+2008-05-14 Kenneth Zadeck <zadeck@naturalbridge.com>
+
+ * doc/rtl.texi: Removed reference to REG_NO_CONFLICT notes.
+ * optabs.c (expand_binop, expand_absneg_bit, expand_unop,
+ expand_copysign_bit, ): Change call to emit_no_conflict_block to
+ emit_insn and remove unneeded code to construct extra args.
+ (emit_no_conflict_block): Removed.
+ * optabls.h: (emit_no_conflict_block): Removed.
+ * cse.c (cse_extended_basic_block): Remove search for
+ REG_NO_CONFLICT note.
+ * global.c: Removed incorrect comment added in revision 117.
+ * expr.c (convert_move): Change call to emit_no_conflict_block to
+ emit_insn.
+ * recog.c: Change comments so that they do not mention
+ REG_NO_CONFLICT.
+ * local_alloc.c (combine_regs): Removed last parameter.
+ (no_conflict_p): Removed.
+ (block_alloc): Removed note, no_conflict_combined_regno and set
+ local vars. Removed all code to process REG_NO_CONFLICT blocks.
+ (combine_regs): Removed already_dead and code to look for
+ REG_NO_CONFLICT notes.
+ * lower_subreg (remove_retval_note): Removed code to look for
+ REG_NO_CONFLICT block.
+ (resolve_reg_notes): Removed REG_NO_CONFLICT case.
+ (resolve_clobber): Remove code to process libcalls that have
+ REG_NO_CONFLICT notes.
+ * loop_invariant.c (find_invariant_insn): Removed REG_NO_CONFLICT
+ case.
+ * combine.c (can_combine_p, distribute_notes): Removed REG_NO_CONFLICT
+ case.
+ * config/cris/cris.md (movdi pattern): Changed
+ emit_no_conflict_block to emit_insns.
+ * config/mn10300/mn10300.md (absdf2, negdf2 patterns): Ditto.
+ * config/m68k/m68k.md (negdf2, negxf2, absdf2, absxf2 patterns):
+ Ditto.
+ * reg-notes.def (NO_CONFLICT): Removed.
+
2008-05-14 David S. Miller <davem@davemloft.net>
* config/sparc/sparc.c (sparc_profile_hook): If
/* Don't eliminate a store in the stack pointer. */
if (dest == stack_pointer_rtx
/* Don't combine with an insn that sets a register to itself if it has
- a REG_EQUAL note. This may be part of a REG_NO_CONFLICT sequence. */
+ a REG_EQUAL note. This may be part of a LIBCALL sequence. */
|| (rtx_equal_p (src, dest) && find_reg_note (insn, REG_EQUAL, NULL_RTX))
/* Can't merge an ASM_OPERANDS. */
|| GET_CODE (src) == ASM_OPERANDS
&& use_crosses_set_p (src, DF_INSN_LUID (insn)))
|| (GET_CODE (src) == ASM_OPERANDS && MEM_VOLATILE_P (src))
|| GET_CODE (src) == UNSPEC_VOLATILE))
- /* If there is a REG_NO_CONFLICT note for DEST in I3 or SUCC, we get
- better register allocation by not doing the combine. */
- || find_reg_note (i3, REG_NO_CONFLICT, dest)
- || (succ && find_reg_note (succ, REG_NO_CONFLICT, dest))
/* Don't combine across a CALL_INSN, because that would possibly
change whether the life span of some REGs crosses calls or not,
and it is a pain to update that information.
