ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver
authorFreddy Xin <freddy@asix.com.tw>
Sat, 2 Mar 2013 00:41:11 +0000 (00:41 +0000)
committerDavid S. Miller <davem@davemloft.net>
Sun, 3 Mar 2013 06:43:47 +0000 (01:43 -0500)
This is a resubmission.
Added kfree() in ax88179_get_eeprom to prevent memory leakage.
Modified "__le16 rxctl" to "u16 rxctl" in "struct ax88179_data" and removed pointless casts.
Removed asix_init and asix_exit functions and added "module_usb_driver(ax88179_178a_driver)".
Fixed endianness issue on big endian systems and verified this driver on iBook G4.
Removed steps that change net->features in ax88179_set_features function.
Added "const" to ethtool_ops structure and fixed the coding style of AX88179_BULKIN_SIZE array.
Fixed the issue that the default MTU is not 1500.
Added ax88179_change_mtu function and enabled the hardware jumbo frame function to support an
MTU higher than 1500.
Fixed indentation and empty line coding style errors.
The _nopm version usb functions were added to access register in suspend and resume functions.
Serveral variables allocted dynamically were removed and replaced by stack variables.
ax88179_get_eeprom were modified from asix_get_eeprom in asix_common.

This patch adds a driver for ASIX's AX88179 family of USB 3.0/2.0
to gigabit ethernet adapters. It's based on the AX88xxx driver but
the usb commands used to access registers for AX88179 are completely different.
This driver had been verified on x86 system with AX88179/AX88178A and
Sitcomm LN-032 USB dongles.

Signed-off-by: Freddy Xin <freddy@asix.com.tw>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/usb/Kconfig
drivers/net/usb/Makefile
drivers/net/usb/ax88179_178a.c [new file with mode: 0644]

index da92ed3..3b6e9b8 100644 (file)
@@ -156,6 +156,24 @@ config USB_NET_AX8817X
          This driver creates an interface named "ethX", where X depends on
          what other networking devices you have in use.
 
+config USB_NET_AX88179_178A
+       tristate "ASIX AX88179/178A USB 3.0/2.0 to Gigabit Ethernet"
+       depends on USB_USBNET
+       select CRC32
+       select PHYLIB
+       default y
+       help
+         This option adds support for ASIX AX88179 based USB 3.0/2.0
+         to Gigabit Ethernet adapters.
+
+         This driver should work with at least the following devices:
+           * ASIX AX88179
+           * ASIX AX88178A
+           * Sitcomm LN-032
+
+         This driver creates an interface named "ethX", where X depends on
+         what other networking devices you have in use.
+
 config USB_NET_CDCETHER
        tristate "CDC Ethernet support (smart devices such as cable modems)"
        depends on USB_USBNET
index 4786913..119b06c 100644 (file)
@@ -9,6 +9,7 @@ obj-$(CONFIG_USB_RTL8150)       += rtl8150.o
 obj-$(CONFIG_USB_HSO)          += hso.o
 obj-$(CONFIG_USB_NET_AX8817X)  += asix.o
 asix-y := asix_devices.o asix_common.o ax88172a.o
+obj-$(CONFIG_USB_NET_AX88179_178A)      += ax88179_178a.o
 obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o
 obj-$(CONFIG_USB_NET_CDC_EEM)  += cdc_eem.o
 obj-$(CONFIG_USB_NET_DM9601)   += dm9601.o
diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
new file mode 100644 (file)
index 0000000..71c27d8
--- /dev/null
@@ -0,0 +1,1448 @@
+/*
+ * ASIX AX88179/178A USB 3.0/2.0 to Gigabit Ethernet Devices
+ *
+ * Copyright (C) 2011-2013 ASIX
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/etherdevice.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/usbnet.h>
+
+#define AX88179_PHY_ID                         0x03
+#define AX_EEPROM_LEN                          0x100
+#define AX88179_EEPROM_MAGIC                   0x17900b95
+#define AX_MCAST_FLTSIZE                       8
+#define AX_MAX_MCAST                           64
+#define AX_INT_PPLS_LINK                       ((u32)BIT(16))
+#define AX_RXHDR_L4_TYPE_MASK                  0x1c
+#define AX_RXHDR_L4_TYPE_UDP                   4
+#define AX_RXHDR_L4_TYPE_TCP                   16
+#define AX_RXHDR_L3CSUM_ERR                    2
+#define AX_RXHDR_L4CSUM_ERR                    1
+#define AX_RXHDR_CRC_ERR                       ((u32)BIT(31))
+#define AX_RXHDR_DROP_ERR                      ((u32)BIT(30))
+#define AX_ACCESS_MAC                          0x01
+#define AX_ACCESS_PHY                          0x02
+#define AX_ACCESS_EEPROM                       0x04
+#define AX_ACCESS_EFUS                         0x05
+#define AX_PAUSE_WATERLVL_HIGH                 0x54
+#define AX_PAUSE_WATERLVL_LOW                  0x55
+
+#define PHYSICAL_LINK_STATUS                   0x02
+       #define AX_USB_SS               0x04
+       #define AX_USB_HS               0x02
+
+#define GENERAL_STATUS                         0x03
+/* Check AX88179 version. UA1:Bit2 = 0,  UA2:Bit2 = 1 */
+       #define AX_SECLD                0x04
+
+#define AX_SROM_ADDR                           0x07
+#define AX_SROM_CMD                            0x0a
+       #define EEP_RD                  0x04
+       #define EEP_BUSY                0x10
+
+#define AX_SROM_DATA_LOW                       0x08
+#define AX_SROM_DATA_HIGH                      0x09
+
+#define AX_RX_CTL                              0x0b
+       #define AX_RX_CTL_DROPCRCERR    0x0100
+       #define AX_RX_CTL_IPE           0x0200
+       #define AX_RX_CTL_START         0x0080
+       #define AX_RX_CTL_AP            0x0020
+       #define AX_RX_CTL_AM            0x0010
+       #define AX_RX_CTL_AB            0x0008
+       #define AX_RX_CTL_AMALL         0x0002
+       #define AX_RX_CTL_PRO           0x0001
+       #define AX_RX_CTL_STOP          0x0000
+
+#define AX_NODE_ID                             0x10
+#define AX_MULFLTARY                           0x16
+
+#define AX_MEDIUM_STATUS_MODE                  0x22
+       #define AX_MEDIUM_GIGAMODE      0x01
+       #define AX_MEDIUM_FULL_DUPLEX   0x02
+       #define AX_MEDIUM_ALWAYS_ONE    0x04
+       #define AX_MEDIUM_EN_125MHZ     0x08
+       #define AX_MEDIUM_RXFLOW_CTRLEN 0x10
+       #define AX_MEDIUM_TXFLOW_CTRLEN 0x20
+       #define AX_MEDIUM_RECEIVE_EN    0x100
+       #define AX_MEDIUM_PS            0x200
+       #define AX_MEDIUM_JUMBO_EN      0x8040
+
+#define AX_MONITOR_MOD                         0x24
+       #define AX_MONITOR_MODE_RWLC    0x02
+       #define AX_MONITOR_MODE_RWMP    0x04
+       #define AX_MONITOR_MODE_PMEPOL  0x20
+       #define AX_MONITOR_MODE_PMETYPE 0x40
+
+#define AX_GPIO_CTRL                           0x25
+       #define AX_GPIO_CTRL_GPIO3EN    0x80
+       #define AX_GPIO_CTRL_GPIO2EN    0x40
+       #define AX_GPIO_CTRL_GPIO1EN    0x20
+
