[media] cx88: don't break long lines
authorMauro Carvalho Chehab <mchehab@s-opensource.com>
Tue, 18 Oct 2016 19:44:04 +0000 (17:44 -0200)
committerMauro Carvalho Chehab <mchehab@s-opensource.com>
Fri, 21 Oct 2016 11:09:41 +0000 (09:09 -0200)
Due to the 80-cols restrictions, and latter due to checkpatch
warnings, several strings were broken into multiple lines. This
is not considered a good practice anymore, as it makes harder
to grep for strings at the source code.

As we're right now fixing other drivers due to KERN_CONT, we need
to be able to identify what printk strings don't end with a "\n".
It is a way easier to detect those if we don't break long lines.

So, join those continuation lines.

The patch was generated via the script below, and manually
adjusted if needed.

</script>
use Text::Tabs;
while (<>) {
if ($next ne "") {
$c=$_;
if ($c =~ /^\s+\"(.*)/) {
$c2=$1;
$next =~ s/\"\n$//;
$n = expand($next);
$funpos = index($n, '(');
$pos = index($c2, '",');
if ($funpos && $pos > 0) {
$s1 = substr $c2, 0, $pos + 2;
$s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2;
$s2 =~ s/^\s+//;

$s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne "");

print unexpand("$next$s1\n");
print unexpand("$s2\n") if ($s2 ne "");
} else {
print "$next$c2\n";
}
$next="";
next;
} else {
print $next;
}
$next="";
} else {
if (m/\"$/) {
if (!m/\\n\"$/) {
$next=$_;
next;
}
}
}
print $_;
}
</script>

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
drivers/media/pci/cx88/cx88-alsa.c
drivers/media/pci/cx88/cx88-cards.c
drivers/media/pci/cx88/cx88-dsp.c
drivers/media/pci/cx88/cx88-dvb.c
drivers/media/pci/cx88/cx88-i2c.c
drivers/media/pci/cx88/cx88-mpeg.c
drivers/media/pci/cx88/cx88-tvaudio.c
drivers/media/pci/cx88/cx88-video.c

index 723f064..495f9a0 100644 (file)
@@ -120,9 +120,7 @@ MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(CX88_VERSION);
 
-MODULE_SUPPORTED_DEVICE("{{Conexant,23881},"
-                       "{{Conexant,23882},"
-                       "{{Conexant,23883}");
+MODULE_SUPPORTED_DEVICE("{{Conexant,23881},{{Conexant,23882},{{Conexant,23883}");
 static unsigned int debug;
 module_param(debug,int,0644);
 MODULE_PARM_DESC(debug,"enable debug messages");
@@ -154,8 +152,8 @@ static int _cx88_start_audio_dma(snd_cx88_card_t *chip)
        cx_write(MO_AUDD_GPCNTRL, GP_COUNT_CONTROL_RESET);
        atomic_set(&chip->count, 0);
 
-       dprintk(1, "Start audio DMA, %d B/line, %d lines/FIFO, %d periods, %d "
-               "byte buffer\n", buf->bpl, cx_read(audio_ch->cmds_start + 8)>>1,
+       dprintk(1, "Start audio DMA, %d B/line, %d lines/FIFO, %d periods, %d byte buffer\n",
+               buf->bpl, cx_read(audio_ch->cmds_start + 8)>>1,
                chip->num_periods, buf->bpl * chip->num_periods);
 
        /* Enables corresponding bits at AUD_INT_STAT */
@@ -425,8 +423,7 @@ static int snd_cx88_pcm_open(struct snd_pcm_substream *substream)
        int err;
 
        if (!chip) {
-               printk(KERN_ERR "BUG: cx88 can't find device struct."
-                               " Can't proceed with open\n");
+               printk(KERN_ERR "BUG: cx88 can't find device struct. Can't proceed with open\n");
                return -ENODEV;
        }
 
@@ -914,8 +911,8 @@ static int snd_cx88_create(struct snd_card *card, struct pci_dev *pci,
        /* print pci info */
        pci_read_config_byte(pci, PCI_LATENCY_TIMER, &pci_lat);
 
-       dprintk(1,"ALSA %s/%i: found at %s, rev: %d, irq: %d, "
-              "latency: %d, mmio: 0x%llx\n", core->name, devno,
+       dprintk(1, "ALSA %s/%i: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n",
+               core->name, devno,
               pci_name(pci), pci->revision, pci->irq,
               pci_lat, (unsigned long long)pci_resource_start(pci,0));
 
index 8f2556e..31295b3 100644 (file)
@@ -2847,8 +2847,7 @@ static void leadtek_eeprom(struct cx88_core *core, u8 *eeprom_data)
                break;
        }
 
-       info_printk(core, "Leadtek Winfast 2000XP Expert config: "
-                   "tuner=%d, eeprom[0]=0x%02x\n",
+       info_printk(core, "Leadtek Winfast 2000XP Expert config: tuner=%d, eeprom[0]=0x%02x\n",
                    core->board.tuner_type, eeprom_data[0]);
 }
 