break;
case REG_INC:
- case REG_NO_CONFLICT:
/* These notes say something about how a register is used. They must
be present on any use of the register in I2 or I3. */
if (reg_mentioned_p (XEXP (note, 0), PATTERN (i3)))
gcc.c-torture/execute/961213-1.c shows that CSE2 gets confused by the
resulting subreg sets when using the construct from mcore (as of FSF
CVS, version -r 1.5), and it believes that the high part (the last one
- emitted) is the final value. This construct from romp seems more
- robust, especially considering the head comments from
- emit_no_conflict_block. */
+ emitted) is the final value. */
if ((CONST_INT_P (operands[1]) || GET_CODE (operands[1]) == CONST_DOUBLE)
&& ! reload_completed
&& ! reload_in_progress)
insns = get_insns ();
end_sequence ();
- emit_no_conflict_block (insns, op0, op1, 0, op1);
+ emit_insn (insns);
DONE;
}
})
insns = get_insns ();
end_sequence ();
- emit_no_conflict_block (insns, operands[0], operands[1], 0, 0);
+ emit_insn (insns);
DONE;
}
})
insns = get_insns ();
end_sequence ();
- emit_no_conflict_block (insns, operands[0], operands[1], 0, 0);
+ emit_insn (insns);
DONE;
}
})
insns = get_insns ();
end_sequence ();
- emit_no_conflict_block (insns, operands[0], operands[1], 0, 0);
+ emit_insn (insns);
DONE;
}
})
insns = get_insns ();
end_sequence ();
- emit_no_conflict_block (insns, operands[0], operands[1], 0, 0);
+ emit_insn (insns);
DONE;
}
})
insns = get_insns ();
end_sequence ();
- emit_no_conflict_block (insns, operands[0], operands[1], 0, 0);
+ emit_insn (insns);
DONE;
}")
insns = get_insns ();
end_sequence ();
- emit_no_conflict_block (insns, operands[0], operands[1], 0, 0);
+ emit_insn (insns);
DONE;
}")
else
no_conflict = -1;
}
- else if (find_reg_note (insn, REG_NO_CONFLICT, NULL_RTX))
- no_conflict = 1;
}
cse_insn (insn, libcall_insn);
The @code{REG_NONNEG} note is added to insns only if the machine
description has a @samp{decrement_and_branch_until_zero} pattern.
-@findex REG_NO_CONFLICT
-@item REG_NO_CONFLICT
-This insn does not cause a conflict between @var{op} and the item
-being set by this insn even though it might appear that it does.
-In other words, if the destination register and @var{op} could
-otherwise be assigned the same register, this insn does not
-prevent that assignment.
-
-Insns with this note are usually part of a block that begins with a
-@code{clobber} insn specifying a multi-word pseudo register (which will
-be the output of the block), a group of insns that each set one word of
-the value and have the @code{REG_NO_CONFLICT} note attached, and a final
-insn that copies the output to itself with an attached @code{REG_EQUAL}
-note giving the expression being computed. This block is encapsulated
-with @code{REG_LIBCALL} and @code{REG_RETVAL} notes on the first and
-last insns, respectively.
-
@findex REG_LABEL_OPERAND
@item REG_LABEL_OPERAND
This insn uses @var{op}, a @code{code_label} or a @code{note} of type
insns = get_insns ();
end_sequence ();
- emit_no_conflict_block (insns, to, from, NULL_RTX,
- gen_rtx_fmt_e (equiv_code, to_mode, copy_rtx (from)));
+ emit_insn (insns);
return;
}
#define SET_REGBIT(TABLE, I, J) SET_HARD_REG_BIT (allocno[I].TABLE, J)
-/* This is turned off because it doesn't work right for DImode.
- (And it is only used for DImode, so the other cases are worthless.)
- The problem is that it isn't true that there is NO possibility of conflict;
- only that there is no conflict if the two pseudos get the exact same regs.
- If they were allocated with a partial overlap, there would be a conflict.
- We can't safely turn off the conflict unless we have another way to
- prevent the partial overlap.
-
- Idea: change hard_reg_conflicts so that instead of recording which
- hard regs the allocno may not overlap, it records where the allocno
- may not start. Change both where it is used and where it is updated.
- Then there is a way to record that (reg:DI 108) may start at 10
- but not at 9 or 11. There is still the question of how to record
- this semi-conflict between two pseudos. */
-#if 0
-/* Reg pairs for which conflict after the current insn
- is inhibited by a REG_NO_CONFLICT note.
