, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/meson-txlx-gpio.h>
+#include <dt-bindings/gpio/gpio.h>
+
+#include "mesontxlx.dtsi"
+#include "partition_mbox_normal.dtsi"
+
+/ {
+ model = "Amlogic";
+ amlogic-dt-id = "atom";
+ compatible = "amlogic, txlx";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &uart_AO;
+ serial1 = &uart_A;
+ serial2 = &uart_B;
+ serial3 = &uart_C;
+ serial4 = &uart_AO_B;
+ };
+
+ ion_dev {
+ compatible = "amlogic, ion_dev";
+ memory-region = <&ion_reserved>;
+ };
+
+ memory@00000000 {
+ device_type = "memory";
+ linux,usable-memory = <0x0 0x100000 0x0 0x7ff00000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ /* global autoconfigured region for contiguous allocations */
+ ramoops@0x07400000 {
+ compatible = "ramoops";
+ reg = <0x0 0x07400000 0x0 0x00100000>;
+ record-size = <0x8000>;
+ console-size = <0x8000>;
+ ftrace-size = <0x0>;
+ pmsg-size = <0x8000>;
+ };
+ secmon_reserved:linux,secmon {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0x0 0x400000>;
+ alignment = <0x0 0x400000>;
+ alloc-ranges = <0x0 0x05000000 0x0 0x400000>;
+ };
+
+ //secos_reserved:linux,secos {
+ // status = "disabled";
+ // compatible = "amlogic, aml_secos_memory";
+ // reg = <0x0 0x05300000 0x0 0x2000000>;
+ // no-map;
+ //};
+
+
+
+ logo_reserved:linux,meson-fb {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0x0 0x800000>;
+ alignment = <0x0 0x400000>;
+ alloc-ranges = <0x0 0x7f800000 0x0 0x800000>;
+ };
+
+ //carveout_reserved:linux,carveout-reserve {
+ // compatible = "amlogic, idev-mem";
+ // size = <0x0 0x1000>;
+ //};
+
+ ion_reserved:linux,ion-dev {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0x0 0x7C00000>;
+ alignment = <0x0 0x400000>;
+ };
+
+ /*di CMA pool */
+ di_cma_reserved:linux,di_cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ /* buffer_size = 3621952(yuv422 8bit)
+ * | 4736064(yuv422 10bit)
+ * | 4179008(yuv422 10bit full pack mode)
+ * 10x3621952=34.6M(0x23) support 8bit
+ * 10x4736064=45.2M(0x2e) support 12bit
+ * 10x4179008=40M(0x28) support 10bit
+ */
+ size = <0x0 0x02800000>;
+ alignment = <0x0 0x400000>;
+ };
+
+ /* POST PROCESS MANAGER */
+ ppmgr_reserved:linux,ppmgr {
+ compatible = "amlogic, ppmgr_memory";
+ size = <0x0 0x0>;
+ };
+
+ codec_mm_cma:linux,codec_mm_cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ /* ion_codec_mm max can alloc size 80M*/
+ size = <0x0 0x13400000>;
+ alignment = <0x0 0x400000>;
+ linux,contiguous-region;
+ };
+
+ picdec_cma_reserved:linux,picdec {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0x0 0x0>;
+ alignment = <0x0 0x0>;
+ linux,contiguous-region;
+ };
+
+ /* codec shared reserved */
+ codec_mm_reserved:linux,codec_mm_reserved {
+ compatible = "amlogic, codec-mm-reserved";
+ size = <0x0 0x0>;
+ alignment = <0x0 0x100000>;
+ //no-map;
+ };
+
+ demod_cma_reserved:linux,demod_cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ /* 5M */
+ size = <0x0 0x0800000>;
+ alignment = <0x0 0x400000>;
+ };
+
+ /* vdin1 CMA pool */
+ vdin1_cma_reserved:linux,vdin1_cma {
+ compatible = "shared-dma-pool";
+ linux,phandle = <5>;
+ reusable;
+ /* 1920x1080x2x4 =16+4 M */
+ size = <0x0 0x01400000>;
+ alignment = <0x0 0x400000>;
+ };
+
+ /*vbi reserved mem*/
+ vbi_reserved:linux,vbi {
+ compatible = "amlogic, vbi-mem";
+ size = <0x0 0x100000>;
+ };
+ };
+
+ /* for external keypad */
+ adc_keypad {
+ compatible = "amlogic, adc_keypad";
+ status = "okay";
+ key_name = "vol+","vol-","woofer_pairing";
+ key_num = <3>;
+ io-channels = <&saradc SARADC_CH1>,
+ <&saradc SARADC_CH2>;
+ io-channel-names = "key-chan-1", "key-chan-2";
+ key_chan = <SARADC_CH1 SARADC_CH1 SARADC_CH2>;
+ key_code = <115 114 600>;
+ key_val = <0 180 0>; //val=voltage/1800mV*1023
+ key_tolerance = <40 40 40>;
+ };
+
+ gpio_keypad{
+ compatible = "amlogic, gpio_keypad";
+ status = "okay";
+ scan_period = <20>;
+ key_num = <3>;
+ key_name = "source", "bt_paring", "mute";
+ key_code = <466 218 248>;
+ key_pin = <&gpio GPIODV_0 GPIO_ACTIVE_LOW
+ &gpio GPIODV_1 GPIO_ACTIVE_LOW
+ &gpio_ao GPIOAO_3 GPIO_ACTIVE_LOW>;
+ interrupts = <0 70 1
+ 0 71 2>;
+ interrupt-names = "irq_keyup", "irq_keydown";
+ };
+
+ gpioleds {
+ compatible = "gpio-leds";
+ status = "okay";
+
+ bluetooth {
+ label = "bluetooth";
+ gpios = <&gpio GPIODV_6 GPIO_ACTIVE_HIGH>;
+ default-state = "off"; /* keep/on/off */
+ linux,default-trigger = "none";
+ };
+
+ rf_white {
+ label = "rf_white";
+ gpios = <&gpio GPIOW_11 (GPIO_OPEN_DRAIN |
+ GPIO_ACTIVE_HIGH)>;
+ default-state = "off"; /* keep/on/off */
+ linux,default-trigger = "none";
+ };
+
+ rf_amber {
+ label = "rf_amber";
+ gpios = <&gpio GPIOZ_7 GPIO_ACTIVE_HIGH>;
+ default-state = "off"; /* keep/on/off */
+ linux,default-trigger = "none";
+ };
+
+ };
+
+ pwmleds {
+ compatible = "pwm-leds";
+ status = "disabled";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwmleds_pins>;
+
+ sys {
+ active-low;
+ label = "sysled";
+ max-brightness = <255>;
+ pwms = <&pwm_AO_ab 0 50000 0>;
+ };
+ };
+
+ ethmac: ethernet@0xff3f0000 {
+ compatible = "amlogic, gxbb-eth-dwmac";
+ status = "okay";
+ reg = <0x0 0xff3f0000 0x0 0x10000
+ 0x0 0xff634540 0x0 0x8
+ 0x0 0xff634558 0x0 0xc
+ 0x0 0xffd01084 0x0 0x4>;
+ interrupts = <0 8 1
+ 0 9 1>;
+
+ phy-mode= "rmii";
+ mc_val_internal_phy = <0x1804>;
+ mc_val_external_phy = <0x1621>;
+ interrupt-names = "macirq",
+ "phyirq";
+ clocks = <&clkc CLKID_ETH_CORE>;
+ clock-names = "ethclk81";
+ internal_phy = <1>;
+ };
+
+ vout {
+ compatible = "amlogic, vout";
+ dev_name = "vout";
+ status = "okay";
+ fr_auto_policy = <0>;
+ };
+
+ meson-fb {
+ compatible = "amlogic, meson-txlx";
+ memory-region = <&logo_reserved>;
+ dev_name = "meson-fb";
+ status = "okay";
+ interrupts = <0 3 1
+ 0 89 1>;
+ interrupt-names = "viu-vsync", "rdma";
+ mem_size = <0x00800000 0x01800000 0x00100000>;
+ /* uboot logo,fb0/fb1 memory size,if afbcd fb0=0x01851000*/
+ display_mode_default = "1080p60hz";
+ /* 0:VPU free scale 1:OSD free scale 2:OSD super scale */
+ scale_mode = <1>;
+ /* 1920*1080*4*3 = 0x17BB000 */
+ display_size_default = <1920 1080 1920 3240 32>;
+ pxp_mode = <0>; /** 0:normal mode 1:pxp mode */
+ logo_addr = "0x7f800000";
+ };
+
+ ge2d {
+ compatible = "amlogic, ge2d-txlx";
+ dev_name = "ge2d";
+ status = "okay";
+ interrupts = <0 150 1>;
+ interrupt-names = "ge2d";
+ clocks = <&clkc CLKID_VAPB_MUX>,
+ <&clkc CLKID_G2D>,
+ <&clkc CLKID_GE2D_GATE>;
+ clock-names = "clk_vapb_0",
+ "clk_ge2d",
+ "clk_ge2d_gate";
+ reg = <0x0 0xff940000 0x0 0x10000>;
+ };
+
+ codec_io {
+ compatible = "amlogic, codec_io";
+ status = "okay";
+ #address-cells=<2>;
+ #size-cells=<2>;
+ ranges;
+ io_cbus_base{
+ reg = <0x0 0xffd00000 0x0 0x100000>;
+ };
+ io_dos_base{
+ reg = <0x0 0xff620000 0x0 0x10000>;
+ };
+ io_hiubus_base{
+ reg = <0x0 0xff63c000 0x0 0x2000>;
+ };
+ io_aobus_base{
+ reg = <0x0 0xff800000 0x0 0x10000>;
+ };
+ io_vcbus_base{
+ reg = <0x0 0xff900000 0x0 0x40000>;
+ };
+ io_dmc_base{
+ reg = <0x0 0xff638000 0x0 0x2000>;
+ };
+ };
+
+ codec_mm {
+ compatible = "amlogic, codec, mm";
+ memory-region = <&codec_mm_cma &codec_mm_reserved>;
+ dev_name = "codec_mm";
+ status = "okay";
+ };
+
+ mesonstream {
+ compatible = "amlogic, codec, streambuf";
+ dev_name = "mesonstream";
+ status = "okay";
+ clocks = <&clkc CLKID_DOS_PARSER
+ &clkc CLKID_DEMUX
+ &clkc CLKID_DOS
+ &clkc CLKID_VDEC_MUX
+ &clkc CLKID_HCODEC_MUX
+ &clkc CLKID_HEVC_MUX>;
+ clock-names = "parser_top",
+ "demux",
+ "vdec",
+ "clk_vdec_mux",
+ "clk_hcodec_mux",
+ "clk_hevc_mux";
+ };
+
+ vdec {
+ compatible = "amlogic, vdec";
+ dev_name = "vdec.0";
+ status = "okay";
+ interrupts = <0 3 1
+ 0 23 1
+ 0 32 1
+ 0 43 1
+ 0 44 1
+ 0 45 1>;
+ interrupt-names = "vsync",
+ "demux",
+ "parser",
+ "mailbox_0",
+ "mailbox_1",
+ "mailbox_2";
+ };
+
+ meson-amvideom {
+ compatible = "amlogic, amvideom";
+ dev_name = "amvideom";
+ status = "okay";
+ interrupts = <0 3 1>;
+ interrupt-names = "vsync";
+ };
+
+
+
+ amvideocap {
+ compatible = "amlogic, amvideocap";
+ dev_name = "amvideocap.0";
+ status = "disabled";
+ max_size = <8>;//8M
+ };
+
+ picdec {
+ compatible = "amlogic, picdec";
+ memory-region = <&picdec_cma_reserved>;
+ dev_name = "picdec";
+ status = "disabled";
+ };
+
+ ppmgr {
+ compatible = "amlogic, ppmgr";
+ memory-region = <&ppmgr_reserved>;
+ dev_name = "ppmgr";
+ status = "okay";
+ };
+
+ deinterlace {
+ compatible = "amlogic, deinterlace";
+ status = "okay";
+ /* 0:use reserved; 1:use cma; 2:use cma as reserved */
+ flag_cma = <1>;
+ //memory-region = <&di_reserved>;
+ memory-region = <&di_cma_reserved>;
+ interrupts = <0 46 1
+ 0 6 1>;
+ interrupt-names = "de_irq";
+ clocks = <&clkc CLKID_VPU_MUX>,
+ <&clkc CLKID_FCLK_DIV4>,
+ <&clkc CLKID_VPU_CLKB_TMP_COMP>,
+ <&clkc CLKID_VPU_CLKB_COMP>;
+ clock-names = "vpu_mux",
+ "fclk_div4",
+ "vpu_clkb_tmp_composite",
+ "vpu_clkb_composite";
+ clock-range = <250 500>;
+ /* buffer-size = <3621952>;(yuv422 8bit) */
+ buffer-size = <4179008>;/*yuv422 fullpack*/
+ /* reserve-iomap = "true"; */
+ /* if enable nr10bit, set nr10bit-support to 1 */
+ nr10bit-support = <1>;
+ };
+ ionvideo {
+ compatible = "amlogic, ionvideo";
+ dev_name = "ionvideo";
+ status = "okay";
+ };
+
+ amlvideo {
+ compatible = "amlogic, amlvideo";
+ dev_name = "amlvideo";
+ status = "okay";
+ };
+
+ amlvideo2_0 {
+ compatible = "amlogic, amlvideo2";
+ dev_name = "amlvideo2";
+ status = "okay";
+ amlvideo2_id = <0>;
+ cma_mode = <1>;
+ };
+
+ amlvideo2_1 {
+ compatible = "amlogic, amlvideo2";
+ dev_name = "amlvideo2";
+ status = "okay";
+ amlvideo2_id = <1>;
+ cma_mode = <1>;
+ };
+
+ hdmirx {
+ compatible = "amlogic, hdmirx_txlx";
+ #address-cells=<1>;
+ #size-cells=<1>;
+ dev_name = "hdmirx";
+ status = "okay";
+ pinctrl-names = "hdmirx_pins";
+ pinctrl-0 = <&hdmirx_a_mux &hdmirx_b_mux &hdmirx_d_mux>;
+ repeat = <0>;
+ interrupts = <0 56 1>;
+ clocks = <&clkc CLKID_HDMIRX_MODET_COMP>,
+ <&clkc CLKID_HDMIRX_CFG_COMP>,
+ <&clkc CLKID_HDMIRX_ACR_COMP>,
+ <&clkc CLKID_HDMIRX_AUDMEAS_COMP>,
+ <&xtal>,
+ <&clkc CLKID_FCLK_DIV5>,
+ <&clkc CLKID_FCLK_DIV7>,
+ <&clkc CLKID_HDCP22_SKP_COMP>,
+ <&clkc CLKID_HDCP22_ESM_COMP>;
+ // <&clkc CLK_AUD_PLL2FS>,
+ // <&clkc CLK_AUD_PLL4FS>,
+ // <&clkc CLK_AUD_OUT>;
+ clock-names = "hdmirx_modet_clk",
+ "hdmirx_cfg_clk",
+ "hdmirx_acr_ref_clk",
+ "hdmirx_audmeas_clk",
+ "xtal",
+ "fclk_div5",
+ "fclk_div7",
+ "hdcp_rx22_skp",
+ "hdcp_rx22_esm";
+ // "hdmirx_aud_pll2fs",
+ // "hdmirx_aud_pll4f",
+ // "clk_aud_out";
+ hdmirx_id = <0>;
+ en_4k_2_2k = <0>;
+ reg = <0x0 0xffd26000 0x0 0xa00000
+ 0x0 0xff63C000 0x0 0x2000
+ 0x0 0xffe0d000 0x0 0x2000
+ 0x0 0xff63e000 0x0 0x2000
+ 0x0 0x0 0x0 0x0
+ 0x0 0xff634400 0x0 0x2000
+ 0x0 0xff646000 0x0 0x2000>;
+ };
+
+ vdin0 {
+ compatible = "amlogic, vdin";
+ /*memory-region = <&vdin0_cma_reserved>;*/
+ dev_name = "vdin0";
+ status = "okay";
+ reserve-iomap = "true";
+ flag_cma = <1>;/*1:share with codec_mm;2:cma alone*/
+ /* MByte, if 10bit disable: 64M(YUV422),
+ * if 10bit enable: 64*1.5 = 96M(YUV422)
+ * if support 4K2K-YUV444-10bit-WR:3840*2160*4*4 ~= 128M
+ * if support 4K2K-YUV444-10bit-WR:3840*2160*4*6 ~= 190M
+ * if support 4K2K-YUV422-10bit-wr:3840*2160*3*4 ~= 96M
+ * if support 4K2K-YUV422-8BIT-WR:3840*2160*2*4 ~= 64M
+ * if support 1080p-YUV422-8BIT-WR:1920*1080*2*4 ~= 16M
+ */
+ cma_size = <190>;
+ interrupts = <0 83 1>;
+ rdma-irq = <2>;
+ clocks = <&clkc CLKID_FCLK_DIV5>,
+ <&clkc CLKID_VDIN_MEAS_COMP>;
+ clock-names = "fclk_div5", "cts_vdin_meas_clk";
+ vdin_id = <0>;
+ /* vdin write mem color depth support:
+ * bit0:support 8bit
+ * bit1:support 9bit
+ * bit2:support 10bit
+ * bit3:support 12bit
+ * bit4:support yuv422 10bit full pack mode (from txl new add)
+ */
+ tv_bit_mode = <21>;
+ };
+
+ vdin1 {
+ compatible = "amlogic, vdin";
+ memory-region = <&vdin1_cma_reserved>;
+ dev_name = "vdin1";
+ status = "okay";
+ reserve-iomap = "true";
+ flag_cma = <0>;/*1:share with codec_mm;0:cma alone*/
+ interrupts = <0 85 1>;
+ rdma-irq = <4>;
+ clocks = <&clkc CLKID_FCLK_DIV5>,
+ <&clkc CLKID_VDIN_MEAS_COMP>;
+ clock-names = "fclk_div5", "cts_vdin_meas_clk";
+ vdin_id = <1>;
+ /* vdin write mem color depth support:
+ * bit0:support 8bit
+ * bit1:support 9bit
+ * bit2:support 10bit
+ * bit3:support 12bit
+ */
+ tv_bit_mode = <1>;
+ };
+
+ tvafe {
+ compatible = "amlogic, tvafe-txlx";
+ /*memory-region = <&tvafe_cma_reserved>;*/
+ dev_name = "tvafe";
+ status = "okay";
+ flag_cma = <1>;/*1:share with codec_mm;0:cma alone*/
+ cma_size = <5>;/*MByte*/
+ reg = <0x0 0xff642000 0x0 0x2000>;/*tvafe reg base*/
+ reserve-iomap = "true";
+ tvafe_id = <0>;
+ //pinctrl-names = "default";
+ /*!!particular sequence, no more and no less!!!*/
+ tvafe_pin_mux = <
+ 3 /* TVAFE_CVBS_IN2, CVBS_IN0 = 0 */
+ 1 /* TVAFE_CVBS_IN0, CVBS_IN1 */
+ 2 /* TVAFE_CVBS_IN1, CVBS_IN2 */
+ 4 /* TVAFE_CVBS_IN3, CVBS_IN3 */
+ >;
+ clocks = <&clkc CLKID_DAC_CLK>;
+ clock-names = "vdac_clk_gate";
+ };
+
+ vbi {
+ compatible = "amlogic, vbi";
+ memory-region = <&vbi_reserved>;
+ dev_name = "vbi";
+ status = "okay";
+ interrupts = <0 83 1>;
+ reserve-iomap = "true";
+ };
+
+ tvafe_avin_detect {
+ compatible = "amlogic, tvafe_avin_detect";
+ dev_name = "tvafe_avin_detect";
+ status = "okay";
+ device_mask = <1>;/*bit0:ch1;bit1:ch2*/
+ interrupts = <0 12 1>,
+ <0 13 1>;
+ };
+
+ amlvecm {
+ compatible = "amlogic, vecm";
+ dev_name = "aml_vecm";
+ status = "okay";
+ gamma_en = <0>;/*1:enabel ;0:disable*/
+ wb_en = <0>;/*1:enabel ;0:disable*/
+ cm_en = <0>;/*1:enabel ;0:disable*/
+ wb_sel = <0>;/*1:mtx ;0:gainoff*/
+ };
+ amdolby_vision {
+ compatible = "amlogic, dolby_vision_txlx";
+ dev_name = "aml_amdolby_vision_driver";
+ status = "okay";
+ tv_mode = <0>;/*1:enabel ;0:disable*/
+ };
+ amvenc_avc {
+ compatible = "amlogic, amvenc_avc";
+ //memory-region = <&amvenc_avc_reserved>;
+ //memory-region = <&avc_cma_reserved>;
+ dev_name = "amvenc_avc";
+ status = "okay";
+ interrupts = <0 45 1>;
+ interrupt-names = "mailbox_2";
+ };
+
+ aml_atv_demod {
+ compatible = "amlogic, aml_atv_demod";
+ dev_name = "aml_atv_demod";
+ status = "disabled";
+ ////pinctrl-names="atvdemod_agc";
+ ////pinctrl-0=<&atvdemod_agc>;
+ reg = <0x0 0xff640000 0x0 0x2000
+ 0x0 0xff648000 0x0 0x2000>;
+ /* default:0x88188832;r840 on haier:0x48188832 */
+ reg_23cf = <0x88188832>;
+ };
+
+ bt-dev {
+ compatible = "amlogic, bt-dev";
+ dev_name = "bt-dev";
+ status = "okay";
+ gpio_reset = <&gpio_ao GPIOAO_13 GPIO_ACTIVE_HIGH>;
+ //gpio_en = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+ };
+
+ rtc {
+ compatible = "amlogic, aml_vrtc";
+ alarm_reg_addr = <0xff8000a8>;
+ timer_e_addr = <0xffd0f188>;
+ init_date = "2015/01/01";
+ status = "okay";
+ };
+
+ wifi {
+ compatible = "amlogic, aml_wifi";
+ dev_name = "aml_wifi";
+ status = "okay";
+ interrupt_pin = <&gpio_ao GPIOAO_4 GPIO_ACTIVE_HIGH>;
+ interrupts = <0 68 4>;
+ irq_trigger_type = "GPIO_IRQ_HIGH";
+ dhd_static_buf;
+ power_on_pin = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_32k_pins>;
+ pwm_config = <&wifi_pwm_conf>;
+ };
+
+ wifi_pwm_conf: wifi_pwm_conf {
+ pwm_channel1_conf {
+ pwms = <&pwm_cd MESON_PWM_1 30040 0>;
+ duty-cycle = <15020>;
+ times = <10>;
+ };
+ pwm_channel2_conf {
+ pwms = <&pwm_cd MESON_PWM_3 30030 0>;
+ duty-cycle = <15015>;
+ times = <12>;
+ };
+ };
+
+ sd_emmc_c: emmc@ffe07000 {
+ status = "okay";
+ compatible = "amlogic, meson-mmc-txlx";
+ reg = <0x0 0xffe07000 0x0 0x2000>;
+ interrupts = <0 218 1>;
+ pinctrl-names = "emmc_clk_cmd_pins", "emmc_all_pins";
+ pinctrl-0 = <&emmc_clk_cmd_pins>;
+ pinctrl-1 = <&emmc_conf_pull_up &emmc_conf_pull_done>;
+ clocks = <&clkc CLKID_SD_EMMC_C>,
+ <&clkc CLKID_SD_EMMC_C_P0_COMP>,
+ <&clkc CLKID_FCLK_DIV2>,
+ <&clkc CLKID_FCLK_DIV5>,
+ <&xtal>;
+ clock-names = "core", "clkin0", "clkin1", "clkin2", "xtal";
+
+ bus-width = <8>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+
+ max-frequency = <200000000>;
+ non-removable;
+ disable-wp;
+ emmc {
+ status = "disabled";
+ pinname = "emmc";
+ ocr_avail = <0x200080>; /**VDD voltage 3.3 ~ 3.4 */
+ caps = "MMC_CAP_8_BIT_DATA",
+ "MMC_CAP_MMC_HIGHSPEED",
+ "MMC_CAP_SD_HIGHSPEED",
+ "MMC_CAP_NONREMOVABLE",
+ "MMC_CAP_1_8V_DDR",
+ "MMC_CAP_HW_RESET",
+ "MMC_CAP_ERASE",
+ "MMC_CAP_CMD23";
+ caps2 = "MMC_CAP2_HS200", "MMC_CAP2_HS400";
+ f_min = <400000>;
+ f_max = <200000000>;
+ max_req_size = <0x20000>; /**128KB*/
+ gpio_dat3 = <&gpio BOOT_3 GPIO_ACTIVE_HIGH>;
+ hw_reset = <&gpio BOOT_9 GPIO_ACTIVE_HIGH>;
+ card_type = <1>;
+ /* 1:mmc card(include eMMC),
+ * 2:sd card(include tSD)
+ */
+ };
+ };
+
+ sd_emmc_b: sd@ffe05000 {
+ status = "okay";
+ compatible = "amlogic, meson-mmc-txlx";
+ reg = <0x0 0xffe05000 0x0 0x2000>;
+ interrupts = <0 217 4>;
+ pinctrl-names = "sd_clk_cmd_pins", "sd_all_pins";
+ pinctrl-0 = <&sd_clk_cmd_pins>;
+ pinctrl-1 = <&sd_all_pins>;
+ clocks = <&clkc CLKID_SD_EMMC_B>,
+ <&clkc CLKID_SD_EMMC_B_P0_COMP>,
+ <&clkc CLKID_FCLK_DIV2>,
+ <&clkc CLKID_FCLK_DIV5>,
+ <&xtal>;
+ clock-names = "core", "clkin0", "clkin1", "clkin2", "xtal";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <100000000>;
+ non-removable;
+ disable-wp;
+ sd {
+ status = "disabled";
+ pinname = "sd";
+ ocr_avail = <0x200080>; /**VDD voltage 3.3 ~ 3.4 */
+ caps = "MMC_CAP_4_BIT_DATA",
+ "MMC_CAP_MMC_HIGHSPEED",
+ "MMC_CAP_SD_HIGHSPEED",
+ "MMC_CAP_NONREMOVABLE",
+ "MMC_CAP_UHS_SDR12",
+ "MMC_CAP_UHS_SDR25",
+ "MMC_CAP_UHS_SDR50",
+ "MMC_CAP_UHS_SDR104",
+ "MMC_PM_KEEP_POWER",
+ "MMC_CAP_SDIO_IRQ";
+ f_min = <400000>;
+ f_max = <200000000>;
+ max_req_size = <0x20000>; /**128KB*/
+ card_type = <3>;
+ /* 3:sdio device(ie:sdio-wifi),
+ * 4:SD combo (IO+mem) card
+ * 5:NON sdio device(means sd/mmc card)
+ */
+ };
+ };
+
+ unifykey {
+ compatible = "amlogic, unifykey";
+ status = "okay";
+
+ unifykey-num = <18>;
+ unifykey-index-0 = <&keysn_0>;