@@ -3107,8 +3106,8 @@ static void dvico_fusionhdtv_hybrid_init(struct cx88_core *core)
                msg.len = (i != 12 ? 5 : 2);
                err = i2c_transfer(&core->i2c_adap, &msg, 1);
                if (err != 1) {
-                       warn_printk(core, "dvico_fusionhdtv_hybrid_init buf %d "
-                                         "failed (err = %d)!\n", i, err);
+                       warn_printk(core, "dvico_fusionhdtv_hybrid_init buf %d failed (err = %d)!\n",
+                                   i, err);
                        return;
                }
        }
@@ -3284,8 +3283,7 @@ static void cx88_card_list(struct cx88_core *core, struct pci_dev *pci)
                       "%s: version might help as well.\n",
                       core->name,core->name,core->name,core->name);
        }
-       err_printk(core, "Here is a list of valid choices for the card=<n> "
-                  "insmod option:\n");
+       err_printk(core, "Here is a list of valid choices for the card=<n> insmod option:\n");
        for (i = 0; i < ARRAY_SIZE(cx88_boards); i++)
                printk(KERN_ERR "%s:    card=%d -> %s\n",
                       core->name, i, cx88_boards[i].name);
@@ -3510,8 +3508,8 @@ static void cx88_card_setup(struct cx88_core *core)
                        for (i = 0; i < ARRAY_SIZE(buffer); i++)
                                if (2 != i2c_master_send(&core->i2c_client,
                                                        buffer[i],2))
-                                       warn_printk(core, "Unable to enable "
-                                                   "tuner(%i).\n", i);
+                                       warn_printk(core, "Unable to enable tuner(%i).\n",
+                                                   i);
                }
                break;
        case CX88_BOARD_MSI_TVANYWHERE_MASTER:
index a990726..7fafd13 100644 (file)
@@ -186,8 +186,8 @@ static s32 detect_a2_a2m_eiaj(struct cx88_core *core, s16 x[], u32 N)
        dual    = freq_magnitude(x, N, dual_freq);
        noise   = noise_magnitude(x, N, FREQ_NOISE_START, FREQ_NOISE_END);
 
-       dprintk(1, "detect a2/a2m/eiaj: carrier=%d, stereo=%d, dual=%d, "
-                  "noise=%d\n", carrier, stereo, dual, noise);
+       dprintk(1, "detect a2/a2m/eiaj: carrier=%d, stereo=%d, dual=%d, noise=%d\n",
+               carrier, stereo, dual, noise);
 
        if (stereo > dual)
                ret = V4L2_TUNER_SUB_STEREO;
@@ -222,8 +222,8 @@ static s32 detect_btsc(struct cx88_core *core, s16 x[], u32 N)
        s32 sap = freq_magnitude(x, N, FREQ_BTSC_SAP);
        s32 dual_ref = freq_magnitude(x, N, FREQ_BTSC_DUAL_REF);
        s32 dual = freq_magnitude(x, N, FREQ_BTSC_DUAL);
-       dprintk(1, "detect btsc: dual_ref=%d, dual=%d, sap_ref=%d, sap=%d"
-                  "\n", dual_ref, dual, sap_ref, sap);
+       dprintk(1, "detect btsc: dual_ref=%d, dual=%d, sap_ref=%d, sap=%d\n",
+               dual_ref, dual, sap_ref, sap);
        /* FIXME: Currently not supported */
        return UNSET;
 }
@@ -241,8 +241,8 @@ static s16 *read_rds_samples(struct cx88_core *core, u32 *N)
        u32 current_address = cx_read(srch->ptr1_reg);
        u32 offset = (current_address - srch->fifo_start + bpl);
 
-       dprintk(1, "read RDS samples: current_address=%08x (offset=%08x), "
-               "sample_count=%d, aud_intstat=%08x\n", current_address,
+       dprintk(1, "read RDS samples: current_address=%08x (offset=%08x), sample_count=%d, aud_intstat=%08x\n",
+               current_address,
                current_address - srch->fifo_start, sample_count,
                cx_read(MO_AUD_INTSTAT));
 
index ac2392d..fe5fd2a 100644 (file)
@@ -625,8 +625,7 @@ static int attach_xc3028(u8 addr, struct cx8802_dev *dev)
                return -EINVAL;
 
        if (!fe0->dvb.frontend) {
-               printk(KERN_ERR "%s/2: dvb frontend not attached. "
-                               "Can't attach xc3028\n",
+               printk(KERN_ERR "%s/2: dvb frontend not attached. Can't attach xc3028\n",
                       dev->core->name);
                return -EINVAL;
        }
@@ -665,8 +664,7 @@ static int attach_xc4000(struct cx8802_dev *dev, struct xc4000_config *cfg)
                return -EINVAL;
 
        if (!fe0->dvb.frontend) {
-               printk(KERN_ERR "%s/2: dvb frontend not attached. "
-                               "Can't attach xc4000\n",
+               printk(KERN_ERR "%s/2: dvb frontend not attached. Can't attach xc4000\n",
                       dev->core->name);
                return -EINVAL;
        }
index cf2d696..804f741 100644 (file)
@@ -45,8 +45,7 @@ MODULE_PARM_DESC(i2c_scan,"scan i2c bus at insmod time");
 
 static unsigned int i2c_udelay = 5;
 module_param(i2c_udelay, int, 0644);
-MODULE_PARM_DESC(i2c_udelay,"i2c delay at insmod time, in usecs "
-               "(should be 5 or higher). Lower value means higher bus speed.");
+MODULE_PARM_DESC(i2c_udelay, "i2c delay at insmod time, in usecs (should be 5 or higher). Lower value means higher bus speed.");
 
