Merge branches 'at91', 'ep93xx', 'etm', 'ks8695', 'nuc', 'u300' and 'u8500' into...
authorRussell King <rmk+kernel@arm.linux.org.uk>
Sat, 5 Dec 2009 10:35:18 +0000 (10:35 +0000)
committerRussell King <rmk+kernel@arm.linux.org.uk>
Sat, 5 Dec 2009 10:35:18 +0000 (10:35 +0000)
1  2  3  4  5  6  7  8 
MAINTAINERS
arch/arm/mach-at91/Kconfig
arch/arm/mach-at91/at91sam9g45_devices.c
drivers/dma/Kconfig

diff --cc MAINTAINERS
@@@@@@@@@ -107,12 -73,38 -107,12 -107,12 -73,39 -107,12 -73,38 -107,12 +107,12 @@@@@@@@@ Note: For the hard of thinking, this li
        order. If you could add yourselves to it in alphabetical order that would be
        so much easier [Ed]
        
 -    - P: Person (obsolete)
 -    - M: Mail patches to: FullName <address@domain>
    -   P: Person
    -   M: Mail patches to
 -  - - L: Mailing list that is relevant to this area
 -  - - W: Web-page with status/info
 -  - - T: SCM tree type and location.  Type is one of: git, hg, quilt, stgit.
 -  - - S: Status, one of the following:
 -  - - 
 -  - -         Supported:      Someone is actually paid to look after this.
 -  - -         Maintained:     Someone actually looks after it.
 -  - -         Odd Fixes:      It has a maintainer but they don't have time to do
 -  - -                         much other than throw the odd patch in. See below..
 -  - -         Orphan:         No current maintainer [but maybe you could take the
 -  - -                         role as you write your new code].
 -  - -         Obsolete:       Old code. Something tagged obsolete generally means
 -  - -                         it has been replaced by a better system and you
 -  - -                         should be using that.
 +  + + Maintainers List (try to look for most precise areas first)
        
 -  - - F: Files and directories with wildcard patterns.
 -  - -    A trailing slash includes all files and subdirectory files.
 -  - -         F:      drivers/net/    all files in and below drivers/net
 -  - -         F:      drivers/net/*   all files in drivers/net, but not below
 -  - -         F:      */net/*         all files in "any top level directory"/net
 -  - -    One pattern per line.  Multiple F: lines acceptable.
 -  - - X: Files and directories that are NOT maintained, same rules as F:
 -  - -    Files exclusions are tested before file matches.
 -  - -    Can be useful for excluding a specific subdirectory, for instance:
 -  - -         F:      net/
 -  - -         X:      net/ipv6/
 -  - -    matches all files in and below net excluding net/ipv6/
 +  + +                 -----------------------------------
        
        3C505 NETWORK DRIVER
    -   P:      Philip Blundell
    -   M:      philb@gnu.org
    +   M:      Philip Blundell <philb@gnu.org>
        L:      netdev@vger.kernel.org
        S:      Maintained
        F:      drivers/net/3c505*
@@@@@@@@@ -177,12 -169,12 -177,12 -177,12 -180,15 -177,12 -169,12 -177,12 +177,12 @@@@@@@@@ F:  drivers/net/*8390
        F:      drivers/net/ax88796.c
        
        9P FILE SYSTEM
    -   P:      Eric Van Hensbergen
    -   M:      ericvh@gmail.com
    -   P:      Ron Minnich
    -   M:      rminnich@sandia.gov
    -   P:      Latchesar Ionkov
    -   M:      lucho@ionkov.net
    +   M:      Eric Van Hensbergen <ericvh@gmail.com>
    +   M:      Ron Minnich <rminnich@sandia.gov>
    +   M:      Latchesar Ionkov <lucho@ionkov.net>
        L:      v9fs-developer@lists.sourceforge.net
        W:      http://swik.net/v9fs
 -  - - T:      git git://git.kernel.org/pub/scm/linux/kernel/ericvh/v9fs.git
 +  + + T:      git git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs.git
        S:      Maintained
        F:      Documentation/filesystems/9p.txt
        F:      fs/9p/
@@@@@@@@@ -532,15 -508,9 -516,9 -532,15 -570,10 -532,15 -508,9 -516,9 +532,15 @@@@@@@@@ ARM PRIMECELL MMCI PL180/1 DRIVE
        S:      Orphan
        F:      drivers/mmc/host/mmci.*
        