+ unifykey-index-1 = <&keysn_1>;
+ unifykey-index-2 = <&keysn_2>;
+ unifykey-index-3 = <&keysn_3>;
+ unifykey-index-4 = <&keysn_4>;
+ unifykey-index-5 = <&keysn_5>;
+ unifykey-index-6 = <&keysn_6>;
+ unifykey-index-7 = <&keysn_7>;
+ unifykey-index-8 = <&keysn_8>;
+ unifykey-index-9 = <&keysn_9>;
+ unifykey-index-10= <&keysn_10>;
+ unifykey-index-11 = <&keysn_11>;
+ unifykey-index-12 = <&keysn_12>;
+ unifykey-index-13 = <&keysn_13>;
+ unifykey-index-14 = <&keysn_14>;
+ unifykey-index-15 = <&keysn_15>;
+ unifykey-index-16 = <&keysn_16>;
+ unifykey-index-17 = <&keysn_17>;
+
+ keysn_0: key_0{
+ key-name = "usid";
+ key-device = "normal";
+ key-permit = "read","write","del";
+ };
+ keysn_1:key_1{
+ key-name = "mac";
+ key-device = "normal";
+ key-permit = "read","write","del";
+ };
+ keysn_2:key_2{
+ key-name = "hdcp";
+ key-device = "secure";
+ key-type = "sha1";
+ key-permit = "read","write","del";
+ };
+ keysn_3:key_3{
+ key-name = "secure_boot_set";
+ key-device = "efuse";
+ key-permit = "write";
+ };
+ keysn_4:key_4{
+ key-name = "mac_bt";
+ key-device = "normal";
+ key-permit = "read","write","del";
+ key-type = "mac";
+ };
+ keysn_5:key_5{
+ key-name = "mac_wifi";
+ key-device = "normal";
+ key-permit = "read","write","del";
+ key-type = "mac";
+ };
+ keysn_6:key_6{
+ key-name = "hdcp2_tx";
+ key-device = "normal";
+ key-permit = "read","write","del";
+ };
+ keysn_7:key_7{
+ key-name = "hdcp2_rx";
+ key-device = "normal";
+ key-permit = "read","write","del";
+ };
+ keysn_8:key_8{
+ key-name = "widevinekeybox";
+ key-device = "secure";
+ key-type = "sha1";
+ key-permit = "read","write","del";
+ };
+ keysn_9:key_9{
+ key-name = "deviceid";
+ key-device = "normal";
+ key-permit = "read","write","del";
+ };
+ keysn_10:key_10{
+ key-name = "hdcp22_fw_private";
+ key-device = "secure";
+ key-permit = "read","write","del";
+ };
+ keysn_11:key_11{
+ key-name = "hdcp22_rx_private";
+ key-device = "secure";
+ key-permit = "read","write","del";
+ };
+ keysn_12:key_12{
+ key-name = "hdcp22_rx_fw";
+ key-device = "normal";
+ key-permit = "read","write","del";
+ };
+ keysn_13:key_13{
+ key-name = "hdcp14_rx";
+ key-device = "normal";
+ key-type = "sha1";
+ key-permit = "read","write","del";
+ };
+ keysn_14:key_14{
+ key-name = "prpubkeybox";// PlayReady
+ key-device = "secure";
+ key-permit = "read","write","del";
+ };
+ keysn_15:key_15{
+ key-name = "prprivkeybox";// PlayReady
+ key-device = "secure";
+ key-permit = "read","write","del";
+ };
+ keysn_16: key_16{
+ key-name = "region_code";
+ key-device = "normal";
+ key-permit = "read","write","del";
+ };
+ keysn_17:key_17{
+ key-name = "attestationkeybox";// attestation key
+ key-device = "secure";
+ key-permit = "read","write","del";
+ };
+
+ }; /* End unifykey */
+
+ vdac {
+ compatible = "amlogic, vdac";
+ dev_name = "vdac";
+ status = "okay";
+ };
+
+ cvbsout {
+ compatible = "amlogic, cvbsout-txlx";
+ dev_name = "cvbsout";
+ status = "okay";
+ clocks = <&clkc CLKID_VCLK2_ENCI
+ &clkc CLKID_VCLK2_VENCI0
+ &clkc CLKID_VCLK2_VENCI1
+ &clkc CLKID_DAC_CLK>;
+ clock-names = "venci_top_gate",
+ "venci_0_gate",
+ "venci_1_gate",
+ "vdac_clk_gate";
+
+ /* performance: reg_address, reg_value */
+ performance = <0x1b56 0x343
+ 0x1b05 0xf4
+ 0x1c59 0xfc48
+ 0x1b12 0x8c00
+ 0xffff 0x0>; /* ending flag */
+ };
+
+ amhdmitx: amhdmitx {
+ compatible = "amlogic, amhdmitx";
+ dev_name = "amhdmitx";
+ status = "okay";
+ pinctrl-names="default", "hdmitx_i2c";
+ pinctrl-0=<&hdmitx_hpd &hdmitx_ddc>;
+ pinctrl-1=<&hdmitx_hpd_gpio &i2c2_h_pins>;
+ clocks = <&clkc CLKID_HDCP22_SKP_COMP>,
+ <&clkc CLKID_HDCP22_ESM_COMP>;
+ clock-names = "hdcp22_tx_skp",
+ "hdcp22_tx_esm";
+ /* HPD, 57 + 32 = 89; CEC, 151 + 32 = 183*/
+ interrupts = <0 57 1>;
+ interrupt-names = "hdmitx_hpd";
+ /* 0:M8B 1:GXBB 2:GXTVBB 3:GXL 4:GXM
+ * 5:TXL 6:TXLX 7:AXG 8:GXLX 9:TXHD
+ */
+ ic_type = <6>;
+ //gpio_i2c_en = <0>;
+ //repeater_tx = <0x1>;
+ //#address-cells = <2>;
+ //#size-cells = <2>;
+ //ranges;
+ };
+
+ i2c_gpio: i2c_gpio {
+ compatible = "i2c-gpio";
+ dev_name = "i2c-gpio";
+ status = "disabled";
+ i2c-gpio,delay-us = <10>; /* 50 kHz */
+ gpios = <&gpio GPIOH_2 0
+ &gpio GPIOH_3 0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ i2c-gpio,timeout-ms = <10>;
+ i2c_gpio_edid: i2c_gpio_edid {
+ compatible = "i2c-gpio";
+ reg = <0x50 0x0 0x0 0x0>;
+ };
+ };
+
+ aocec: aocec {
+ compatible = "amlogic, aocec-txlx";
+ device_name = "aocec";
+ status = "okay";
+ vendor_name = "Amlogic"; /* Max Chars: 8 */
+ /* Refer to the following URL at:
+ * http://standards.ieee.org/develop/regauth/oui/oui.txt
+ */
+ vendor_id = <0x000000>;
+ product_desc = "TXLX"; /* Max Chars: 16 */
+ cec_osd_string = "AML_TV"; /* Max Chars: 14 */
+ port_num = <4>;
+ ee_cec;
+ arc_port_mask = <0x2>;
+ interrupts = <0 205 1
+ 0 199 1>;
+ interrupt-names = "hdmi_aocecb","hdmi_aocec";
+ pinctrl-names = "default","hdmitx_aocecb","cec_pin_sleep";
+ pinctrl-0=<&hdmitx_aocec>;
+ pinctrl-1=<&hdmitx_aocecb>;
+ pinctrl-2=<&hdmitx_aocecb>;
+ reg = <0x0 0xFF80023c 0x0 0x4
+ 0x0 0xFF800000 0x0 0x400>;
+ };
+
+
+ canvas {
+ compatible = "amlogic, meson, canvas";
+ dev_name = "amlogic-canvas";
+ status = "okay";
+ reg = <0x0 0xff638000 0x0 0x2000>;
+ };
+
+ rdma {
+ compatible = "amlogic, meson, rdma";
+ dev_name = "amlogic-rdma";
+ status = "okay";
+ interrupts = <0 89 1>;
+ interrupt-names = "rdma";
+ };
+
+ dwc3: dwc3@ff500000 {
+ compatible = "synopsys, dwc3";
+ status = "okay";
+ reg = <0x0 0xff500000 0x0 0x100000>;
+ interrupts = <0 30 4>;
+ usb-phy = <&usb2_phy>, <&usb3_phy>;
+ cpu-type = "gxl";
+ clock-src = "usb3.0";
+ };
+
+ usb2_phy: usb2phy@ffe09000 {
+ compatible = "amlogic, amlogic-new-usb2";
+ status = "okay";
+ portnum = <4>;
+ reg = <0x0 0xffe09000 0x0 0x80
+ 0x0 0xffd01008 0x0 0x4>;
+ };
+
+ usb3_phy: usb3phy@ffe09080 {
+ compatible = "amlogic, amlogic-new-usb3";
+ status = "okay";
+ portnum = <0>;
+ reg = <0x0 0xffe09080 0x0 0x20>;
+ };
+
+ dwc2_a {
+ compatible = "amlogic, dwc2";
+ device_name = "dwc2_a";
+ reg = <0x0 0xff400000 0x0 0x40000>;
+ status = "okay";
+ interrupts = <0 31 4>;
+ pl-periph-id = <0>; /** lm name */
+ clock-src = "usb0"; /** clock src */
+ port-id = <0>; /** ref to mach/usb.h */
+ port-type = <2>; /** 0: otg, 1: host, 2: slave */
+ port-speed = <0>; /** 0: default, high, 1: full */
+ port-config = <0>; /** 0: default */
+ /*0:default,1:single,2:incr,3:incr4,4:incr8,5:incr16,6:disable*/
+ port-dma = <0>;
+ port-id-mode = <0>; /** 0: hardware, 1: sw_host, 2: sw_slave*/
+ usb-fifo = <728>;
+ cpu-type = "gxl";
+ /** 0: normal, 1: otg+dwc3 host only, 2: otg+dwc3 device only*/
+ controller-type = <1>;
+ phy-reg = <0xffe09000>;
+ phy-reg-size = <0xa0>;
+ clocks = <&clkc CLKID_USB_GENERAL
+ &clkc CLKID_USB1_TO_DDR>;
+ clock-names = "usb_general",
+ "usb1";
+ };
+
+ /* Sound iomap */
+ aml_snd_iomap {
+ compatible = "amlogic, meson-snd-iomap";
+ status = "okay";
+ #address-cells=<2>;
+ #size-cells=<2>;
+ ranges;
+ io_audin_base {
+ reg = <0x0 0xffd03000 0x0 0x100000>;
+ };
+ io_aiu_base {
+ reg = <0x0 0xFFCFFC00 0x0 0x100000>;
+ };
+ io_eqdrc_base {
+ reg = <0x0 0xFFCFF000 0x0 0x100000>;
+ };
+ io_hiu_reset_base {
+ reg = <0x0 0xFFCFCC00 0x0 0x100000>;
+ };
+ io_isa_base {
+ reg = <0x0 0xFFD05800 0x0 0x100000>;
+ };
+ };
+
+ /* AUDIO DEVICES */
+ i2s_dai: I2S {
+ #sound-dai-cells = <0>;
+ /* config mpll whether same with audin */
+ clocks = <&clkc CLKID_MPLL3>,
+ <&clkc CLKID_AMCLK_COMP>,
+ <&clkc CLKID_AIU_GLUE>,
+ <&clkc CLKID_I2S_OUT>,
+ <&clkc CLKID_AMCLK_MEASURE>,
+ <&clkc CLKID_AIFIFO2>,
+ <&clkc CLKID_MIXER>,
+ <&clkc CLKID_MIXER_IFACE>,
+ <&clkc CLKID_ADC>,
+ <&clkc CLKID_AIU_TOP>,
+ <&clkc CLKID_AOCLK_GATE>,
+ <&clkc CLKID_I2S_SPDIF>,
+ <&clkc CLKID_DAC_CLK>;
+ clock-names = "mpll",
+ "mclk",
+ "top_glue",
+ "i2s_out",
+ "amclk_measure",
+ "aififo2",
+ "aud_mixer",
+ "mixer_reg",
+ "adc",
+ "top_level",
+ "aoclk",
+ "aud_in",
+ "vdac_clk";
+ compatible = "amlogic, aml-i2s-dai";
+ };
+
+ i2s2_dai: I2S2 {
+ #sound-dai-cells = <0>;
+ /* config mpll whether same with aiu */
+ clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_AUDIN_MCLK_COMP>,
+ <&clkc CLKID_AUDIN_SCLK_COMP>,
+ <&clkc CLKID_AUDIN_LRCLK_COMP>;
+ clock-names = "audin_mpll",
+ "audin_mclk",
+ "audin_sclk",
+ "audin_lrclk";
+ compatible = "amlogic, aml-i2s2-dai";
+ };
+
+ spdif_dai: SPDIF {
+ #sound-dai-cells = <0>;
+ compatible = "amlogic, aml-spdif-dai";
+ clocks = <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_IEC958_INT_COMP>,
+ <&clkc CLKID_AMCLK_COMP>,
+ <&clkc CLKID_IEC958_MUX>,
+ <&clkc CLKID_CLK81>,
+ <&clkc CLKID_IEC958>,
+ <&clkc CLKID_IEC958_GATE>;
+ clock-names =
+ "mpll1",
+ "i958",
+ "mclk",
+ "spdif",
+ "clk_81",
+ "iec958",
+ "iec958_amclk";
+ };
+
+ pcm_dai: PCM {
+ #sound-dai-cells = <0>;
+ compatible = "amlogic, aml-pcm-dai";
+ pinctrl-names = "audio_pcm";
+ /* disable pcm pin mux temporary, enable it if necessary */
+ /*pinctrl-0 = <&aml_audio_pcm>;*/
+ clocks = <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_PCM_MCLK_COMP>,
+ <&clkc CLKID_PCM_SCLK_COMP>;
+ clock-names = "mpll0", "pcm_mclk", "pcm_sclk";
+ pcm_mode = <1>; /* 0=slave mode, 1=master mode */
+ };
+
+ i2s_plat: i2s_platform {
+ compatible = "amlogic, aml-i2s";
+ interrupts = <0 29 1>;
+ };
+
+ pcm_plat: pcm_platform {
+ compatible = "amlogic, aml-pcm";
+ };
+
+ spdif_codec: spdif_codec{
+ #sound-dai-cells = <0>;
+ compatible = "amlogic, aml-spdif-codec";
+ pinctrl-names = "audio_spdif_in";
+ pinctrl-0 = <&audio_spdif_in_pins>;
+ };
+
+ pcm_codec: pcm_codec{
+ #sound-dai-cells = <0>;
+ compatible = "amlogic, pcm2BT-codec";
+ };
+ /* end of AUDIO DEVICES */
+
+ /* AUDIO board specific */
+ dummy_codec:dummy{
+ #sound-dai-cells = <0>;
+ compatible = "amlogic, aml_dummy_codec";
+ status = "okay";
+ };
+
+ amlogic_codec:txlx_acodec{
+ #sound-dai-cells = <0>;
+ compatible = "amlogic, txlx_acodec";
+ reg = <0x0 0xFF632000 0x0 0x1c>;
+ status = "okay";
+ };
+
+ aml_snd_tv {
+ compatible = "amlogic, txlx-snd-tv";
+ status = "okay";
+ aml-sound-card,format = "i2s";
+ aml_sound_card,name = "AML-TVAUDIO";
+ pinctrl-names = "audio_i2s";
+ pinctrl-0 = <&aml_audio_i2s>;
+ /*avout mute gpio*/
+ mute_gpio-gpios = <&gpio GPIODV_5 GPIO_ACTIVE_HIGH>;
+ /*switch ARC_IN & SPDIF_IN*/
+ source_switch-gpios = <&gpio GPIOZ_4 GPIO_ACTIVE_HIGH>;
+ source_switch_inv = <1>;
+ sleep_time = <100>;
+ /*analog amp mute*/
+ amp_mute_gpio-gpios = <&gpio GPIOZ_2 GPIO_ACTIVE_HIGH>;
+ /*aux_dev = <&cs42528>;*/
+ cpu_list = <&cpudai0 &cpudai1 &cpudai2>;
+ codec_list = <&codec0 &codec1 &codec2>;
+ plat_list = <&i2s_plat &i2s_plat &i2s_plat>;
+ cpudai0: cpudai0 {
+ sound-dai = <&i2s_dai>;
+ };
+ cpudai1: cpudai1 {
+ sound-dai = <&spdif_dai>;
+ };
+ cpudai2: cpudai2 {
+ sound-dai = <&i2s2_dai>;
+ };
+ codec0: codec0 {
+ sound-dai = <&cs42528>;
+ };
+ codec1: codec1 {
+ sound-dai = <&spdif_codec>;
+ };
+ codec2: codec2 {
+ sound-dai = <&dummy_codec>;
+ };
+ Channel_Mask {
+ /*i2s has 4 pins, 8channel, mux output*/
+ Speaker_Channel_Mask = "i2s_2/3";
+ DAC0_Channel_Mask = "i2s_0/1";
+ DAC1_Channel_Mask = "i2s_0/1";
+ EQ_DRC_Channel_Mask = "i2s_0/1";
+ Spdif_samesource_Channel_Mask = "i2s_0/1";
+ };
+ };
+
+ amaudio2 {
+ compatible = "amlogic, aml_amaudio2";
+ status = "okay";
+ interrupts = <0 48 1>;
+ };
+ /* end of AUDIO board specific */
+
+ dvb {
+ compatible = "amlogic, dvb";
+ dev_name = "dvb";
+ status = "disabled";
+ /*"parallel","serial","disable"*/
+ ts2 = "parallel";
+ ts2_control = <0>;
+ ts2_invert = <0>;
+ //resets = <&clock GCLK_IDX_DEMUX
+ // &clock GCLK_IDX_ASYNC_FIFO
+ // &clock GCLK_IDX_AHB_ARB0
+ // &clock GCLK_IDX_U_PARSER_TOP>;
+ //reset-names = "demux", "asyncfifo", "ahbarb0", "uparsertop";
+ };
+
+ aml_sensor0: aml-sensor@0 {
+ compatible = "amlogic, aml-thermal";
+ device_name = "thermal";
+ status = "disabled";
+ #thermal-sensor-cells = <1>;
+ cooling_devices {
+ cpufreq_cool_cluster0 {
+ min_state = <1000000>;
+ dyn_coeff = <140>;
+ cluster_id = <0>;
+ node_name = "cpus";
+ device_type = "cpufreq";
+ };
+ cpucore_cool_cluster0 {
+ min_state = <1>;
+ dyn_coeff = <0>;
+ cluster_id = <0>;
+ node_name = "cpu_core_cluster0";
+ device_type = "cpucore";
+ };
+ gpufreq_cool {
+ min_state = <400>;
+ dyn_coeff = <437>;
+ cluster_id = <0>;
+ node_name = "mali";
+ device_type = "gpufreq";
+ };
+ gpucore_cool {
+ min_state = <1>;
+ dyn_coeff = <0>;
+ cluster_id = <0>;
+ node_name = "thermal_gpu_cores";
+ device_type = "gpucore";
+ };
+ };
+ cpu_cluster0:cpu_core_cluster0 {
+ #cooling-cells = <2>; /* min followed by max */
+ };
+ gpucore:thermal_gpu_cores {
+ #cooling-cells = <2>; /* min followed by max */
+ };
+ };
+
+ dvb {
+ compatible = "amlogic, dvb";
+ dev_name = "dvb";
+ status = "disabled";
+ /*"parallel","serial","disable"*/
+ ts2 = "parallel";
+ ts2_control = <0>;
+ ts2_invert = <0>;
+ //resets = <&clock GCLK_IDX_DEMUX
+ // &clock GCLK_IDX_ASYNC_FIFO
+ // &clock GCLK_IDX_AHB_ARB0
+ // &clock GCLK_IDX_U_PARSER_TOP>;
+ //reset-names = "demux", "asyncfifo", "ahbarb0", "uparsertop";
+ };
+
+ dvbfe {
+ compatible = "amlogic, dvbfe";
+ dev_name = "dvbfe";
+ status = "disabled";
+ dtv_demod0 = "AMLDEMOD";
+ fe0_dtv_demod = <0>;
+ fe0_ts = <2>;
+ fe0_dev = <0>;
+ dtv_demod0_mem = <0>;
+ dtv_demod0_spectrum = <1>;
+ dtv_demod0_cma_flag = <1>;
+ dtv_demod0_cma_mem_size = <8>;
+ memory-region = <&demod_cma_reserved>;//<&demod_reserved>;
+ tuner0 = "si2151_tuner";
+ tuner0_i2c_adap_id = <2>;
+ tuner0_i2c_addr = <0x60>;
+ //tuner0_reset_value = <0>;
+ //tuner0_reset_gpio = "GPIOY_10" ; /*GPIOX_8 76*/
+ fe0_tuner = <0>;
+ atv_demod0 = "aml_atv_demod";
+ fe0_atv_demod = <0>;
+ };
+
+ thermal-zones {
+ soc_thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <100>;
+ sustainable-power = <2150>;
+
+ thermal-sensors = <&aml_sensor0 3>;
+
+ trips {
+ switch_on: trip-point@0 {
+ temperature = <70000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ control: trip-point@1 {
+ temperature = <80000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ hot: trip-point@2 {
+ temperature = <85000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+ critical: trip-point@3 {
+ temperature = <260000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ cpufreq_cooling_map {
+ trip = <&control>;
+ cooling-device = <&cpus 0 4>;
+ contribution = <1024>;
+ };
+ cpucore_cooling_map {
+ trip = <&control>;
+ cooling-device = <&cpu_cluster0 0 3>;
+ contribution = <1024>;
+ };
+ gpufreq_cooling_map {
+ trip = <&control>;
+ //cooling-device = <&gpu 0 4>;
+ contribution = <1024>;
+ };
+ gpucore_cooling_map {
+ trip = <&control>;
+ cooling-device = <&gpucore 0 2>;
+ contribution = <1024>;
+ };
+ };
+ };
+ };
+
+}; /* end of / */
+
+&i2c0 {
+ status = "okay";
+ pinctrl-names="default";
+ pinctrl-0=<&i2c0_z_pins>;
+
+ tas5707: tas5707@36 {
+ compatible = "ti,tas5707";
+ #sound-dai-cells = <0>;
+ codec_name = "tas5707";
+ reg = <0x1B>;
+ reset_pin = <&gpio GPIOZ_13 GPIO_ACTIVE_LOW>;
+ eq_enable = <0>;
+ drc_enable = <0>;
+ status = "disable";
+ };
+ cs42528: cs42528@4E {
+ compatible = "cirrus,cs42528";
+ #sound-dai-cells = <0>;
+ codec_name = "cs42528";
+ reg = <0x4E>;
+ reset_pin = <&gpio GPIOZ_17 GPIO_ACTIVE_LOW>;
+ status = "okay";
+ };
+};
+
+&pinctrl_periphs {
+ /*i2s*/
+ aml_audio_i2s: aml_audio_i2s {
+ mux {
+ groups = "i2s_mclk_z",
+ "i2s_sclk_z",
+ "i2s_lrclk_z",
+ "i2s_dout01_z",
+ "i2s_dout23_z15",
+ "i2s_dout45_z",
+ "i2s_din67_z19",
+ "i2s_lrclk_h",
+ "i2s_sclk_h",
+ "i2s_din01_h6"
+ //, "i2s_dout67_z19"
+ //, "i2s_din23_h5"
+ //, "i2s_din23_h5"
+ //, "i2s_din67_h0"
+ ;
+ function = "i2s";
+ };
+ };
+ /*spdif*/
+ audio_spdif_in_pins: audio_spdif_in_pins {
+ mux {
+ groups = "spdif_in_z18";
+ function = "spdif_in";
+ };
+ };
+ /*pcm*/
+ aml_audio_pcm: aml_audio_pcm {
+ mux {
+ groups =
+ "pcm_clk_a_dv",
+ "pcm_fs_a_dv",
+ "pcm_in_a_dv",
+ "pcm_out_a_dv";
+ function = "pcm_a";
+ };
+ };
+ spi_a_pins: spi_a {
+ mux {
+ groups = "spi_mosi_a";
+ function = "spi_a";
+ };
+ };
+};
+
+&uart_A {
+ status = "okay";
+};
+
+&audio_data{
+ status = "okay";
+};
+
+&pwm_AO_ab {
+ status = "okay";
+};
+
+&pwm_cd {
+ status = "okay";
+};
+
+&spicc0 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi_a_pins>;
+ //cs-gpios = <&gpio GPIOZ_3 0>;
+ spidev {
+ compatible = "rohm,dh2228fv";
+ status = "okay";
+ reg = <0>;
+ spi-max-frequency = <3340000>;
+ };
+};
+
--- /dev/null
+/*
+ * arch/arm64/boot/dts/amlogic/gxl_p212_1g.dts
+ *
+ * Copyright (C) 2017 Amlogic, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+/dts-v1/;
+
+#include "mesongxl.dtsi"
+#include "partition_mbox_normal_sei32bit.dtsi"
+/ {
+ model = "Amlogic";
+ amlogic-dt-id = "gxl_sei210_1g";
+ compatible = "amlogic, Gxl";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &uart_AO;
+ serial1 = &uart_A;
+ serial2 = &uart_B;
+ serial3 = &uart_C;
+ serial4 = &uart_AO_B;
+ };
+
+ ion_dev {
+ compatible = "amlogic, ion_dev";
+ memory-region = <&ion_reserved>;
+ };
+
+ memory@00000000 {
+ device_type = "memory";
+ linux,usable-memory = <0x0 0x0100000 0x0 0x3ff00000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ /* global autoconfigured region for contiguous allocations */
+ secmon_reserved:linux,secmon {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0x0 0x400000>;
+ alignment = <0x0 0x400000>;
+ alloc-ranges = <0x0 0x05000000 0x0 0x400000>;
+ };
+ secos_reserved:linux,secos {
+ status = "disable";
+ compatible = "amlogic, aml_secos_memory";
+ reg = <0x0 0x05300000 0x0 0x2000000>;
+ no-map;
+ };
+ logo_reserved:linux,meson-fb {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0x0 0x800000>;
+ alignment = <0x0 0x400000>;
+ alloc-ranges = <0x0 0x3f800000 0x0 0x800000>;
+ };
+ //don't put other dts in front of logo_reserved
+
+ //di_reserved:linux,di {
+ // compatible = "amlogic, di-mem";