+#define AX_PHYPWR_RSTCTL                       0x26
+       #define AX_PHYPWR_RSTCTL_BZ     0x0010
+       #define AX_PHYPWR_RSTCTL_IPRL   0x0020
+       #define AX_PHYPWR_RSTCTL_AT     0x1000
+
+#define AX_RX_BULKIN_QCTRL                     0x2e
+#define AX_CLK_SELECT                          0x33
+       #define AX_CLK_SELECT_BCS       0x01
+       #define AX_CLK_SELECT_ACS       0x02
+       #define AX_CLK_SELECT_ULR       0x08
+
+#define AX_RXCOE_CTL                           0x34
+       #define AX_RXCOE_IP             0x01
+       #define AX_RXCOE_TCP            0x02
+       #define AX_RXCOE_UDP            0x04
+       #define AX_RXCOE_TCPV6          0x20
+       #define AX_RXCOE_UDPV6          0x40
+
+#define AX_TXCOE_CTL                           0x35
+       #define AX_TXCOE_IP             0x01
+       #define AX_TXCOE_TCP            0x02
+       #define AX_TXCOE_UDP            0x04
+       #define AX_TXCOE_TCPV6          0x20
+       #define AX_TXCOE_UDPV6          0x40
+
+#define AX_LEDCTRL                             0x73
+
+#define GMII_PHY_PHYSR                         0x11
+       #define GMII_PHY_PHYSR_SMASK    0xc000
+       #define GMII_PHY_PHYSR_GIGA     0x8000
+       #define GMII_PHY_PHYSR_100      0x4000
+       #define GMII_PHY_PHYSR_FULL     0x2000
+       #define GMII_PHY_PHYSR_LINK     0x400
+
+#define GMII_LED_ACT                           0x1a
+       #define GMII_LED_ACTIVE_MASK    0xff8f
+       #define GMII_LED0_ACTIVE        BIT(4)
+       #define GMII_LED1_ACTIVE        BIT(5)
+       #define GMII_LED2_ACTIVE        BIT(6)
+
+#define GMII_LED_LINK                          0x1c
+       #define GMII_LED_LINK_MASK      0xf888
+       #define GMII_LED0_LINK_10       BIT(0)
+       #define GMII_LED0_LINK_100      BIT(1)
+       #define GMII_LED0_LINK_1000     BIT(2)
+       #define GMII_LED1_LINK_10       BIT(4)
+       #define GMII_LED1_LINK_100      BIT(5)
+       #define GMII_LED1_LINK_1000     BIT(6)
+       #define GMII_LED2_LINK_10       BIT(8)
+       #define GMII_LED2_LINK_100      BIT(9)
+       #define GMII_LED2_LINK_1000     BIT(10)
+       #define LED0_ACTIVE             BIT(0)
+       #define LED0_LINK_10            BIT(1)
+       #define LED0_LINK_100           BIT(2)
+       #define LED0_LINK_1000          BIT(3)
+       #define LED0_FD                 BIT(4)
+       #define LED0_USB3_MASK          0x001f
+       #define LED1_ACTIVE             BIT(5)
+       #define LED1_LINK_10            BIT(6)
+       #define LED1_LINK_100           BIT(7)
+       #define LED1_LINK_1000          BIT(8)
+       #define LED1_FD                 BIT(9)
+       #define LED1_USB3_MASK          0x03e0
+       #define LED2_ACTIVE             BIT(10)
+       #define LED2_LINK_1000          BIT(13)
+       #define LED2_LINK_100           BIT(12)
+       #define LED2_LINK_10            BIT(11)
+       #define LED2_FD                 BIT(14)
+       #define LED_VALID               BIT(15)
+       #define LED2_USB3_MASK          0x7c00
+
+#define GMII_PHYPAGE                           0x1e
+#define GMII_PHY_PAGE_SELECT                   0x1f
+       #define GMII_PHY_PGSEL_EXT      0x0007
+       #define GMII_PHY_PGSEL_PAGE0    0x0000
+
+struct ax88179_data {
+       u16 rxctl;
+       u16 reserved;
+};
+
+struct ax88179_int_data {
+       __le32 intdata1;
+       __le32 intdata2;
+};
+
+static const struct {
+       unsigned char ctrl, timer_l, timer_h, size, ifg;
+} AX88179_BULKIN_SIZE[] =      {
+       {7, 0x4f, 0,    0x12, 0xff},
+       {7, 0x20, 3,    0x16, 0xff},
+       {7, 0xae, 7,    0x18, 0xff},
+       {7, 0xcc, 0x4c, 0x18, 8},
+};
+
+static int __ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+                             u16 size, void *data, int in_pm)
+{
+       int ret;
+       int (*fn)(struct usbnet *, u8, u8, u16, u16, void *, u16);
+
+       BUG_ON(!dev);
+
+       if (!in_pm)
+               fn = usbnet_read_cmd;
+       else
+               fn = usbnet_read_cmd_nopm;
+
+       ret = fn(dev, cmd, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+                value, index, data, size);
+
+       if (unlikely(ret < 0))
+               netdev_warn(dev->net, "Failed to read reg index 0x%04x: %d\n",
+                           index, ret);
+
+       return ret;
+}
+
+static int __ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+                              u16 size, void *data, int in_pm)
+{
+       int ret;
+       int (*fn)(struct usbnet *, u8, u8, u16, u16, const void *, u16);
+
+       BUG_ON(!dev);
+
+       if (!in_pm)
+               fn = usbnet_write_cmd;
+       else
+               fn = usbnet_write_cmd_nopm;
+
+       ret = fn(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+                value, index, data, size);
+
+       if (unlikely(ret < 0))
+               netdev_warn(dev->net, "Failed to write reg index 0x%04x: %d\n",
+                           index, ret);
+
+       return ret;
+}
+
+static void ax88179_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value,
+                                   u16 index, u16 size, void *data)
+{
+       u16 buf;
+
+       if (2 == size) {
+               buf = *((u16 *)data);
+               cpu_to_le16s(&buf);
+               usbnet_write_cmd_async(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR |
+                                      USB_RECIP_DEVICE, value, index, &buf,
+                                      size);
+       } else {
+               usbnet_write_cmd_async(dev, cmd, USB_DIR_OUT | USB_TYPE_VENDOR |
+                                      USB_RECIP_DEVICE, value, index, data,
+                                      size);
+       }
+}
+
+static int ax88179_read_cmd_nopm(struct usbnet *dev, u8 cmd, u16 value,
+                                u16 index, u16 size, void *data)
+{
+       int ret;
+
+       if (2 == size) {
+               u16 buf;
+               ret = __ax88179_read_cmd(dev, cmd, value, index, size, &buf, 1);
+               le16_to_cpus(&buf);
+               *((u16 *)data) = buf;
+       } else if (4 == size) {
+               u32 buf;
+               ret = __ax88179_read_cmd(dev, cmd, value, index, size, &buf, 1);
+               le32_to_cpus(&buf);
+               *((u32 *)data) = buf;
+       } else {
+               ret = __ax88179_read_cmd(dev, cmd, value, index, size, data, 1);
+       }
+
+       return ret;
+}
+
+static int ax88179_write_cmd_nopm(struct usbnet *dev, u8 cmd, u16 value,
+                                 u16 index, u16 size, void *data)
+{
+       int ret;
+
+       if (2 == size) {
+               u16 buf;
+               buf = *((u16 *)data);
+               cpu_to_le16s(&buf);
