--- /dev/null
+Design for Stereoscopic & Multiview Video Handling
+==================================================
+
+There are two cases to handle:
+
+* Encoded video output from a demuxer to parser / decoder or from encoders into a muxer.
+* Raw video buffers
+
+The design below is somewhat based on the proposals from
+[bug 611157](https://bugzilla.gnome.org/show_bug.cgi?id=611157)
+
+Multiview is used as a generic term to refer to handling both
+stereo content (left and right eye only) as well as extensions for videos
+containing multiple independent viewpoints.
+
+Encoded Signalling
+------------------
+This is regarding the signalling in caps and buffers from demuxers to
+parsers (sometimes) or out from encoders.
+
+For backward compatibility with existing codecs many transports of
+stereoscopic 3D content use normal 2D video with 2 views packed spatially
+in some way, and put extra new descriptions in the container/mux.
+
+Info in the demuxer seems to apply to stereo encodings only. For all
+MVC methods I know, the multiview encoding is in the video bitstream itself
+and therefore already available to decoders. Only stereo systems have been retro-fitted
+into the demuxer.
+
+Also, sometimes extension descriptions are in the codec (e.g. H.264 SEI FPA packets)
+and it would be useful to be able to put the info onto caps and buffers from the
+parser without decoding.
+
+To handle both cases, we need to be able to output the required details on
+encoded video for decoders to apply onto the raw video buffers they decode.
+
+*If there ever is a need to transport multiview info for encoded data the
+same system below for raw video or some variation should work*
+
+### Encoded Video: Parameters to transmit in caps
+1. multiview-mode (called "Channel Layout" in bug 611157)
+ * Whether a stream is mono, for a single eye, stereo, mixed-mono-stereo
+ (switches between mono and stereo - mp4 can do this)
+ * Uses a buffer flag to mark individual buffers as mono or "not mono"
+ (single|stereo|multiview) for mixed scenarios. The alternative (not
+ proposed) is for the demuxer to switch caps for each mono to not-mono
+ change, and not used a 'mixed' caps variant at all.
+ * _single_ refers to a stream of buffers that only contain 1 view.
+ It is different from mono in that the stream is a marked left or right
+ eye stream for later combining in a mixer or when displaying.
+ * _multiple_ marks a stream with multiple independent views encoded.
+ It is included in this list for completeness. As noted above, there's
+ currently no scenario that requires marking encoded buffers as MVC.
+2. Frame-packing arrangements / view sequence orderings
+ * Possible frame packings: side-by-side, side-by-side-quincunx,
+ column-interleaved, row-interleaved, top-bottom, checker-board
+ * bug 611157 - sreerenj added side-by-side-full and top-bottom-full but
+ I think that's covered by suitably adjusting pixel-aspect-ratio. If
+ not, they can be added later.
+ * _top-bottom_, _side-by-side_, _column-interleaved_, _row-interleaved_ are as the names suggest.
+ * _checker-board_, samples are left/right pixels in a chess grid +-+-+-/-+-+-+
+ * _side-by-side-quincunx_. Side By Side packing, but quincunx sampling -
+ 1 pixel offset of each eye needs to be accounted when upscaling or displaying
+ * there may be other packings (future expansion)
+ * Possible view sequence orderings: frame-by-frame, frame-primary-secondary-tracks, sequential-row-interleaved
+ * _frame-by-frame_, each buffer is left, then right view etc
+ * _frame-primary-secondary-tracks_ - the file has 2 video tracks (primary and secondary), one is left eye, one is right.
+ Demuxer info indicates which one is which.
+ Handling this means marking each stream as all-left and all-right views, decoding separately, and combining automatically (inserting a mixer/combiner in playbin)
+ -> *Leave this for future expansion*
+ * _sequential-row-interleaved_ Mentioned by sreerenj in bug patches, I can't find a mention of such a thing. Maybe it's in MPEG-2
+ -> *Leave this for future expansion / deletion*
+3. view encoding order
+ * Describes how to decide which piece of each frame corresponds to left or right eye
+ * Possible orderings left, right, left-then-right, right-then-left
+ - Need to figure out how we find the correct frame in the demuxer to start decoding when seeking in frame-sequential streams
+ - Need a buffer flag for marking the first buffer of a group.
+4. "Frame layout flags"
+ * flags for view specific interpretation
+ * horizontal-flip-left, horizontal-flip-right, vertical-flip-left, vertical-flip-right
+ Indicates that one or more views has been encoded in a flipped orientation, usually due to camera with mirror or displays with mirrors.
+ * This should be an actual flags field. Registered GLib flags types aren't generally well supported in our caps - the type might not be loaded/registered yet when parsing a caps string, so they can't be used in caps templates in the registry.
+ * It might be better just to use a hex value / integer
+
+Buffer representation for raw video
+-----------------------------------
+* Transported as normal video buffers with extra metadata
+* The caps define the overall buffer width/height, with GstVideoMeta to extract the individual views.