+ /** 10x3133440=30M(0x1e) support 8bit **/
+ // size = <0x0 0x1e00000>;
+ //no-map;
+ //};
+ di_cma_reserved:linux,di_cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ /** 10x3133440=30M(0x1e) support 8bit **/
+ size = <0x0 0x2000000>;
+ alignment = <0x0 0x400000>;
+ };
+ ion_reserved:linux,ion-dev {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0x0 0x7C00000>;
+ alignment = <0x0 0x400000>;
+ };
+
+ /* vdin0 CMA pool */
+ //vdin0_cma_reserved:linux,vdin0_cma {
+ // compatible = "shared-dma-pool";
+ // linux,phandle = <4>;
+ // reusable;
+ /* 1920x1080x2x4 =16+4 M */
+ // size = <0x0 0x01400000>;
+ // alignment = <0x0 0x400000>;
+ //};
+ /* vdin1 CMA pool */
+ vdin1_cma_reserved:linux,vdin1_cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ /* 1920x1080x2x4 =16 M */
+ size = <0x0 0x01000000>;
+ alignment = <0x0 0x400000>;
+ };
+ /* POST PROCESS MANAGER */
+ ppmgr_reserved:linux,ppmgr {
+ compatible = "shared-dma-pool";
+ size = <0x0 0x0>;
+ };
+
+ codec_mm_cma:linux,codec_mm_cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ /* ion_codec_mm max can alloc size 80M*/
+ size = <0x0 0x13400000>;
+ alignment = <0x0 0x400000>;
+ linux,contiguous-region;
+ };
+ picdec_cma_reserved:linux,picdec {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0x0 0x0>;
+ alignment = <0x0 0x0>;
+ linux,contiguous-region;
+ };
+ /* codec shared reserved */
+ codec_mm_reserved:linux,codec_mm_reserved {
+ compatible = "amlogic, codec-mm-reserved";
+ size = <0x0 0x0>;
+ alignment = <0x0 0x100000>;
+ //no-map;
+ };
+ };
+
+ bt-dev{
+ compatible = "amlogic, bt-dev";
+ dev_name = "bt-dev";
+ status = "okay";
+ gpio_reset = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ };
+
+ wifi{
+ compatible = "amlogic, aml_wifi";
+ dev_name = "aml_wifi";
+ status = "okay";
+ interrupt_pin = <&gpio GPIOX_7 GPIO_ACTIVE_HIGH>;
+ irq_trigger_type = "GPIO_IRQ_LOW";
+ dhd_static_buf; //dhd_static_buf support
+ power_on_pin = <&gpio GPIOX_6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_32k_pins>;
+ pwm_config = <&wifi_pwm_conf>;
+ };
+
+ wifi_pwm_conf:wifi_pwm_conf{
+ pwm_channel1_conf {
+ pwms = <&pwm_ef MESON_PWM_0 30040 0>;
+ duty-cycle = <15020>;
+ times = <8>;
+ };
+ pwm_channel2_conf {
+ pwms = <&pwm_ef MESON_PWM_2 30030 0>;
+ duty-cycle = <15015>;
+ times = <12>;
+ };
+ };
+
+ sd_emmc_c: emmc@d0074000 {
+ status = "okay";
+ compatible = "amlogic, meson-mmc-gxl";
+ reg = <0x0 0xd0074000 0x0 0x2000>;
+ interrupts = <0 218 1>;
+ pinctrl-names = "emmc_clk_cmd_pins", "emmc_all_pins";
+ pinctrl-0 = <&emmc_clk_cmd_pins>;
+ pinctrl-1 = <&emmc_conf_pull_up &emmc_conf_pull_done>;
+ clocks = <&clkc CLKID_SD_EMMC_C>,
+ <&clkc CLKID_SD_EMMC_C_P0_COMP>,
+ <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "core", "clkin0", "clkin1";
+
+ bus-width = <8>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+
+ max-frequency = <200000000>;
+ non-removable;
+ disable-wp;
+ emmc {
+ pinname = "emmc";
+ ocr_avail = <0x200080>; /**VDD voltage 3.3 ~ 3.4 */
+ caps = "MMC_CAP_8_BIT_DATA",
+ "MMC_CAP_MMC_HIGHSPEED",
+ "MMC_CAP_SD_HIGHSPEED",
+ "MMC_CAP_NONREMOVABLE",
+ "MMC_CAP_1_8V_DDR",
+ "MMC_CAP_HW_RESET",
+ "MMC_CAP_ERASE",
+ "MMC_CAP_CMD23";
+ caps2 = "MMC_CAP2_HS200", "MMC_CAP2_HS400";
+ f_min = <400000>;
+ f_max = <100000000>;
+ max_req_size = <0x20000>; /**128KB*/
+ gpio_dat3 = <&gpio BOOT_3 GPIO_ACTIVE_HIGH>;
+ hw_reset = <&gpio BOOT_9 GPIO_ACTIVE_HIGH>;
+ card_type = <1>;
+ /* 1:mmc card(include eMMC),
+ * 2:sd card(include tSD)
+ */
+ };
+ };
+
+ sd_emmc_b:sd@d0072000 {
+ status = "okay";
+ compatible = "amlogic, meson-mmc-gxl";
+ reg = <0x0 0xd0072000 0x0 0x2000>;
+ interrupts = <0 217 1>;
+ pinctrl-names = "sd_all_pins",
+ "sd_clk_cmd_pins",
+ "sd_1bit_pins",
+ "sd_clk_cmd_uart_pins",
+ "sd_1bit_uart_pins",
+ "sd_to_ao_uart_pins",
+ "ao_to_sd_uart_pins",
+ "ao_to_sd_jtag_pins",
+ "sd_to_ao_jtag_pins";
+ pinctrl-0 = <&sd_all_pins>;
+ pinctrl-1 = <&sd_clk_cmd_pins>;
+ pinctrl-2 = <&sd_1bit_pins>;
+ pinctrl-3 = <&sd_to_ao_uart_clr_pins
+ &sd_clk_cmd_pins &ao_to_sd_uart_pins>;
+ pinctrl-4 = <&sd_to_ao_uart_clr_pins
+ &sd_1bit_pins &ao_to_sd_uart_pins>;
+ pinctrl-5 = <&sd_all_pins &sd_to_ao_uart_pins>;
+ pinctrl-6 = <&sd_to_ao_uart_clr_pins &ao_to_sd_uart_pins>;
+ pinctrl-7 = <&sd_to_ao_uart_clr_pins &ao_to_sd_uart_pins>;
+ pinctrl-8 = <&sd_all_pins &sd_to_ao_uart_pins>;
+ clocks = <&clkc CLKID_SD_EMMC_B>,
+ <&clkc CLKID_SD_EMMC_B_P0_COMP>,
+ <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "core", "clkin0", "clkin1";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
+ disable-wp;
+ sd {
+ pinname = "sd";
+ ocr_avail = <0x200080>; /**VDD voltage 3.3 ~ 3.4 */
+ caps = "MMC_CAP_4_BIT_DATA",
+ "MMC_CAP_MMC_HIGHSPEED",
+ "MMC_CAP_SD_HIGHSPEED";
+ /* "MMC_CAP_UHS_SDR12",
+ * "MMC_CAP_UHS_SDR25",
+ * "MMC_CAP_UHS_SDR50",
+ * "MMC_CAP_UHS_SDR104";
+ */
+ f_min = <400000>;
+ f_max = <100000000>;
+ max_req_size = <0x20000>; /**128KB*/
+ gpio_dat3 = <&gpio CARD_4 GPIO_ACTIVE_HIGH>;
+ jtag_pin = <&gpio CARD_0 GPIO_ACTIVE_HIGH>;
+ gpio_cd = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+ card_type = <5>;
+ /* 0:unknown,
+ * 1:mmc card(include eMMC),
+ * 2:sd card(include tSD),
+ * 3:sdio device(ie:sdio-wifi),
+ * 4:SD combo (IO+mem) card,
+ * 5:NON sdio device(means sd/mmc card),
+ * other:reserved
+ */
+ };
+ };
+
+ sd_emmc_a:sdio@d0070000 {
+ status = "okay";
+ compatible = "amlogic, meson-mmc-gxl";
+ reg = <0x0 0xd0070000 0x0 0x2000>;
+ interrupts = <0 216 4>;
+ pinctrl-names = "sdio_clk_cmd_pins", "sdio_all_pins";
+ pinctrl-0 = <&sdio_clk_cmd_pins>;
+ pinctrl-1 = <&sdio_all_pins>;
+ clocks = <&clkc CLKID_SD_EMMC_A>,
+ <&clkc CLKID_SD_EMMC_A_P0_COMP>,
+ <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "core", "clkin0", "clkin1";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <100000000>;
+ non-removable;
+ disable-wp;
+ sdio {
+ pinname = "sdio";
+ ocr_avail = <0x200080>; /**VDD voltage 3.3 ~ 3.4 */
+ caps = "MMC_CAP_4_BIT_DATA",
+ "MMC_CAP_MMC_HIGHSPEED",
+ "MMC_CAP_SD_HIGHSPEED",
+ "MMC_CAP_NONREMOVABLE",
+ "MMC_CAP_UHS_SDR12",
+ "MMC_CAP_UHS_SDR25",
+ "MMC_CAP_UHS_SDR50",
+ "MMC_CAP_UHS_SDR104",
+ "MMC_PM_KEEP_POWER",
+ "MMC_CAP_SDIO_IRQ";
+ f_min = <400000>;
+ f_max = <200000000>;
+ max_req_size = <0x20000>; /**128KB*/
+ card_type = <3>;
+ /* 3:sdio device(ie:sdio-wifi),
+ * 4:SD combo (IO+mem) card
+ */
+ };
+ };
+ mtd_nand{
+ compatible = "amlogic, aml_mtd_nand";
+ dev_name = "mtdnand";
+ status = "disabled";
+ reg = <0x0 0xd0074800 0x0 0x200>;
+ interrupts = < 0 34 1 >;
+ pinctrl-names = "nand_rb_mod","nand_norb_mod", "nand_cs_only";
+ pinctrl-0 = <&all_nand_pins>;
+ pinctrl-1 = <&all_nand_pins>;
+ pinctrl-2 = <&nand_cs_pins>;
+ device_id = <0>;
+ plat-names = "bootloader","nandnormal";
+ plat-num = <2>;
+ plat-part-0 = <&bootloader>;
+ plat-part-1 = <&nandnormal>;
+ bootloader: bootloader{
+ enable_pad ="ce0";
+ busy_pad = "rb0";
+ timming_mode = "mode5";
+ bch_mode = "bch60_1k";
+ t_rea = <20>;
+ t_rhoh = <15>;
+ chip_num = <1>;
+ part_num = <0>;
+ rb_detect = <1>;
+ };
+ nandnormal: nandnormal{
+ enable_pad ="ce0","ce1";
+ busy_pad = "rb0","rb1";
+ timming_mode = "mode5";
+ bch_mode = "bch60_1k";
+ plane_mode = "twoplane";
+ t_rea = <20>;
+ t_rhoh = <15>;
+ chip_num = <2>;
+ part_num = <3>;
+ partition = <&nand_partitions>;
+ rb_detect = <1>;
+ };
+ nand_partitions:nand_partition{
+ logo{
+ offset=<0x0 0x0>;
+ size=<0x0 0x200000>;
+ };
+ recovery{
+ offset=<0x0 0x0>;
+ size=<0x0 0x1000000>;
+ };
+ boot{
+ offset=<0x0 0x0>;
+ size=<0x0 0xC00000>;
+ };
+ system{
+ offset=<0x0 0x0>;
+ size=<0x0 0xDC40000>;
+ };
+ data{
+ offset=<0xffffffff 0xffffffff>;
+ size=<0x0 0x0>;
+ };
+ };
+ };
+
+ ethmac: ethernet@0xc9410000 {
+ compatible = "amlogic, gxbb-eth-dwmac";
+ reg = <0x0 0xc9410000 0x0 0x10000
+ 0x0 0xc8834540 0x0 0x8
+ 0x0 0xc8834558 0x0 0xc>;
+ interrupts = <0 8 1>;
+ pinctrl-names = "external_eth_pins";
+ pinctrl-0 = <&external_eth_pins>;
+ rst_pin-gpios = <&gpio GPIOZ_14 0>;
+ GPIOZ4_pin-gpios = <&gpio GPIOZ_4 0>;
+ GPIOZ5_pin-gpios = <&gpio GPIOZ_5 0>;
+ mc_val_internal_phy = <0x1800>;
+ mc_val_external_phy = <0x1621>;
+ cali_val = <0x20000>;
+ interrupt-names = "macirq";
+ clocks = <&clkc CLKID_ETH>;
+ clock-names = "ethclk81";
+ internal_phy=<1>;
+ };
+
+ aml_sensor0: aml-sensor@0 {
+ compatible = "amlogic, aml-thermal";
+ device_name = "thermal";
+ #thermal-sensor-cells = <1>;
+ cooling_devices {
+ cpufreq_cool_cluster0 {
+ min_state = <1000000>;
+ dyn_coeff = <140>;
+ cluster_id = <0>;
+ node_name = "cpufreq_cool0";
+ device_type = "cpufreq";
+ };
+ cpucore_cool_cluster0 {
+ min_state = <1>;
+ dyn_coeff = <0>;
+ cluster_id = <0>;
+ node_name = "cpucore_cool0";
+ device_type = "cpucore";
+ };
+ gpufreq_cool {
+ min_state = <400>;
+ dyn_coeff = <437>;
+ cluster_id = <0>;
+ node_name = "gpufreq_cool0";
+ device_type = "gpufreq";
+ };
+ gpucore_cool {
+ min_state = <1>;
+ dyn_coeff = <0>;
+ cluster_id = <0>;
+ node_name = "gpucore_cool0";
+ device_type = "gpucore";
+ };
+ };
+ cpufreq_cool0:cpufreq_cool0 {
+ #cooling-cells = <2>; /* min followed by max */
+ };
+ cpucore_cool0:cpucore_cool0 {
+ #cooling-cells = <2>; /* min followed by max */
+ };
+ gpufreq_cool0:gpufreq_cool0 {
+ #cooling-cells = <2>; /* min followed by max */
+ };
+ gpucore_cool0:gpucore_cool0 {
+ #cooling-cells = <2>; /* min followed by max */
+ };
+ };
+ thermal-zones {
+ soc_thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <100>;
+ sustainable-power = <2150>;
+
+ thermal-sensors = <&aml_sensor0 3>;
+
+ trips {
+ switch_on: trip-point@0 {
+ temperature = <70000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ control: trip-point@1 {
+ temperature = <80000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ hot: trip-point@2 {
+ temperature = <85000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+ critical: trip-point@3 {
+ temperature = <260000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ cpufreq_cooling_map {
+ trip = <&control>;
+ cooling-device = <&cpufreq_cool0 0 4>;
+ contribution = <1024>;
+ };
+ cpucore_cooling_map {
+ trip = <&control>;
+ cooling-device = <&cpucore_cool0 0 3>;
+ contribution = <1024>;
+ };
+ gpufreq_cooling_map {
+ trip = <&control>;
+ cooling-device = <&gpufreq_cool0 0 4>;
+ contribution = <1024>;
+ };
+ gpucore_cooling_map {
+ trip = <&control>;
+ cooling-device = <&gpucore_cool0 0 2>;
+ contribution = <1024>;
+ };
+ };
+ };
+ };
+
+ dwc3: dwc3@c9000000 {
+ compatible = "synopsys, dwc3";
+ reg = <0x0 0xc9000000 0x0 0x100000>;
+ interrupts = <0 30 4>;
+ usb-phy = <&usb2_phy>, <&usb3_phy>;
+ cpu-type = "gxl";
+ clock-src = "usb3.0";
+ };
+
+ usb2_phy: usb2phy@d0078000 {
+ compatible = "amlogic, amlogic-new-usb2";
+ portnum = <3>;
+ reg = <0x0 0xd0078000 0x0 0x80
+ 0x0 0xc1104408 0x0 0x4>;
+ };
+
+ usb3_phy: usb3phy@d0078080 {
+ compatible = "amlogic, amlogic-new-usb3";
+ portnum = <0>;
+ reg = <0x0 0xd0078080 0x0 0x20>;
+ };
+
+ dwc2_a {
+ compatible = "amlogic, dwc2";
+ device_name = "dwc2_a";
+ reg = <0x0 0xc9100000 0x0 0x40000>;
+ status = "okay";
+ interrupts = <0 31 4>;
+ pl-periph-id = <0>; /** lm name */
+ clock-src = "usb0"; /** clock src */
+ port-id = <0>; /** ref to mach/usb.h */
+ port-type = <2>; /** 0: otg, 1: host, 2: slave */
+ port-speed = <0>; /** 0: default, high, 1: full */
+ port-config = <0>; /** 0: default */
+ port-dma = <0>; /** 0: default ... 6: disable*/
+ port-id-mode = <0>; /** 0: hardware, 1: sw_host, 2: sw_slave*/
+ usb-fifo = <728>;
+ cpu-type = "gxl";
+ controller-type = <1>; /** 0: normal, 1: host, 2: device*/
+ phy-reg = <0xd0078000>;
+ phy-reg-size = <0xa0>;
+ clocks = <&clkc CLKID_USB_GENERAL
+ &clkc CLKID_USB1_TO_DDR
+ &clkc CLKID_USB1>;
+ clock-names = "usb_general",
+ "usb1",
+ "usb1_to_ddr";
+ };
+
+ meson-amvideom {
+ compatible = "amlogic, amvideom";
+ dev_name = "amvideom";
+ status = "okay";
+ interrupts = <0 3 1>;
+ interrupt-names = "vsync";
+ };
+
+ vout {
+ compatible = "amlogic, vout";
+ dev_name = "vout";
+ status = "okay";
+ fr_auto_policy = <0>;
+ };
+
+ vdac {
+ compatible = "amlogic, vdac";
+ dev_name = "vdac";
+ status = "okay";
+ };
+
+ cvbsout {
+ compatible = "amlogic, cvbsout-gxl";
+ dev_name = "cvbsout";
+ status = "okay";
+ clocks = <&clkc CLKID_VCLK2_ENCI
+ &clkc CLKID_VCLK2_VENCI0
+ &clkc CLKID_VCLK2_VENCI1
+ &clkc CLKID_DAC_CLK>;
+ clock-names = "venci_top_gate",
+ "venci_0_gate",
+ "venci_1_gate",
+ "vdac_clk_gate";
+
+ /* performance: reg_address, reg_value */
+ /* s905x */
+ performance = <0x1bf0 0x9
+ 0x1b56 0x343
+ 0x1b12 0x8080
+ 0x1b05 0xfd
+ 0x1c59 0xf752
+ 0xffff 0x0>; /* ending flag */
+ };
+
+ amhdmitx: amhdmitx{
+ compatible = "amlogic, amhdmitx";
+ dev_name = "amhdmitx";
+ status = "okay";
+ vend-data = <&vend_data>;
+ pinctrl-names="hdmitx_hpd", "hdmitx_ddc";
+ pinctrl-0=<&hdmitx_hpd>;
+ pinctrl-1=<&hdmitx_ddc>;
+ /* HPD, 57 + 32 = 89; CEC, 151 + 32 = 183*/
+ interrupts = <0 57 1>;
+ interrupt-names = "hdmitx_hpd";
+ /* 0:M8B 1:GXBB 2:GXTVBB 3:GXL 4:GXM
+ * 5:TXL 6:TXLX 7:AXG 8:GXLX 9:TXHD
+ */
+ ic_type = <3>;
+ vend_data: vend_data{ /* Should modified by Customer */
+ vendor_name = "Amlogic"; /* Max Chars: 8 */
+ /* standards.ieee.org/develop/regauth/oui/oui.txt */
+ vendor_id = <0x000000>;
+ product_desc = "MBox Meson Ref"; /* Max Chars: 16 */
+ };
+ };
+
+ aocec: aocec{
+ compatible = "amlogic, amlogic-aocec";
+ device_name = "aocec";
+ status = "okay";
+ vendor_id = <0x000000>;
+ cec_osd_string = "MBox"; /* Max Chars: 14 */
+ cec_version = <5>; /* 5: 1.4, 6: 2.0 */
+ port_num = <1>;
+ arc_port_mask = <0x0>;
+ interrupts = <0 199 1>;
+ interrupt-names = "hdmi_aocec";
+ pinctrl-names = "default";
+ pinctrl-0=<&hdmitx_aocec>;
+ reg = <0x0 0xc810023c 0x0 0x4
+ 0x0 0xc8100000 0x0 0x200>;
+ };
+
+ sysled {
+ compatible = "amlogic, sysled";
+ dev_name = "sysled";
+ status = "disabled";
+ led_gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+ led_active_low = <1>;
+ };
+
+ codec_io {
+ compatible = "amlogic, codec_io";
+ #address-cells=<2>;
+ #size-cells=<2>;
+ ranges;
+ io_cbus_base{
+ reg = <0x0 0xC1100000 0x0 0x100000>;
+ };
+ io_dos_base{
+ reg = <0x0 0xc8820000 0x0 0x10000>;
+ };
+ io_hiubus_base{
+ reg = <0x0 0xc883c000 0x0 0x2000>;
+ };
+ io_aobus_base{
+ reg = <0x0 0xc8100000 0x0 0x100000>;
+ };
+ io_vcbus_base{
+ reg = <0x0 0xd0100000 0x0 0x40000>;
+ };
+ io_dmc_base{
+ reg = <0x0 0xc8838000 0x0 0x400>;
+ };
+ };
+
+ codec_mm {
+ compatible = "amlogic, codec, mm";
+ memory-region = <&codec_mm_cma &codec_mm_reserved>;
+ dev_name = "codec_mm";
+ status = "okay";
+ };
+
+ canvas{
+ compatible = "amlogic, meson, canvas";
+ dev_name = "amlogic-canvas";
+ status = "ok";
+ reg = <0x0 0xc8838000 0x0 0x400>;
+ };
+
+ mesonstream {
+ compatible = "amlogic, codec, streambuf";
+ dev_name = "mesonstream";
+ status = "okay";
+ clocks = <&clkc CLKID_DOS_PARSER
+ &clkc CLKID_DEMUX
+ &clkc CLKID_DOS
+ &clkc CLKID_VDEC_MUX
+ &clkc CLKID_HCODEC_MUX
+ &clkc CLKID_HEVC_MUX>;
+ clock-names = "parser_top",
+ "demux",
+ "vdec",
+ "clk_vdec_mux",
+ "clk_hcodec_mux",
+ "clk_hevc_mux";
+ };
+
+ vdec {
+ compatible = "amlogic, vdec";
+ dev_name = "vdec.0";
+ status = "okay";
+ interrupts = <0 3 1
+ 0 23 1
+ 0 32 1
+ 0 43 1
+ 0 44 1
+ 0 45 1>;
+ interrupt-names = "vsync",
+ "demux",
+ "parser",
+ "mailbox_0",
+ "mailbox_1",
+ "mailbox_2";
+ };
+
+ gpio_keypad{
+ compatible = "amlogic, gpio_keypad";
+ status = "okay";
+ scan_period = <20>;
+ key_num = <1>;
+ key_name = "power";
+ key_code = <116>;
+ key_pin = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+ interrupts = <0 70 1
+ 0 71 2>;
+ interrupt-names = "irq_keyup", "irq_keydown";
+ };
+ meson-fb {
+ compatible = "amlogic, meson-gxl";
+ memory-region = <&logo_reserved>;
+ dev_name = "meson-fb";
+ status = "okay";
+ interrupts = <0 3 1
+ 0 89 1>;
+ interrupt-names = "viu-vsync", "rdma";
+ mem_size = <0x00800000 0x01800000 0x00100000>;
+ /* uboot logo,fb0/fb1 memory size,if afbcd fb0=0x01851000*/
+ display_mode_default = "1080p60hz";
+ scale_mode = <1>;
+ /** 0:VPU free scale 1:OSD free scale 2:OSD super scale */
+ display_size_default = <1920 1080 1920 3240 32>;
+ /*1920*1080*4*3 = 0x17BB000*/
+ logo_addr = "0x3f800000";
+ };
+ ge2d {
+ compatible = "amlogic, ge2d";
+ dev_name = "ge2d";
+ status = "okay";
+ interrupts = <0 150 1>;
+ interrupt-names = "ge2d";
+ clocks = <&clkc CLKID_VAPB_MUX>,
+ <&clkc CLKID_G2D>,
+ <&clkc CLKID_GE2D_GATE>;
+ clock-names = "clk_vapb_0",
+ "clk_ge2d",
+ "clk_ge2d_gate";
+ };
+
+
+ /* AUDIO MESON DEVICES */
+ i2s_dai: I2S {
+ #sound-dai-cells = <0>;
+ compatible = "amlogic, aml-i2s-dai";
+ clocks =
+ <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_AMCLK_COMP>,
+ <&clkc CLKID_AIU_GLUE>,
+ <&clkc CLKID_IEC958>,
+ <&clkc CLKID_I2S_OUT>,
+ <&clkc CLKID_AMCLK>,
+ <&clkc CLKID_AIFIFO2>,
+ <&clkc CLKID_MIXER>,
+ <&clkc CLKID_MIXER_IFACE>,
+ <&clkc CLKID_ADC>,
+ <&clkc CLKID_AIU_TOP>,
+ <&clkc CLKID_AOCLK_GATE>,
+ <&clkc CLKID_I2S_SPDIF>;
+ clock-names =
+ "mpll",
+ "mclk",
+ "top_glue",
+ "aud_buf",
+ "i2s_out",
+ "amclk_measure",
+ "aififo2",
+ "aud_mixer",
+ "mixer_reg",
+ "adc",
+ "top_level",
+ "aoclk",
+ "aud_in";
+ i2s_pos_sync = <0>;
+ /*DMIC;*/ /* I2s Mic or Dmic, default for I2S mic */
+ };
+ dmic:snd_dmic {
+ #sound-dai-cells = <0>;
+ compatible = "aml, aml_snd_dmic";
+ reg = <0x0 0xd0042000 0x0 0x2000>;
+ status = "disabled";
+ resets = <
+ &clkc CLKID_PDM_GATE
+ >;
+ reset-names = "pdm";
+ pinctrl-names = "audio_dmic";
+ pinctrl-0 = <&aml_dmic_pins>;
+ clocks = <&clkc CLKID_PDM_COMP>,
+ <&clkc CLKID_AMCLK_COMP>;
+ clock-names = "pdm", "mclk";
+ };
+ spdif_dai: SPDIF {
+ #sound-dai-cells = <0>;
+ compatible = "amlogic, aml-spdif-dai";
+ clocks =
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_I958_COMP>,
+ <&clkc CLKID_AMCLK_COMP>,
+ <&clkc CLKID_I958_COMP_SPDIF>,