 ++ + ++ARM PRIMECELL BUS SUPPORT
 ++ + ++M:      Russell King <linux@arm.linux.org.uk>
 ++ + ++S:      Maintained
 ++ + ++F:      drivers/amba/
 ++ + ++F:      include/linux/amba/bus.h
 ++ + ++
        ARM/ADI ROADRUNNER MACHINE SUPPORT
    -   P:      Lennert Buytenhek
    -   M:      kernel@wantstofly.org
    -   L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
    +   M:      Lennert Buytenhek <kernel@wantstofly.org>
    +   L:      linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
        S:      Maintained
        F:      arch/arm/mach-ixp23xx/
        F:      arch/arm/mach-ixp23xx/include/mach/
@@@@@@@@@ -768,19 -738,11 -746,11 -768,11 -791,13 -768,11 -738,11 -746,11 +768,19 @@@@@@@@@ F:  arch/arm/mach-pxa/mioa701.
        S:      Maintained
        
        ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT
    -   P:      Michael Petchkovsky
    -   M:      mkpetch@internode.on.net
    +   M:      Michael Petchkovsky <mkpetch@internode.on.net>
        S:      Maintained
        
 +++++++ARM/NOMADIK ARCHITECTURE
 +++++++M:     Alessandro Rubini <rubini@unipv.it>
 +++++++M:     STEricsson <STEricsson_nomadik_linux@list.st.com>
 +++++++L:     linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 +++++++S:     Maintained
 +++++++F:     arch/arm/mach-nomadik/
 +++++++F:     arch/arm/plat-nomadik/
 +++++++
        ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT
    -   P:      Nelson Castillo
    -   M:      arhuaco@freaks-unidos.net
    +   M:      Nelson Castillo <arhuaco@freaks-unidos.net>
        L:      openmoko-kernel@lists.openmoko.org (subscribers-only)
        W:      http://wiki.openmoko.org/wiki/Neo_FreeRunner
        S:      Supported
@@@@@@@@@ -923,9 -885,9 -893,9 -915,9 -900,10 -915,9 -885,9 -893,15 +923,15 @@@@@@@@@ L:        linux-arm-kernel@lists.infradead.or
        W:      http://www.mcuos.com
        S:      Maintained
        
+++++++ ARM/U8500 ARM ARCHITECTURE
+++++++ M:      Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+++++++ L:      linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+++++++ S:      Maintained
+++++++ F:      arch/arm/mach-ux500/
+++++++ 
        ARM/VFP SUPPORT
    -   P:      Russell King
    -   M:      linux@arm.linux.org.uk
    -   L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
    +   M:      Russell King <linux@arm.linux.org.uk>
    +   L:      linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
        W:      http://www.arm.linux.org.uk/
        S:      Maintained
        F:      arch/arm/vfp/
@@@@@@@@@ -1028,8 -991,8 -998,8 -1020,8 -1019,9 -1020,8 -991,8 -1004,8 +1034,8 @@@@@@@@@ S:     Maintaine
        F:      drivers/net/atlx/
        
        ATM
    -   P:      Chas Williams
    -   M:      chas@cmf.nrl.navy.mil
    -   L:      linux-atm-general@lists.sourceforge.net (subscribers-only)
    +   M:      Chas Williams <chas@cmf.nrl.navy.mil>
 -    - L:      linux-atm-general@lists.sourceforge.net (subscribers-only)
 +  + + L:      linux-atm-general@lists.sourceforge.net (moderated for non-subscribers)
        L:      netdev@vger.kernel.org
        W:      http://linux-atm.sourceforge.net
        S:      Maintained
@@@@@@@@@ -1056,8 -1019,8 -1026,8 -1048,8 -1051,9 -1048,8 -1019,8 -1032,8 +1062,8 @@@@@@@@@ S:  Supporte
        F:      drivers/serial/atmel_serial.c
        
        ATMEL LCDFB DRIVER
    -   P:      Nicolas Ferre
    -   M:      nicolas.ferre@atmel.com
    -   L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
    +   M:      Nicolas Ferre <nicolas.ferre@atmel.com>
 --   --L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 ++ + ++L:      linux-fbdev@vger.kernel.org
        S:      Maintained
        F:      drivers/video/atmel_lcdfb.c
        F:      include/video/atmel_lcdc.h
@@@@@@@@@ -1273,14 -1236,15 -1243,14 -1265,14 -1303,9 -1265,14 -1236,15 -1249,14 +1279,14 @@@@@@@@@ L:  netdev@vger.kernel.or
        S:      Supported
        F:      drivers/net/tg3.*
        
 -    - P:      Jing Huang
 -    - M:      huangj@brocade.com
 -    - L:      linux-scsi@vger.kernel.org
 -    - S:      Supported
 -    - F:      drivers/scsi/bfa/
    +   BROCADE BFA FC SCSI DRIVER
 +  + + M:      Jing Huang <huangj@brocade.com>
 +  + + L:      linux-scsi@vger.kernel.org
 +  + + S:      Supported
 +  + + F:      drivers/scsi/bfa/
    +   
        BSG (block layer generic sg v4 driver)
    -   P:      FUJITA Tomonori
    -   M:      fujita.tomonori@lab.ntt.co.jp
    +   M:      FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
        L:      linux-scsi@vger.kernel.org
        S:      Supported
        F:      block/bsg.c
@@@@@@@@@ -1515,8 -1479,7 -1485,8 -1507,8 -1581,8 -1507,8 -1479,7 -1491,8 +1521,8 @@@@@@@@@ F:  kernel/cgroup
        F:      mm/*cgroup*
        