- If the table gets full, we ignore any other notes--that is conservative. */
-#define NUM_NO_CONFLICT_PAIRS 4
-/* Number of pairs in use in this insn. */
-int n_no_conflict_pairs;
-static struct { int allocno1, allocno2;}
- no_conflict_pairs[NUM_NO_CONFLICT_PAIRS];
-#endif /* 0 */
-
/* Return true if *LOC contains an asm. */
static int
static int qty_sugg_compare_1 (const void *, const void *);
static int qty_compare (int, int);
static int qty_compare_1 (const void *, const void *);
-static int combine_regs (rtx, rtx, int, int, rtx, int);
+static int combine_regs (rtx, rtx, int, int, rtx);
static int reg_meets_class_p (int, enum reg_class);
static void update_qty_class (int, int);
static void reg_is_set (rtx, const_rtx, void *);
int, int);
static void mark_life (int, enum machine_mode, int);
static void post_mark_life (int, enum machine_mode, int, int, int);
-static int no_conflict_p (rtx, rtx, rtx);
static int requires_inout (const char *);
\f
/* Allocate a new quantity (new within current basic block)
{
int i, q;
rtx insn;
- rtx note, hard_reg;
+ rtx hard_reg;
int insn_number = 0;
int insn_count = 0;
int max_uid = get_max_uid ();
int *qty_order;
- int no_conflict_combined_regno = -1;
struct df_ref ** def_rec;
/* Count the instructions in the basic block. */
if (INSN_P (insn))
{
- rtx link, set;
+ rtx link;
int win = 0;
rtx r0, r1 = NULL_RTX;
int combined_regno = -1;
if (REG_P (r1) || GET_CODE (r1) == SUBREG)
win = combine_regs (r1, r0, may_save_copy,
- insn_number, insn, 0);
+ insn_number, insn);
}
if (win)
break;
}
}
- /* Recognize an insn sequence with an ultimate result
- which can safely overlap one of the inputs.
- The sequence begins with a CLOBBER of its result,
- and ends with an insn that copies the result to itself
- and has a REG_EQUAL note for an equivalent formula.
- That note indicates what the inputs are.
- The result and the input can overlap if each insn in
- the sequence either doesn't mention the input
- or has a REG_NO_CONFLICT note to inhibit the conflict.
-
- We do the combining test at the CLOBBER so that the
- destination register won't have had a quantity number
- assigned, since that would prevent combining. */
-
- if (optimize
- && GET_CODE (PATTERN (insn)) == CLOBBER
- && (r0 = XEXP (PATTERN (insn), 0),
- REG_P (r0))
- && (link = find_reg_note (insn, REG_LIBCALL, NULL_RTX)) != 0
- && XEXP (link, 0) != 0
- && NONJUMP_INSN_P (XEXP (link, 0))
- && (set = single_set (XEXP (link, 0))) != 0
- && SET_DEST (set) == r0 && SET_SRC (set) == r0
- && (note = find_reg_note (XEXP (link, 0), REG_EQUAL,
- NULL_RTX)) != 0)
- {
- if (r1 = XEXP (note, 0), REG_P (r1)
- /* Check that we have such a sequence. */
- && no_conflict_p (insn, r0, r1))
- win = combine_regs (r1, r0, 1, insn_number, insn, 1);
- else if (GET_RTX_FORMAT (GET_CODE (XEXP (note, 0)))[0] == 'e'
- && (r1 = XEXP (XEXP (note, 0), 0),
- REG_P (r1) || GET_CODE (r1) == SUBREG)
- && no_conflict_p (insn, r0, r1))
- win = combine_regs (r1, r0, 0, insn_number, insn, 1);
-
- /* Here we care if the operation to be computed is
- commutative. */
- else if (COMMUTATIVE_P (XEXP (note, 0))
- && (r1 = XEXP (XEXP (note, 0), 1),
- (REG_P (r1) || GET_CODE (r1) == SUBREG))
- && no_conflict_p (insn, r0, r1))
- win = combine_regs (r1, r0, 0, insn_number, insn, 1);
-
- /* If we did combine something, show the register number
- in question so that we know to ignore its death. */
- if (win)
- no_conflict_combined_regno = REGNO (r1);
- }
-
/* If registers were just tied, set COMBINED_REGNO
to the number of the register used in this insn
that was tied to the register set in this insn.