+               ret = __ax88179_write_cmd(dev, cmd, value, index,
+                                         size, &buf, 1);
+       } else {
+               ret = __ax88179_write_cmd(dev, cmd, value, index,
+                                         size, data, 1);
+       }
+
+       return ret;
+}
+
+static int ax88179_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+                           u16 size, void *data)
+{
+       int ret;
+
+       if (2 == size) {
+               u16 buf;
+               ret = __ax88179_read_cmd(dev, cmd, value, index, size, &buf, 0);
+               le16_to_cpus(&buf);
+               *((u16 *)data) = buf;
+       } else if (4 == size) {
+               u32 buf;
+               ret = __ax88179_read_cmd(dev, cmd, value, index, size, &buf, 0);
+               le32_to_cpus(&buf);
+               *((u32 *)data) = buf;
+       } else {
+               ret = __ax88179_read_cmd(dev, cmd, value, index, size, data, 0);
+       }
+
+       return ret;
+}
+
+static int ax88179_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
+                            u16 size, void *data)
+{
+       int ret;
+
+       if (2 == size) {
+               u16 buf;
+               buf = *((u16 *)data);
+               cpu_to_le16s(&buf);
+               ret = __ax88179_write_cmd(dev, cmd, value, index,
+                                         size, &buf, 0);
+       } else {
+               ret = __ax88179_write_cmd(dev, cmd, value, index,
+                                         size, data, 0);
+       }
+
+       return ret;
+}
+
+static void ax88179_status(struct usbnet *dev, struct urb *urb)
+{
+       struct ax88179_int_data *event;
+       u32 link;
+
+       if (urb->actual_length < 8)
+               return;
+
+       event = urb->transfer_buffer;
+       le32_to_cpus((void *)&event->intdata1);
+
+       link = (((__force u32)event->intdata1) & AX_INT_PPLS_LINK) >> 16;
+
+       if (netif_carrier_ok(dev->net) != link) {
+               if (link)
+                       usbnet_defer_kevent(dev, EVENT_LINK_RESET);
+               else
+                       netif_carrier_off(dev->net);
+
+               netdev_info(dev->net, "ax88179 - Link status is: %d\n", link);
+       }
+}
+
+static int ax88179_mdio_read(struct net_device *netdev, int phy_id, int loc)
+{
+       struct usbnet *dev = netdev_priv(netdev);
+       u16 res;
+
+       ax88179_read_cmd(dev, AX_ACCESS_PHY, phy_id, (__u16)loc, 2, &res);
+       return res;
+}
+
+static void ax88179_mdio_write(struct net_device *netdev, int phy_id, int loc,
+                              int val)
+{
+       struct usbnet *dev = netdev_priv(netdev);
+       u16 res = (u16) val;
+
+       ax88179_write_cmd(dev, AX_ACCESS_PHY, phy_id, (__u16)loc, 2, &res);
+}
+
+static int ax88179_suspend(struct usb_interface *intf, pm_message_t message)
+{
+       struct usbnet *dev = usb_get_intfdata(intf);
+       u16 tmp16;
+       u8 tmp8;
+
+       usbnet_suspend(intf, message);
+
+       /* Disable RX path */
+       ax88179_read_cmd_nopm(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+                             2, 2, &tmp16);
+       tmp16 &= ~AX_MEDIUM_RECEIVE_EN;
+       ax88179_write_cmd_nopm(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+                              2, 2, &tmp16);
+
+       /* Force bulk-in zero length */
+       ax88179_read_cmd_nopm(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL,
+                             2, 2, &tmp16);
+
+       tmp16 |= AX_PHYPWR_RSTCTL_BZ | AX_PHYPWR_RSTCTL_IPRL;
+       ax88179_write_cmd_nopm(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL,
+                              2, 2, &tmp16);
+
+       /* change clock */
+       tmp8 = 0;
+       ax88179_write_cmd_nopm(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, &tmp8);
+
+       /* Configure RX control register => stop operation */
+       tmp16 = AX_RX_CTL_STOP;
+       ax88179_write_cmd_nopm(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, &tmp16);
+
+       return 0;
+}
+
+/* This function is used to enable the autodetach function. */
+/* This function is determined by offset 0x43 of EEPROM */
+static int ax88179_auto_detach(struct usbnet *dev, int in_pm)
+{
+       u16 tmp16;
+       u8 tmp8;
+       int (*fnr)(struct usbnet *, u8, u16, u16, u16, void *);
+       int (*fnw)(struct usbnet *, u8, u16, u16, u16, void *);
+
+       if (!in_pm) {
+               fnr = ax88179_read_cmd;
+               fnw = ax88179_write_cmd;
+       } else {
+               fnr = ax88179_read_cmd_nopm;
+               fnw = ax88179_write_cmd_nopm;
+       }
+
+       if (fnr(dev, AX_ACCESS_EEPROM, 0x43, 1, 2, &tmp16) < 0)
+               return 0;
+
+       if ((tmp16 == 0xFFFF) || (!(tmp16 & 0x0100)))
+               return 0;
+
+       /* Enable Auto Detach bit */
+       tmp8 = 0;
+       fnr(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, &tmp8);
+       tmp8 |= AX_CLK_SELECT_ULR;
+       fnw(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, &tmp8);
+
+       fnr(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, &tmp16);
+       tmp16 |= AX_PHYPWR_RSTCTL_AT;
+       fnw(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, &tmp16);
+
+       return 0;
+}
+
+static int ax88179_resume(struct usb_interface *intf)
+{
+       struct usbnet *dev = usb_get_intfdata(intf);
+       u16 tmp16;
+       u8 tmp8;
+
+       netif_carrier_off(dev->net);
+
+       /* Power up ethernet PHY */
+       tmp16 = 0;
+       ax88179_write_cmd_nopm(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL,
+                              2, 2, &tmp16);
+       udelay(1000);
+
+       tmp16 = AX_PHYPWR_RSTCTL_IPRL;
+       ax88179_write_cmd_nopm(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL,
+                              2, 2, &tmp16);
+       msleep(200);
+
+       /* Ethernet PHY Auto Detach*/
+       ax88179_auto_detach(dev, 1);
+
+       /* Enable clock */
+       ax88179_read_cmd_nopm(dev, AX_ACCESS_MAC,  AX_CLK_SELECT, 1, 1, &tmp8);
+       tmp8 |= AX_CLK_SELECT_ACS | AX_CLK_SELECT_BCS;
+       ax88179_write_cmd_nopm(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, &tmp8);
+       msleep(100);
+
+       /* Configure RX control register => start operation */
+       tmp16 = AX_RX_CTL_DROPCRCERR | AX_RX_CTL_IPE | AX_RX_CTL_START |
+               AX_RX_CTL_AP | AX_RX_CTL_AMALL | AX_RX_CTL_AB;
+       ax88179_write_cmd_nopm(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, &tmp16);
+
+       return usbnet_resume(intf);
+}
+
+static void
+ax88179_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+       struct usbnet *dev = netdev_priv(net);