        CORETEMP HARDWARE MONITORING DRIVER
    -   P:      Rudolf Marek
    -   M:      r.marek@assembler.cz
    +   M:      Rudolf Marek <r.marek@assembler.cz>
 +  + + M:      Huaxu Wan <huaxu.wan@intel.com>
        L:      lm-sensors@lm-sensors.org
        S:      Maintained
        F:      Documentation/hwmon/coretemp
@@@@@@@@@ -2165,9 -2128,9 -2135,9 -2157,9 -2334,10 -2157,9 -2128,9 -2141,9 +2171,9 @@@@@@@@@ S: Maintaine
        F:      drivers/i2c/busses/i2c-cpm.c
        
        FREESCALE IMX / MXC FRAMEBUFFER DRIVER
    -   P:      Sascha Hauer
    -   M:      kernel@pengutronix.de
    -   L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
    -   L:      linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
    +   M:      Sascha Hauer <kernel@pengutronix.de>
 --   --L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 ++ + ++L:      linux-fbdev@vger.kernel.org
    +   L:      linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
        S:      Maintained
        F:      arch/arm/plat-mxc/include/mach/imxfb.h
        F:      drivers/video/imxfb.c
@@@@@@@@@ -2188,8 -2151,8 -2158,8 -2180,8 -2361,9 -2180,8 -2151,8 -2164,8 +2194,8 @@@@@@@@@ S:  Supporte
        F:      arch/powerpc/sysdev/qe_lib/
        F:      arch/powerpc/include/asm/*qe.h
        
 -    - FREESCALE USB PERIPHERIAL DRIVERS
    -   FREESCALE HIGHSPEED USB DEVICE DRIVER
    -   P:      Li Yang
    -   M:      leoli@freescale.com
 +  + + FREESCALE USB PERIPHERAL DRIVERS
    +   M:      Li Yang <leoli@freescale.com>
        L:      linux-usb@vger.kernel.org
        L:      linuxppc-dev@ozlabs.org
        S:      Maintained
@@@@@@@@@ -2239,8 -2202,20 -2209,8 -2231,8 -2420,19 -2231,8 -2202,20 -2215,8 +2245,8 @@@@@@@@@ F:       Documentation/filesystems/caching
        F:      fs/fscache/
        F:      include/linux/fscache*.h
        
 -    - TRACING
 -    - M:      Steven Rostedt <rostedt@goodmis.org>
 -    - M:      Frederic Weisbecker <fweisbec@gmail.com>
 -    - M:      Ingo Molnar <mingo@redhat.com>
 -    - T:      git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git tracing/core
    -   FTRACE
    -   P:      Steven Rostedt
    -   M:      rostedt@goodmis.org
 -  - - S:      Maintained
 -  - - F:      Documentation/trace/ftrace.txt
 -  - - F:      arch/*/*/*/ftrace.h
 -  - - F:      arch/*/kernel/ftrace.c
 -    - F:      include/*/ftrace.h include/trace/ include/linux/trace*.h
    -   F:      include/*/ftrace.h
 -  - - F:      kernel/trace/
 -  - - 
        FUJITSU FR-V (FRV) PORT
    -   P:      David Howells
    -   M:      dhowells@redhat.com
    +   M:      David Howells <dhowells@redhat.com>
        S:      Maintained
        F:      arch/frv/
        
@@@@@@@@@ -2296,14 -2271,15 -2266,14 -2288,14 -2495,9 -2288,14 -2271,15 -2272,14 +2302,14 @@@@@@@@@ T:  git git://git.kernel.org/pub/scm/lin
        S:      Maintained
        F:      include/asm-generic
        
 -    - M:      Michael S. Tsirkin <mst@redhat.com>
    +   GENERIC UIO DRIVER FOR PCI DEVICES
 -    - L:      linux-kernel@vger.kernel.org
 +  + + M:      "Michael S. Tsirkin" <mst@redhat.com>
    +   L:      kvm@vger.kernel.org
    +   S:      Supported
    +   F:      drivers/uio/uio_pci_generic.c
    +   
        GFS2 FILE SYSTEM
    -   P:      Steven Whitehouse
    -   M:      swhiteho@redhat.com
    +   M:      Steven Whitehouse <swhiteho@redhat.com>
        L:      cluster-devel@redhat.com
        W:      http://sources.redhat.com/cluster/
        T:      git git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes.git
@@@@@@@@@ -2342,15 -2318,8 -2312,8 -2334,15 -2540,9 -2334,15 -2318,8 -2318,8 +2348,15 @@@@@@@@@ T:      git git://git.kernel.org/pub/scm/lin
        S:      Maintained
        F:      drivers/media/video/gspca/finepix.c
        