+* pixel-aspect-ratio adjusted if needed to double the overall width/height
+* video sinks that don't know about multiview extensions yet should show the '0th' GstVideoMeta and
+ therefore the 'primary' view in a backwards compatible way for simple frame-packed transports.
+ For frame-sequence outputs, things might look weird, but just adding multiview-mode to the sink caps
+ can disallow those transports.
+* _row-interleaved_ packing is actually just side-by-side memory layout with half frame width, twice
+ the height, so can be handled by adjusting the overall caps and strides
+* Other exotic layouts need new pixel formats defined (checker-board, column-interleaved, side-by-side-quincunx)
+* _Frame-by-frame_ - one view per buffer, but with alternating metas marking which buffer is which left/right/other view and using a new buffer flag as described above
+ to mark the start of a group of corresponding frames.
+* New video caps addition as for encoded buffers
+
+### Proposed Caps fields
+Combining the requirements above and collapsing the combinations into mnemonics:
+
+* multiview-mode =
+ mono | left | right | sbs | sbs-quin | col | row | topbot | checkers |
+ frame-by-frame | mixed-sbs | mixed-sbs-quin | mixed-col | mixed-row |
+ mixed-topbot | mixed-checkers | mixed-frame-by-frame | multiview-frames mixed-multiview-frames
+* multiview-flags =
+ + 0x0000 none
+ + 0x0001 right-view-first
+ + 0x0002 left-h-flipped
+ + 0x0004 left-v-flipped
+ + 0x0008 right-h-flipped
+ + 0x0010 right-v-flipped
+
+### Proposed new buffer flags
+Add two new GST_VIDEO_BUFFER flags in video-frame.h and make it clear that those
+flags can apply to encoded video buffers too. wtay says that's currently the
+case anyway, but the documentation should say it.
+
+**GST_VIDEO_BUFFER_FLAG_MULTIPLE_VIEW** - Marks a buffer as representing non-mono content, although it may be a single (left or right) eye view.
+**GST_VIDEO_BUFFER_FLAG_FIRST_IN_BUNDLE** - for frame-sequential methods of transport, mark the "first" of a left/right/other group of frames
+
+### A new GstMultiviewMeta
+This provides a place to describe all provided views in a buffer / stream,
+and through Meta negotiation to inform decoders about which views to decode if
+not all are wanted.
+
+* Logical labels/names and mapping to GstVideoMeta numbers
+* Standard view labels LEFT/RIGHT, and non-standard ones (strings)
+
+Outputting stereo content
+-------------------------
+The initial implementation for output will be stereo content in glimagesink
+
+### Output Considerations with OpenGL
+* If we have support for stereo GL buffer formats, we can output separate left/right eye images and let the hardware take care of display.
+* Otherwise, glimagesink needs to render one window with left/right in a suitable frame packing
+ and that will only show correctly in fullscreen on a device set for the right 3D packing -> requires app intervention to set the video mode.
+* Which could be done manually on the TV, or with HDMI 1.4 by setting the right video mode for the screen to inform the TV or third option, we
+ support rendering to two separate overlay areas on the screen - one for left eye, one for right which can be supported using the 'splitter' element and 2 output sinks or, better, add a 2nd window overlay for split stereo output
+* Intel hardware doesn't do stereo GL buffers - only nvidia and AMD, so initial implementation won't include that
+
+## Other elements for handling multiview content
+* videooverlay interface extensions
+ * Element message to communicate the presence of stereoscopic information to the app
+ * New API for the app to set rendering options for stereo/multiview content
+ * This might be best implemented as a **multiview-disposition GstContext**, so that
+ the pipeline can share app preferences for (in particular) downmixing
+ to mono for output, or in the sink
+* Converter element
+ * convert different view layouts
+ * Render to anaglyphs of different types (magenta/green, red/blue, etc) and output as mono
+* Mixer element
+ * take 2 video streams and output as stereo
+ * later take n video streams
+ * share code with the converter, it just takes input from n pads instead of one.
+* Splitter element
+ * Output one pad per view
+
+### Implementing MVC handling in decoders / parsers (and encoders)
+Things to do to implement MVC handling
+
+1. Parsing SEI in h264parse and setting caps (patches available in
+ bugzilla for parsing, see below)
+2. Integrate gstreamer-vaapi MVC support with this proposal
+3. Help with [libav MVC implementation](https://wiki.libav.org/Blueprint/MVC)
+4. generating SEI in H.264 encoder
+5. Support for MPEG2 MVC extensions
+
+### Relevant bugs
+[bug 685215](https://bugzilla.gnome.org/show_bug.cgi?id=685215) - codecparser h264: Add initial MVC parser
+[bug 696135](https://bugzilla.gnome.org/show_bug.cgi?id=696135) - h264parse: Add mvc stream parsing support
+[bug 732267](https://bugzilla.gnome.org/show_bug.cgi?id=732267) - h264parse: extract base stream from MVC or SVC encoded streams
+