+       u8 opt;
+
+       if (ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MONITOR_MOD,
+                            1, 1, &opt) < 0) {
+               wolinfo->supported = 0;
+               wolinfo->wolopts = 0;
+               return;
+       }
+
+       wolinfo->supported = WAKE_PHY | WAKE_MAGIC;
+       wolinfo->wolopts = 0;
+       if (opt & AX_MONITOR_MODE_RWLC)
+               wolinfo->wolopts |= WAKE_PHY;
+       if (opt & AX_MONITOR_MODE_RWMP)
+               wolinfo->wolopts |= WAKE_MAGIC;
+}
+
+static int
+ax88179_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo)
+{
+       struct usbnet *dev = netdev_priv(net);
+       u8 opt = 0;
+
+       if (wolinfo->wolopts & WAKE_PHY)
+               opt |= AX_MONITOR_MODE_RWLC;
+       if (wolinfo->wolopts & WAKE_MAGIC)
+               opt |= AX_MONITOR_MODE_RWMP;
+
+       if (ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MONITOR_MOD,
+                             1, 1, &opt) < 0)
+               return -EINVAL;
+
+       return 0;
+}
+
+static int ax88179_get_eeprom_len(struct net_device *net)
+{
+       return AX_EEPROM_LEN;
+}
+
+static int
+ax88179_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
+                  u8 *data)
+{
+       struct usbnet *dev = netdev_priv(net);
+       u16 *eeprom_buff;
+       int first_word, last_word;
+       int i, ret;
+
+       if (eeprom->len == 0)
+               return -EINVAL;
+
+       eeprom->magic = AX88179_EEPROM_MAGIC;
+
+       first_word = eeprom->offset >> 1;
+       last_word = (eeprom->offset + eeprom->len - 1) >> 1;
+       eeprom_buff = kmalloc(sizeof(u16) * (last_word - first_word + 1),
+                             GFP_KERNEL);
+       if (!eeprom_buff)
+               return -ENOMEM;
+
+       /* ax88179/178A returns 2 bytes from eeprom on read */
+       for (i = first_word; i <= last_word; i++) {
+               ret = __ax88179_read_cmd(dev, AX_ACCESS_EEPROM, i, 1, 2,
+                                        &eeprom_buff[i - first_word],
+                                        0);
+               if (ret < 0) {
+                       kfree(eeprom_buff);
+                       return -EIO;
+               }
+       }
+
+       memcpy(data, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len);
+       kfree(eeprom_buff);
+       return 0;
+}
+
+static int ax88179_get_settings(struct net_device *net, struct ethtool_cmd *cmd)
+{
+       struct usbnet *dev = netdev_priv(net);
+       return mii_ethtool_gset(&dev->mii, cmd);
+}
+
+static int ax88179_set_settings(struct net_device *net, struct ethtool_cmd *cmd)
+{
+       struct usbnet *dev = netdev_priv(net);
+       return mii_ethtool_sset(&dev->mii, cmd);
+}
+
+
+static int ax88179_ioctl(struct net_device *net, struct ifreq *rq, int cmd)
+{
+       struct usbnet *dev = netdev_priv(net);
+       return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL);
+}
+
+static const struct ethtool_ops ax88179_ethtool_ops = {
+       .get_link               = ethtool_op_get_link,
+       .get_msglevel           = usbnet_get_msglevel,
+       .set_msglevel           = usbnet_set_msglevel,
+       .get_wol                = ax88179_get_wol,
+       .set_wol                = ax88179_set_wol,
+       .get_eeprom_len         = ax88179_get_eeprom_len,
+       .get_eeprom             = ax88179_get_eeprom,
+       .get_settings           = ax88179_get_settings,
+       .set_settings           = ax88179_set_settings,
+       .nway_reset             = usbnet_nway_reset,
+};
+
+static void ax88179_set_multicast(struct net_device *net)
+{
+       struct usbnet *dev = netdev_priv(net);
+       struct ax88179_data *data = (struct ax88179_data *)dev->data;
+       u8 *m_filter = ((u8 *)dev->data) + 12;
+
+       data->rxctl = (AX_RX_CTL_START | AX_RX_CTL_AB | AX_RX_CTL_IPE);
+
+       if (net->flags & IFF_PROMISC) {
+               data->rxctl |= AX_RX_CTL_PRO;
+       } else if (net->flags & IFF_ALLMULTI ||
+                  netdev_mc_count(net) > AX_MAX_MCAST) {
+               data->rxctl |= AX_RX_CTL_AMALL;
+       } else if (netdev_mc_empty(net)) {
+               /* just broadcast and directed */
+       } else {
+               /* We use the 20 byte dev->data for our 8 byte filter buffer
+                * to avoid allocating memory that is tricky to free later
+                */
+               u32 crc_bits;
+               struct netdev_hw_addr *ha;
+
+               memset(m_filter, 0, AX_MCAST_FLTSIZE);
+
+               netdev_for_each_mc_addr(ha, net) {
+                       crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26;
+                       *(m_filter + (crc_bits >> 3)) |= (1 << (crc_bits & 7));
+               }
+
+               ax88179_write_cmd_async(dev, AX_ACCESS_MAC, AX_MULFLTARY,
+                                       AX_MCAST_FLTSIZE, AX_MCAST_FLTSIZE,
+                                       m_filter);
+
+               data->rxctl |= AX_RX_CTL_AM;
+       }
+
+       ax88179_write_cmd_async(dev, AX_ACCESS_MAC, AX_RX_CTL,
+                               2, 2, &data->rxctl);
+}
+
+static int
+ax88179_set_features(struct net_device *net, netdev_features_t features)
+{
+       u8 tmp;
+       struct usbnet *dev = netdev_priv(net);
+       netdev_features_t changed = net->features ^ features;
+
+       if (changed & NETIF_F_IP_CSUM) {
+               ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, &tmp);
+               tmp ^= AX_TXCOE_TCP | AX_TXCOE_UDP;
+               ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, &tmp);
+       }
+
+       if (changed & NETIF_F_IPV6_CSUM) {
+               ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, &tmp);
+               tmp ^= AX_TXCOE_TCPV6 | AX_TXCOE_UDPV6;
+               ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, &tmp);
+       }
+
+       if (changed & NETIF_F_RXCSUM) {
+               ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_RXCOE_CTL, 1, 1, &tmp);
+               tmp ^= AX_RXCOE_IP | AX_RXCOE_TCP | AX_RXCOE_UDP |
+                      AX_RXCOE_TCPV6 | AX_RXCOE_UDPV6;
+               ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RXCOE_CTL, 1, 1, &tmp);
+       }
+
+       return 0;
+}
+
+static int ax88179_change_mtu(struct net_device *net, int new_mtu)
+{
+       struct usbnet *dev = netdev_priv(net);
+       u16 tmp16;
+
+       if (new_mtu <= 0 || new_mtu > 4088)
+               return -EINVAL;
+
+       net->mtu = new_mtu;
+       dev->hard_mtu = net->mtu + net->hard_header_len;
+
+       if (net->mtu > 1500) {