 ++ + ++GSPCA GL860 SUBDRIVER
 ++ + ++M:      Olivier Lorin <o.lorin@laposte.net>
 ++ + ++L:      linux-media@vger.kernel.org
 ++ + ++T:      git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 ++ + ++S:      Maintained
 ++ + ++F:      drivers/media/video/gspca/gl860/
 ++ + ++
        GSPCA M5602 SUBDRIVER
    -   P:      Erik Andren
    -   M:      erik.andren@gmail.com
    +   M:      Erik Andren <erik.andren@gmail.com>
        L:      linux-media@vger.kernel.org
        T:      git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
        S:      Maintained
        F:      Documentation/i2c/
        F:      drivers/i2c/
        F:      include/linux/i2c.h
 -- - --F:      include/linux/i2c-dev.h
 -- - --F:      include/linux/i2c-id.h
 ++ + ++F:      include/linux/i2c-*.h
        
        I2C-TINY-USB DRIVER
    -   P:      Till Harbaum
    -   M:      till@harbaum.org
    +   M:      Till Harbaum <till@harbaum.org>
        L:      linux-i2c@vger.kernel.org
        W:      http://www.harbaum.org/till/i2c_tiny_usb
        S:      Maintained
        F:      drivers/input/
        
        INTEL FRAMEBUFFER DRIVER (excluding 810 and 815)
    -   P:      Sylvain Meyer
    -   M:      sylvain.meyer@worldonline.fr
    -   L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
    +   M:      Sylvain Meyer <sylvain.meyer@worldonline.fr>
 --   --L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 ++ + ++L:      linux-fbdev@vger.kernel.org
        S:      Maintained
        F:      Documentation/fb/intelfb.txt
        F:      drivers/video/intelfb/
        
        INTEL 810/815 FRAMEBUFFER DRIVER
    -   P:      Antonino Daplas
    -   M:      adaplas@gmail.com
    -   L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
    +   M:      Antonino Daplas <adaplas@gmail.com>
 --   --L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 ++ + ++L:      linux-fbdev@vger.kernel.org
        S:      Maintained
        F:      drivers/video/i810/
        
@@@@@@@@@ -2858,8 -2828,8 -2822,8 -2850,8 -3129,9 -2850,8 -2828,8 -2828,8 +2864,8 @@@@@@@@@ S:  Supporte
        F:      drivers/infiniband/hw/ipath/
        
        IPMI SUBSYSTEM
    -   P:      Corey Minyard
    -   M:      minyard@acm.org
    -   L:      openipmi-developer@lists.sourceforge.net
    +   M:      Corey Minyard <minyard@acm.org>
 -    - L:      openipmi-developer@lists.sourceforge.net
 +  + + L:      openipmi-developer@lists.sourceforge.net (moderated for non-subscribers)
        W:      http://openipmi.sourceforge.net/
        S:      Supported
        F:      Documentation/IPMI.txt
        F:      scripts/Makefile.*
        
        KERNEL JANITORS
    -   P:      Several
        L:      kernel-janitors@vger.kernel.org
 -  - - W:      http://www.kerneljanitors.org/
 -  - - S:      Maintained
 +  + + W:      http://janitor.kernelnewbies.org/
 +  + + S:      Odd Fixes
        
        KERNEL NFSD, SUNRPC, AND LOCKD SERVERS
    -   P:      J. Bruce Fields
    -   M:      bfields@fieldses.org
    -   P:      Neil Brown
    -   M:      neilb@suse.de
    +   M:      "J. Bruce Fields" <bfields@fieldses.org>
    +   M:      Neil Brown <neilb@suse.de>
        L:      linux-nfs@vger.kernel.org
        W:      http://nfs.sourceforge.net/
        S:      Supported
@@@@@@@@@ -3119,17 -3089,13 -3083,17 -3111,17 -3425,17 -3111,17 -3089,13 -3089,17 +3125,17 @@@@@@@@@ F: include/linux/kgdb.
        F:      kernel/kgdb.c
        
        KMEMCHECK
    -   P:      Vegard Nossum
    -   M:      vegardno@ifi.uio.no
    -   P       Pekka Enberg
    -   M:      penberg@cs.helsinki.fi
    -   L:      linux-kernel@vger.kernel.org
    +   M:      Vegard Nossum <vegardno@ifi.uio.no>
 -    - P       Pekka Enberg
 -    - M:      penberg@cs.helsinki.fi
 +  + + M:      Pekka Enberg <penberg@cs.helsinki.fi>
        S:      Maintained
 +  + + F:      Documentation/kmemcheck.txt
 +  + + F:      arch/x86/include/asm/kmemcheck.h
 +  + + F:      arch/x86/mm/kmemcheck/
 +  + + F:      include/linux/kmemcheck.h
 +  + + F:      mm/kmemcheck.c
        