+ <&clkc CLKID_CLK81>,
+ <&clkc CLKID_IEC958>,
+ <&clkc CLKID_IEC958_GATE>;
+ clock-names =
+ "mpll1",
+ "i958",
+ "mclk",
+ "spdif",
+ "clk_81",
+ "iec958",
+ "iec958_amclk";
+ };
+ pcm_dai: PCM {
+ #sound-dai-cells = <0>;
+ compatible = "amlogic, aml-pcm-dai";
+ pinctrl-names = "audio_pcm";
+ pinctrl-0 = <&audio_pcm_pins>;
+ clocks =
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_PCM_MCLK_COMP>,
+ <&clkc CLKID_PCM_SCLK_GATE>;
+ clock-names =
+ "mpll0",
+ "pcm_mclk",
+ "pcm_sclk";
+ pcm_mode = <1>; /* 0=slave mode, 1=master mode */
+ };
+ i2s_plat: i2s_platform {
+ compatible = "amlogic, aml-i2s";
+ interrupts = <0 29 1>;
+ };
+ pcm_plat: pcm_platform {
+ compatible = "amlogic, aml-pcm";
+ };
+ spdif_codec: spdif_codec{
+ #sound-dai-cells = <0>;
+ compatible = "amlogic, aml-spdif-codec";
+ pinctrl-names = "audio_spdif";
+ pinctrl-0 = <&audio_spdif_pins>;
+ };
+ pcm_codec: pcm_codec{
+ #sound-dai-cells = <0>;
+ compatible = "amlogic, pcm2BT-codec";
+ };
+ /* endof AUDIO MESON DEVICES */
+
+ /* AUDIO board specific */
+ dummy_codec:dummy{
+ #sound-dai-cells = <0>;
+ compatible = "amlogic, aml_dummy_codec";
+ status = "disable";
+ };
+ amlogic_codec:t9015{
+ #sound-dai-cells = <0>;
+ compatible = "amlogic, aml_codec_T9015";
+ reg = <0x0 0xc8832000 0x0 0x14>;
+ status = "okay";
+ };
+ aml_sound_meson {
+ compatible = "aml, meson-snd-card";
+ status = "okay";
+ aml-sound-card,format = "i2s";
+ aml_sound_card,name = "AML-MESONAUDIO";
+ aml,audio-routing =
+ "Ext Spk","LOUTL",
+ "Ext Spk","LOUTR";
+
+ mute_gpio-gpios = <&gpio GPIOH_5 0>;
+ mute_inv;
+ hp_disable;
+ hp_paraments = <800 300 0 5 1>;
+ pinctrl-names = "audio_i2s";
+ pinctrl-0 = <&audio_i2s_pins>;
+ cpu_list = <&cpudai0 &cpudai1 &cpudai2>;
+ codec_list = <&codec0 &codec1 &codec2>;
+ plat_list = <&i2s_plat &i2s_plat &pcm_plat>;
+ cpudai0: cpudai0 {
+ sound-dai = <&i2s_dai>;
+ };
+ cpudai1: cpudai1 {
+ sound-dai = <&spdif_dai>;
+ };
+ cpudai2: cpudai2 {
+ sound-dai = <&pcm_dai>;
+ };
+ codec0: codec0 {
+ sound-dai = <&amlogic_codec>;
+ };
+ codec1: codec1 {
+ sound-dai = <&spdif_codec>;
+ };
+ codec2: codec2 {
+ sound-dai = <&pcm_codec>;
+ };
+ };
+ /* END OF AUDIO board specific */
+ rdma{
+ compatible = "amlogic, meson, rdma";
+ dev_name = "amlogic-rdma";
+ status = "ok";
+ interrupts = <0 89 1>;
+ interrupt-names = "rdma";
+ };
+
+ amvenc_avc{
+ compatible = "amlogic, amvenc_avc";
+ dev_name = "amvenc_avc";
+ status = "okay";
+ interrupts = <0 45 1>;
+ interrupt-names = "mailbox_2";
+ };
+
+ hevc_enc{
+ compatible = "cnm, HevcEnc";
+ dev_name = "HevcEnc";
+ status = "okay";
+ interrupts = <0 187 1>;
+ interrupt-names = "wave420l_irq";
+ #address-cells=<2>;
+ #size-cells=<2>;
+ ranges;
+ io_reg_base{
+ reg = <0x0 0xc8810000 0x0 0x4000>;
+ };
+ };
+
+ picdec {
+ compatible = "amlogic, picdec";
+ memory-region = <&picdec_cma_reserved>;
+ dev_name = "picdec";
+ status = "okay";
+ };
+
+ ppmgr {
+ compatible = "amlogic, ppmgr";
+ memory-region = <&ppmgr_reserved>;
+ dev_name = "ppmgr";
+ status = "okay";
+ };
+
+ deinterlace {
+ compatible = "amlogic, deinterlace";
+ status = "okay";
+ flag_cma = <1>;/*0:use reserved;1:use cma*/
+ //memory-region = <&di_reserved>;
+ memory-region = <&di_cma_reserved>;
+ interrupts = <0 46 1 0 6 1>;
+ interrupt-names = "de_irq", "timerc";
+ /*
+ * nr_size(byte) = 1920*544*2(yuv422 8bit) |
+ * 1920*544*2*12/8(yuv422 10bit)
+ * | 1920*544*2*10/8(yuv422 10bit full pack mode)
+ */
+ /* mtn_size(byte) = 1920*544/2 */
+ /* count_size(byte) = 1920*544/2 */
+ buffer-size = <3133440>;
+ hw-version = <2>;
+ };
+
+ ionvideo {
+ compatible = "amlogic, ionvideo";
+ dev_name = "ionvideo";
+ status = "okay";
+ };
+
+ amlvideo {
+ compatible = "amlogic, amlvideo";
+ dev_name = "amlvideo";
+ status = "okay";
+ };
+
+ amlvideo2_0 {
+ compatible = "amlogic, amlvideo2";
+ dev_name = "amlvideo2";
+ status = "okay";
+ amlvideo2_id = <0>;
+ cma_mode = <1>;
+ };
+
+ amlvideo2_1 {
+ compatible = "amlogic, amlvideo2";
+ dev_name = "amlvideo2";
+ status = "okay";
+ amlvideo2_id = <1>;
+ cma_mode = <1>;
+ };
+
+ /*if you want to use vdin just modify status to "ok"*/
+ vdin0 {
+ compatible = "amlogic, vdin";
+ /*memory-region = <&vdin0_cma_reserved>;*/
+ dev_name = "vdin0";
+ status = "ok";
+ reserve-iomap = "true";
+ flag_cma = <1>;/*1:share with codec_mm;2:cma alone*/
+ /*MByte, if 10bit disable: 64M(YUV422),
+ *if 10bit enable: 64*1.5 = 96M(YUV422)
+ *if support 4K2K-YUV444-10bit-WR:3840*2160*4*4 ~= 128M
+ *if support 4K2K-YUV422-10bit-wr:3840*2160*3*4 ~= 96M
+ *if support 4K2K-YUV422-8BIT-WR:3840*2160*2*4 ~= 64M
+ *if support 1080p-YUV422-8BIT-WR:1920*1080*2*4 ~= 16M
+ */
+ cma_size = <16>;
+ interrupts = <0 83 1>;
+ rdma-irq = <2>;
+ /*clocks = <&clock CLK_FPLL_DIV5>,
+ * <&clock CLK_VDIN_MEAS_CLK>;
+ *clock-names = "fclk_div5", "cts_vdin_meas_clk";
+ */
+ vdin_id = <0>;
+ /*vdin write mem color depth support:
+ *bit0:support 8bit
+ *bit1:support 9bit
+ *bit2:support 10bit
+ *bit3:support 12bit
+ *bit4:support yuv422 10bit full pack mode (from txl new add)
+ */
+ tv_bit_mode = <1>;
+ };
+ vdin1 {
+ compatible = "amlogic, vdin";
+ memory-region = <&vdin1_cma_reserved>;
+ dev_name = "vdin1";
+ status = "ok";
+ reserve-iomap = "true";
+ flag_cma = <0>;/*1:share with codec_mm;0:cma alone*/
+ interrupts = <0 85 1>;
+ rdma-irq = <4>;
+ /*clocks = <&clock CLK_FPLL_DIV5>,
+ * <&clock CLK_VDIN_MEAS_CLK>;
+ *clock-names = "fclk_div5", "cts_vdin_meas_clk";
+ */
+ vdin_id = <1>;
+ /*vdin write mem color depth support:
+ *bit0:support 8bit
+ *bit1:support 9bit
+ *bit2:support 10bit
+ *bit3:support 12bit
+ */
+ tv_bit_mode = <1>;
+ };
+
+ amlvecm {
+ compatible = "amlogic, vecm";
+ dev_name = "aml_vecm";
+ status = "okay";
+ gamma_en = <0>;/*1:enabel ;0:disable*/
+ wb_en = <0>;/*1:enabel ;0:disable*/
+ cm_en = <0>;/*1:enabel ;0:disable*/
+ };
+
+ unifykey{
+ compatible = "amlogic, unifykey";
+ status = "ok";
+
+ unifykey-num = <16>;
+ unifykey-index-0 = <&keysn_0>;
+ unifykey-index-1 = <&keysn_1>;
+ unifykey-index-2 = <&keysn_2>;
+ unifykey-index-3 = <&keysn_3>;
+ unifykey-index-4 = <&keysn_4>;
+ unifykey-index-5 = <&keysn_5>;
+ unifykey-index-6 = <&keysn_6>;
+ unifykey-index-7 = <&keysn_7>;
+ unifykey-index-8 = <&keysn_8>;
+ unifykey-index-9 = <&keysn_9>;
+ unifykey-index-10= <&keysn_10>;
+ unifykey-index-11= <&keysn_11>;
+ unifykey-index-12= <&keysn_12>;
+ unifykey-index-13= <&keysn_13>;
+ unifykey-index-14= <&keysn_14>;
+ unifykey-index-15= <&keysn_15>;
+
+ keysn_0: key_0{
+ key-name = "usid";
+ key-device = "normal";
+ key-permit = "read","write","del";
+ };
+ keysn_1:key_1{
+ key-name = "mac";
+ key-device = "normal";
+ key-permit = "read","write","del";
+ };
+ keysn_2:key_2{
+ key-name = "hdcp";
+ key-device = "secure";
+ key-type = "sha1";
+ key-permit = "read","write","del";
+ };
+ keysn_3:key_3{
+ key-name = "secure_boot_set";
+ key-device = "efuse";
+ key-permit = "write";
+ };
+ keysn_4:key_4{
+ key-name = "mac_bt";
+ key-device = "normal";
+ key-permit = "read","write","del";
+ key-type = "mac";
+ };
+ keysn_5:key_5{
+ key-name = "mac_wifi";
+ key-device = "normal";
+ key-permit = "read","write","del";
+ key-type = "mac";
+ };
+ keysn_6:key_6{
+ key-name = "hdcp2_tx";
+ key-device = "normal";
+ key-permit = "read","write","del";
+ };
+ keysn_7:key_7{
+ key-name = "hdcp2_rx";
+ key-device = "normal";
+ key-permit = "read","write","del";
+ };
+ keysn_8:key_8{
+ key-name = "widevinekeybox";
+ key-device = "secure";
+ key-permit = "read","write","del";
+ };
+ keysn_9:key_9{
+ key-name = "deviceid";
+ key-device = "normal";
+ key-permit = "read","write","del";
+ };
+ keysn_10:key_10{
+ key-name = "hdcp22_fw_private";
+ key-device = "secure";
+ key-permit = "read","write","del";
+ };
+ keysn_11:key_11{
+ key-name = "PlayReadykeybox25";
+ key-device = "secure";
+ key-permit = "read","write","del";
+ };
+ keysn_12:key_12{
+ key-name = "prpubkeybox";// PlayReady
+ key-device = "secure";
+ key-permit = "read","write","del";
+ };
+ keysn_13:key_13{
+ key-name = "prprivkeybox";// PlayReady
+ key-device = "secure";
+ key-permit = "read","write","del";
+ };
+ keysn_14:key_14{
+ key-name = "attestationkeybox";// attestation key
+ key-device = "secure";
+ key-permit = "read","write","del";
+ };
+ keysn_15: key_15{
+ key-name = "region_code";
+ key-device = "normal";
+ key-permit = "read","write","del";
+ };
+ };//End unifykey
+
+};
+&efuse {
+ status = "ok";
+};
+
+&pwm_ef {
+ status = "okay";
+};
+
+&audio_data{
+ status = "okay";
+};
+&spicc{
+ status = "disabled";
+ pinctrl-names = "spicc_pulldown","spicc_pullup";
+ pinctrl-0 = <&spicc_pulldown_x8x9x11>;
+ pinctrl-1 = <&spicc_pullup_x8x9x11>;
+ num_chipselect = <1>;
+ cs-gpios = <&gpio GPIOX_10 GPIO_ACTIVE_HIGH>;
+ dma_en = <0>;
+ dma_tx_threshold = <3>;
+ dma_rx_threshold = <3>;
+ dma_num_per_read_burst = <3>;
+ dma_num_per_write_burst = <3>;
+ delay_control = <0x15>;
+ ssctl = <0>;
+};
--- /dev/null
+/*
+ * arch/arm64/boot/dts/amlogic/gxl_sei210_2g.dts
+ *
+ * Copyright (C) 2017 Amlogic, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "partition_mbox_normal_sei32bit.dtsi"
+#include "mesongxl_sei210.dtsi"
+/ {
+ model = "Amlogic";
+ amlogic-dt-id = "gxl_sei210_2g";
+ compatible = "amlogic, Gxl";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &uart_AO;
+ serial1 = &uart_A;
+ serial2 = &uart_B;
+ serial3 = &uart_C;
+ serial4 = &uart_AO_B;
+ };
+
+ ion_dev {
+ compatible = "amlogic, ion_dev";
+ memory-region = <&ion_reserved>;
+ };
+
+ memory@00000000 {
+ device_type = "memory";
+ linux,usable-memory = <0x0 0x0100000 0x0 0x7ff00000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ /* global autoconfigured region for contiguous allocations */
+ ramoops@0x07400000 {
+ compatible = "ramoops";
+ reg = <0x0 0x07400000 0x0 0x00100000>;
+ record-size = <0x8000>;
+ console-size = <0x8000>;
+ ftrace-size = <0x0>;
+ pmsg-size = <0x8000>;
+ };
+ secmon_reserved:linux,secmon {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0x0 0x400000>;
+ alignment = <0x0 0x400000>;
+ alloc-ranges = <0x0 0x05000000 0x0 0x400000>;
+ };
+ secos_reserved:linux,secos {
+ status = "disable";
+ compatible = "amlogic, aml_secos_memory";
+ reg = <0x0 0x05300000 0x0 0x2000000>;
+ no-map;
+ };
+ logo_reserved:linux,meson-fb {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0x0 0x800000>;
+ alignment = <0x0 0x400000>;
+ alloc-ranges = <0x0 0x7f800000 0x0 0x800000>;
+ };
+ //don't put other dts in front of logo_reserved
+
+ //di_reserved:linux,di {
+ // compatible = "amlogic, di-mem";
+ /** 10x3133440=30M(0x1e) support 8bit **/
+ // size = <0x0 0x1e00000>;
+ //no-map;
+ //};
+ di_cma_reserved:linux,di_cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ /** 10x3133440=30M(0x1e) support 8bit **/
+ size = <0x0 0x2000000>;
+ alignment = <0x0 0x400000>;
+ };
+ ion_reserved:linux,ion-dev {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0x0 0x7C00000>;
+ alignment = <0x0 0x400000>;
+ };
+
+ /* vdin0 CMA pool */
+ //vdin0_cma_reserved:linux,vdin0_cma {
+ // compatible = "shared-dma-pool";
+ // linux,phandle = <4>;
+ // reusable;
+ /* 1920x1080x2x4 =16+4 M */
+ // size = <0x0 0x01400000>;
+ // alignment = <0x0 0x400000>;
+ //};
+ /* vdin1 CMA pool */
+ vdin1_cma_reserved:linux,vdin1_cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ /* 1920x1080x2x4 =16 M */
+ size = <0x0 0x01000000>;
+ alignment = <0x0 0x400000>;
+ };
+ /* POST PROCESS MANAGER */
+ ppmgr_reserved:linux,ppmgr {
+ compatible = "shared-dma-pool";
+ size = <0x0 0x0>;
+ };
+
+ codec_mm_cma:linux,codec_mm_cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ /* ion_codec_mm max can alloc size 80M*/
+ size = <0x0 0x13400000>;
+ alignment = <0x0 0x400000>;
+ linux,contiguous-region;
+ };
+ picdec_cma_reserved:linux,picdec {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0x0 0x0>;
+ alignment = <0x0 0x0>;
+ linux,contiguous-region;
+ };
+ /* codec shared reserved */
+ codec_mm_reserved:linux,codec_mm_reserved {
+ compatible = "amlogic, codec-mm-reserved";
+ size = <0x0 0x0>;
+ alignment = <0x0 0x100000>;
+ //no-map;
+ };
+ };
+
+ bt-dev{
+ compatible = "amlogic, bt-dev";
+ dev_name = "bt-dev";
+ status = "okay";
+ gpio_reset = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ };
+
+ wifi{
+ compatible = "amlogic, aml_wifi";
+ dev_name = "aml_wifi";
+ status = "okay";
+ interrupt_pin = <&gpio GPIOX_7 GPIO_ACTIVE_HIGH>;
+ irq_trigger_type = "GPIO_IRQ_LOW";
+ dhd_static_buf; //dhd_static_buf support
+ power_on_pin = <&gpio GPIOX_6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_32k_pins>;
+ pwm_config = <&wifi_pwm_conf>;
+ };
+
+ wifi_pwm_conf:wifi_pwm_conf{
+ pwm_channel1_conf {
+ pwms = <&pwm_ef MESON_PWM_0 30040 0>;
+ duty-cycle = <15020>;
+ times = <8>;
+ };
+ pwm_channel2_conf {
+ pwms = <&pwm_ef MESON_PWM_2 30030 0>;
+ duty-cycle = <15015>;
+ times = <12>;
+ };
+ };
+
+ sd_emmc_c: emmc@d0074000 {
+ status = "okay";
+ compatible = "amlogic, meson-mmc-gxl";
+ reg = <0x0 0xd0074000 0x0 0x2000>;
+ interrupts = <0 218 1>;
+ pinctrl-names = "emmc_clk_cmd_pins", "emmc_all_pins";
+ pinctrl-0 = <&emmc_clk_cmd_pins>;
+ pinctrl-1 = <&emmc_conf_pull_up &emmc_conf_pull_done>;
+ clocks = <&clkc CLKID_SD_EMMC_C>,
+ <&clkc CLKID_SD_EMMC_C_P0_COMP>,
+ <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "core", "clkin0", "clkin1";
+
+ bus-width = <8>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+
+ max-frequency = <200000000>;
+ non-removable;
+ disable-wp;
+ emmc {
+ pinname = "emmc";
+ ocr_avail = <0x200080>; /**VDD voltage 3.3 ~ 3.4 */
+ caps = "MMC_CAP_8_BIT_DATA",
+ "MMC_CAP_MMC_HIGHSPEED",
+ "MMC_CAP_SD_HIGHSPEED",
+ "MMC_CAP_NONREMOVABLE",
+ "MMC_CAP_1_8V_DDR",
+ "MMC_CAP_HW_RESET",
+ "MMC_CAP_ERASE",
+ "MMC_CAP_CMD23";
+ caps2 = "MMC_CAP2_HS200";
+ f_min = <400000>;
+ f_max = <100000000>;
+ max_req_size = <0x20000>; /**128KB*/
+ gpio_dat3 = <&gpio BOOT_3 GPIO_ACTIVE_HIGH>;
+ hw_reset = <&gpio BOOT_9 GPIO_ACTIVE_HIGH>;
+ card_type = <1>;
+ /* 1:mmc card(include eMMC),
+ * 2:sd card(include tSD)
+ */
+ };
+ };
+
+ sd_emmc_b:sd@d0072000 {
+ status = "disabled";
+ compatible = "amlogic, meson-mmc-gxl";
+ reg = <0x0 0xd0072000 0x0 0x2000>;
+ interrupts = <0 217 1>;
+ pinctrl-names = "sd_all_pins",
+ "sd_clk_cmd_pins",
+ "sd_1bit_pins",
+ "sd_clk_cmd_uart_pins",
+ "sd_1bit_uart_pins",
+ "sd_to_ao_uart_pins",
+ "ao_to_sd_uart_pins",
+ "ao_to_sd_jtag_pins",
+ "sd_to_ao_jtag_pins";
+ pinctrl-0 = <&sd_all_pins>;
+ pinctrl-1 = <&sd_clk_cmd_pins>;
+ pinctrl-2 = <&sd_1bit_pins>;
+ pinctrl-3 = <&sd_to_ao_uart_clr_pins
+ &sd_clk_cmd_pins &ao_to_sd_uart_pins>;
+ pinctrl-4 = <&sd_to_ao_uart_clr_pins
+ &sd_1bit_pins &ao_to_sd_uart_pins>;
+ pinctrl-5 = <&sd_all_pins &sd_to_ao_uart_pins>;
+ pinctrl-6 = <&sd_to_ao_uart_clr_pins &ao_to_sd_uart_pins>;
+ pinctrl-7 = <&sd_to_ao_uart_clr_pins &ao_to_sd_uart_pins>;
+ pinctrl-8 = <&sd_all_pins &sd_to_ao_uart_pins>;
+ clocks = <&clkc CLKID_SD_EMMC_B>,
+ <&clkc CLKID_SD_EMMC_B_P0_COMP>,
+ <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "core", "clkin0", "clkin1";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <100000000>;
+ disable-wp;
+ sd {
+ pinname = "sd";
+ ocr_avail = <0x200080>; /**VDD voltage 3.3 ~ 3.4 */
+ caps = "MMC_CAP_4_BIT_DATA",
+ "MMC_CAP_MMC_HIGHSPEED",
+ "MMC_CAP_SD_HIGHSPEED";
+ /* "MMC_CAP_UHS_SDR12",
+ * "MMC_CAP_UHS_SDR25",
+ * "MMC_CAP_UHS_SDR50",
+ * "MMC_CAP_UHS_SDR104";
+ */
+ f_min = <400000>;
+ f_max = <100000000>;
+ max_req_size = <0x20000>; /**128KB*/
+ gpio_dat3 = <&gpio CARD_4 GPIO_ACTIVE_HIGH>;
+ jtag_pin = <&gpio CARD_0 GPIO_ACTIVE_HIGH>;
+ gpio_cd = <&gpio CARD_6 GPIO_ACTIVE_HIGH>;
+ card_type = <5>;
+ /* 0:unknown,
+ * 1:mmc card(include eMMC),
+ * 2:sd card(include tSD),
+ * 3:sdio device(ie:sdio-wifi),
+ * 4:SD combo (IO+mem) card,
+ * 5:NON sdio device(means sd/mmc card),
+ * other:reserved
+ */
+ };
+ };
+
+ sd_emmc_a:sdio@d0070000 {
+ status = "okay";
+ compatible = "amlogic, meson-mmc-gxl";
+ reg = <0x0 0xd0070000 0x0 0x2000>;
+ interrupts = <0 216 4>;
+ pinctrl-names = "sdio_clk_cmd_pins", "sdio_all_pins";
+ pinctrl-0 = <&sdio_clk_cmd_pins>;
+ pinctrl-1 = <&sdio_all_pins>;
+ clocks = <&clkc CLKID_SD_EMMC_A>,
+ <&clkc CLKID_SD_EMMC_A_P0_COMP>,
+ <&clkc CLKID_FCLK_DIV2>;
+ clock-names = "core", "clkin0", "clkin1";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ max-frequency = <100000000>;
+ non-removable;
+ disable-wp;
+ sdio {
+ pinname = "sdio";
+ ocr_avail = <0x200080>; /**VDD voltage 3.3 ~ 3.4 */
+ caps = "MMC_CAP_4_BIT_DATA",
+ "MMC_CAP_MMC_HIGHSPEED",
+ "MMC_CAP_SD_HIGHSPEED",
+ "MMC_CAP_NONREMOVABLE",
+ "MMC_CAP_UHS_SDR12",
+ "MMC_CAP_UHS_SDR25",
+ "MMC_CAP_UHS_SDR50",
+ "MMC_CAP_UHS_SDR104",
+ "MMC_PM_KEEP_POWER",
+ "MMC_CAP_SDIO_IRQ";
+ f_min = <400000>;
+ f_max = <180000000>;
+ max_req_size = <0x20000>; /**128KB*/
+ card_type = <3>;
+ /* 3:sdio device(ie:sdio-wifi),
+ * 4:SD combo (IO+mem) card
+ */
+ };
+ };
+ mtd_nand{
+ compatible = "amlogic, aml_mtd_nand";
+ dev_name = "mtdnand";
+ status = "disabled";
+ reg = <0x0 0xd0074800 0x0 0x200>;
+ interrupts = < 0 34 1 >;
+ pinctrl-names = "nand_rb_mod","nand_norb_mod", "nand_cs_only";
+ pinctrl-0 = <&all_nand_pins>;
+ pinctrl-1 = <&all_nand_pins>;
+ pinctrl-2 = <&nand_cs_pins>;
+ device_id = <0>;
+ plat-names = "bootloader","nandnormal";
+ plat-num = <2>;
+ plat-part-0 = <&bootloader>;
+ plat-part-1 = <&nandnormal>;
+ bootloader: bootloader{
+ enable_pad ="ce0";
+ busy_pad = "rb0";
+ timming_mode = "mode5";
+ bch_mode = "bch60_1k";
+ t_rea = <20>;
+ t_rhoh = <15>;
+ chip_num = <1>;
+ part_num = <0>;
+ rb_detect = <1>;
+ };
+ nandnormal: nandnormal{
+ enable_pad ="ce0","ce1";
+ busy_pad = "rb0","rb1";
+ timming_mode = "mode5";
+ bch_mode = "bch60_1k";
+ plane_mode = "twoplane";
+ t_rea = <20>;
+ t_rhoh = <15>;
+ chip_num = <2>;
+ part_num = <3>;
+ partition = <&nand_partitions>;