+               ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+                                2, 2, &tmp16);
+               tmp16 |= AX_MEDIUM_JUMBO_EN;
+               ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+                                 2, 2, &tmp16);
+       } else {
+               ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+                                2, 2, &tmp16);
+               tmp16 &= ~AX_MEDIUM_JUMBO_EN;
+               ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+                                 2, 2, &tmp16);
+       }
+
+       return 0;
+}
+
+static int ax88179_set_mac_addr(struct net_device *net, void *p)
+{
+       struct usbnet *dev = netdev_priv(net);
+       struct sockaddr *addr = p;
+
+       if (netif_running(net))
+               return -EBUSY;
+       if (!is_valid_ether_addr(addr->sa_data))
+               return -EADDRNOTAVAIL;
+
+       memcpy(net->dev_addr, addr->sa_data, ETH_ALEN);
+
+       /* Set the MAC address */
+       return ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_NODE_ID, ETH_ALEN,
+                                ETH_ALEN, net->dev_addr);
+}
+
+static const struct net_device_ops ax88179_netdev_ops = {
+       .ndo_open               = usbnet_open,
+       .ndo_stop               = usbnet_stop,
+       .ndo_start_xmit         = usbnet_start_xmit,
+       .ndo_tx_timeout         = usbnet_tx_timeout,
+       .ndo_change_mtu         = ax88179_change_mtu,
+       .ndo_set_mac_address    = ax88179_set_mac_addr,
+       .ndo_validate_addr      = eth_validate_addr,
+       .ndo_do_ioctl           = ax88179_ioctl,
+       .ndo_set_rx_mode        = ax88179_set_multicast,
+       .ndo_set_features       = ax88179_set_features,
+};
+
+static int ax88179_check_eeprom(struct usbnet *dev)
+{
+       u8 i, buf, eeprom[20];
+       u16 csum, delay = HZ / 10;
+       unsigned long jtimeout;
+
+       /* Read EEPROM content */
+       for (i = 0; i < 6; i++) {
+               buf = i;
+               if (ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_SROM_ADDR,
+                                     1, 1, &buf) < 0)
+                       return -EINVAL;
+
+               buf = EEP_RD;
+               if (ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_SROM_CMD,
+                                     1, 1, &buf) < 0)
+                       return -EINVAL;
+
+               jtimeout = jiffies + delay;
+               do {
+                       ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_SROM_CMD,
+                                        1, 1, &buf);
+
+                       if (time_after(jiffies, jtimeout))
+                               return -EINVAL;
+
+               } while (buf & EEP_BUSY);
+
+               __ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_SROM_DATA_LOW,
+                                  2, 2, &eeprom[i * 2], 0);
+
+               if ((i == 0) && (eeprom[0] == 0xFF))
+                       return -EINVAL;
+       }
+
+       csum = eeprom[6] + eeprom[7] + eeprom[8] + eeprom[9];
+       csum = (csum >> 8) + (csum & 0xff);
+       if ((csum + eeprom[10]) != 0xff)
+               return -EINVAL;
+
+       return 0;
+}
+
+static int ax88179_check_efuse(struct usbnet *dev, u16 *ledmode)
+{
+       u8      i;
+       u8      efuse[64];
+       u16     csum = 0;
+
+       if (ax88179_read_cmd(dev, AX_ACCESS_EFUS, 0, 64, 64, efuse) < 0)
+               return -EINVAL;
+
+       if (*efuse == 0xFF)
+               return -EINVAL;
+
+       for (i = 0; i < 64; i++)
+               csum = csum + efuse[i];
+
+       while (csum > 255)
+               csum = (csum & 0x00FF) + ((csum >> 8) & 0x00FF);
+
+       if (csum != 0xFF)
+               return -EINVAL;
+
+       *ledmode = (efuse[51] << 8) | efuse[52];
+
+       return 0;
+}
+
+static int ax88179_convert_old_led(struct usbnet *dev, u16 *ledvalue)
+{
+       u16 led;
+
+       /* Loaded the old eFuse LED Mode */
+       if (ax88179_read_cmd(dev, AX_ACCESS_EEPROM, 0x3C, 1, 2, &led) < 0)
+               return -EINVAL;
+
+       led >>= 8;
+       switch (led) {
+       case 0xFF:
+               led = LED0_ACTIVE | LED1_LINK_10 | LED1_LINK_100 |
+                     LED1_LINK_1000 | LED2_ACTIVE | LED2_LINK_10 |
+                     LED2_LINK_100 | LED2_LINK_1000 | LED_VALID;
+               break;
+       case 0xFE:
+               led = LED0_ACTIVE | LED1_LINK_1000 | LED2_LINK_100 | LED_VALID;
+               break;
+       case 0xFD:
+               led = LED0_ACTIVE | LED1_LINK_1000 | LED2_LINK_100 |
+                     LED2_LINK_10 | LED_VALID;
+               break;
+       case 0xFC:
+               led = LED0_ACTIVE | LED1_ACTIVE | LED1_LINK_1000 | LED2_ACTIVE |
+                     LED2_LINK_100 | LED2_LINK_10 | LED_VALID;
+               break;
+       default:
+               led = LED0_ACTIVE | LED1_LINK_10 | LED1_LINK_100 |
+                     LED1_LINK_1000 | LED2_ACTIVE | LED2_LINK_10 |
+                     LED2_LINK_100 | LED2_LINK_1000 | LED_VALID;
+               break;
+       }
+
+       *ledvalue = led;
+
+       return 0;
+}
+
+static int ax88179_led_setting(struct usbnet *dev)
+{
+       u8 ledfd, value = 0;
+       u16 tmp, ledact, ledlink, ledvalue = 0, delay = HZ / 10;
+       unsigned long jtimeout;
+
+       /* Check AX88179 version. UA1 or UA2*/
+       ax88179_read_cmd(dev, AX_ACCESS_MAC, GENERAL_STATUS, 1, 1, &value);
+
+       if (!(value & AX_SECLD)) {      /* UA1 */
+               value = AX_GPIO_CTRL_GPIO3EN | AX_GPIO_CTRL_GPIO2EN |
+                       AX_GPIO_CTRL_GPIO1EN;
+               if (ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_GPIO_CTRL,
+                                     1, 1, &value) < 0)
+                       return -EINVAL;
+       }
+
+       /* Check EEPROM */
+       if (!ax88179_check_eeprom(dev)) {
+               value = 0x42;
+               if (ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_SROM_ADDR,
+                                     1, 1, &value) < 0)
+                       return -EINVAL;
+
+               value = EEP_RD;
+               if (ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_SROM_CMD,
+                                     1, 1, &value) < 0)
+                       return -EINVAL;
+
+               jtimeout = jiffies + delay;
+               do {
+                       ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_SROM_CMD,
+                                        1, 1, &value);
+
+                       if (time_after(jiffies, jtimeout))
+                               return -EINVAL;
+
+               } while (value & EEP_BUSY);
+