combined_regno = REGNO (r1);
}
- /* Mark the death of everything that dies in this instruction,
- except for anything that was just combined. */
+ /* Mark the death of everything that dies in this instruction. */
for (link = REG_NOTES (insn); link; link = XEXP (link, 1))
if (REG_NOTE_KIND (link) == REG_DEAD
&& REG_P (XEXP (link, 0))
- && combined_regno != (int) REGNO (XEXP (link, 0))
- && (no_conflict_combined_regno != (int) REGNO (XEXP (link, 0))
- || ! find_reg_note (insn, REG_NO_CONFLICT,
- XEXP (link, 0))))
+ && combined_regno != (int) REGNO (XEXP (link, 0)))
wipe_dead_reg (XEXP (link, 0), 0);
/* Allocate qty numbers for all registers local to this block
if (REG_NOTE_KIND (link) == REG_UNUSED
&& REG_P (XEXP (link, 0)))
wipe_dead_reg (XEXP (link, 0), 1);
-
- /* If this is an insn that has a REG_RETVAL note pointing at a
- CLOBBER insn, we have reached the end of a REG_NO_CONFLICT
- block, so clear any register number that combined within it. */
- if ((note = find_reg_note (insn, REG_RETVAL, NULL_RTX)) != 0
- && NONJUMP_INSN_P (XEXP (note, 0))
- && GET_CODE (PATTERN (XEXP (note, 0))) == CLOBBER)
- no_conflict_combined_regno = -1;
}
/* Set the registers live after INSN_NUMBER. Note that we never
If we really combined them, we could lose if the pseudo lives
across an insn that clobbers the hard reg (eg, movmem).
- ALREADY_DEAD is nonzero if USEDREG is known to be dead even though
- there is no REG_DEAD note on INSN. This occurs during the processing
- of REG_NO_CONFLICT blocks.
-
MAY_SAVE_COPY is nonzero if this insn is simply copying USEDREG to
SETREG or if the input and output must share a register.
In that case, we record a hard reg suggestion in QTY_PHYS_COPY_SUGG.
static int
combine_regs (rtx usedreg, rtx setreg, int may_save_copy, int insn_number,
- rtx insn, int already_dead)
+ rtx insn)
{
int ureg, sreg;
int offset = 0;
&& usize < qty[reg_qty[ureg]].size)
/* Can't combine if SREG is not a register we can allocate. */
|| (sreg >= FIRST_PSEUDO_REGISTER && reg_qty[sreg] == -1)
- /* Don't combine with a pseudo mentioned in a REG_NO_CONFLICT note.
- These have already been taken care of. This probably wouldn't
- combine anyway, but don't take any chances. */
- || (ureg >= FIRST_PSEUDO_REGISTER
- && find_reg_note (insn, REG_NO_CONFLICT, usedreg))
/* Don't tie something to itself. In most cases it would make no
difference, but it would screw up if the reg being tied to itself
also dies in this insn. */
if this is the last use of UREG, provided the classes they want
are compatible. */
- if ((already_dead || find_regno_note (insn, REG_DEAD, ureg))
+ if (find_regno_note (insn, REG_DEAD, ureg)
&& reg_meets_class_p (sreg, qty[reg_qty[ureg]].min_class))
{
/* Add SREG to UREG's quantity. */
}
}
\f
-/* INSN is the CLOBBER insn that starts a REG_NO_NOCONFLICT block, R0
- is the register being clobbered, and R1 is a register being used in
- the equivalent expression.
-
- If R1 dies in the block and has a REG_NO_CONFLICT note on every insn
- in which it is used, return 1.