+ rb_detect = <1>;
+ };
+ nand_partitions:nand_partition{
+ logo{
+ offset=<0x0 0x0>;
+ size=<0x0 0x200000>;
+ };
+ recovery{
+ offset=<0x0 0x0>;
+ size=<0x0 0x1000000>;
+ };
+ boot{
+ offset=<0x0 0x0>;
+ size=<0x0 0xC00000>;
+ };
+ system{
+ offset=<0x0 0x0>;
+ size=<0x0 0xDC40000>;
+ };
+ data{
+ offset=<0xffffffff 0xffffffff>;
+ size=<0x0 0x0>;
+ };
+ };
+ };
+
+ ethmac: ethernet@0xc9410000 {
+ status = "disabled";
+ compatible = "amlogic, gxbb-eth-dwmac";
+ reg = <0x0 0xc9410000 0x0 0x10000
+ 0x0 0xc8834540 0x0 0x8
+ 0x0 0xc8834558 0x0 0xc>;
+ interrupts = <0 8 1>;
+ pinctrl-names = "external_eth_pins";
+ pinctrl-0 = <&external_eth_pins>;
+ rst_pin-gpios = <&gpio GPIOZ_14 0>;
+ GPIOZ4_pin-gpios = <&gpio GPIOZ_4 0>;
+ GPIOZ5_pin-gpios = <&gpio GPIOZ_5 0>;
+ mc_val_internal_phy = <0x1800>;
+ mc_val_external_phy = <0x1621>;
+ cali_val = <0x20000>;
+ interrupt-names = "macirq";
+ clocks = <&clkc CLKID_ETH>;
+ clock-names = "ethclk81";
+ internal_phy=<1>;
+ };
+
+ codec_io {
+ compatible = "amlogic, codec_io";
+ #address-cells=<2>;
+ #size-cells=<2>;
+ ranges;
+ io_cbus_base{
+ reg = <0x0 0xC1100000 0x0 0x100000>;
+ };
+ io_dos_base{
+ reg = <0x0 0xc8820000 0x0 0x10000>;
+ };
+ io_hiubus_base{
+ reg = <0x0 0xc883c000 0x0 0x2000>;
+ };
+ io_aobus_base{
+ reg = <0x0 0xc8100000 0x0 0x100000>;
+ };
+ io_vcbus_base{
+ reg = <0x0 0xd0100000 0x0 0x40000>;
+ };
+ io_dmc_base{
+ reg = <0x0 0xc8838000 0x0 0x400>;
+ };
+ };
+
+ codec_mm {
+ compatible = "amlogic, codec, mm";
+ memory-region = <&codec_mm_cma &codec_mm_reserved>;
+ dev_name = "codec_mm";
+ status = "okay";
+ };
+
+ canvas{
+ compatible = "amlogic, meson, canvas";
+ dev_name = "amlogic-canvas";
+ status = "ok";
+ reg = <0x0 0xc8838000 0x0 0x400>;
+ };
+
+ mesonstream {
+ compatible = "amlogic, codec, streambuf";
+ dev_name = "mesonstream";
+ status = "okay";
+ clocks = <&clkc CLKID_DOS_PARSER
+ &clkc CLKID_DEMUX
+ &clkc CLKID_DOS
+ &clkc CLKID_VDEC_MUX
+ &clkc CLKID_HCODEC_MUX
+ &clkc CLKID_HEVC_MUX>;
+ clock-names = "parser_top",
+ "demux",
+ "vdec",
+ "clk_vdec_mux",
+ "clk_hcodec_mux",
+ "clk_hevc_mux";
+ };
+
+ vdec {
+ compatible = "amlogic, vdec";
+ dev_name = "vdec.0";
+ status = "okay";
+ interrupts = <0 3 1
+ 0 23 1
+ 0 32 1
+ 0 43 1
+ 0 44 1
+ 0 45 1>;
+ interrupt-names = "vsync",
+ "demux",
+ "parser",
+ "mailbox_0",
+ "mailbox_1",
+ "mailbox_2";
+ };
+
+ gpio_keypad{
+ compatible = "amlogic, gpio_keypad";
+ status = "okay";
+ scan_period = <20>;
+ key_num = <1>;
+ key_name = "power";
+ key_code = <116>;
+ key_pin = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_HIGH>;
+ interrupts = < 0 70 1
+ 0 71 2>;
+ interrupt-names = "irq_keyup", "irq_keydown";
+ };
+
+ aml_sensor0: aml-sensor@0 {
+ compatible = "amlogic, aml-thermal";
+ device_name = "thermal";
+ #thermal-sensor-cells = <1>;
+ cooling_devices {
+ cpufreq_cool_cluster0 {
+ min_state = <1000000>;
+ dyn_coeff = <140>;
+ cluster_id = <0>;
+ node_name = "cpufreq_cool0";
+ device_type = "cpufreq";
+ };
+ cpucore_cool_cluster0 {
+ min_state = <1>;
+ dyn_coeff = <0>;
+ cluster_id = <0>;
+ node_name = "cpucore_cool0";
+ device_type = "cpucore";
+ };
+ gpufreq_cool {
+ min_state = <400>;
+ dyn_coeff = <437>;
+ cluster_id = <0>;
+ node_name = "gpufreq_cool0";
+ device_type = "gpufreq";
+ };
+ gpucore_cool {
+ min_state = <1>;
+ dyn_coeff = <0>;
+ cluster_id = <0>;
+ node_name = "gpucore_cool0";
+ device_type = "gpucore";
+ };
+ };
+ cpufreq_cool0:cpufreq_cool0 {
+ #cooling-cells = <2>; /* min followed by max */
+ };
+ cpucore_cool0:cpucore_cool0 {
+ #cooling-cells = <2>; /* min followed by max */
+ };
+ gpufreq_cool0:gpufreq_cool0 {
+ #cooling-cells = <2>; /* min followed by max */
+ };
+ gpucore_cool0:gpucore_cool0 {
+ #cooling-cells = <2>; /* min followed by max */
+ };
+ };
+ thermal-zones {
+ soc_thermal {
+ polling-delay = <1000>;
+ polling-delay-passive = <100>;
+ sustainable-power = <2150>;
+
+ thermal-sensors = <&aml_sensor0 3>;
+
+ trips {
+ switch_on: trip-point@0 {
+ temperature = <70000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ control: trip-point@1 {
+ temperature = <80000>;
+ hysteresis = <1000>;
+ type = "passive";
+ };
+ hot: trip-point@2 {
+ temperature = <85000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+ critical: trip-point@3 {
+ temperature = <260000>;
+ hysteresis = <1000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ cpufreq_cooling_map {
+ trip = <&control>;
+ cooling-device = <&cpufreq_cool0 0 4>;
+ contribution = <1024>;
+ };
+ cpucore_cooling_map {
+ trip = <&control>;
+ cooling-device = <&cpucore_cool0 0 3>;
+ contribution = <1024>;
+ };
+ gpufreq_cooling_map {
+ trip = <&control>;
+ cooling-device = <&gpufreq_cool0 0 4>;
+ contribution = <1024>;
+ };
+ gpucore_cooling_map {
+ trip = <&control>;
+ cooling-device = <&gpucore_cool0 0 2>;
+ contribution = <1024>;
+ };
+ };
+ };
+ };
+
+ dwc3: dwc3@c9000000 {
+ compatible = "synopsys, dwc3";
+ reg = <0x0 0xc9000000 0x0 0x100000>;
+ interrupts = <0 30 4>;
+ usb-phy = <&usb2_phy>, <&usb3_phy>;
+ cpu-type = "gxl";
+ clock-src = "usb3.0";
+ };
+
+ usb2_phy: usb2phy@d0078000 {
+ compatible = "amlogic, amlogic-new-usb2";
+ portnum = <3>;
+ reg = <0x0 0xd0078000 0x0 0x80
+ 0x0 0xc1104408 0x0 0x4>;
+ };
+
+ usb3_phy: usb3phy@d0078080 {
+ compatible = "amlogic, amlogic-new-usb3";
+ portnum = <0>;
+ reg = <0x0 0xd0078080 0x0 0x20>;
+ };
+
+ dwc2_a {
+ compatible = "amlogic, dwc2";
+ device_name = "dwc2_a";
+ reg = <0x0 0xc9100000 0x0 0x40000>;
+ status = "okay";
+ interrupts = <0 31 4>;
+ pl-periph-id = <0>; /** lm name */
+ clock-src = "usb0"; /** clock src */
+ port-id = <0>; /** ref to mach/usb.h */
+ port-type = <2>; /** 0: otg, 1: host, 2: slave */
+ port-speed = <0>; /** 0: default, high, 1: full */
+ port-config = <0>; /** 0: default */
+ port-dma = <0>; /** 0: default ... 6: disable*/
+ port-id-mode = <0>; /** 0: hardware, 1: sw_host, 2: sw_slave*/
+ usb-fifo = <728>;
+ cpu-type = "gxl";
+ controller-type = <1>; /** 0: normal, 1: host, 2: device*/
+ phy-reg = <0xd0078000>;
+ phy-reg-size = <0xa0>;
+ clocks = <&clkc CLKID_USB_GENERAL
+ &clkc CLKID_USB1_TO_DDR
+ &clkc CLKID_USB1>;
+ clock-names = "usb_general",
+ "usb1",
+ "usb1_to_ddr";
+ };
+
+ meson-amvideom {
+ compatible = "amlogic, amvideom";
+ dev_name = "amvideom";
+ status = "okay";
+ interrupts = <0 3 1>;
+ interrupt-names = "vsync";
+ };
+
+ vout {
+ compatible = "amlogic, vout";
+ dev_name = "vout";
+ status = "okay";
+ fr_auto_policy = <0>;
+ };
+
+ vdac {
+ compatible = "amlogic, vdac";
+ dev_name = "vdac";
+ status = "okay";
+ };
+
+ cvbsout {
+ compatible = "amlogic, cvbsout-gxl";
+ dev_name = "cvbsout";
+ status = "disabled";
+ clocks = <&clkc CLKID_VCLK2_ENCI
+ &clkc CLKID_VCLK2_VENCI0
+ &clkc CLKID_VCLK2_VENCI1
+ &clkc CLKID_DAC_CLK>;
+ clock-names = "venci_top_gate",
+ "venci_0_gate",
+ "venci_1_gate",
+ "vdac_clk_gate";
+
+ /* performance: reg_address, reg_value */
+ /* s905x */
+ performance = <0x1bf0 0x9
+ 0x1b56 0x343
+ 0x1b12 0x8080
+ 0x1b05 0xfd
+ 0x1c59 0xf752
+ 0xffff 0x0>; /* ending flag */
+ };
+
+ amhdmitx: amhdmitx{
+ compatible = "amlogic, amhdmitx";
+ dev_name = "amhdmitx";
+ status = "okay";
+ vend-data = <&vend_data>;
+ pinctrl-names="hdmitx_hpd", "hdmitx_ddc";
+ pinctrl-0=<&hdmitx_hpd>;
+ pinctrl-1=<&hdmitx_ddc>;
+ /* HPD, 57 + 32 = 89; CEC, 151 + 32 = 183*/
+ interrupts = <0 57 1>;
+ interrupt-names = "hdmitx_hpd";
+ /* 0:M8B 1:GXBB 2:GXTVBB 3:GXL 4:GXM
+ * 5:TXL 6:TXLX 7:AXG 8:GXLX 9:TXHD
+ */
+ ic_type = <3>;
+ vend_data: vend_data{ /* Should modified by Customer */
+ vendor_name = "Amlogic"; /* Max Chars: 8 */
+ /* standards.ieee.org/develop/regauth/oui/oui.txt */
+ vendor_id = <0x000000>;
+ product_desc = "MBox Meson Ref"; /* Max Chars: 16 */
+ };
+ };
+
+ aocec: aocec{
+ compatible = "amlogic, amlogic-aocec";
+ device_name = "aocec";
+ status = "okay";
+ vendor_id = <0x000000>;
+ cec_osd_string = "MBox"; /* Max Chars: 14 */
+ cec_version = <5>; /* 5: 1.4, 6: 2.0 */
+ port_num = <1>;
+ arc_port_mask = <0x0>;
+ interrupts = <0 199 1>;
+ interrupt-names = "hdmi_aocec";
+ pinctrl-names = "default";
+ pinctrl-0=<&hdmitx_aocec>;
+ reg = <0x0 0xc810023c 0x0 0x4
+ 0x0 0xc8100000 0x0 0x200>;
+ };
+
+ sysled {
+ compatible = "amlogic, sysled";
+ dev_name = "sysled";
+ status = "disabled";
+ led_gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>;
+ led_active_low = <1>;
+ };
+
+ meson-fb {
+ compatible = "amlogic, meson-gxl";
+ memory-region = <&logo_reserved>;
+ dev_name = "meson-fb";
+ status = "okay";
+ interrupts = <0 3 1
+ 0 89 1>;
+ interrupt-names = "viu-vsync", "rdma";
+ mem_size = <0x00800000 0x01800000 0x00100000>;
+ /* uboot logo,fb0/fb1 memory size,if afbcd fb0=0x01851000*/
+ display_mode_default = "1080p60hz";
+ scale_mode = <1>;
+ /** 0:VPU free scale 1:OSD free scale 2:OSD super scale */
+ display_size_default = <1920 1080 1920 3240 32>;
+ /*1920*1080*4*3 = 0x17BB000*/
+ logo_addr = "0x7f800000";
+ };
+ ge2d {
+ compatible = "amlogic, ge2d-gxl";
+ dev_name = "ge2d";
+ status = "okay";
+ interrupts = <0 150 1>;
+ interrupt-names = "ge2d";
+ clocks = <&clkc CLKID_VAPB_MUX>,
+ <&clkc CLKID_G2D>,
+ <&clkc CLKID_GE2D_GATE>;
+ clock-names = "clk_vapb_0",
+ "clk_ge2d",
+ "clk_ge2d_gate";
+ };
+
+
+ /* AUDIO MESON DEVICES */
+ i2s_dai: I2S {
+ #sound-dai-cells = <0>;
+ compatible = "amlogic, aml-i2s-dai";
+ clocks =
+ <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_AMCLK_COMP>,
+ <&clkc CLKID_AIU_GLUE>,
+ <&clkc CLKID_IEC958>,
+ <&clkc CLKID_I2S_OUT>,
+ <&clkc CLKID_AMCLK>,
+ <&clkc CLKID_AIFIFO2>,
+ <&clkc CLKID_MIXER>,
+ <&clkc CLKID_MIXER_IFACE>,
+ <&clkc CLKID_ADC>,
+ <&clkc CLKID_AIU_TOP>,
+ <&clkc CLKID_AOCLK_GATE>,
+ <&clkc CLKID_I2S_SPDIF>;
+ clock-names =
+ "mpll",
+ "mclk",
+ "top_glue",
+ "aud_buf",
+ "i2s_out",
+ "amclk_measure",
+ "aififo2",
+ "aud_mixer",
+ "mixer_reg",
+ "adc",
+ "top_level",
+ "aoclk",
+ "aud_in";
+ i2s_pos_sync = <0>;
+ /*DMIC;*/ /* I2s Mic or Dmic, default for I2S mic */
+ };
+ dmic:snd_dmic {
+ #sound-dai-cells = <0>;
+ compatible = "aml, aml_snd_dmic";
+ reg = <0x0 0xd0042000 0x0 0x2000>;
+ status = "disabled";
+ resets = <
+ &clkc CLKID_PDM_GATE
+ >;
+ reset-names = "pdm";
+ pinctrl-names = "audio_dmic";
+ pinctrl-0 = <&aml_dmic_pins>;
+ clocks = <&clkc CLKID_PDM_COMP>,
+ <&clkc CLKID_AMCLK_COMP>;
+ clock-names = "pdm", "mclk";
+ };
+ spdif_dai: SPDIF {
+ #sound-dai-cells = <0>;
+ compatible = "amlogic, aml-spdif-dai";
+ clocks =
+ <&clkc CLKID_MPLL1>,
+ <&clkc CLKID_I958_COMP>,
+ <&clkc CLKID_AMCLK_COMP>,
+ <&clkc CLKID_I958_COMP_SPDIF>,
+ <&clkc CLKID_CLK81>,
+ <&clkc CLKID_IEC958>,
+ <&clkc CLKID_IEC958_GATE>;
+ clock-names =
+ "mpll1",
+ "i958",
+ "mclk",
+ "spdif",
+ "clk_81",
+ "iec958",
+ "iec958_amclk";
+ };
+ pcm_dai: PCM {
+ #sound-dai-cells = <0>;
+ compatible = "amlogic, aml-pcm-dai";
+ pinctrl-names = "audio_pcm";
+ pinctrl-0 = <&audio_pcm_pins>;
+ clocks =
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_PCM_MCLK_COMP>,
+ <&clkc CLKID_PCM_SCLK_GATE>;
+ clock-names =
+ "mpll0",
+ "pcm_mclk",
+ "pcm_sclk";
+ pcm_mode = <1>; /* 0=slave mode, 1=master mode */
+ };
+ i2s_plat: i2s_platform {
+ compatible = "amlogic, aml-i2s";
+ interrupts = <0 29 1>;
+ };
+ pcm_plat: pcm_platform {
+ compatible = "amlogic, aml-pcm";
+ };
+ spdif_codec: spdif_codec{
+ #sound-dai-cells = <0>;
+ compatible = "amlogic, aml-spdif-codec";
+ pinctrl-names = "audio_spdif";
+ pinctrl-0 = <&audio_spdif_pins>;
+ };
+ pcm_codec: pcm_codec{
+ #sound-dai-cells = <0>;
+ compatible = "amlogic, pcm2BT-codec";
+ };
+ /* endof AUDIO MESON DEVICES */
+
+ /* AUDIO board specific */
+ dummy_codec:dummy{
+ #sound-dai-cells = <0>;
+ compatible = "amlogic, aml_dummy_codec";
+ status = "okay";
+ };
+ amlogic_codec:t9015{
+ #sound-dai-cells = <0>;
+ compatible = "amlogic, aml_codec_T9015";
+ reg = <0x0 0xc8832000 0x0 0x14>;
+ status = "disabled";
+ };
+ aml_sound_meson {
+ compatible = "aml, meson-snd-card";
+ status = "okay";
+ aml-sound-card,format = "i2s";
+ aml_sound_card,name = "AML-MESONAUDIO";
+ aml,audio-routing =
+ "Ext Spk","LOUTL",
+ "Ext Spk","LOUTR";
+
+ mute_gpio-gpios = <&gpio GPIOH_5 0>;
+ mute_inv;
+ hp_disable;
+ hp_paraments = <800 300 0 5 1>;
+ pinctrl-names = "audio_i2s";
+ pinctrl-0 = <&audio_i2s_pins>;
+ cpu_list = <&cpudai0 &cpudai1 &cpudai2>;
+ codec_list = <&codec0 &codec1 &codec2>;
+ plat_list = <&i2s_plat &i2s_plat &pcm_plat>;
+ cpudai0: cpudai0 {
+ sound-dai = <&i2s_dai>;
+ };
+ cpudai1: cpudai1 {
+ sound-dai = <&spdif_dai>;
+ };
+ cpudai2: cpudai2 {
+ sound-dai = <&pcm_dai>;
+ };
+ codec0: codec0 {
+ sound-dai = <&dummy_codec>;
+ };
+ codec1: codec1 {
+ sound-dai = <&spdif_codec>;
+ };
+ codec2: codec2 {
+ sound-dai = <&pcm_codec>;
+ };
+ };
+ /* END OF AUDIO board specific */
+ rdma{
+ compatible = "amlogic, meson, rdma";
+ dev_name = "amlogic-rdma";
+ status = "ok";
+ interrupts = <0 89 1>;
+ interrupt-names = "rdma";
+ };
+
+ amvenc_avc{
+ compatible = "amlogic, amvenc_avc";
+ dev_name = "amvenc_avc";
+ status = "okay";
+ interrupts = <0 45 1>;
+ interrupt-names = "mailbox_2";
+ };
+
+ hevc_enc{
+ compatible = "cnm, HevcEnc";
+ dev_name = "HevcEnc";
+ status = "okay";
+ interrupts = <0 187 1>;
+ interrupt-names = "wave420l_irq";
+ #address-cells=<2>;
+ #size-cells=<2>;
+ ranges;
+ io_reg_base{
+ reg = <0x0 0xc8810000 0x0 0x4000>;
+ };
+ };
+
+ picdec {
+ compatible = "amlogic, picdec";
+ memory-region = <&picdec_cma_reserved>;
+ dev_name = "picdec";
+ status = "okay";
+ };
+
+ ppmgr {
+ compatible = "amlogic, ppmgr";
+ memory-region = <&ppmgr_reserved>;
+ dev_name = "ppmgr";
+ status = "okay";
+ };
+
+ deinterlace {
+ compatible = "amlogic, deinterlace";
+ status = "okay";
+ flag_cma = <1>;/*0:use reserved;1:use cma*/
+ //memory-region = <&di_reserved>;
+ memory-region = <&di_cma_reserved>;
+ interrupts = <0 46 1 0 6 1>;
+ interrupt-names = "de_irq", "timerc";
+ /*
+ * nr_size(byte) = 1920*544*2(yuv422 8bit) |
+ * 1920*544*2*12/8(yuv422 10bit)
+ * | 1920*544*2*10/8(yuv422 10bit full pack mode)
+ */
+ /* mtn_size(byte) = 1920*544/2 */
+ /* count_size(byte) = 1920*544/2 */
+ buffer-size = <3133440>;
+ hw-version = <2>;
+ };
+
+ ionvideo {
+ compatible = "amlogic, ionvideo";
+ dev_name = "ionvideo";
+ status = "okay";
+ };
+
+ amlvideo {
+ compatible = "amlogic, amlvideo";
+ dev_name = "amlvideo";
+ status = "okay";
+ };
+
+ amlvideo2_0 {
+ compatible = "amlogic, amlvideo2";
+ dev_name = "amlvideo2";
+ status = "okay";
+ amlvideo2_id = <0>;
+ cma_mode = <1>;
+ };
+
+ amlvideo2_1 {
+ compatible = "amlogic, amlvideo2";
+ dev_name = "amlvideo2";
+ status = "okay";
+ amlvideo2_id = <1>;
+ cma_mode = <1>;
+ };
+
+ /*if you want to use vdin just modify status to "ok"*/
+ vdin0 {
+ compatible = "amlogic, vdin";
+ /*memory-region = <&vdin0_cma_reserved>;*/
+ dev_name = "vdin0";
+ status = "ok";
+ reserve-iomap = "true";
+ flag_cma = <1>;/*1:share with codec_mm;2:cma alone*/
+ /*MByte, if 10bit disable: 64M(YUV422),
+ *if 10bit enable: 64*1.5 = 96M(YUV422)
+ *if support 4K2K-YUV444-10bit-WR:3840*2160*4*4 ~= 128M
+ *if support 4K2K-YUV422-10bit-wr:3840*2160*3*4 ~= 96M
+ *if support 4K2K-YUV422-8BIT-WR:3840*2160*2*4 ~= 64M
+ *if support 1080p-YUV422-8BIT-WR:1920*1080*2*4 ~= 16M
+ */
+ cma_size = <16>;
+ interrupts = <0 83 1>;
+ rdma-irq = <2>;
+ /*clocks = <&clock CLK_FPLL_DIV5>,
+ * <&clock CLK_VDIN_MEAS_CLK>;
+ *clock-names = "fclk_div5", "cts_vdin_meas_clk";
+ */
+ vdin_id = <0>;
+ /*vdin write mem color depth support:
+ *bit0:support 8bit
+ *bit1:support 9bit
+ *bit2:support 10bit
+ *bit3:support 12bit
+ *bit4:support yuv422 10bit full pack mode (from txl new add)
+ */
+ tv_bit_mode = <1>;
+ };
+ vdin1 {
+ compatible = "amlogic, vdin";
+ memory-region = <&vdin1_cma_reserved>;
+ dev_name = "vdin1";
+ status = "ok";
+ reserve-iomap = "true";
+ flag_cma = <0>;/*1:share with codec_mm;0:cma alone*/
+ interrupts = <0 85 1>;
+ rdma-irq = <4>;
+ /*clocks = <&clock CLK_FPLL_DIV5>,
+ * <&clock CLK_VDIN_MEAS_CLK>;
+ *clock-names = "fclk_div5", "cts_vdin_meas_clk";
+ */
+ vdin_id = <1>;
+ /*vdin write mem color depth support:
+ *bit0:support 8bit
+ *bit1:support 9bit
+ *bit2:support 10bit
+ *bit3:support 12bit
+ */
+ tv_bit_mode = <1>;
+ };
+
+ amlvecm {
+ compatible = "amlogic, vecm";
+ dev_name = "aml_vecm";
+ status = "okay";
+ gamma_en = <0>;/*1:enabel ;0:disable*/
+ wb_en = <0>;/*1:enabel ;0:disable*/
+ cm_en = <0>;/*1:enabel ;0:disable*/
+ };
+
+ unifykey{
+ compatible = "amlogic, unifykey";
+ status = "ok";
+
+ unifykey-num = <16>;
+ unifykey-index-0 = <&keysn_0>;
+ unifykey-index-1 = <&keysn_1>;
+ unifykey-index-2 = <&keysn_2>;
+ unifykey-index-3 = <&keysn_3>;
+ unifykey-index-4 = <&keysn_4>;
+ unifykey-index-5 = <&keysn_5>;
+ unifykey-index-6 = <&keysn_6>;
+ unifykey-index-7 = <&keysn_7>;
+ unifykey-index-8 = <&keysn_8>;
+ unifykey-index-9 = <&keysn_9>;
+ unifykey-index-10= <&keysn_10>;
+ unifykey-index-11= <&keysn_11>;
+ unifykey-index-12= <&keysn_12>;
+ unifykey-index-13= <&keysn_13>;
+ unifykey-index-14= <&keysn_14>;
+ unifykey-index-15= <&keysn_15>;
+
+ keysn_0: key_0{
+ key-name = "usid";
+ key-device = "normal";
+ key-permit = "read","write","del";
+ };
+ keysn_1:key_1{
+ key-name = "mac";
+ key-device = "normal";
+ key-permit = "read","write","del";
+ };
+ keysn_2:key_2{
+ key-name = "hdcp";
+ key-device = "secure";
+ key-type = "sha1";
+ key-permit = "read","write","del";
+ };
+ keysn_3:key_3{
+ key-name = "secure_boot_set";
+ key-device = "efuse";
+ key-permit = "write";
+ };
+ keysn_4:key_4{
+ key-name = "mac_bt";
+ key-device = "normal";
+ key-permit = "read","write","del";
+ key-type = "mac";
+ };
+ keysn_5:key_5{
+ key-name = "mac_wifi";
+ key-device = "normal";
+ key-permit = "read","write","del";
+ key-type = "mac";
+ };
+ keysn_6:key_6{
+ key-name = "hdcp2_tx";
+ key-device = "normal";
+ key-permit = "read","write","del";