        KMEMLEAK
    -   P:      Catalin Marinas
    -   M:      catalin.marinas@arm.com
    -   L:      linux-kernel@vger.kernel.org
    +   M:      Catalin Marinas <catalin.marinas@arm.com>
        S:      Maintained
        F:      Documentation/kmemleak.txt
        F:      include/linux/kmemleak.h
@@@@@@@@@ -3426,8 -3392,8 -3390,8 -3418,8 -3775,9 -3418,8 -3392,8 -3396,8 +3432,8 @@@@@@@@@ W:  http://www.syskonnect.co
        S:      Supported
        
        MATROX FRAMEBUFFER DRIVER
    -   P:      Petr Vandrovec
    -   M:      vandrove@vc.cvut.cz
    -   L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
    +   M:      Petr Vandrovec <vandrove@vc.cvut.cz>
 --   --L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 ++ + ++L:      linux-fbdev@vger.kernel.org
        S:      Maintained
        F:      drivers/video/matrox/matroxfb_*
        F:      include/linux/matroxfb.h
@@@@@@@@@ -3656,7 -3622,7 -3620,7 -3648,7 -4044,6 -3648,7 -3622,7 -3626,7 +3662,7 @@@@@@@@@ L:  netfilter@vger.kernel.or
        L:      coreteam@netfilter.org
        W:      http://www.netfilter.org/
        W:      http://www.iptables.org/
 -    - T:      git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6.git
 +  + + T:      git git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6.git
        S:      Supported
        F:      include/linux/netfilter*
        F:      include/linux/netfilter/
@@@@@@@@@ -3690,20 -3656,19 -3654,20 -3682,20 -4080,12 -3682,20 -3656,19 -3660,20 +3696,20 @@@@@@@@@ F: Documentation/blockdev/nbd.tx
        F:      drivers/block/nbd.c
        F:      include/linux/nbd.h
        
    +   NETWORK DROP MONITOR
    +   M:      Neil Horman <nhorman@tuxdriver.com>
    +   L:      netdev@vger.kernel.org
    +   S:      Maintained
    +   W:      https://fedorahosted.org/dropwatch/
    +   F:      net/core/drop_monitor.c
    +   
        NETWORKING [GENERAL]
    -   P:      David S. Miller
    -   M:      davem@davemloft.net
    +   M:      "David S. Miller" <davem@davemloft.net>
        L:      netdev@vger.kernel.org
        W:      http://www.linuxfoundation.org/en/Net
    +   W:      http://patchwork.ozlabs.org/project/netdev/list/
        T:      git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
 +  + + T:      git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6.git
        S:      Maintained
        F:      net/
        F:      include/net/
@@@@@@@@@ -3813,14 -3778,14 -3777,14 -3805,14 -4204,16 -3805,14 -3778,14 -3783,14 +3819,14 @@@@@@@@@ F: Documentation/filesystems/ntfs.tx
        F:      fs/ntfs/
        
        NVIDIA (rivafb and nvidiafb) FRAMEBUFFER DRIVER
    -   P:      Antonino Daplas
    -   M:      adaplas@gmail.com
    -   L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
    +   M:      Antonino Daplas <adaplas@gmail.com>
 --   --L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 ++ + ++L:      linux-fbdev@vger.kernel.org
        S:      Maintained
        F:      drivers/video/riva/
        F:      drivers/video/nvidia/
        
        OMAP SUPPORT
 -    - M:      "Tony Lindgren <tony@atomide.com>" <tony@atomide.com>
    -   P:      Tony Lindgren <tony@atomide.com>
    -   M:      tony@atomide.com
 +  + + M:      Tony Lindgren <tony@atomide.com>
        L:      linux-omap@vger.kernel.org
        W:      http://www.muru.com/linux/omap/
        W:      http://linux.omap.com/
@@@@@@@@@ -3848,8 -3813,8 -3812,8 -3840,8 -4244,9 -3840,8 -3813,8 -3818,8 +3854,8 @@@@@@@@@ S:  Maintaine
        F:      sound/soc/omap/
        
        OMAP FRAMEBUFFER SUPPORT
    -   P:      Imre Deak
    -   M:      imre.deak@nokia.com
    -   L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
    +   M:      Imre Deak <imre.deak@nokia.com>
 --   --L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 ++ + ++L:      linux-fbdev@vger.kernel.org
        L:      linux-omap@vger.kernel.org
        S:      Maintained
        F:      drivers/video/omap/
@@@@@@@@@ -3925,17 -3890,8 -3889,17 -3917,17 -4328,9 -3917,17 -3890,8 -3895,17 +3931,17 @@@@@@@@@ S:    Maintaine
        F:      Documentation/i2c/busses/i2c-ocores
        F:      drivers/i2c/busses/i2c-ocores.c
        