-
- Otherwise, return 0. */
-
-static int
-no_conflict_p (rtx insn, rtx r0 ATTRIBUTE_UNUSED, rtx r1)
-{
- int ok = 0;
- rtx note = find_reg_note (insn, REG_LIBCALL, NULL_RTX);
- rtx p, last;
-
- /* If R1 is a hard register, return 0 since we handle this case
- when we scan the insns that actually use it. */
-
- if (note == 0
- || (REG_P (r1) && REGNO (r1) < FIRST_PSEUDO_REGISTER)
- || (GET_CODE (r1) == SUBREG && REG_P (SUBREG_REG (r1))
- && REGNO (SUBREG_REG (r1)) < FIRST_PSEUDO_REGISTER))
- return 0;
-
- last = XEXP (note, 0);
-
- for (p = NEXT_INSN (insn); p && p != last; p = NEXT_INSN (p))
- if (INSN_P (p))
- {
- if (find_reg_note (p, REG_DEAD, r1))
- ok = 1;
-
- /* There must be a REG_NO_CONFLICT note on every insn, otherwise
- some earlier optimization pass has inserted instructions into
- the sequence, and it is not safe to perform this optimization.
- Note that emit_no_conflict_block always ensures that this is
- true when these sequences are created. */
- if (! find_reg_note (p, REG_NO_CONFLICT, r1))
- return 0;
- }
-
- return ok;
-}
-\f
/* Return the number of alternatives for which the constraint string P
indicates that the operand must be equal to operand 0 and that no register
is acceptable. */
/* Until we get rid of LIBCALLS. */
if (find_reg_note (insn, REG_RETVAL, NULL_RTX)
- || find_reg_note (insn, REG_LIBCALL, NULL_RTX)
- || find_reg_note (insn, REG_NO_CONFLICT, NULL_RTX))
+ || find_reg_note (insn, REG_LIBCALL, NULL_RTX))
return;
#ifdef HAVE_cc0
static void
remove_retval_note (rtx insn1)
{
- rtx note0, insn0, note1, insn;
+ rtx note0, insn0, note1;
note1 = find_reg_note (insn1, REG_RETVAL, NULL);
if (note1 == NULL_RTX)
remove_note (insn0, note0);
remove_note (insn1, note1);
-
- for (insn = insn0; insn != insn1; insn = NEXT_INSN (insn))
- {
- while (1)
- {
- rtx note;
-
- note = find_reg_note (insn, REG_NO_CONFLICT, NULL);
- if (note == NULL_RTX)
- break;
- remove_note (insn, note);
- }
- }
}
/* Resolve any decomposed registers which appear in register notes on
note = *pnote;
switch (REG_NOTE_KIND (note))
{
- case REG_NO_CONFLICT:
case REG_DEAD:
case REG_UNUSED:
if (resolve_reg_p (XEXP (note, 0)))
static bool
resolve_clobber (rtx pat, rtx insn)
{
- rtx reg, note;
+ rtx reg;
enum machine_mode orig_mode;
unsigned int words, i;
int ret;
if (!resolve_reg_p (reg) && !resolve_subreg_p (reg))
return false;
- /* If this clobber has a REG_LIBCALL note, then it is the initial
- clobber added by emit_no_conflict_block. We were able to
- decompose the register, so we no longer need the clobber. */
- note = find_reg_note (insn, REG_LIBCALL, NULL_RTX);
- if (note != NULL_RTX)
- {
- remove_retval_note (XEXP (note, 0));
- delete_insn (insn);
- return true;
- }
-
orig_mode = GET_MODE (reg);
words = GET_MODE_SIZE (orig_mode);
words = (words + UNITS_PER_WORD - 1) / UNITS_PER_WORD;
If we want to multiply two two-word values and have normal and widening
multiplies of single-word values, we can do this with three smaller
- multiplications. Note that we do not make a REG_NO_CONFLICT block here
- because we are not operating on one word at a time.
+ multiplications.