+ };
+ keysn_7:key_7{
+ key-name = "hdcp2_rx";
+ key-device = "normal";
+ key-permit = "read","write","del";
+ };
+ keysn_8:key_8{
+ key-name = "widevinekeybox";
+ key-device = "secure";
+ key-permit = "read","write","del";
+ };
+ keysn_9:key_9{
+ key-name = "deviceid";
+ key-device = "normal";
+ key-permit = "read","write","del";
+ };
+ keysn_10:key_10{
+ key-name = "hdcp22_fw_private";
+ key-device = "secure";
+ key-permit = "read","write","del";
+ };
+ keysn_11:key_11{
+ key-name = "PlayReadykeybox25";
+ key-device = "secure";
+ key-permit = "read","write","del";
+ };
+ keysn_12:key_12{
+ key-name = "prpubkeybox";// PlayReady
+ key-device = "secure";
+ key-permit = "read","write","del";
+ };
+ keysn_13:key_13{
+ key-name = "prprivkeybox";// PlayReady
+ key-device = "secure";
+ key-permit = "read","write","del";
+ };
+ keysn_14:key_14{
+ key-name = "attestationkeybox";// attestation key
+ key-device = "secure";
+ key-permit = "read","write","del";
+ };
+ keysn_15: key_15{
+ key-name = "region_code";
+ key-device = "normal";
+ key-permit = "read","write","del";
+ };
+ };//End unifykey
+};
+&efuse {
+ status = "ok";
+};
+
+&pwm_ef {
+ status = "okay";
+};
+
+&audio_data{
+ status = "okay";
+};
--- /dev/null
+/*
+ * arch/arm64/boot/dts/amlogic/mesongxl.dtsi
+ *
+ * Copyright (C) 2017 Amlogic, Inc. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/amlogic,gxl-reset.h>
+#include <dt-bindings/clock/amlogic,gxl-clkc.h>
+#include <dt-bindings/iio/adc/amlogic-saradc.h>
+#include <dt-bindings/gpio/gxl.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/meson_rc.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/pwm/meson.h>
+#include "mesongxbb-gpu-mali450.dtsi"
+/ {
+ cpus:cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0:cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+ core1 {
+ cpu = <&CPU1>;
+ };
+ core2 {
+ cpu = <&CPU2>;
+ };
+ core3 {
+ cpu = <&CPU3>;
+ };
+ };
+ };
+ CPU0:cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ clocks = <&scpi_dvfs 0>;
+ clock-names = "cpu-cluster.0";
+ cpu-idle-states = <&SYSTEM_SLEEP_0>;
+ /*cpu-idle-states = <&CPU_SLEEP_0 &SYSTEM_SLEEP_0>;*/
+ };
+
+ CPU1:cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ clocks = <&scpi_dvfs 0>;
+ clock-names = "cpu-cluster.0";
+ cpu-idle-states = <&SYSTEM_SLEEP_0>;
+ /*cpu-idle-states = <&CPU_SLEEP_0 &SYSTEM_SLEEP_0>;*/
+ };
+ CPU2:cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ clocks = <&scpi_dvfs 0>;
+ clock-names = "cpu-cluster.0";
+ cpu-idle-states = <&SYSTEM_SLEEP_0>;
+ /*cpu-idle-states = <&CPU_SLEEP_0 &SYSTEM_SLEEP_0>;*/
+ };
+
+ CPU3:cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ clocks = <&scpi_dvfs 0>;
+ clock-names = "cpu-cluster.0";
+ cpu-idle-states = <&SYSTEM_SLEEP_0>;
+ /*cpu-idle-states = <&CPU_SLEEP_0 &SYSTEM_SLEEP_0>;*/
+ };
+
+
+ idle-states {
+ entry-method = "arm,psci";
+/*
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x0010000>;
+ local-timer-stop;
+ entry-latency-us = <3000>;
+ exit-latency-us = <3000>;
+ min-residency-us = <8000>;
+ };
+*/
+ SYSTEM_SLEEP_0: system-sleep-0 {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x0010000>;
+ local-timer-stop;
+ entry-latency-us = <0x3fffffff>;
+ exit-latency-us = <0x40000000>;
+ min-residency-us = <0xffffffff>;
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 0xff08>,
+ <GIC_PPI 14 0xff08>,
+ <GIC_PPI 11 0xff08>,
+ <GIC_PPI 10 0xff08>;
+ };
+ timer_bc {
+ compatible = "arm, meson-bc-timer";
+ reg= <0x0 0xc1109990 0x0 0x4 0x0 0xc1109994 0x0 0x4>;
+ timer_name = "Meson TimerF";
+ clockevent-rating=<300>;
+ clockevent-shift=<20>;
+ clockevent-features=<0x23>;
+ interrupts = <0 60 1>;
+ bit_enable=<16>;
+ bit_mode=<12>;
+ bit_resolution=<0>;
+ };
+ arm_pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <0 137 4>,
+ <0 138 4>,
+ <0 153 4>,
+ <0 154 4>;
+ };
+
+ gic: interrupt-controller@2c001000 {
+ compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x0 0xc4301000 0 0x1000>,
+ <0x0 0xc4302000 0 0x0100>;
+ interrupts = <GIC_PPI 9 0xf04>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ meson_suspend:pm{
+ compatible = "amlogic, pm";
+ device_name = "aml_pm";
+ reg = <0x0 0xc81000a8 0x0 0x4
+ 0x0 0xc810023c 0x0 0x4>;
+ };
+
+ secmon {
+ compatible = "amlogic, secmon";
+ memory-region = <&secmon_reserved>;
+ in_base_func = <0x82000020>;
+ out_base_func = <0x82000021>;
+ reserve_mem_size = <0x00300000>;
+ };
+
+ securitykey {
+ compatible = "aml, securitykey";
+ storage_query = <0x82000060>;
+ storage_read = <0x82000061>;
+ storage_write = <0x82000062>;
+ storage_tell = <0x82000063>;
+ storage_verify = <0x82000064>;
+ storage_status = <0x82000065>;
+ storage_list = <0x82000067>;
+ storage_remove = <0x82000068>;
+ storage_in_func = <0x82000023>;
+ storage_out_func = <0x82000024>;
+ storage_block_func = <0x82000025>;
+ storage_size_func = <0x82000027>;
+ storage_set_enctype = <0x8200006A>;
+ storage_get_enctype = <0x8200006B>;
+ storage_version = <0x8200006C>;
+ };
+
+ cpu_iomap{
+ compatible = "amlogic, iomap";
+ #address-cells=<2>;
+ #size-cells=<2>;
+ ranges;
+ io_cbus_base{
+ reg = <0x0 0xc1100000 0x0 0x100000>;
+ };
+ io_apb_base{
+ reg = <0x0 0xd0050000 0x0 0x50000>;
+ };
+ io_aobus_base{
+ reg = <0x0 0xc8100000 0x0 0x100000>;
+ };
+ io_vapb_base{
+ reg = <0x0 0xd0100000 0x0 0x100000>;
+ };
+ io_hiu_base{
+ reg = <0x0 0xc883c000 0x0 0x2000>;
+ };
+ };
+
+ cpu_info{
+ compatible = "amlogic, cpuinfo";
+ cpuinfo_cmd = <0x82000044>;
+ status = "okay";
+ };
+
+ watchdog {
+ compatible = "amlogic, meson-wdt";
+ status = "disabled";
+ default_timeout=<10>;
+ reset_watchdog_method=<1>; /* 0:sysfs,1:kernel */
+ reset_watchdog_time=<2>;
+ shutdown_timeout=<10>;
+ firmware_timeout=<6>;
+ suspend_timeout=<6>;
+ reg = <0x0 0xc11098d0 0x0 0x10>;
+ clock-names = "xtal";
+ clocks = <&xtal>;
+ };
+
+ jtag {
+ compatible = "amlogic, jtag";
+ status = "okay";
+ select = "apao"; /* disable/apao/apee */
+ jtagao-gpios = <&gpio GPIOH_6 0
+ &gpio GPIOH_7 0
+ &gpio GPIOH_8 0
+ &gpio GPIOH_9 0>;
+ jtagee-gpios = <&gpio CARD_0 0
+ &gpio CARD_1 0
+ &gpio CARD_2 0
+ &gpio CARD_3 0>;
+ };
+
+ mailbox: mhu@c883c400 {
+ compatible = "amlogic, meson_mhu";
+ reg = <0x0 0xc883c400 0x0 0x4c>, /* MHU registers */
+ <0x0 0xc8013000 0x0 0x800>; /* Payload area */
+ interrupts = <0 209 1>, /* low priority interrupt */
+ <0 210 1>; /* high priority interrupt */
+ #mbox-cells = <1>;
+ mbox-names = "cpu_to_scp_low", "cpu_to_scp_high";
+ mboxes = <&mailbox 0 &mailbox 1>;
+ };
+
+ scpi_clocks {
+ compatible = "arm, scpi-clks";
+
+ scpi_dvfs: scpi_clocks@0 {
+ compatible = "arm, scpi-clk-indexed";
+ #clock-cells = <1>;
+ clock-indices = <0>;
+ clock-output-names = "vcpu";
+ };
+
+ };
+
+ xtal: xtal-clk {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "xtal";
+ #clock-cells = <0>;
+ };
+
+ vpu {
+ compatible = "amlogic, vpu-gxl";
+ dev_name = "vpu";
+ status = "okay";
+ clocks = <&clkc CLKID_VAPB_MUX>,
+ <&clkc CLKID_VPU_INTR>,
+ <&clkc CLKID_GP0_PLL>,
+ <&clkc CLKID_VPU_P0_COMP>,
+ <&clkc CLKID_VPU_P1_COMP>,
+ <&clkc CLKID_VPU_MUX>;
+ clock-names = "vapb_clk",
+ "vpu_intr",
+ "gp_pll",
+ "vpu_clk0",
+ "vpu_clk1",
+ "vpu_clk";
+ clk_level = <7>;
+ /* 0: 100.0M 1: 166.7M 2: 200.0M 3: 250.0M */
+ /* 4: 333.3M 5: 400.0M 6: 500.0M 7: 666.7M */
+ };
+
+ spicc:@c1108d80{
+ compatible = "amlogic, spicc";
+ status = "disabled";
+ reg = <0x0 0xc1108d80 0x0 0x28>;
+ clocks = <&clkc CLKID_SPICC>;
+ clock-names = "spicc_clk";
+ interrupts = <0 81 1>;
+ device_id = <0>;
+ };
+
+ uart_AO: serial@c81004c0 {
+ compatible = "amlogic, meson-uart";
+ reg = <0x0 0xc81004c0 0x0 0x18>;
+ interrupts = <0 193 1>;
+ status = "okay";
+ clocks = <&xtal>;
+ clock-names = "clk_uart";
+ xtal_tick_en = <1>;
+ fifosize = < 64 >;
+ pinctrl-names = "default";
+ /*pinctrl-0 = <&ao_uart_pins>;*/
+ support-sysrq = <0>; /* 0 not support , 1 support */
+ };
+
+ uart_A: serial@c11084c0 {
+ compatible = "amlogic, meson-uart";
+ reg = <0x0 0xc11084c0 0x0 0x18>;
+ interrupts = <0 26 1>;
+ status = "okay";
+ clocks = <&clkc CLKID_UART0>;
+ clock-names = "clk_uart";
+ fifosize = < 128 >;
+ pinctrl-names = "default";
+ pinctrl-0 = <&a_uart_pins>;
+ };
+
+ uart_B: serial@c11084dc {
+ compatible = "amlogic, meson-uart";
+ reg = <0x0 0xc11084dc 0x0 0x18>;
+ interrupts = <0 75 1>;
+ status = "disabled";
+ clocks = <&clkc CLKID_UART1>;
+ clock-names = "clk_uart";
+ fifosize = < 64 >;
+ pinctrl-names = "default";
+ pinctrl-0 = <&b_uart_pins>;
+ };
+
+ uart_C: serial@c1108700 {
+ compatible = "amlogic, meson-uart";
+ reg = <0x0 0xc1108700 0x0 0x18>;
+ interrupts = <0 93 1>;
+ status = "disabled";
+ clocks = <&clkc CLKID_UART2>;
+ clock-names = "clk_uart";
+ fifosize = < 64 >;
+ pinctrl-names = "default";
+ pinctrl-0 = <&c_uart_pins>;
+ };
+
+ uart_AO_B: serial@c81004e0 {
+ compatible = "amlogic, meson-uart";
+ reg = <0x0 0xc81004e0 0x0 0x18>;
+ interrupts = <0 197 1>;
+ status = "disable";
+ clocks = <&xtal>;
+ clock-names = "clk_uart";
+ fifosize = < 64 >;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ao_b_uart_pins>;
+ };
+
+ pinctrl_aobus: pinctrl@14 {
+ compatible = "amlogic,meson-gxl-aobus-pinctrl";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gpio_ao: bank@14 {
+ reg = <0x0 0xc8100014 0x0 0x8>,
+ <0x0 0xc810002c 0x0 0x4>,
+ <0x0 0xc8100024 0x0 0x8>;
+ reg-names = "mux", "pull", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+ pinctrl_periphs: pinctrl@4b0 {
+ compatible = "amlogic,meson-gxl-periphs-pinctrl";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gpio: bank@4b0 {
+ reg = <0x0 0xc88344b0 0x0 0x28>,
+ <0x0 0xc88344e8 0x0 0x14>,
+ <0x0 0xc8834520 0x0 0x14>,
+ <0x0 0xc8834430 0x0 0x40>;
+ reg-names = "mux", "pull",
+ "pull-enable", "gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ cbus: cbus@c1100000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xc1100000 0x0 0x100000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xc1100000 0x0 0x100000>;
+
+ gpio_intc: interrupt-controller@9880 {
+ compatible = "amlogic,meson-gpio-intc",
+ "amlogic,meson-gxl-gpio-intc";
+ reg = <0x0 0x9880 0x0 0x10>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ amlogic,channel-interrupts =
+ <64 65 66 67 68 69 70 71>;
+ status = "okay";
+ };
+
+ meson_clk_msr{
+ compatible = "amlogic, gxl_measure";
+ reg = <0x0 0x875c 0x0 0x4
+ 0x0 0x8764 0x0 0x4>;
+ };
+
+ /*i2c-A*/
+ i2c0: i2c@8500 {
+ compatible = "amlogic,meson-gx-i2c";
+ status = "disabled";
+ reg = <0x0 0x8500 0x0 0x20>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc CLKID_I2C>;
+ clock-names = "clk_i2c";
+ };
+
+ /*i2c-B*/
+ i2c1: i2c@87c0 {
+ compatible = "amlogic,meson-gx-i2c";
+ status = "disabled";
+ reg = <0x0 0x87c0 0x0 0x20>;
+ interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 48 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc CLKID_I2C>;
+ clock-names = "clk_i2c";
+ };
+
+ /*i2c-C*/
+ i2c2: i2c@87e0 {
+ compatible = "amlogic,meson-gx-i2c";
+ status = "disabled";
+ reg = <0x0 0x87e0 0x0 0x20>;
+ interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 49 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc CLKID_I2C>;
+ clock-names = "clk_i2c";
+ };
+
+ /*i2c-D*/
+ i2c3: i2c@8d20 {
+ compatible = "amlogic,meson-gx-i2c";
+ status = "disabled";
+ reg = <0x0 0x8d20 0x0 0x20>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc CLKID_I2C>;
+ clock-names = "clk_i2c";
+ };
+ };
+
+ aobus: aobus@c8100000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xc8100000 0x0 0x100000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>;
+
+ cpu_version{
+ reg=<0x0 0x0220 0x0 0x4>;
+ };
+
+ i2c_AO: i2c@0500 {
+ compatible = "amlogic,meson-gx-i2c";
+ status = "disabled";
+ reg = <0x0 0x0500 0x0 0x20>;
+ interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clkc CLKID_I2C>;
+ clock-names = "clk_i2c";
+ };
+ };
+
+ periphs: periphs@c8834000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xc8834000 0x0 0x2000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xc8834000 0x0 0x2000>;
+ };
+
+ hiubus: hiubus@c883c000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xc883c000 0x0 0x2000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xc883c000 0x0 0x2000>;
+
+ clkc: clock-controller@0 {
+ compatible = "amlogic,gxl-clkc";
+ #clock-cells = <1>;
+ reg = <0x0 0x0 0x0 0x3db>;
+ };
+ };
+
+ apb: apb@d0000000 {
+ compatible = "simple-bus";
+ reg = <0x0 0xd0000000 0x0 0x200000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges = <0x0 0x0 0x0 0xd0000000 0x0 0x200000>;
+ };
+ }; /* end of soc */
+}; /* end of root */
+
+&pinctrl_aobus {
+ remote_pins:remote_pin {
+ mux {
+ groups = "remote_input";
+ function = "remote";
+ };
+ };
+
+ sd_to_ao_uart_clr_pins:sd_to_ao_uart_clr_pins {
+ mux {
+ groups = "GPIOAO_0",
+ "GPIOAO_1";
+ function = "gpio_aobus";
+ };
+ };
+
+ sd_to_ao_uart_pins:sd_to_ao_uart_pins {
+ mux {
+ groups = "uart_tx_ao_a_0",
+ "uart_rx_ao_a_0";
+ function = "uart_ao";
+ bias-pull-up;
+ input-enable;
+ };
+ };
+
+ ao_uart_pins:ao_uart {
+ mux {
+ groups = "uart_tx_ao_a_0",
+ "uart_rx_ao_a_0";
+ function = "uart_ao";
+ };
+ };
+
+ ao_b_uart_pins:ao_b_uart {
+ mux {
+ groups = "uart_tx_ao_b_0",
+ "uart_rx_ao_b_0";
+ function = "uart_ao_b";
+ };
+ };
+ ao_i2c_master:ao_i2c{
+ mux {
+ groups = "i2c_sda_ao",
+ "i2c_sck_ao";
+ function = "i2c_ao";
+ };
+ };
+
+ hdmitx_aocec: hdmitx_aocec {
+ mux {
+ groups = "ao_cec";
+ function = "ao_cec";
+ };
+ };
+
+ hdmitx_eecec: hdmitx_eecec {
+ mux {
+ groups = "ee_cec";
+ function = "ee_cec";
+ };
+ };
+}; /* end of pinctrl_aobus*/
+
+&pinctrl_periphs {
+ external_eth_pins:external_eth_pins {
+ mux {
+ groups = "eth_mdio",
+ "eth_mdc",
+ "eth_clk_rx_clk",
+ "eth_rx_dv",
+ "eth_rxd0",
+ "eth_rxd1",
+ "eth_rxd2",
+ "eth_rxd3",
+ "eth_rgmii_tx_clk",
+ "eth_tx_en",
+ "eth_txd0",
+ "eth_txd1",
+ "eth_txd2",
+ "eth_txd3";
+ function = "eth";
+ };
+ };
+
+ jtag_apao_pins:jtag_apao_pin {
+ mux {
+ groups = "jtag_tdi_0",
+ "jtag_tdo_0",
+ "jtag_clk_0",
+ "jtag_tms_0";
+ function = "jtag";
+ };
+ };
+
+ jtag_apee_pins:jtag_apee_pin {
+ mux {
+ groups ="jtag_tdi_1",
+ "jtag_tdo_1",
+ "jtag_clk_1",
+ "jtag_tms_1";
+ function = "jtag";
+ };
+ };
+
+ a_uart_pins:a_uart {
+ mux {
+ groups = "uart_tx_a",
+ "uart_rx_a",
+ "uart_rts_a";
+ function = "uart_a";
+ };
+ };
+
+ b_uart_pins:b_uart {
+ mux {
+ groups = "uart_tx_b",
+ "uart_rx_b",
+ "uart_cts_b",
+ "uart_rts_b";
+ function = "uart_b";
+ };
+ };
+
+ c_uart_pins:c_uart {
+ mux {
+ groups = "uart_tx_c",
+ "uart_rx_c",
+ "uart_cts_c",
+ "uart_rts_c";
+ function = "uart_c";
+ };
+ };
+
+ wifi_32k_pins:wifi_32k_pins {
+ mux {
+ groups ="pwm_e";
+ function = "pwm_e";
+ };
+ };
+
+/*
+* sd_clk_cmd_pins:sd_clk_cmd_pins{
+* };
+* sd_all_pins:sd_all_pins {
+* };
+* sd_1bit_uart_pins:sd_1bit_uart_pins{
+* };
+* sd_clk_cmd_uart_pins:sd_clk_cmd_uart_pins {
+* };
+* sd_to_ao_jtag_pins:sd_to_ao_jtag_pins{
+* };
+*/
+ ao_to_sd_uart_clr_pins:ao_to_sd_uart_clr_pins {
+ mux {
+ groups = "sdcard_d2",
+ "sdcard_d3";
+ function = "sdcard";
+ input-enable;
+ bias-pull-up;
+ };
+ };
+
+ sd_1bit_pins:sd_1bit_pins {
+ mux {
+ groups = "sdcard_d0",
+ "sdcard_cmd",
+ "sdcard_clk";
+ function = "sdcard";
+ input-enable;
+ bias-pull-up;
+ };
+ };
+
+ ao_to_sd_uart_pins:ao_to_sd_uart_pins {
+ mux {
+ groups = "uart_tx_ao_a_card4",
+ "uart_rx_ao_a_card5";
+ function = "uart_ao_a_card";
+ bias-pull-up;
+ input-enable;
+ };
+ };
+
+ emmc_clk_cmd_pins:emmc_clk_cmd_pins {
+ mux {
+ groups = "emmc_cmd",
+ "emmc_clk";
+ function = "emmc";
+ input-enable;
+ bias-pull-up;
+ };
+ };
+
+
+ emmc_conf_pull_up:emmc_conf_pull_up {
+ mux {
+ groups = "emmc_nand_d07",
+ "emmc_clk",
+ "emmc_cmd";
+ function = "emmc";
+ input-enable;
+ bias-pull-up;
+ };
+ };
+
+ emmc_conf_pull_done:emmc_conf_pull_done {
+ mux {
+ groups = "emmc_ds";
+ function = "emmc";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+
+ sd_clk_cmd_pins:sd_clk_cmd_pins{
+ mux {
+ groups = "sdcard_cmd",
+ "sdcard_clk";
+ function = "sdcard";
+ input-enable;
+ bias-pull-up;
+ };
+ };
+
+ sd_all_pins:sd_all_pins{
+ mux {
+ groups = "sdcard_d0",
+ "sdcard_d1",
+ "sdcard_d2",
+ "sdcard_d3",
+ "sdcard_cmd",
+ "sdcard_clk";
+ function = "sdcard";
+ input-enable;
+ bias-pull-up;
+ };
+ };
+
+ sdio_clk_cmd_pins:sdio_clk_cmd_pins {
+ mux {
+ groups = "sdio_clk",
+ "sdio_cmd";
+ function = "sdio";
+ input-enable;
+ bias-pull-up;
+ };
+ };
+
+ sdio_all_pins:sdio_all_pins {
+ mux {
+ groups = "sdio_d0",
+ "sdio_d1",
+ "sdio_d2",
+ "sdio_d3",
+ "sdio_clk",
+ "sdio_cmd";
+ function = "sdio";
+ input-enable;
+ bias-pull-up;
+ };
+ };
+
+ nand_pulldown: nand_pulldown {
+ mux {
+ groups = "emmc_nand_d07",
+ "emmc_ds";
+ function = "emmc";
+ bias-pull-down;
+ };
+ };
+
+ nand_pullup: nand_pullup {
+ mux {
+ groups = "emmc_clk",
+ "emmc_cmd";
+ function = "emmc";
+ bias-pull-up;
+ };
+ };
+
+ all_nand_pins: all_nand_pins {
+ mux {
+ groups = "emmc_nand_d07",
+ "nand_ce0",
+ "nand_ce1",
+ "nand_rb0",
+ "nand_ale",
+ "nand_cle",
+ "nand_wen_clk",
+ "nand_ren_wr",
+ "nand_dqs";
+ function = "nand";
+ input-enable;
+ };
+ };
+
+ nand_cs_pins: nand_cs {
+ mux {
+ groups = "nand_ce0",
+ "nand_ce1";
+ function = "nand";
+ };
+ };
+
+ hdmitx_hpd: hdmitx_hpd {
+ mux {
+ groups = "hdmi_hpd";
+ function = "hdmi_hpd";
+ };
+ };
+
+ hdmitx_ddc: hdmitx_ddc {
+ mux {
+ groups = "hdmi_sda",
+ "hdmi_scl";
+ function = "hdmi_ddc";
+ };
+ };
+
+ a_i2c_master:a_i2c {
+ mux {
+ groups = "i2c_sda_a",
+ "i2c_scl_a";
+ function = "i2c_a";
+ };
+ };
+
+ b_i2c_master:b_i2c {
+ mux {
+ groups = "i2c_sda_b",
+ "i2c_scl_b";
+ function = "i2c_b";
+ };
+ };
+
+ /* c_i2c_master: dv28 dv29 */
+ /* c_i2c_master_pin1: dv18 dv19 */
+ c_i2c_master:c_i2c {
+ mux {
+ groups = "i2c_sda_c_dv28",
+ "i2c_scl_c_dv29";
+ function = "i2c_c";
+ };
+ };
+ c_i2c_master_pin1:c_i2c_pin1{
+ mux {