 +  + + OPEN FIRMWARE AND FLATTENED DEVICE TREE
 +  + + M:      Grant Likely <grant.likely@secretlab.ca>
 +  + + L:      devicetree-discuss@lists.ozlabs.org
 +  + + W:      http://fdt.secretlab.ca
 +  + + S:      Maintained
 +  + + F:      drivers/of
 +  + + F:      include/linux/of*.h
 +  + + K:      of_get_property
 +  + + 
        OPROFILE
    -   P:      Robert Richter
    -   M:      robert.richter@amd.com
    +   M:      Robert Richter <robert.richter@amd.com>
        L:      oprofile-list@lists.sf.net
        S:      Maintained
        F:      arch/*/oprofile/
@@@@@@@@@ -4354,15 -4310,15 -4318,15 -4346,15 -4782,17 -4346,15 -4310,15 -4324,15 +4360,15 @@@@@@@@@ F: include/linux/qnx4_fs.
        F:      include/linux/qnxtypes.h
        
        RADEON FRAMEBUFFER DISPLAY DRIVER
    -   P:      Benjamin Herrenschmidt
    -   M:      benh@kernel.crashing.org
    -   L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
    +   M:      Benjamin Herrenschmidt <benh@kernel.crashing.org>
 --   --L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 ++ + ++L:      linux-fbdev@vger.kernel.org
        S:      Maintained
        F:      drivers/video/aty/radeon*
        F:      include/linux/radeonfb.h
        
        RAGE128 FRAMEBUFFER DISPLAY DRIVER
    -   P:      Paul Mackerras
    -   M:      paulus@samba.org
    -   L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
    +   M:      Paul Mackerras <paulus@samba.org>
 --   --L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 ++ + ++L:      linux-fbdev@vger.kernel.org
        S:      Maintained
        F:      drivers/video/aty/aty128fb.c
        
        F:      fs/reiserfs/
        
        RFKILL
    -   P:      Johannes Berg
    -   M:      johannes@sipsolutions.net
    +   M:      Johannes Berg <johannes@sipsolutions.net>
        L:      linux-wireless@vger.kernel.org
        S:      Maintained
 -  - - F       Documentation/rfkill.txt
 +  + + F:      Documentation/rfkill.txt
        F:      net/rfkill/
        
        RISCOM8 DRIVER
@@@@@@@@@ -4500,8 -4454,8 -4464,8 -4492,8 -4947,9 -4492,8 -4454,8 -4470,8 +4506,8 @@@@@@@@@ S:  Maintaine
        F:      drivers/net/wireless/rtl818x/rtl8187*
        
        S3 SAVAGE FRAMEBUFFER DRIVER
    -   P:      Antonino Daplas
    -   M:      adaplas@gmail.com
    -   L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
    +   M:      Antonino Daplas <adaplas@gmail.com>
 --   --L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 ++ + ++L:      linux-fbdev@vger.kernel.org
        S:      Maintained
        F:      drivers/video/savage/
        
        F:      kernel/sched*
        F:      include/linux/sched.h
        
 -    - P:      Chen Liqin
 -    - M:      liqin.chen@sunplusct.com
 -    - P:      Lennox Wu
 -    - M:      lennox.wu@gmail.com
    +   SCORE ARCHITECTURE
 +  + + M:      Chen Liqin <liqin.chen@sunplusct.com>
 +  + + M:      Lennox Wu <lennox.wu@gmail.com>
    +   W:      http://www.sunplusct.com
    +   S:      Supported
 +  + + F:      arch/score/
    +   
        SCSI CDROM DRIVER
    -   P:      Jens Axboe
    -   M:      axboe@kernel.dk
    +   M:      Jens Axboe <axboe@kernel.dk>
        L:      linux-scsi@vger.kernel.org
        W:      http://www.kernel.dk
        S:      Maintained
        F:      drivers/mmc/host/sdricoh_cs.c
        
        SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER
 -    - S:     Orphan
 -    - L:     linux-mmc@vger.kernel.org
 -    - F:     drivers/mmc/host/sdhci.*
    -   P:      Pierre Ossman
    -   M:      pierre@ossman.eu
    -   L:      sdhci-devel@lists.ossman.eu
    -   S:      Maintained
 +  + + S:      Orphan
 +  + + L:      linux-mmc@vger.kernel.org
 +  + + F:      drivers/mmc/host/sdhci.*
        