The multiplication proceeds as follows:
_______________________
else
equiv_value = 0;
- emit_no_conflict_block (insns, target, op0, op1, equiv_value);
+ emit_insn (insns);
return target;
}
}
|| (shift_mask == BITS_PER_WORD - 1
&& double_shift_mask == BITS_PER_WORD * 2 - 1))
{
- rtx insns, equiv_value;
+ rtx insns;
rtx into_target, outof_target;
rtx into_input, outof_input;
int left_shift, outof_word;
insns = get_insns ();
end_sequence ();
- equiv_value = gen_rtx_fmt_ee (binoptab->code, mode, op0, op1);
- emit_no_conflict_block (insns, target, op0, op1, equiv_value);
+ emit_insn (insns);
return target;
}
end_sequence ();
if (inter != 0)
{
- /* One may be tempted to wrap the insns in a REG_NO_CONFLICT
- block to help the register allocator a bit. But a multi-word
- rotate will need all the input bits when setting the output
- bits, so there clearly is a conflict between the input and
- output registers. So we can't use a no-conflict block here. */
emit_insn (insns);
return target;
}
insns = get_insns ();
end_sequence ();
- temp = gen_rtx_fmt_e (code, mode, copy_rtx (op0));
- emit_no_conflict_block (insns, target, op0, NULL_RTX, temp);
+ emit_insn (insns);
}
else
{
insns = get_insns ();
end_sequence ();
- emit_no_conflict_block (insns, target, op0, NULL_RTX,
- gen_rtx_fmt_e (unoptab->code, mode,
- copy_rtx (op0)));
+ emit_insn (insns);
return target;
}
insns = get_insns ();
end_sequence ();
- emit_no_conflict_block (insns, target, op0, op1, NULL_RTX);
+ emit_insn (insns);
}
else
{
bool must_stay;
};
-/* Called via note_stores by emit_no_conflict_block and emit_libcall_block.
- Set P->must_stay if the currently examined clobber / store has to stay
- in the list of insns that constitute the actual no_conflict block /
- libcall block. */
+/* Called via note_stores by emit_libcall_block. Set P->must_stay if
+ the currently examined clobber / store has to stay in the list of
+ insns that constitute the actual libcall block. */
static void
no_conflict_move_test (rtx dest, const_rtx set, void *p0)
{
}
}
-/* Emit code to perform a series of operations on a multi-word quantity, one
- word at a time.
-
- Such a block is preceded by a CLOBBER of the output, consists of multiple
- insns, each setting one word of the output, and followed by a SET copying
- the output to itself.
-
- Each of the insns setting words of the output receives a REG_NO_CONFLICT
- note indicating that it doesn't conflict with the (also multi-word)
- inputs. The entire block is surrounded by REG_LIBCALL and REG_RETVAL
- notes.
-
- INSNS is a block of code generated to perform the operation, not including
- the CLOBBER and final copy. All insns that compute intermediate values
- are first emitted, followed by the block as described above.
-
- TARGET, OP0, and OP1 are the output and inputs of the operations,
- respectively. OP1 may be zero for a unary operation.
-
- EQUIV, if nonzero, is an expression to be placed into a REG_EQUAL note
- on the last insn.
-
- If TARGET is not a register, INSNS is simply emitted with no special
- processing. Likewise if anything in INSNS is not an INSN or if
- there is a libcall block inside INSNS.