+ groups = "i2c_sda_c_dv18",
+ "i2c_scl_c_dv19";
+ function = "i2c_c";
+ };
+ };
+
+ d_i2c_master:d_i2c {
+ mux {
+ groups = "i2c_sda_d",
+ "i2c_scl_d";
+ function = "i2c_d";
+ };
+ };
+
+ spicc_pulldown_z11z12z13: spicc_pulldown_z11z12z13 {
+ mux {
+ groups = "spi_sclk_0",
+ "spi_miso_0",
+ "spi_mosi_0";
+ function = "spi";
+ };
+ };
+
+ spicc_pullup_z11z12z13: spicc_pullup_z11z12z13 {
+ mux {
+ groups = "spi_sclk_0",
+ "spi_miso_0",
+ "spi_mosi_0";
+ function = "spi";
+ };
+ };
+
+ spicc_pulldown_x8x9x11: spicc_pulldown_x8x9x11 {
+ mux {
+ groups = "spi_sclk_1",
+ "spi_miso_1",
+ "spi_mosi_1";
+ function = "spi";
+ bias-pull-down;
+ };
+ };
+
+ spicc_pullup_x8x9x11: spicc_pullup_x8x9x11 {
+ mux {
+ groups = "spi_sclk_1",
+ "spi_miso_1",
+ "spi_mosi_1";
+ function = "spi";
+ bias-pull-up;
+ };
+ };
+
+ audio_i2s_pins:audio_i2s {
+ mux {
+ groups = "i2s_am_clk",
+ "i2s_ao_clk_out",
+ "i2s_lr_clk_out",
+ "i2sout_ch01";
+ function = "i2s";
+ };
+ };
+
+ audio_spdif_pins:audio_spdif {
+ mux {
+ groups = "spdif_out";
+ function = "spdif_out";
+ };
+ };
+
+ audio_spdif_in_pins:audio_spdif_in {
+ mux {
+ groups = "spdif_in_z14";
+ function = "spdif_in";
+ };
+ };
+
+ audio_spdif_in_1_pins:audio_spdif_in_1 {
+ mux {
+ groups = "spdif_in_h4";
+ function = "spdif_in";
+ };
+ };
+
+ audio_pcm_pins:audio_pcm {
+ mux {
+ groups = "pcm_out_a",
+ "pcm_in_a",
+ "pcm_fs_a",
+ "pcm_clk_a";
+ function = "pcm_a";
+ };
+ };
+ aml_dmic_pins:audio_dmic {
+ mux {
+ groups = "dmic_in_dv24",
+ "dmic_clk_dv25";
+ function = "dmic";
+ };
+ };
+ dvb_p_ts0_pins: dvb_p_ts0_pins {
+ tsin_a {
+ groups = "tsin_sop_a_dv9",
+ "tsin_d_valid_a_dv10",
+ "tsin_d0_a_dv0",
+ "tsin_d1_7_a_dv1_7",
+ "tsin_clk_a_dv8";
+ function = "tsin_a";
+ };
+ };
+ dvb_s_ts0_pins: dvb_s_ts0_pins {
+ tsin_a {
+ groups = "tsin_sop_a_dv9",
+ "tsin_d_valid_a_dv10",
+ "tsin_clk_a_dv8",
+ "tsin_d0_a_dv0";
+ function = "tsin_a";
+ };
+ };
+
+}; /* end of pinctrl_periphs */
+
+&periphs {
+ rng {
+ compatible = "amlogic,meson-rng";
+ reg = <0x0 0x0 0x0 0x4>;
+ };
+};
+
+&cbus{
+ reset: reset-controller@4404 {
+ compatible = "amlogic,reset";
+ reg = <0x0 0x04404 0x0 0x20>;
+ #reset-cells = <1>;
+ };
+};
+
+/{
+ aml_dma {
+ compatible = "amlogic,aml_gxl_dma";
+ reg = <0x0 0xc883e000 0x0 0x28>;
+ interrupts = <0 188 1>;
+
+ aml_aes {
+ compatible = "amlogic,aes_dma";
+ dev_name = "aml_aes_dma";
+ status = "okay";
+ };
+
+ aml_tdes {
+ compatible = "amlogic,des_dma,tdes_dma";
+ dev_name = "aml_tdes_dma";
+ status = "okay";
+ };
+ };
+
+ audio_data:audio_data {
+ compatible = "amlogic, audio_data";
+ query_licence_cmd = <0x82000050>;
+ status = "disabled";
+ };
+
+ saradc: saradc {
+ compatible = "amlogic,meson-gxl-saradc";
+ status = "okay";
+ #io-channel-cells = <1>;
+ clocks = <&xtal>, <&clkc CLKID_SARADC>,
+ <&clkc CLKID_SARADC_COMP>;
+ clock-names = "xtal", "clk81_gate", "saradc_clk";
+ interrupts = <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>;
+ reg = <0x0 0xc1108680 0x0 0x38>;
+ };
+
+ efuse: efuse{
+ compatible = "amlogic, efuse";
+ read_cmd = <0x82000030>;
+ write_cmd = <0x82000031>;
+ get_max_cmd = <0x82000033>;
+ key = <&efusekey>;
+ clocks = <&clkc CLKID_EFUSE>;
+ clock-names = "efuse_clk";
+ status = "disabled";
+ };
+
+ efusekey:efusekey{
+ keynum = <4>;
+ key0 = <&key_0>;
+ key1 = <&key_1>;
+ key2 = <&key_2>;
+ key3 = <&key_3>;
+ key_0:key_0{
+ keyname = "mac";
+ offset = <0>;
+ size = <6>;
+ };
+ key_1:key_1{
+ keyname = "mac_bt";
+ offset = <6>;
+ size = <6>;
+ };
+ key_2:key_2{
+ keyname = "mac_wifi";
+ offset = <12>;
+ size = <6>;
+ };
+ key_3:key_3{
+ keyname = "usid";
+ offset = <18>;
+ size = <16>;
+ };
+ };
+
+ remote:rc@c8100580 {
+ compatible = "amlogic, aml_remote";
+ dev_name = "meson-remote";
+ reg = <0x0 0xc8100580 0x00 0x44>, /*Multi-format IR controller*/
+ <0x0 0xc8100480 0x00 0x20>; /*Legacy IR controller*/
+ status = "okay";
+ protocol = <REMOTE_TYPE_NEC>;
+ interrupts = <0 196 1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&remote_pins>;
+ map = <&custom_maps>;
+ max_frame_time = <200>; /*set software decoder max frame time*/
+ };
+
+ custom_maps:custom_maps {
+ mapnum = <3>;
+ map0 = <&map_0>;
+ map1 = <&map_1>;
+ map2 = <&map_2>;
+ map_0: map_0{
+ mapname = "amlogic-remote-1";
+ customcode = <0xfb04>;
+ release_delay = <80>;
+ size = <50>; /*keymap size*/
+ keymap = <REMOTE_KEY(0x47, KEY_0)
+ REMOTE_KEY(0x13, KEY_1)
+ REMOTE_KEY(0x10, KEY_2)
+ REMOTE_KEY(0x11, KEY_3)
+ REMOTE_KEY(0x0F, KEY_4)
+ REMOTE_KEY(0x0C, KEY_5)
+ REMOTE_KEY(0x0D, KEY_6)
+ REMOTE_KEY(0x0B, KEY_7)
+ REMOTE_KEY(0x08, KEY_8)
+ REMOTE_KEY(0x09, KEY_9)
+ REMOTE_KEY(0x5C, KEY_RIGHTCTRL)
+ REMOTE_KEY(0x51, KEY_F3)
+ REMOTE_KEY(0x50, KEY_F4)
+ REMOTE_KEY(0x40, KEY_F5)
+ REMOTE_KEY(0x4d, KEY_F6)
+ REMOTE_KEY(0x43, KEY_F7)
+ REMOTE_KEY(0x17, KEY_F8)
+ REMOTE_KEY(0x00, KEY_F9)
+ REMOTE_KEY(0x01, KEY_F10)
+ REMOTE_KEY(0x16, KEY_F11)
+ REMOTE_KEY(0x49, KEY_BACKSPACE)
+ REMOTE_KEY(0x06, KEY_PROPS)
+ REMOTE_KEY(0x14, KEY_UNDO)
+ REMOTE_KEY(0x44, KEY_UP)
+ REMOTE_KEY(0x1D, KEY_DOWN)
+ REMOTE_KEY(0x1C, KEY_LEFT)
+ REMOTE_KEY(0x48, KEY_RIGHT)
+ REMOTE_KEY(0x53, KEY_LEFTMETA)
+ REMOTE_KEY(0x45, KEY_PAGEUP)
+ REMOTE_KEY(0x19, KEY_PAGEDOWN)
+ REMOTE_KEY(0x52, KEY_PAUSE)
+ REMOTE_KEY(0x05, KEY_HANGEUL)
+ REMOTE_KEY(0x59, KEY_HANJA)
+ REMOTE_KEY(0x1b, KEY_SCALE)
+ REMOTE_KEY(0x04, KEY_KPCOMMA)
+ REMOTE_KEY(0x1A, KEY_POWER)
+ REMOTE_KEY(0x0A, KEY_TAB)
+ REMOTE_KEY(0x0e, KEY_MUTE)
+ REMOTE_KEY(0x1F, KEY_HOME)
+ REMOTE_KEY(0x1e, KEY_FRONT)
+ REMOTE_KEY(0x07, KEY_COPY)
+ REMOTE_KEY(0x12, KEY_OPEN)
+ REMOTE_KEY(0x54, KEY_PASTE)
+ REMOTE_KEY(0x02, KEY_FIND)
+ REMOTE_KEY(0x4f, KEY_A)
+ REMOTE_KEY(0x42, KEY_B)
+ REMOTE_KEY(0x5d, KEY_C)
+ REMOTE_KEY(0x4c, KEY_D)
+ REMOTE_KEY(0x58, KEY_CUT)
+ REMOTE_KEY(0x55, KEY_CALC)>;
+ };
+ map_1: map_1{
+ mapname = "amlogic-remote-2";
+ customcode = <0xfe01>;
+ release_delay = <80>;
+ size = <53>;
+ keymap = <REMOTE_KEY(0x01, KEY_1)
+ REMOTE_KEY(0x02, KEY_2)
+ REMOTE_KEY(0x03, KEY_3)
+ REMOTE_KEY(0x04, KEY_4)
+ REMOTE_KEY(0x05, KEY_5)
+ REMOTE_KEY(0x06, KEY_6)
+ REMOTE_KEY(0x07, KEY_7)
+ REMOTE_KEY(0x08, KEY_8)
+ REMOTE_KEY(0x09, KEY_9)
+ REMOTE_KEY(0x0a, KEY_0)
+ REMOTE_KEY(0x1F, KEY_FN_F1)
+ REMOTE_KEY(0x15, KEY_MENU)
+ REMOTE_KEY(0x16, KEY_TAB)
+ REMOTE_KEY(0x0c, KEY_CHANNELUP)
+ REMOTE_KEY(0x0d, KEY_CHANNELDOWN)
+ REMOTE_KEY(0x0e, KEY_VOLUMEUP)
+ REMOTE_KEY(0x0f, KEY_VOLUMEDOWN)
+ REMOTE_KEY(0x11, KEY_HOME)
+ REMOTE_KEY(0x1c, KEY_RIGHT)
+ REMOTE_KEY(0x1b, KEY_LEFT)
+ REMOTE_KEY(0x19, KEY_UP)
+ REMOTE_KEY(0x1a, KEY_DOWN)
+ REMOTE_KEY(0x1d, KEY_ENTER)
+ REMOTE_KEY(0x17, KEY_MUTE)
+ REMOTE_KEY(0x49, KEY_FINANCE)
+ REMOTE_KEY(0x43, KEY_BACK)
+ REMOTE_KEY(0x12, KEY_FN_F4)
+ REMOTE_KEY(0x14, KEY_FN_F5)
+ REMOTE_KEY(0x18, KEY_FN_F6)
+ REMOTE_KEY(0x59, KEY_INFO)
+ REMOTE_KEY(0x5a, KEY_STOPCD)
+ REMOTE_KEY(0x10, KEY_POWER)
+ REMOTE_KEY(0x42, KEY_PREVIOUSSONG)
+ REMOTE_KEY(0x44, KEY_NEXTSONG)
+ REMOTE_KEY(0x1e, KEY_REWIND)
+ REMOTE_KEY(0x4b, KEY_FASTFORWARD)
+ REMOTE_KEY(0x58, KEY_PLAYPAUSE)
+ REMOTE_KEY(0x46, KEY_PROPS)
+ REMOTE_KEY(0x40, KEY_UNDO)
+ REMOTE_KEY(0x38, KEY_SCROLLLOCK)
+ REMOTE_KEY(0x57, KEY_FN)
+ REMOTE_KEY(0x5b, KEY_FN_ESC)
+ REMOTE_KEY(0x54, KEY_RED)
+ REMOTE_KEY(0x4c, KEY_GREEN)
+ REMOTE_KEY(0x4e, KEY_YELLOW)
+ REMOTE_KEY(0x55, KEY_BLUE)
+ REMOTE_KEY(0x53, KEY_BLUETOOTH)
+ REMOTE_KEY(0x52, KEY_WLAN)
+ REMOTE_KEY(0x39, KEY_CAMERA)
+ REMOTE_KEY(0x41, KEY_SOUND)
+ REMOTE_KEY(0x0b, KEY_QUESTION)
+ REMOTE_KEY(0x00, KEY_CHAT)
+ REMOTE_KEY(0x13, KEY_SEARCH)>;
+ };
+ map_2: map_2{
+ mapname = "amlogic-remote-3";
+ customcode = <0xbd02>;
+ release_delay = <80>;
+ size = <17>;
+ keymap = <REMOTE_KEY(0xca,103)
+ REMOTE_KEY(0xd2,108)
+ REMOTE_KEY(0x99,105)
+ REMOTE_KEY(0xc1,106)
+ REMOTE_KEY(0xce,97)
+ REMOTE_KEY(0x45,116)
+ REMOTE_KEY(0xc5,133)
+ REMOTE_KEY(0x80,113)
+ REMOTE_KEY(0xd0,15)
+ REMOTE_KEY(0xd6,125)
+ REMOTE_KEY(0x95,102)
+ REMOTE_KEY(0xdd,104)
+ REMOTE_KEY(0x8c,109)
+ REMOTE_KEY(0x89,131)
+ REMOTE_KEY(0x9c,130)
+ REMOTE_KEY(0x9a,120)
+ REMOTE_KEY(0xcd,121)>;
+ };
+ };
+ aml_reboot{
+ compatible = "aml, reboot";
+ sys_reset = <0x84000009>;
+ sys_poweroff = <0x84000008>;
+ };
+
+ rtc{
+ compatible = "amlogic, aml_vrtc";
+ alarm_reg_addr = <0xc81000a8>;
+ timer_e_addr = <0xc1109988>;
+ init_date = "2017/01/01";
+ status = "okay";
+ };
+
+ pwm_ab: pwm@c1108550 {
+ compatible = "amlogic,gx-ee-pwm";
+ reg = <0x0 0xc1108550 0x0 0x1c>;
+ #pwm-cells = <3>;
+ clocks = <&xtal>,<&xtal>,<&xtal>,<&xtal>;
+ clock-names = "clkin0","clkin1","clkin2","clkin3";
+ status = "disabled";
+ };
+ pwm_cd: pwm@c1108640 {
+ compatible = "amlogic,gx-ee-pwm";
+ reg = <0x0 0xc1108640 0x0 0x1c>;
+ #pwm-cells = <3>;
+ clocks = <&xtal>,<&xtal>,<&xtal>,<&xtal>;
+ clock-names = "clkin0","clkin1","clkin2","clkin3";
+ status = "disabled";
+ };
+ pwm_ef: pwm@c11086c0 {
+ compatible = "amlogic,gx-ee-pwm";
+ reg = <0x0 0xc11086c0 0x0 0x1c>;
+ #pwm-cells = <3>;
+ clocks = <&xtal>,<&xtal>,<&xtal>,<&xtal>;
+ clock-names = "clkin0","clkin1","clkin2","clkin3";
+ status = "disabled";
+ };
+ pwm_aoab: pwm@c8100550 {
+ compatible = "amlogic,gx-ao-pwm";
+ reg = <0x0 0xc8100550 0x0 0x1c>;
+ #pwm-cells = <3>;
+ clocks = <&xtal>,<&xtal>,<&xtal>,<&xtal>;
+ clock-names = "clkin0","clkin1","clkin2","clkin3";
+ status = "disabled";
+ };
+};
+
+&gpu{
+ /*gpu max freq is 750M*/
+ tbl = <&clk125_cfg &clk285_cfg &clk400_cfg
+ &clk500_cfg &clk500_cfg &clk500_cfg &clk500_cfg>;
+};
mapname = "amlogic-remote-2";
customcode = <0xfe01>;
release_delay = <80>;
- size = <53>;
+ size = <57>;
keymap = <REMOTE_KEY(0x01, KEY_1)
REMOTE_KEY(0x02, KEY_2)
REMOTE_KEY(0x03, KEY_3)
REMOTE_KEY(0x41, KEY_SOUND)
REMOTE_KEY(0x0b, KEY_QUESTION)
REMOTE_KEY(0x00, KEY_CHAT)
- REMOTE_KEY(0x13, KEY_SEARCH)>;
+ REMOTE_KEY(0x13, KEY_SEARCH)
+ REMOTE_KEY(0x60, KEY_CONNECT)
+ REMOTE_KEY(0x61, KEY_PROG1)
+ REMOTE_KEY(0x62, KEY_PROG2)
+ REMOTE_KEY(0x63, KEY_PROG3)>;
};
map_2: map_2{
mapname = "amlogic-remote-3";
--- /dev/null
+/*
+ * Amlogic partition set for normal
+ *
+ * Copyright (c) 2017-2017 Amlogic Ltd
+ *
+ * This file is licensed under a dual GPLv2 or BSD license.
+ *
+ */
+
+#include "firmware_normal.dtsi"
+
+/ {
+ partitions: partitions{
+ parts = <17>;
+ part-0 = <&logo>;
+ part-1 = <&recovery>;
+ part-2 = <&misc>;
+ part-3 = <&dto>;
+ part-4 = <&cri_data>;
+ part-5 = <¶m>;
+ part-6 = <&boot>;
+ part-7 = <&rsv>;
+ part-8 = <&metadata>;
+ part-9 = <&vbmeta>;
+ part-10 = <&tee>;
+ part-11 = <&vendor>;
+ part-12 = <&odm>;
+ part-13 = <&system>;
+ part-14 = <&product>;
+ part-15 = <&cache>;
+ part-16 = <&data>;
+
+ logo:logo{
+ pname = "logo";
+ size = <0x0 0x800000>;
+ mask = <1>;
+ };
+ recovery:recovery{
+ pname = "recovery";
+ size = <0x0 0x1800000>;
+ mask = <1>;
+ };
+ misc:misc{
+ pname = "misc";
+ size = <0x0 0x800000>;
+ mask = <1>;
+ };
+ dto:dto{
+ pname = "dto";
+ size = <0x0 0x800000>;
+ mask = <1>;
+ };
+ cri_data:cri_data
+ {
+ pname = "cri_data";
+ size = <0x0 0x800000>;
+ mask = <2>;
+ };
+ rsv:rsv{
+ pname = "rsv";
+ size = <0x0 0x1000000>;
+ mask = <1>;
+ };
+ metadata:metadata{
+ pname = "metadata";
+ size = <0x0 0x1000000>;
+ mask = <1>;
+ };
+ vbmeta:vbmeta{
+ pname = "vbmeta";
+ size = <0x0 0x200000>;
+ mask = <1>;
+ };
+ param:param{
+ pname = "param";
+ size = <0x0 0x1000000>;
+ mask = <2>;
+ };
+ boot:boot
+ {
+ pname = "boot";
+ size = <0x0 0x1000000>;
+ mask = <1>;
+ };
+ tee:tee{
+ pname = "tee";
+ size = <0x0 0x2000000>;
+ mask = <1>;
+ };
+ vendor:vendor
+ {
+ pname = "vendor";
+ size = <0x0 0x9C00000>;
+ mask = <1>;
+ };
+ odm:odm
+ {
+ pname = "odm";
+ size = <0x0 0x4000000>;
+ mask = <1>;
+ };
+ system:system
+ {
+ pname = "system";
+ size = <0x0 0x70800000>;
+ mask = <1>;
+ };
+ product:product{
+ pname = "product";
+ size = <0x0 0x4000000>;
+ mask = <1>;
+ };
+ cache:cache
+ {
+ pname = "cache";
+ size = <0x0 0x2BC00000>;
+ mask = <2>;
+ };
+ data:data
+ {
+ pname = "data";
+ size = <0xffffffff 0xffffffff>;
+ mask = <4>;
+ };
+ };
+};/* end of / */
--- /dev/null
+/*
+ * Amlogic partition set for normal
+ *
+ * Copyright (c) 2017-2017 Amlogic Ltd
+ *
+ * This file is licensed under a dual GPLv2 or BSD license.
+ *
+ */
+
+#include "firmware_normal.dtsi"
+
+/ {
+ partitions: partitions{
+ parts = <17>;
+ part-0 = <&logo>;
+ part-1 = <&recovery>;
+ part-2 = <&misc>;
+ part-3 = <&dto>;
+ part-4 = <&cri_data>;
+ part-5 = <¶m>;
+ part-6 = <&boot>;
+ part-7 = <&rsv>;
+ part-8 = <&metadata>;
+ part-9 = <&vbmeta>;
+ part-10 = <&tee>;
+ part-11 = <&vendor>;
+ part-12 = <&odm>;
+ part-13 = <&system>;
+ part-14 = <&product>;
+ part-15 = <&cache>;
+ part-16 = <&data>;
+
+ logo:logo{
+ pname = "logo";
+ size = <0x0 0x800000>;
+ mask = <1>;
+ };
+ recovery:recovery{
+ pname = "recovery";
+ size = <0x0 0x1800000>;
+ mask = <1>;
+ };
+ misc:misc{
+ pname = "misc";
+ size = <0x0 0x800000>;
+ mask = <1>;
+ };
+ dto:dto{
+ pname = "dto";
+ size = <0x0 0x800000>;
+ mask = <1>;
+ };
+ cri_data:cri_data
+ {
+ pname = "cri_data";
+ size = <0x0 0x800000>;
+ mask = <2>;
+ };
+ rsv:rsv{
+ pname = "rsv";
+ size = <0x0 0x1000000>;
+ mask = <1>;
+ };
+ metadata:metadata{
+ pname = "metadata";
+ size = <0x0 0x1000000>;
+ mask = <1>;
+ };
+ vbmeta:vbmeta{
+ pname = "vbmeta";
+ size = <0x0 0x200000>;
+ mask = <1>;
+ };
+ param:param{
+ pname = "param";
+ size = <0x0 0x1000000>;
+ mask = <2>;
+ };
+ boot:boot
+ {
+ pname = "boot";
+ size = <0x0 0x1000000>;
+ mask = <1>;
+ };
+ tee:tee{
+ pname = "tee";
+ size = <0x0 0x2000000>;
+ mask = <1>;
+ };
+ vendor:vendor
+ {
+ pname = "vendor";
+ size = <0x0 0x10000000>;
+ mask = <1>;
+ };
+ odm:odm
+ {
+ pname = "odm";
+ size = <0x0 0x8000000>;
+ mask = <1>;
+ };
+ system:system
+ {
+ pname = "system";
+ size = <0x0 0x50000000>;
+ mask = <1>;
+ };
+ product:product{
+ pname = "product";
+ size = <0x0 0x8000000>;
+ mask = <1>;
+ };
+ cache:cache
+ {
+ pname = "cache";
+ size = <0x0 0x32000000>;
+ mask = <2>;
+ };
+ data:data
+ {
+ pname = "data";
+ size = <0xffffffff 0xffffffff>;
+ mask = <4>;
+ };
+ };
+};/* end of / */
--- /dev/null
+/*
+ * Amlogic partition set for normal
+ *
+ * Copyright (c) 2017-2017 Amlogic Ltd
+ *
+ * This file is licensed under a dual GPLv2 or BSD license.
+ *
+ */
+/ {
+ partitions: partitions{
+ parts = <14>;
+ part-0 = <&logo>;
+ part-1 = <&recovery>;
+ part-2 = <&misc>;
+ part-3 = <&dto>;
+ part-4 = <&cri_data>;
+ part-5 = <¶m>;
+ part-6 = <&boot>;
+ part-7 = <&rsv>;
+ part-8 = <&tee>;
+ part-9 = <&vendor>;
+ part-10 = <&odm>;
+ part-11 = <&system>;
+ part-12 = <&cache>;
+ part-13 = <&data>;
+
+ logo:logo{
+ pname = "logo";
+ size = <0x0 0x800000>;
+ mask = <1>;
+ };
+ recovery:recovery{
+ pname = "recovery";
+ size = <0x0 0x1800000>;
+ mask = <1>;
+ };
+ misc:misc{
+ pname = "misc";
+ size = <0x0 0x800000>;
+ mask = <1>;
+ };
+ dto:dto{
+ pname = "dto";
+ size = <0x0 0x800000>;
+ mask = <1>;
+ };
+ cri_data:cri_data
+ {
+ pname = "cri_data";
+ size = <0x0 0x800000>;
+ mask = <2>;
+ };
+ rsv:rsv{
+ pname = "rsv";
+ size = <0x0 0x1000000>;
+ mask = <1>;
+ };
+ param:param{
+ pname = "param";
+ size = <0x0 0x1000000>;
+ mask = <2>;
+ };
+ boot:boot
+ {
+ pname = "boot";
+ size = <0x0 0x1000000>;
+ mask = <1>;
+ };
+ tee:tee{
+ pname = "tee";
+ size = <0x0 0x2000000>;
+ mask = <1>;
+ };
+ vendor:vendor
+ {
+ pname = "vendor";
+ size = <0x0 0x10000000>;
+ mask = <1>;
+ };
+ odm:odm
+ {
+ pname = "odm";
+ size = <0x0 0x9000000>;
+ mask = <1>;
+ };
+ system:system
+ {
+ pname = "system";
+ size = <0x0 0x67000000>;
+ mask = <1>;
+ };
+ cache:cache
+ {
+ pname = "cache";
+ size = <0x0 0x32000000>;
+ mask = <2>;
+ };
+ data:data
+ {
+ pname = "data";
+ size = <0xffffffff 0xffffffff>;
+ mask = <4>;
+ };
+ };
+
+ firmware {
+ android {
+ compatible = "android,firmware";
+ vbmeta {
+ compatible = "android,vbmeta";
+ parts = "boot,system,vendor";
+ by_name_prefix="/dev/block";
+ };
+ fstab {
+ compatible = "android,fstab";
+ system {
+ compatible = "android,system";
+ dev = "/dev/block/system";
+ type = "ext4";
+ mnt_flags = "ro,barrier=1,inode_readahead_blks=8";
+ fsmgr_flags = "wait";
+ };
+
+ vendor {
+ compatible = "android,vendor";
+ dev = "/dev/block/vendor";
+ type = "ext4";
+ mnt_flags = "ro,barrier=1,inode_readahead_blks=8";
+ fsmgr_flags = "wait";
+ };
+ odm {
+ compatible = "android,odm";
+ dev = "/dev/block/odm";
+ type = "ext4";
+ mnt_flags = "ro,barrier=1,inode_readahead_blks=8";
+ fsmgr_flags = "wait";
+ };
+ };
+ };
+ };
+};/* end of / */
CONFIG_AMLOGIC_SND_SOC_SSM3515=y
CONFIG_AMLOGIC_SND_SOC_TAS575X=y
CONFIG_AMLOGIC_SND_SOC_AD82584F=y
+CONFIG_AMLOGIC_SND_SOC_CS42528=y
CONFIG_AMLOGIC_SND_SOC=y
CONFIG_AMLOGIC_SND_SOC_MESON=y
CONFIG_AMLOGIC_SND_SOC_AUGE=y
make ARCH=arm64 gxl_p212_1g.dtb || echo "Compile dtb Fail !!"
+make ARCH=arm64 gxl_sei210_2g.dtb || echo "Compile dtb Fail !!"
+
+make ARCH=arm64 gxl_sei210_1g.dtb || echo "Compile dtb Fail !!"
+
make ARCH=arm64 gxl_p400_2g.dtb || echo "Compile dtb Fail !!"
make ARCH=arm64 gxl_p401_2g.dtb || echo "Compile dtb Fail !!"
p_aml_audio->av_mute_desc =
gpiod_get(card->dev,
"mute_gpio",
- GPIOD_OUT_HIGH);
+ 0);
of_property_read_u32(card->dev->of_node, "av_mute_inv",
&p_aml_audio->av_mute_inv);
of_property_read_u32(card->dev->of_node, "sleep_time",
p_aml_audio->amp_mute_desc =
gpiod_get(card->dev,
"amp_mute_gpio",
- GPIOD_OUT_HIGH);
+ 0);
of_property_read_u32(card->dev->of_node, "amp_mute_inv",
&p_aml_audio->amp_mute_inv);
Enable Support for ESMT AD82584f CODEC.
Select this if your AD82584F is connected via an I2C bus.
+config AMLOGIC_SND_SOC_CS42528
+ bool "Cirrus Logic CS42528"
+ depends on AMLOGIC_SND_SOC_CODECS
+ depends on I2C
+ default n
+ help
+ Enable Support for Cirrus Logic CS42528 CODEC.
+ Select this if your CS425X8 is connected via an I2C bus.
+ Enable Support for Cirrus Logic CS42528 CODEC.
+ Select this if your CS42528 is connected via an I2C bus.