        SECURE DIGITAL HOST CONTROLLER INTERFACE, OPEN FIRMWARE BINDINGS (SDHCI-OF)
    -   P:      Anton Vorontsov
    -   M:      avorontsov@ru.mvista.com
    +   M:      Anton Vorontsov <avorontsov@ru.mvista.com>
        L:      linuxppc-dev@ozlabs.org
 -    - L:     linux-mmc@vger.kernel.org
    -   L:      sdhci-devel@lists.ossman.eu
 +  + + L:      linux-mmc@vger.kernel.org
        S:      Maintained
 -    - F:     drivers/mmc/host/sdhci-of.*
    -   F:      drivers/mmc/host/sdhci.*
 +  + + F:      drivers/mmc/host/sdhci-of.*
        
        SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) SAMSUNG DRIVER
    -   P:      Ben Dooks
    -   M:      ben-linux@fluff.org
    -   L:      sdhci-devel@lists.ossman.eu
    +   M:      Ben Dooks <ben-linux@fluff.org>
 -    - L:     linux-mmc@vger.kernel.org
 +  + + L:      linux-mmc@vger.kernel.org
        S:      Maintained
        F:      drivers/mmc/host/sdhci-s3c.c
        
        SECURITY SUBSYSTEM
    -   P:      James Morris
    -   M:      jmorris@namei.org
    +   M:      James Morris <jmorris@namei.org>
        L:      linux-security-module@vger.kernel.org (suggested Cc:)
 -  - - T:      git git://www.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
 +  + + T:      git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
        W:      http://security.wiki.kernel.org/
        S:      Supported
        F:      security/
        F:      include/linux/ata.h
        F:      include/linux/libata.h
        
 -    - P:     Jayamohan Kallickal
 -    - M:     jayamohank@serverengines.com
 -    - L:     linux-scsi@vger.kernel.org
 -    - W:     http://www.serverengines.com
 -    - S:     Supported
 -    - F:     drivers/scsi/be2iscsi/
    +   SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER
 +  + + M:      Jayamohan Kallickal <jayamohank@serverengines.com>
 +  + + L:      linux-scsi@vger.kernel.org
 +  + + W:      http://www.serverengines.com
 +  + + S:      Supported
 +  + + F:      drivers/scsi/be2iscsi/
    +   
        SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
    -   P:      Sathya Perla
    -   M:      sathyap@serverengines.com
    -   P:      Subbu Seetharaman
    -   M:      subbus@serverengines.com
    +   M:      Sathya Perla <sathyap@serverengines.com>
    +   M:      Subbu Seetharaman <subbus@serverengines.com>
        L:      netdev@vger.kernel.org
        W:      http://www.serverengines.com
        S:      Supported
@@@@@@@@@ -4771,15 -4727,16 -4735,15 -4763,15 -5246,12 -4763,15 -4727,16 -4741,15 +4777,15 @@@@@@@@@ F: drivers/serial/serial_lh7a40x.
        F:      drivers/usb/gadget/lh7a40*
        F:      drivers/usb/host/ohci-lh7a40*
        
    -   SHPC HOTPLUG DRIVER
    -   P:      Kristen Carlson Accardi
    -   M:      kristen.c.accardi@intel.com
    -   L:      linux-pci@vger.kernel.org
    +   SIMPLE FIRMWARE INTERFACE (SFI)
 -    - P:      Len Brown
 -    - M:      lenb@kernel.org
 +  + + M:      Len Brown <lenb@kernel.org>
    +   L:      sfi-devel@simplefirmware.org
    +   W:      http://simplefirmware.org/
    +   T:      git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6.git
        S:      Supported
    -   F:      drivers/pci/hotplug/shpchp*
    +   F:      arch/x86/kernel/*sfi*
    +   F:      drivers/sfi/
    +   F:      include/linux/sfi*.h
        
        SIMTEC EB110ATX (Chalice CATS)
        P:      Ben Dooks
@@@@@@@@@ -5220,29 -5177,15 -5184,29 -5212,29 -5746,11 -5212,29 -5177,15 -5190,29 +5226,29 @@@@@@@@@ L: tpmdd-devel@lists.sourceforge.net (m
        S:      Maintained
        F:      drivers/char/tpm/
        