+               ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_SROM_DATA_HIGH,
+                                1, 1, &value);
+               ledvalue = (value << 8);
+
+               ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_SROM_DATA_LOW,
+                                1, 1, &value);
+               ledvalue |= value;
+
+               /* load internal ROM for defaule setting */
+               if ((ledvalue == 0xFFFF) || ((ledvalue & LED_VALID) == 0))
+                       ax88179_convert_old_led(dev, &ledvalue);
+
+       } else if (!ax88179_check_efuse(dev, &ledvalue)) {
+               if ((ledvalue == 0xFFFF) || ((ledvalue & LED_VALID) == 0))
+                       ax88179_convert_old_led(dev, &ledvalue);
+       } else {
+               ax88179_convert_old_led(dev, &ledvalue);
+       }
+
+       tmp = GMII_PHY_PGSEL_EXT;
+       ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+                         GMII_PHY_PAGE_SELECT, 2, &tmp);
+
+       tmp = 0x2c;
+       ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+                         GMII_PHYPAGE, 2, &tmp);
+
+       ax88179_read_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+                        GMII_LED_ACT, 2, &ledact);
+
+       ax88179_read_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+                        GMII_LED_LINK, 2, &ledlink);
+
+       ledact &= GMII_LED_ACTIVE_MASK;
+       ledlink &= GMII_LED_LINK_MASK;
+
+       if (ledvalue & LED0_ACTIVE)
+               ledact |= GMII_LED0_ACTIVE;
+
+       if (ledvalue & LED1_ACTIVE)
+               ledact |= GMII_LED1_ACTIVE;
+
+       if (ledvalue & LED2_ACTIVE)
+               ledact |= GMII_LED2_ACTIVE;
+
+       if (ledvalue & LED0_LINK_10)
+               ledlink |= GMII_LED0_LINK_10;
+
+       if (ledvalue & LED1_LINK_10)
+               ledlink |= GMII_LED1_LINK_10;
+
+       if (ledvalue & LED2_LINK_10)
+               ledlink |= GMII_LED2_LINK_10;
+
+       if (ledvalue & LED0_LINK_100)
+               ledlink |= GMII_LED0_LINK_100;
+
+       if (ledvalue & LED1_LINK_100)
+               ledlink |= GMII_LED1_LINK_100;
+
+       if (ledvalue & LED2_LINK_100)
+               ledlink |= GMII_LED2_LINK_100;
+
+       if (ledvalue & LED0_LINK_1000)
+               ledlink |= GMII_LED0_LINK_1000;
+
+       if (ledvalue & LED1_LINK_1000)
+               ledlink |= GMII_LED1_LINK_1000;
+
+       if (ledvalue & LED2_LINK_1000)
+               ledlink |= GMII_LED2_LINK_1000;
+
+       tmp = ledact;
+       ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+                         GMII_LED_ACT, 2, &tmp);
+
+       tmp = ledlink;
+       ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+                         GMII_LED_LINK, 2, &tmp);
+
+       tmp = GMII_PHY_PGSEL_PAGE0;
+       ax88179_write_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+                         GMII_PHY_PAGE_SELECT, 2, &tmp);
+
+       /* LED full duplex setting */
+       ledfd = 0;
+       if (ledvalue & LED0_FD)
+               ledfd |= 0x01;
+       else if ((ledvalue & LED0_USB3_MASK) == 0)
+               ledfd |= 0x02;
+
+       if (ledvalue & LED1_FD)
+               ledfd |= 0x04;
+       else if ((ledvalue & LED1_USB3_MASK) == 0)
+               ledfd |= 0x08;
+
+       if (ledvalue & LED2_FD)
+               ledfd |= 0x10;
+       else if ((ledvalue & LED2_USB3_MASK) == 0)
+               ledfd |= 0x20;
+
+       ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_LEDCTRL, 1, 1, &ledfd);
+
+       return 0;
+}
+
+static int ax88179_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+       u8 buf[5];
+       u16 *tmp16;
+       u8 *tmp;
+       struct ax88179_data *ax179_data = (struct ax88179_data *)dev->data;
+
+       usbnet_get_endpoints(dev, intf);
+
+       tmp16 = (u16 *)buf;
+       tmp = (u8 *)buf;
+
+       memset(ax179_data, 0, sizeof(*ax179_data));
+
+       /* Power up ethernet PHY */
+       *tmp16 = 0;
+       ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, tmp16);
+       *tmp16 = AX_PHYPWR_RSTCTL_IPRL;
+       ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, tmp16);
+       msleep(200);
+
+       *tmp = AX_CLK_SELECT_ACS | AX_CLK_SELECT_BCS;
+       ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, tmp);
+       msleep(100);
+
+       ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_NODE_ID, ETH_ALEN,
+                        ETH_ALEN, dev->net->dev_addr);
+       memcpy(dev->net->perm_addr, dev->net->dev_addr, ETH_ALEN);
+
+       /* RX bulk configuration */
+       memcpy(tmp, &AX88179_BULKIN_SIZE[0], 5);
+       ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_BULKIN_QCTRL, 5, 5, tmp);
+
+       dev->rx_urb_size = 1024 * 20;
+
+       *tmp = 0x34;
+       ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PAUSE_WATERLVL_LOW, 1, 1, tmp);
+
+       *tmp = 0x52;
+       ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PAUSE_WATERLVL_HIGH,
+                         1, 1, tmp);
+
+       dev->net->netdev_ops = &ax88179_netdev_ops;
+       dev->net->ethtool_ops = &ax88179_ethtool_ops;
+       dev->net->needed_headroom = 8;
+
+       /* Initialize MII structure */
+       dev->mii.dev = dev->net;
+       dev->mii.mdio_read = ax88179_mdio_read;
+       dev->mii.mdio_write = ax88179_mdio_write;
+       dev->mii.phy_id_mask = 0xff;
+       dev->mii.reg_num_mask = 0xff;
+       dev->mii.phy_id = 0x03;
+       dev->mii.supports_gmii = 1;
+
+       dev->net->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+                             NETIF_F_RXCSUM | NETIF_F_SG | NETIF_F_TSO;
+
+       dev->net->hw_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+                                NETIF_F_RXCSUM | NETIF_F_SG | NETIF_F_TSO;
+
+       /* Enable checksum offload */
+       *tmp = AX_RXCOE_IP | AX_RXCOE_TCP | AX_RXCOE_UDP |
+              AX_RXCOE_TCPV6 | AX_RXCOE_UDPV6;
+       ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RXCOE_CTL, 1, 1, tmp);
+
+       *tmp = AX_TXCOE_IP | AX_TXCOE_TCP | AX_TXCOE_UDP |
+              AX_TXCOE_TCPV6 | AX_TXCOE_UDPV6;
+       ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, tmp);
+
+       /* Configure RX control register => start operation */
+       *tmp16 = AX_RX_CTL_DROPCRCERR | AX_RX_CTL_IPE | AX_RX_CTL_START |
+                AX_RX_CTL_AP | AX_RX_CTL_AMALL | AX_RX_CTL_AB;
+       ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, tmp16);
+
+       *tmp = AX_MONITOR_MODE_PMETYPE | AX_MONITOR_MODE_PMEPOL |
+              AX_MONITOR_MODE_RWMP;
+       ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MONITOR_MOD, 1, 1, tmp);
+
+       /* Configure default medium type => giga */