#endif #AMLOGIC_SND_SOC_CODECS
obj-$(CONFIG_AMLOGIC_SND_SOC_TAS575X) += tas575x.o
obj-$(CONFIG_AMLOGIC_SND_SOC_ES7243) += es7243.o
obj-$(CONFIG_AMLOGIC_SND_SOC_AD82584F) += ad82584f.o
+obj-$(CONFIG_AMLOGIC_SND_SOC_CS42528) += cs42528.o
--- /dev/null
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/tlv.h>
+#include <linux/amlogic/aml_gpio_consumer.h>
+
+#include "cs42528.h"
+
+#define DEV_NAME "cs42528"
+
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+#include <linux/earlysuspend.h>
+static void cs42528_early_suspend(struct early_suspend *h);
+static void cs42528_late_resume(struct early_suspend *h);
+#endif
+
+/* Power-up register defaults */
+struct reg_default cs42528_reg_defaults[] = {
+ { 0x00, 0x00 },
+ { 0x03, 0x08 }, /* Functional Mode */
+ { 0x04, 0x40 }, /* Interface Formats */
+ { 0x05, 0x80 }, /* Misc Control */
+ { 0x06, 0x02 }, /* Clock Control */
+ { 0x0D, 0x28 }, /* Volume Control */
+ { 0x0E, 0xff }, /* Channel Mute */
+ { 0x0F, 0x00 }, /* Volume Control A1 */
+ { 0x10, 0x00 }, /* Volume Control B1 */
+ { 0x11, 0x00 }, /* Volume Control A2 */
+ { 0x12, 0x00 }, /* Volume Control B2 */
+ { 0x13, 0x00 }, /* Volume Control A3 */
+ { 0x14, 0x00 }, /* Volume Control B3 */
+ { 0x15, 0x00 }, /* Volume Control A4 */
+ { 0x16, 0x00 }, /* Volume Control B4 */
+ { 0x17, 0x00 }, /* Channel invert */
+ { 0x18, 0x09 }, /* Mixing Ctrl Pair 1 */
+ { 0x19, 0x09 }, /* Mixing Ctrl Pair 2 */
+ { 0x1A, 0x09 }, /* Mixing Ctrl Pair 3 */
+ { 0x1B, 0x09 }, /* Mixing Ctrl Pair 4 */
+ { 0x1C, 0x00 }, /* ADC Left Ch. Gain */
+ { 0x1D, 0x00 }, /* ADC Right Ch. Gain */
+ { 0x1E, 0x80 }, /* RVCR Mode Ctrl 1 */
+ { 0x1F, 0x00 }, /* RVCR Mode Ctrl 2 */
+ { 0x24, 0x00 }, /* Channel Status Data Buffer Control */
+ { 0x28, 0x1f }, /* MuteC Pin Control */
+};
+
+#define CS42528_REG_COUNT 26
+static int cs42528_reg_table[CS42528_REG_COUNT][2] = {
+ { 0x00, 0x00 },
+ { 0x03, 0x08 }, /* Functional Mode */
+ { 0x04, 0x40 }, /* Interface Formats */
+ { 0x05, 0x80 }, /* Misc Control */
+ { 0x06, 0x02 }, /* Clock Control */
+ { 0x0D, 0x28 }, /* Volume Control */
+ { 0x0E, 0xff }, /* Channel Mute */
+ { 0x0F, 0x00 }, /* Volume Control A1 */
+ { 0x10, 0x00 }, /* Volume Control B1 */
+ { 0x11, 0x00 }, /* Volume Control A2 */
+ { 0x12, 0x00 }, /* Volume Control B2 */
+ { 0x13, 0x00 }, /* Volume Control A3 */
+ { 0x14, 0x00 }, /* Volume Control B3 */
+ { 0x15, 0x00 }, /* Volume Control A4 */
+ { 0x16, 0x00 }, /* Volume Control B4 */
+ { 0x17, 0x00 }, /* Channel invert */
+ { 0x18, 0x09 }, /* Mixing Ctrl Pair 1 */
+ { 0x19, 0x09 }, /* Mixing Ctrl Pair 2 */
+ { 0x1A, 0x09 }, /* Mixing Ctrl Pair 3 */
+ { 0x1B, 0x09 }, /* Mixing Ctrl Pair 4 */
+ { 0x1C, 0x00 }, /* ADC Left Ch. Gain */
+ { 0x1D, 0x00 }, /* ADC Right Ch. Gain */
+ { 0x1E, 0x80 }, /* RVCR Mode Ctrl 1 */
+ { 0x1F, 0x00 }, /* RVCR Mode Ctrl 2 */
+ { 0x24, 0x00 }, /* Channel Status Data Buffer Control */
+ { 0x28, 0x1f }, /* MuteC Pin Control */
+};
+
+#define CS42528_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | \
+ SNDRV_PCM_FMTBIT_S24_LE | \
+ SNDRV_PCM_FMTBIT_S32_LE)
+
+/* codec private data */
+struct cs42528_priv {
+ struct regmap *regmap;
+ struct snd_soc_codec *codec;
+ struct cs42528_platform_data *pdata;
+ int sysclk;
+#ifdef CONFIG_HAS_EARLYSUSPEND
+ struct early_suspend early_suspend;
+#endif
+};
+
+/* -127dB to 0dB with step of 0.5dB */
+static const DECLARE_TLV_DB_SCALE(dac_tlv, -12700, 50, 0);
+
+/* -15dB to 15dB with step of 1dB */
+static const DECLARE_TLV_DB_SCALE(adc_tlv, -1500, 100, 0);
+
+static const char *const cs42528_szc[] = {
+ "Immediate Change",
+ "Zero Cross",
+ "Soft Ramp",
+ "Soft Ramp on Zero Cross"
+};
+
+static const struct soc_enum dac_szc_enum =
+ SOC_ENUM_SINGLE(CS42528_TXCTL, 4, 4, cs42528_szc);
+
+static const struct snd_kcontrol_new cs42528_snd_controls[] = {
+ SOC_DOUBLE_R_TLV("DAC1 Playback Volume", CS42528_VOLCTLA1,
+ CS42528_VOLCTLB1, 0, 0xff, 1, dac_tlv),
+ SOC_DOUBLE_R_TLV("DAC2 Playback Volume", CS42528_VOLCTLA2,
+ CS42528_VOLCTLB2, 0, 0xff, 1, dac_tlv),
+ SOC_DOUBLE_R_TLV("DAC3 Playback Volume", CS42528_VOLCTLA3,
+ CS42528_VOLCTLB3, 0, 0xff, 1, dac_tlv),
+ SOC_DOUBLE_R_TLV("DAC4 Playback Volume", CS42528_VOLCTLA4,
+ CS42528_VOLCTLB4, 0, 0xff, 1, dac_tlv),
+ SOC_DOUBLE_R_S_TLV("ADC Channel Gain", CS42528_ADCLGAIN,
+ CS42528_ADCRGAIN, 0, -0x0f, 0x0f, 5, 0, adc_tlv),
+ SOC_DOUBLE("DAC1 Invert Switch", CS42528_CHINV, 0, 1, 1, 0),
+ SOC_DOUBLE("DAC2 Invert Switch", CS42528_CHINV, 2, 3, 1, 0),
+ SOC_DOUBLE("DAC3 Invert Switch", CS42528_CHINV, 4, 5, 1, 0),
+ SOC_DOUBLE("DAC4 Invert Switch", CS42528_CHINV, 6, 7, 1, 0),
+ SOC_SINGLE("DAC Single Volume Control Switch", CS42528_TXCTL, 6, 1, 0),
+ SOC_ENUM("DAC Soft Ramp & Zero Cross Control Switch", dac_szc_enum),
+ SOC_SINGLE("DAC Auto Mute Switch", CS42528_TXCTL, 3, 1, 0),
+ SOC_SINGLE("DAC Serial Port Mute Switch", CS42528_TXCTL, 2, 1, 0),
+};
+
+#if 0
+static const struct snd_soc_dapm_widget cs42528_dapm_widgets[] = {
+ SND_SOC_DAPM_DAC("DAC1", "Playback", CS42528_PWRCTL, 1, 1),
+ SND_SOC_DAPM_DAC("DAC2", "Playback", CS42528_PWRCTL, 2, 1),
+ SND_SOC_DAPM_DAC("DAC3", "Playback", CS42528_PWRCTL, 3, 1),
+ SND_SOC_DAPM_DAC("DAC4", "Playback", CS42528_PWRCTL, 4, 1),
+
+ SND_SOC_DAPM_OUTPUT("AOUT1L"),
+ SND_SOC_DAPM_OUTPUT("AOUT1R"),
+ SND_SOC_DAPM_OUTPUT("AOUT2L"),
+ SND_SOC_DAPM_OUTPUT("AOUT2R"),
+ SND_SOC_DAPM_OUTPUT("AOUT3L"),
+ SND_SOC_DAPM_OUTPUT("AOUT3R"),
+ SND_SOC_DAPM_OUTPUT("AOUT4L"),
+ SND_SOC_DAPM_OUTPUT("AOUT4R"),
+
+ SND_SOC_DAPM_ADC("ADC", "Capture", CS42528_PWRCTL, 5, 1),
+
+ SND_SOC_DAPM_INPUT("AIN1L"),
+ SND_SOC_DAPM_INPUT("AIN1R"),
+ SND_SOC_DAPM_INPUT("AIN2L"),
+ SND_SOC_DAPM_INPUT("AIN2R"),
+
+ SND_SOC_DAPM_SUPPLY("PWR", CS42528_PWRCTL, 0, 1, NULL, 0),
+};
+
+static const struct snd_soc_dapm_route cs42528_dapm_routes[] = {
+ /* Playback */
+ { "AOUT1L", NULL, "DAC1" },
+ { "AOUT1R", NULL, "DAC1" },
+ { "DAC1", NULL, "PWR" },
+
+ { "AOUT2L", NULL, "DAC2" },
+ { "AOUT2R", NULL, "DAC2" },
+ { "DAC2", NULL, "PWR" },
+
+ { "AOUT3L", NULL, "DAC3" },
+ { "AOUT3R", NULL, "DAC3" },
+ { "DAC3", NULL, "PWR" },
+
+ { "AOUT4L", NULL, "DAC4" },
+ { "AOUT4R", NULL, "DAC4" },
+ { "DAC4", NULL, "PWR" },
+
+ /* Capture */
+ { "ADC1", NULL, "AIN1L" },
+ { "ADC1", NULL, "AIN1R" },
+ { "ADC1", NULL, "PWR" },
+
+ { "ADC2", NULL, "AIN2L" },
+ { "ADC2", NULL, "AIN2R" },
+ { "ADC2", NULL, "PWR" },
+};
+#endif
+
+static int cs42528_set_dai_sysclk(struct snd_soc_dai *codec_dai,
+ int clk_id, unsigned int freq, int dir)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct cs42528_priv *cs42528 = snd_soc_codec_get_drvdata(codec);
+
+ cs42528->sysclk = freq;
+
+ pr_info("%s, %d clk:%d\n", __func__, __LINE__, freq);
+
+ return 0;
+}
+
+static int cs42528_set_dai_fmt(struct snd_soc_dai *codec_dai,
+ unsigned int format)
+{
+ struct snd_soc_codec *codec = codec_dai->codec;
+ struct cs42528_priv *cs42528 = snd_soc_codec_get_drvdata(codec);
+ u32 val;
+
+ pr_info("%s, %d format:%d\n", __func__, __LINE__, format);
+
+ /* Set DAI format */
+ switch (format & SND_SOC_DAIFMT_FORMAT_MASK) {
+ case SND_SOC_DAIFMT_LEFT_J:
+ val = CS42528_INTF_DAC_DIF_LEFTJ;
+ break;
+ case SND_SOC_DAIFMT_I2S:
+ val = CS42528_INTF_DAC_DIF_I2S;
+ break;
+ case SND_SOC_DAIFMT_RIGHT_J:
+ val = CS42528_INTF_DAC_DIF_RIGHTJ;
+ break;
+ default:
+ dev_err(codec->dev, "unsupported dai format\n");
+ return -EINVAL;
+ }
+
+ regmap_update_bits(cs42528->regmap, CS42528_INTF,
+ CS42528_INTF_DAC_DIF_MASK, val);
+
+ /* Set master/slave audio interface */
+ switch (format & SND_SOC_DAIFMT_MASTER_MASK) {
+ case SND_SOC_DAIFMT_CBS_CFS:
+ break;
+ case SND_SOC_DAIFMT_CBM_CFM:
+ break;
+ default:
+ dev_err(codec->dev, "unsupported master/slave mode\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int cs42528_hw_params(struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params,
+ struct snd_soc_dai *dai)
+{
+ unsigned int rate;
+
+ rate = params_rate(params);
+
+ pr_info("%s %d rate: %u\n", __func__, __LINE__, rate);
+
+ switch (params_format(params)) {
+ case SNDRV_PCM_FORMAT_S24_LE:
+ case SNDRV_PCM_FORMAT_S24_BE:
+ pr_debug("24bit\n");
+ break;
+
+ case SNDRV_PCM_FORMAT_S32_LE:
+ case SNDRV_PCM_FORMAT_S20_3LE:
+ case SNDRV_PCM_FORMAT_S20_3BE:
+ pr_debug("20bit\n");
+ break;
+
+ case SNDRV_PCM_FORMAT_S16_LE:
+ case SNDRV_PCM_FORMAT_S16_BE:
+ pr_debug("16bit\n");
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int cs42528_digital_mute(struct snd_soc_dai *dai, int mute)
+{
+ struct snd_soc_codec *codec = dai->codec;
+
+ pr_info("%s %d mute: %d\n", __func__, __LINE__, mute);
+
+ if (mute)
+ snd_soc_write(codec, CS42528_DACMUTE, 0xff);
+ else
+ snd_soc_write(codec, CS42528_DACMUTE, 0);
+
+ return 0;
+}
+
+static const struct snd_soc_dai_ops cs42528_dai_ops = {
+ .hw_params = cs42528_hw_params,
+ .set_sysclk = cs42528_set_dai_sysclk,
+ .set_fmt = cs42528_set_dai_fmt,
+ .digital_mute = cs42528_digital_mute,
+};
+
+static struct snd_soc_dai_driver cs42528_dai = {
+ .name = DEV_NAME,
+ .playback = {
+ .stream_name = "HIFI Playback",
+ .channels_min = 2,
+ .channels_max = 8,
+ .rates = SNDRV_PCM_RATE_8000_192000,
+ .formats = CS42528_FORMATS,
+ },
+ .capture = {
+ .stream_name = "Capture",
+ .channels_min = 2,
+ .channels_max = 8,
+ .rates = SNDRV_PCM_RATE_8000_192000,
+ .formats = CS42528_FORMATS,
+ },
+ .ops = &cs42528_dai_ops,
+};
+
+static int reset_cs42528(struct snd_soc_codec *codec)
+{
+ struct cs42528_priv *cs42528 = snd_soc_codec_get_drvdata(codec);
+ struct cs42528_platform_data *pdata = cs42528->pdata;
+ int ret = 0;
+
+ if (pdata->reset_pin < 0)
+ return 0;
+
+ ret = devm_gpio_request_one(codec->dev, pdata->reset_pin,
+ GPIOF_OUT_INIT_LOW,
+ "cs42528-reset-pin");
+ if (ret < 0)
+ return -1;
+
+ gpio_direction_output(pdata->reset_pin, GPIOF_OUT_INIT_LOW);
+ mdelay(1);
+ gpio_direction_output(pdata->reset_pin, GPIOF_OUT_INIT_HIGH);
+ msleep(85);
+
+ return 0;
+}
+
+static int cs42528_init(struct snd_soc_codec *codec)
+{
+ int i;
+
+ dev_info(codec->dev, "cs42528_init!\n");
+
+ reset_cs42528(codec);
+
+ for (i = 0; i < CS42528_REG_COUNT; i++) {
+ snd_soc_write(codec, cs42528_reg_table[i][0],
+ cs42528_reg_table[i][1]);
+ }
+
+ // Short delay to finish register writes
+ msleep(10);
+
+ // Write CS42528 Powerup Register
+ snd_soc_write(codec, CS42528_PWRCTL, 0x40);
+
+ return 0;
+}
+
+static int cs42528_probe(struct snd_soc_codec *codec)
+{
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+ cs42528->early_suspend.level = EARLY_SUSPEND_LEVEL_BLANK_SCREEN;
+ cs42528->early_suspend.suspend = cs42528_early_suspend;
+ cs42528->early_suspend.resume = cs42528_late_resume;
+ cs42528->early_suspend.param = codec;
+ register_early_suspend(&(cs42528->early_suspend));
+#endif
+
+ cs42528_init(codec);
+
+ return 0;
+}
+
+static int cs42528_remove(struct snd_soc_codec *codec)
+{
+#ifdef CONFIG_HAS_EARLYSUSPEND
+ struct cs42528_priv *cs42528 = snd_soc_codec_get_drvdata(codec);
+
+ unregister_early_suspend(&(cs42528->early_suspend));
+#endif
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int cs42528_suspend(struct snd_soc_codec *codec)
+{
+ dev_info(codec->dev, "cs42528_suspend!\n");
+ return 0;
+}
+
+static int cs42528_resume(struct snd_soc_codec *codec)
+{
+ dev_info(codec->dev, "cs42528_resume!\n");
+ return 0;
+}
+#else
+#define cs42528_suspend NULL
+#define cs42528_resume NULL
+#endif
+
+#ifdef CONFIG_HAS_EARLYSUSPEND
+static void cs42528_early_suspend(struct early_suspend *h)
+{
+}
+
+static void cs42528_late_resume(struct early_suspend *h)
+{
+}
+#endif
+
+static const struct snd_soc_codec_driver soc_codec_dev_cs42528 = {
+ .probe = cs42528_probe,
+ .remove = cs42528_remove,
+ .suspend = cs42528_suspend,
+ .resume = cs42528_resume,
+ .component_driver = {
+ .controls = cs42528_snd_controls,
+ .num_controls = ARRAY_SIZE(cs42528_snd_controls),
+ //.dapm_widgets = cs42528_dapm_widgets,
+ //.num_dapm_widgets = ARRAY_SIZE(cs42528_dapm_widgets),
+ //.dapm_routes = cs42528_dapm_routes,
+ //.num_dapm_routes = ARRAY_SIZE(cs42528_dapm_routes),
+ }
+};
+
+static const struct regmap_config cs42528_regmap = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = CS42528_NUMREGS,
+ .reg_defaults = cs42528_reg_defaults,
+ .num_reg_defaults = ARRAY_SIZE(cs42528_reg_defaults),
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static int cs42528_parse_dt(
+ struct cs42528_priv *cs42528,
+ struct device_node *np)
+{
+ int ret = 0;
+ int reset_pin = -1;
+
+ reset_pin = of_get_named_gpio(np, "reset_pin", 0);
+ if (reset_pin < 0) {
+ pr_err("%s fail to get reset pin from dts!\n", __func__);
+ ret = -1;
+ } else {
+ pr_info("%s reset_pin = %d!\n", __func__, reset_pin);
+ }
+ cs42528->pdata->reset_pin = reset_pin;
+
+ return ret;
+}
+
+static int cs42528_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct cs42528_priv *cs42528;
+ struct cs42528_platform_data *pdata;
+ int ret = 0;
+ const char *codec_name;
+
+ cs42528 = devm_kzalloc(&i2c->dev, sizeof(struct cs42528_priv),
+ GFP_KERNEL);
+ if (!cs42528)
+ return -ENOMEM;
+
+ cs42528->regmap = devm_regmap_init_i2c(i2c, &cs42528_regmap);
+ if (IS_ERR(cs42528->regmap)) {
+ ret = PTR_ERR(cs42528->regmap);
+ dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
+ ret);
+ return ret;
+ }
+
+ pdata = devm_kzalloc(&i2c->dev,
+ sizeof(struct cs42528_platform_data),
+ GFP_KERNEL);
+ if (!pdata) {
+ pr_err("%s failed to kzalloc for cs42528 pdata\n", __func__);
+ return -ENOMEM;
+ }
+
+ cs42528->pdata = pdata;
+
+ cs42528_parse_dt(cs42528, i2c->dev.of_node);
+
+ if (of_property_read_string(i2c->dev.of_node,
+ "codec_name",
+ &codec_name)) {
+ pr_info("no codec name\n");
+ return -1;
+ }
+ pr_info("codec name = %s\n", codec_name);
+ if (codec_name)
+ dev_set_name(&i2c->dev, "%s", codec_name);
+
+ i2c_set_clientdata(i2c, cs42528);
+
+ ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_cs42528,
+ &cs42528_dai, 1);
+ if (ret != 0)
+ dev_err(&i2c->dev, "Failed to register codec (%d)\n", ret);
+
+ return ret;
+}
+
+static int cs42528_i2c_remove(struct i2c_client *client)
+{
+ snd_soc_unregister_codec(&client->dev);
+
+ return 0;
+}
+
+static const struct i2c_device_id cs42528_i2c_id[] = {
+ { "cs42528", 0 },
+ {}
+};
+
+static const struct of_device_id cs42528_of_id[] = {
+ {.compatible = "cirrus,cs42528",},
+ { /* senitel */ }
+};
+MODULE_DEVICE_TABLE(of, cs42528_of_id);
+
+static struct i2c_driver cs42528_i2c_driver = {
+ .driver = {
+ .name = DEV_NAME,
+ .of_match_table = cs42528_of_id,
+ .owner = THIS_MODULE,
+ },
+ .probe = cs42528_i2c_probe,
+ .remove = cs42528_i2c_remove,
+ .id_table = cs42528_i2c_id,
+};
+module_i2c_driver(cs42528_i2c_driver);
+
+MODULE_DESCRIPTION("ASoC CS42528 driver");
+MODULE_AUTHOR("AML MM team");
+MODULE_LICENSE("GPL");
--- /dev/null
+#ifndef _CS42528_H
+#define _CS42528_H
+
+struct cs42528_platform_data {
+ int reset_pin;
+ int mute_pin;
+};
+
+/* CS42888 register map */
+#define CS42528_CHIPID 0x01 /* Chip ID */
+#define CS42528_PWRCTL 0x02 /* Power Control */
+#define CS42528_FUNCMOD 0x03 /* Functional Mode */
+#define CS42528_INTF 0x04 /* Interface Formats */
+#define CS42528_MISCCTL 0x05 /* Misc Control */
+#define CS42528_CLKCTL 0x06 /* Clock Control */
+#define CS42528_CLKRATIO 0x07 /* OMCK/PLL_CLK Ratio */
+#define CS42528_RVCRSTA 0x08 /* RVCR Status */
+
+#define CS42528_BPPCB0 0x09 /* Burst Preamble PC Byte 0 */
+#define CS42528_BPPCB1 0x0A /* Burst Preamble PC Byte 1 */
+#define CS42528_BPPDB0 0x0B /* Burst Preamble PD Byte 0 */
+#define CS42528_BPPDB1 0x0C /* Burst Preamble PD Byte 1 */
+
+#define CS42528_TXCTL 0x0D /* Volume Transition Control */
+#define CS42528_DACMUTE 0x0E /* Channel Mute */
+
+#define CS42528_VOLCTLA1 0x0F /* Volume Control A1 */
+#define CS42528_VOLCTLB1 0x10 /* Volume Control B1 */
+#define CS42528_VOLCTLA2 0x11 /* Volume Control A2 */
+#define CS42528_VOLCTLB2 0x12 /* Volume Control B2 */
+#define CS42528_VOLCTLA3 0x13 /* Volume Control A3 */
+#define CS42528_VOLCTLB3 0x14 /* Volume Control B3 */
+#define CS42528_VOLCTLA4 0x15 /* Volume Control A4 */
+#define CS42528_VOLCTLB4 0x16 /* Volume Control B4 */
+
+#define CS42528_CHINV 0x17 /* Channel invert */
+
+#define CS42528_MIXCTLP1 0x18 /* Mixing Ctrl Pair 1 */
+#define CS42528_MIXCTLP2 0x19 /* Mixing Ctrl Pair 2 */
+#define CS42528_MIXCTLP3 0x1A /* Mixing Ctrl Pair 3 */
+#define CS42528_MIXCTLP4 0x1B /* Mixing Ctrl Pair 4 */
+
+#define CS42528_ADCLGAIN 0x1C /* ADC Left Ch. Gain */
+#define CS42528_ADCRGAIN 0x1D /* ADC Right Ch. Gain */
+
+#define CS42528_RCVRCTL1 0x1E /* RVCR Mode Ctrl 1 */
+#define CS42528_RCVRCTL2 0x1F /* RVCR Mode Ctrl 2 */
+#define CS42528_MUTECTRL 0x28 /* MuteC Pin Control */
+
+#define CS42528_FIRSTREG CS42528_CHIPID
+#define CS42528_LASTREG CS42528_MUTECTRL
+#define CS42528_NUMREGS (CS42528_LASTREG - CS42528_FIRSTREG + 1)
+#define CS42528_I2C_INCR 0x80
+
+/* Chip I.D. and Revision Register (Address 01h) */
+#define CS42528_CHIPID_CHIP_ID_MASK 0xF0
+#define CS42528_CHIPID_REV_ID_MASK 0x0F
+
+/* Power Control (Address 02h) */
+#define CS42528_PWRCTL_PDN_RCVR1_MASK (1 << 7)
+#define CS42528_PWRCTL_PDN_RCVR1 (1 << 7)
+#define CS42528_PWRCTL_PDN_RCVR0_MASK (1 << 6)
+#define CS42528_PWRCTL_PDN_RCVR0 (1 << 6)
+#define CS42528_PWRCTL_PDN_ADC_MASK (1 << 5)
+#define CS42528_PWRCTL_PDN_ADC (1 << 5)
+#define CS42528_PWRCTL_PDN_DAC4_MASK (1 << 4)
+#define CS42528_PWRCTL_PDN_DAC4 (1 << 4)
+#define CS42528_PWRCTL_PDN_DAC3_MASK (1 << 3)
+#define CS42528_PWRCTL_PDN_DAC3 (1 << 3)
+#define CS42528_PWRCTL_PDN_DAC2_MASK (1 << 2)
+#define CS42528_PWRCTL_PDN_DAC2 (1 << 2)
+#define CS42528_PWRCTL_PDN_DAC1_MASK (1 << 1)
+#define CS42528_PWRCTL_PDN_DAC1 (1 << 1)
+#define CS42528_PWRCTL_PDN_MASK (1 << 0)
+#define CS42528_PWRCTL_PDN (1 << 0)
+
+/* Interface Formats (Address 04h) */
+#define CS42528_INTF_DAC_DIF_MASK (3 << 6)
+#define CS42528_INTF_DAC_DIF_LEFTJ (0 << 6)
+#define CS42528_INTF_DAC_DIF_I2S (1 << 6)
+#define CS42528_INTF_DAC_DIF_RIGHTJ (2 << 6)
+
+/* Channel Mute */
+#define CS42528_DACMUTE_ALL 0xFF
+
+#endif /* _CS42528_H */
projects / platform / kernel / linux-amlogic.git / commitdiff