 #define dprintk(level,fmt, arg...)     if (i2c_debug >= level) \
        printk(KERN_DEBUG "%s: " fmt, core->name , ## arg)
index 245357a..86b46b6 100644 (file)
@@ -401,8 +401,8 @@ static int cx8802_init_common(struct cx8802_dev *dev)
 
        dev->pci_rev = dev->pci->revision;
        pci_read_config_byte(dev->pci, PCI_LATENCY_TIMER,  &dev->pci_lat);
-       printk(KERN_INFO "%s/2: found at %s, rev: %d, irq: %d, "
-              "latency: %d, mmio: 0x%llx\n", dev->core->name,
+       printk(KERN_INFO "%s/2: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n",
+              dev->core->name,
               pci_name(dev->pci), dev->pci_rev, dev->pci->irq,
               dev->pci_lat,(unsigned long long)pci_resource_start(dev->pci,0));
 
@@ -690,8 +690,8 @@ int cx8802_unregister_driver(struct cx8802_driver *drv)
                                list_del(&d->drvlist);
                                kfree(d);
                        } else
-                               printk(KERN_ERR "%s/2: cx8802 driver remove "
-                                      "failed (%d)\n", dev->core->name, err);
+                               printk(KERN_ERR "%s/2: cx8802 driver remove failed (%d)\n",
+                                      dev->core->name, err);
                }
 
                mutex_unlock(&dev->core->lock);
@@ -768,8 +768,7 @@ static void cx8802_remove(struct pci_dev *pci_dev)
                struct cx8802_driver *drv, *tmp;
                int err;
 
-               printk(KERN_WARNING "%s/2: Trying to remove cx8802 driver "
-                      "while cx8802 sub-drivers still loaded?!\n",
+               printk(KERN_WARNING "%s/2: Trying to remove cx8802 driver while cx8802 sub-drivers still loaded?!\n",
                       dev->core->name);
 
                list_for_each_entry_safe(drv, tmp, &dev->drvlist, drvlist) {
@@ -777,8 +776,8 @@ static void cx8802_remove(struct pci_dev *pci_dev)
                        if (err == 0) {
                                list_del(&drv->drvlist);
                        } else
-                               printk(KERN_ERR "%s/2: cx8802 driver remove "
-                                      "failed (%d)\n", dev->core->name, err);
+                               printk(KERN_ERR "%s/2: cx8802 driver remove failed (%d)\n",
+                                      dev->core->name, err);
                        kfree(drv);
                }
        }
index 6bbce6a..dd8e6f3 100644 (file)
@@ -62,8 +62,7 @@ MODULE_PARM_DESC(always_analog,"force analog audio out");
 
 static unsigned int radio_deemphasis;
 module_param(radio_deemphasis,int,0644);
-MODULE_PARM_DESC(radio_deemphasis, "Radio deemphasis time constant, "
-                "0=None, 1=50us (elsewhere), 2=75us (USA)");
+MODULE_PARM_DESC(radio_deemphasis, "Radio deemphasis time constant, 0=None, 1=50us (elsewhere), 2=75us (USA)");
 
 #define dprintk(fmt, arg...)   if (audio_debug) \
        printk(KERN_DEBUG "%s/0: " fmt, core->name , ## arg)
@@ -976,8 +975,7 @@ void cx88_set_stereo(struct cx88_core *core, u32 mode, int manual)
        }
 
        if (UNSET != ctl) {
-               dprintk("cx88_set_stereo: mask 0x%x, ctl 0x%x "
-                       "[status=0x%x,ctl=0x%x,vol=0x%x]\n",
+               dprintk("cx88_set_stereo: mask 0x%x, ctl 0x%x [status=0x%x,ctl=0x%x,vol=0x%x]\n",
                        mask, ctl, cx_read(AUD_STATUS),
                        cx_read(AUD_CTL), cx_sread(SHADOW_AUD_VOL_CTL));
                cx_andor(AUD_CTL, mask, ctl);
index d83eb3b..418e2db 100644 (file)
@@ -1307,8 +1307,8 @@ static int cx8800_initdev(struct pci_dev *pci_dev,
        /* print pci info */
        dev->pci_rev = pci_dev->revision;
        pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER,  &dev->pci_lat);
-       printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, "
-              "latency: %d, mmio: 0x%llx\n", core->name,
+       printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n",
+              core->name,
               pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
               dev->pci_lat,(unsigned long long)pci_resource_start(pci_dev,0));