-
- The final insn emitted is returned. */
-
-rtx
-emit_no_conflict_block (rtx insns, rtx target, rtx op0, rtx op1, rtx equiv)
-{
- rtx prev, next, first, last, insn;
-
- if (!REG_P (target) || reload_in_progress)
- return emit_insn (insns);
- else
- for (insn = insns; insn; insn = NEXT_INSN (insn))
- if (!NONJUMP_INSN_P (insn)
- || find_reg_note (insn, REG_LIBCALL, NULL_RTX))
- return emit_insn (insns);
-
- /* First emit all insns that do not store into words of the output and remove
- these from the list. */
- for (insn = insns; insn; insn = next)
- {
- rtx note;
- struct no_conflict_data data;
-
- next = NEXT_INSN (insn);
-
- /* Some ports (cris) create a libcall regions at their own. We must
- avoid any potential nesting of LIBCALLs. */
- if ((note = find_reg_note (insn, REG_LIBCALL, NULL)) != NULL)
- remove_note (insn, note);
- if ((note = find_reg_note (insn, REG_RETVAL, NULL)) != NULL)
- remove_note (insn, note);
-
- data.target = target;
- data.first = insns;
- data.insn = insn;
- data.must_stay = 0;
- note_stores (PATTERN (insn), no_conflict_move_test, &data);
- if (! data.must_stay)
- {
- if (PREV_INSN (insn))
- NEXT_INSN (PREV_INSN (insn)) = next;
- else
- insns = next;
-
- if (next)
- PREV_INSN (next) = PREV_INSN (insn);
-
- add_insn (insn);
- }
- }
-
- prev = get_last_insn ();
-
- /* Now write the CLOBBER of the output, followed by the setting of each
- of the words, followed by the final copy. */
- if (target != op0 && target != op1)
- emit_insn (gen_rtx_CLOBBER (VOIDmode, target));
-
- for (insn = insns; insn; insn = next)
- {
- next = NEXT_INSN (insn);
- add_insn (insn);
-
- if (op1 && REG_P (op1))
- REG_NOTES (insn) = gen_rtx_EXPR_LIST (REG_NO_CONFLICT, op1,
- REG_NOTES (insn));
-
- if (op0 && REG_P (op0))
- REG_NOTES (insn) = gen_rtx_EXPR_LIST (REG_NO_CONFLICT, op0,
- REG_NOTES (insn));
- }
-
- if (optab_handler (mov_optab, GET_MODE (target))->insn_code
- != CODE_FOR_nothing)
- {
- last = emit_move_insn (target, target);
- if (equiv)
- set_unique_reg_note (last, REG_EQUAL, equiv);
- }
- else
- {
- last = get_last_insn ();
-
- /* Remove any existing REG_EQUAL note from "last", or else it will
- be mistaken for a note referring to the full contents of the
- alleged libcall value when found together with the REG_RETVAL
- note added below. An existing note can come from an insn
- expansion at "last". */
- remove_note (last, find_reg_note (last, REG_EQUAL, NULL_RTX));
- }
-
- if (prev == 0)
- first = get_insns ();
- else
- first = NEXT_INSN (prev);
-
- maybe_encapsulate_block (first, last, equiv);
-
- return last;
-}
\f
/* Emit code to make a call to a constant function or a library call.
REG_LIBCALL_ID notes to all insns in block. */
extern void maybe_encapsulate_block (rtx, rtx, rtx);
-/* Emit code to perform a series of operations on a multi-word quantity, one
- word at a time. */
-extern rtx emit_no_conflict_block (rtx, rtx, rtx, rtx, rtx);
-
/* Emit one rtl insn to compare two rtx's. */
extern void emit_cmp_insn (rtx, rtx, enum rtx_code, rtx, enum machine_mode,
int);
/* Don't split no-op move insns. These should silently
disappear later in final. Splitting such insns would
- break the code that handles REG_NO_CONFLICT blocks. */
+ break the code that handles LIBCALL blocks. */
if (set && set_noop_p (set))
{
/* Nops get in the way while scheduling, so delete them
{
/* Don't split no-op move insns. These should silently
disappear later in final. Splitting such insns would
- break the code that handles REG_NO_CONFLICT blocks. */
+ break the code that handles LIBCALL blocks. */
rtx set = single_set (insn);
if (set && set_noop_p (set))
{
will never be added to any instructions. */
REG_NOTE (NONNEG)
-/* There is no conflict *after this insn* between the register in the
- note and the destination of this insn. */
-REG_NOTE (NO_CONFLICT)
-
/* Identifies a register set in this insn and never used. */
REG_NOTE (UNUSED)
projects / platform / upstream / linaro-gcc.git / commitdiff