+       *tmp16 = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN |
+                AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_ALWAYS_ONE |
+                AX_MEDIUM_FULL_DUPLEX | AX_MEDIUM_GIGAMODE;
+       ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+                         2, 2, tmp16);
+
+       ax88179_led_setting(dev);
+
+       /* Restart autoneg */
+       mii_nway_restart(&dev->mii);
+
+       netif_carrier_off(dev->net);
+
+       return 0;
+}
+
+static void ax88179_unbind(struct usbnet *dev, struct usb_interface *intf)
+{
+       u16 tmp16;
+
+       /* Configure RX control register => stop operation */
+       tmp16 = AX_RX_CTL_STOP;
+       ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, &tmp16);
+
+       tmp16 = 0;
+       ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, &tmp16);
+
+       /* Power down ethernet PHY */
+       tmp16 = 0;
+       ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, &tmp16);
+}
+
+static void
+ax88179_rx_checksum(struct sk_buff *skb, u32 *pkt_hdr)
+{
+       skb->ip_summed = CHECKSUM_NONE;
+
+       /* checksum error bit is set */
+       if ((*pkt_hdr & AX_RXHDR_L3CSUM_ERR) ||
+           (*pkt_hdr & AX_RXHDR_L4CSUM_ERR))
+               return;
+
+       /* It must be a TCP or UDP packet with a valid checksum */
+       if (((*pkt_hdr & AX_RXHDR_L4_TYPE_MASK) == AX_RXHDR_L4_TYPE_TCP) ||
+           ((*pkt_hdr & AX_RXHDR_L4_TYPE_MASK) == AX_RXHDR_L4_TYPE_UDP))
+               skb->ip_summed = CHECKSUM_UNNECESSARY;
+}
+
+static int ax88179_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+       struct sk_buff *ax_skb;
+       int pkt_cnt;
+       u32 rx_hdr;
+       u16 hdr_off;
+       u32 *pkt_hdr;
+
+       skb_trim(skb, skb->len - 4);
+       memcpy(&rx_hdr, skb_tail_pointer(skb), 4);
+       le32_to_cpus(&rx_hdr);
+
+       pkt_cnt = (u16)rx_hdr;
+       hdr_off = (u16)(rx_hdr >> 16);
+       pkt_hdr = (u32 *)(skb->data + hdr_off);
+
+       while (pkt_cnt--) {
+               u16 pkt_len;
+
+               le32_to_cpus(pkt_hdr);
+               pkt_len = (*pkt_hdr >> 16) & 0x1fff;
+
+               /* Check CRC or runt packet */
+               if ((*pkt_hdr & AX_RXHDR_CRC_ERR) ||
+                   (*pkt_hdr & AX_RXHDR_DROP_ERR)) {
+                       skb_pull(skb, (pkt_len + 7) & 0xFFF8);
+                       pkt_hdr++;
+                       continue;
+               }
+
+               if (pkt_cnt == 0) {
+                       /* Skip IP alignment psudo header */
+                       skb_pull(skb, 2);
+                       skb->len = pkt_len;
+                       skb_set_tail_pointer(skb, pkt_len);
+                       skb->truesize = pkt_len + sizeof(struct sk_buff);
+                       ax88179_rx_checksum(skb, pkt_hdr);
+                       return 1;
+               }
+
+               ax_skb = skb_clone(skb, GFP_ATOMIC);
+               if (ax_skb) {
+                       ax_skb->len = pkt_len;
+                       ax_skb->data = skb->data + 2;
+                       skb_set_tail_pointer(ax_skb, pkt_len);
+                       ax_skb->truesize = pkt_len + sizeof(struct sk_buff);
+                       ax88179_rx_checksum(ax_skb, pkt_hdr);
+                       usbnet_skb_return(dev, ax_skb);
+               } else {
+                       return 0;
+               }
+
+               skb_pull(skb, (pkt_len + 7) & 0xFFF8);
+               pkt_hdr++;
+       }
+       return 1;
+}
+
+static struct sk_buff *
+ax88179_tx_fixup(struct usbnet *dev, struct sk_buff *skb, gfp_t flags)
+{
+       u32 tx_hdr1, tx_hdr2;
+       int frame_size = dev->maxpacket;
+       int mss = skb_shinfo(skb)->gso_size;
+       int headroom;
+       int tailroom;
+
+       tx_hdr1 = skb->len;
+       tx_hdr2 = mss;
+       if (((skb->len + 8) % frame_size) == 0)
+               tx_hdr2 |= 0x80008000;  /* Enable padding */
+
+       skb_linearize(skb);
+       headroom = skb_headroom(skb);
+       tailroom = skb_tailroom(skb);
+
+       if (!skb_header_cloned(skb) &&
+           !skb_cloned(skb) &&
+           (headroom + tailroom) >= 8) {
+               if (headroom < 8) {
+                       skb->data = memmove(skb->head + 8, skb->data, skb->len);
+                       skb_set_tail_pointer(skb, skb->len);
+               }
+       } else {
+               struct sk_buff *skb2;
+
+               skb2 = skb_copy_expand(skb, 8, 0, flags);
+               dev_kfree_skb_any(skb);
+               skb = skb2;
+               if (!skb)
+                       return NULL;
+       }
+
+       skb_push(skb, 4);
+       cpu_to_le32s(&tx_hdr2);
+       skb_copy_to_linear_data(skb, &tx_hdr2, 4);
+
+       skb_push(skb, 4);
+       cpu_to_le32s(&tx_hdr1);
+       skb_copy_to_linear_data(skb, &tx_hdr1, 4);
+
+       return skb;
+}
+
+static int ax88179_link_reset(struct usbnet *dev)
+{
+       struct ax88179_data *ax179_data = (struct ax88179_data *)dev->data;
+       u8 tmp[5], link_sts;
+       u16 mode, tmp16, delay = HZ / 10;
+       u32 tmp32 = 0x40000000;
+       unsigned long jtimeout;
+
+       jtimeout = jiffies + delay;
+       while (tmp32 & 0x40000000) {
+               mode = 0;
+               ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, &mode);
+               ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2,
+                                 &ax179_data->rxctl);
+
+               /*link up, check the usb device control TX FIFO full or empty*/
+               ax88179_read_cmd(dev, 0x81, 0x8c, 0, 4, &tmp32);
+
+               if (time_after(jiffies, jtimeout))
+                       return 0;
+       }
+
+       mode = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN |
+              AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_ALWAYS_ONE;
+
+       ax88179_read_cmd(dev, AX_ACCESS_MAC, PHYSICAL_LINK_STATUS,
+                        1, 1, &link_sts);
+
+       ax88179_read_cmd(dev, AX_ACCESS_PHY, AX88179_PHY_ID,
+                        GMII_PHY_PHYSR, 2, &tmp16);
+
+       if (!(tmp16 & GMII_PHY_PHYSR_LINK)) {
+               return 0;
+       } else if (GMII_PHY_PHYSR_GIGA == (tmp16 & GMII_PHY_PHYSR_SMASK)) {
+               mode |= AX_MEDIUM_GIGAMODE | AX_MEDIUM_EN_125MHZ;
+               if (dev->net->mtu > 1500)
+                       mode |= AX_MEDIUM_JUMBO_EN;
+
+               if (link_sts & AX_USB_SS)
+                       memcpy(tmp, &AX88179_BULKIN_SIZE[0], 5);
+               else if (link_sts & AX_USB_HS)
+                       memcpy(tmp, &AX88179_BULKIN_SIZE[1], 5);
+               else
+                       memcpy(tmp, &AX88179_BULKIN_SIZE[3], 5);
+       } else if (GMII_PHY_PHYSR_100 == (tmp16 & GMII_PHY_PHYSR_SMASK)) {
+               mode |= AX_MEDIUM_PS;
+
+               if (link_sts & (AX_USB_SS | AX_USB_HS))
+                       memcpy(tmp, &AX88179_BULKIN_SIZE[2], 5);
+               else
+                       memcpy(tmp, &AX88179_BULKIN_SIZE[3], 5);
+       } else {
+               memcpy(tmp, &AX88179_BULKIN_SIZE[3], 5);
+       }
+
+       /* RX bulk configuration */
+       ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_BULKIN_QCTRL, 5, 5, tmp);
+
+       dev->rx_urb_size = (1024 * (tmp[3] + 2));
+
+       if (tmp16 & GMII_PHY_PHYSR_FULL)
+               mode |= AX_MEDIUM_FULL_DUPLEX;
+       ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+                         2, 2, &mode);
+
+       netif_carrier_on(dev->net);
+
+       return 0;
+}
+
+static int ax88179_reset(struct usbnet *dev)
+{
+       u8 buf[5];
+       u16 *tmp16;
+       u8 *tmp;
+
+       tmp16 = (u16 *)buf;
+       tmp = (u8 *)buf;
+
+       /* Power up ethernet PHY */
+       *tmp16 = 0;
+       ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, tmp16);
+
+       *tmp16 = AX_PHYPWR_RSTCTL_IPRL;
+       ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, tmp16);
+       msleep(200);
+
+       *tmp = AX_CLK_SELECT_ACS | AX_CLK_SELECT_BCS;
+       ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, tmp);
+       msleep(100);
+
+       /* Ethernet PHY Auto Detach*/
+       ax88179_auto_detach(dev, 0);
+
+       ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_NODE_ID, ETH_ALEN, ETH_ALEN,
+                        dev->net->dev_addr);
+       memcpy(dev->net->perm_addr, dev->net->dev_addr, ETH_ALEN);
+
+       /* RX bulk configuration */
+       memcpy(tmp, &AX88179_BULKIN_SIZE[0], 5);
+       ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_BULKIN_QCTRL, 5, 5, tmp);
+
+       dev->rx_urb_size = 1024 * 20;
+
+       *tmp = 0x34;
+       ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PAUSE_WATERLVL_LOW, 1, 1, tmp);
+
+       *tmp = 0x52;
+       ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PAUSE_WATERLVL_HIGH,
+                         1, 1, tmp);
+
+       dev->net->features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+                             NETIF_F_RXCSUM | NETIF_F_SG | NETIF_F_TSO;
+
+       dev->net->hw_features |= NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
+                                NETIF_F_RXCSUM | NETIF_F_SG | NETIF_F_TSO;
+
+       /* Enable checksum offload */
+       *tmp = AX_RXCOE_IP | AX_RXCOE_TCP | AX_RXCOE_UDP |
+              AX_RXCOE_TCPV6 | AX_RXCOE_UDPV6;
+       ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RXCOE_CTL, 1, 1, tmp);
+
+       *tmp = AX_TXCOE_IP | AX_TXCOE_TCP | AX_TXCOE_UDP |
+              AX_TXCOE_TCPV6 | AX_TXCOE_UDPV6;
+       ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_TXCOE_CTL, 1, 1, tmp);
+
+       /* Configure RX control register => start operation */
+       *tmp16 = AX_RX_CTL_DROPCRCERR | AX_RX_CTL_IPE | AX_RX_CTL_START |
+                AX_RX_CTL_AP | AX_RX_CTL_AMALL | AX_RX_CTL_AB;
+       ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_RX_CTL, 2, 2, tmp16);
+
+       *tmp = AX_MONITOR_MODE_PMETYPE | AX_MONITOR_MODE_PMEPOL |
+              AX_MONITOR_MODE_RWMP;
+       ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MONITOR_MOD, 1, 1, tmp);
+
+       /* Configure default medium type => giga */
+       *tmp16 = AX_MEDIUM_RECEIVE_EN | AX_MEDIUM_TXFLOW_CTRLEN |
+                AX_MEDIUM_RXFLOW_CTRLEN | AX_MEDIUM_ALWAYS_ONE |
+                AX_MEDIUM_FULL_DUPLEX | AX_MEDIUM_GIGAMODE;
+       ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+                         2, 2, tmp16);
+
+       ax88179_led_setting(dev);
+
+       /* Restart autoneg */
+       mii_nway_restart(&dev->mii);
+
+       netif_carrier_off(dev->net);
+
+       return 0;
+}
+
+static int ax88179_stop(struct usbnet *dev)
+{
+       u16 tmp16;
+
+       ax88179_read_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+                        2, 2, &tmp16);
+       tmp16 &= ~AX_MEDIUM_RECEIVE_EN;
+       ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_MEDIUM_STATUS_MODE,
+                         2, 2, &tmp16);
+
+       return 0;
+}
+
+static const struct driver_info ax88179_info = {
+       .description = "ASIX AX88179 USB 3.0 Gigibit Ethernet",
+       .bind = ax88179_bind,
+       .unbind = ax88179_unbind,
+       .status = ax88179_status,
+       .link_reset = ax88179_link_reset,
+       .reset = ax88179_reset,
+       .stop = ax88179_stop,
+       .flags = FLAG_ETHER | FLAG_FRAMING_AX,
+       .rx_fixup = ax88179_rx_fixup,
+       .tx_fixup = ax88179_tx_fixup,
+};
+
+static const struct driver_info ax88178a_info = {
+       .description = "ASIX AX88178A USB 2.0 Gigibit Ethernet",
+       .bind = ax88179_bind,
+       .unbind = ax88179_unbind,
+       .status = ax88179_status,
+       .link_reset = ax88179_link_reset,
+       .reset = ax88179_reset,
+       .stop = ax88179_stop,
+       .flags = FLAG_ETHER | FLAG_FRAMING_AX,
+       .rx_fixup = ax88179_rx_fixup,
+       .tx_fixup = ax88179_tx_fixup,
+};
+
+static const struct driver_info sitecom_info = {
+       .description = "Sitecom USB 3.0 to Gigabit Adapter",
+       .bind = ax88179_bind,
+       .unbind = ax88179_unbind,
+       .status = ax88179_status,
+       .link_reset = ax88179_link_reset,
+       .reset = ax88179_reset,
+       .stop = ax88179_stop,
+       .flags = FLAG_ETHER | FLAG_FRAMING_AX,
+       .rx_fixup = ax88179_rx_fixup,
+       .tx_fixup = ax88179_tx_fixup,
+};
+
+static const struct usb_device_id products[] = {
+{
+       /* ASIX AX88179 10/100/1000 */
+       USB_DEVICE(0x0b95, 0x1790),
+       .driver_info = (unsigned long)&ax88179_info,
+}, {
+       /* ASIX AX88178A 10/100/1000 */
+       USB_DEVICE(0x0b95, 0x178a),
+       .driver_info = (unsigned long)&ax88178a_info,
+}, {
+       /* Sitecom USB 3.0 to Gigabit Adapter */
+       USB_DEVICE(0x0df6, 0x0072),
+       .driver_info = (unsigned long) &sitecom_info,
+},
+       { },
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver ax88179_178a_driver = {
+       .name =         "ax88179_178a",
+       .id_table =     products,
+       .probe =        usbnet_probe,
+       .suspend =      ax88179_suspend,
+       .resume =       ax88179_resume,
+       .disconnect =   usbnet_disconnect,
+       .supports_autosuspend = 1,
+       .disable_hub_initiated_lpm = 1,
+};
+
+module_usb_driver(ax88179_178a_driver);
+
+MODULE_DESCRIPTION("ASIX AX88179/178A based USB 3.0/2.0 Gigabit Ethernet Devices");
+MODULE_LICENSE("GPL");