 +  + + TRACING
 +  + + M:      Steven Rostedt <rostedt@goodmis.org>
 +  + + M:      Frederic Weisbecker <fweisbec@gmail.com>
 +  + + M:      Ingo Molnar <mingo@redhat.com>
 +  + + T:      git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git tracing/core
 +  + + S:      Maintained
 +  + + F:      Documentation/trace/ftrace.txt
 +  + + F:      arch/*/*/*/ftrace.h
 +  + + F:      arch/*/kernel/ftrace.c
 +  + + F:      include/*/ftrace.h
 +  + + F:      include/linux/trace*.h
 +  + + F:      include/trace/
 +  + + F:      kernel/trace/
 +  + + 
        TRIVIAL PATCHES
    -   P:      Jiri Kosina
    -   M:      trivial@kernel.org
    +   M:      Jiri Kosina <trivial@kernel.org>
        T:      git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git
        S:      Maintained
    +   
    +   TTY LAYER
    +   M:      Greg Kroah-Hartman <gregkh@suse.de>
    +   S:      Maintained
    +   T:      quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
        F:      drivers/char/tty_*
        F:      drivers/serial/serial_core.c
        F:      include/linux/serial_core.h
@@@@@@@@@ -5663,8 -5606,8 -5627,8 -5655,8 -6235,9 -5655,8 -5606,8 -5633,8 +5669,8 @@@@@@@@@ T:  git git://git.kernel.org/pub/scm/uti
        S:      Maintained
        
        UVESAFB DRIVER
    -   P:      Michal Januszewski
    -   M:      spock@gentoo.org
    -   L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
    +   M:      Michal Januszewski <spock@gentoo.org>
 --   --L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 ++ + ++L:      linux-fbdev@vger.kernel.org
        W:      http://dev.gentoo.org/~spock/projects/uvesafb/
        S:      Maintained
        F:      Documentation/fb/uvesafb.txt
@@@@@@@@@ -5695,9 -5638,9 -5659,9 -5687,9 -6273,11 -5687,9 -5638,9 -5665,9 +5701,9 @@@@@@@@@ S: Maintaine
        F:      drivers/mmc/host/via-sdmmc.c
        
        VIA UNICHROME(PRO)/CHROME9 FRAMEBUFFER DRIVER
    -   P:      Joseph Chan
    -   M:      JosephChan@via.com.tw
    -   P:      Scott Fang
    -   M:      ScottFang@viatech.com.cn
    -   L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
    +   M:      Joseph Chan <JosephChan@via.com.tw>
    +   M:      Scott Fang <ScottFang@viatech.com.cn>
 --   --L:      linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 ++ + ++L:      linux-fbdev@vger.kernel.org
        S:      Maintained
        F:      drivers/video/via/
        
        F:      drivers/vlynq/vlynq.c
        F:      include/linux/vlynq.h
        
 -    - M:     Shreyas Bhatewara <sbhatewara@vmware.com>
 -    - M:     VMware, Inc. <pv-drivers@vmware.com>
 -    - L:     netdev@vger.kernel.org
 -    - S:     Maintained
 -    - F:     drivers/net/vmxnet3/
    +   VMWARE VMXNET3 ETHERNET DRIVER
 +  + + M:      Shreyas Bhatewara <sbhatewara@vmware.com>
 +  + + M:      "VMware, Inc." <pv-drivers@vmware.com>
 +  + + L:      netdev@vger.kernel.org
 +  + + S:      Maintained
 +  + + F:      drivers/net/vmxnet3/
    +   
        VOLTAGE AND CURRENT REGULATOR FRAMEWORK
    -   P:      Liam Girdwood
    -   M:      lrg@slimlogic.co.uk
    -   P:      Mark Brown
    -   M:      broonie@opensource.wolfsonmicro.com
    +   M:      Liam Girdwood <lrg@slimlogic.co.uk>
    +   M:      Mark Brown <broonie@opensource.wolfsonmicro.com>
        W:      http://opensource.wolfsonmicro.com/node/15
        W:      http://www.slimlogic.co.uk/?p=48
        T:      git git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6.git
@@@@@@@@@ -5799,13 -5742,14 -5763,13 -5791,13 -6386,9 -5791,13 -5742,14 -5769,13 +5805,13 @@@@@@@@@ L:  linux-scsi@vger.kernel.or
        S:      Maintained
        F:      drivers/scsi/wd7000.c
        
 -    - P:      David Härdeman
 -    - M:      david@hardeman.nu
    +   WINBOND CIR DRIVER
 +  + + M:      David Härdeman <david@hardeman.nu>
    +   S:      Maintained
    +   F:      drivers/input/misc/winbond-cir.c
    +   
        WIMAX STACK
    -   P:      Inaky Perez-Gonzalez
    -   M:      inaky.perez-gonzalez@intel.com
    +   M:      Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
        M:      linux-wimax@intel.com
        L:      wimax@linuxwimax.org
        S:      Supported
        F:      drivers/input/touchscreen/*wm97*
        F:      include/linux/wm97xx.h
        
 -    - P:      Mark Brown
 -    - M:      broonie@opensource.wolfsonmicro.com
 -    - L:      linux-kernel@vger.kernel.org
    +   WOLFSON MICROELECTRONICS PMIC DRIVERS
 +  + + M:      Mark Brown <broonie@opensource.wolfsonmicro.com>
    +   T:      git git://opensource.wolfsonmicro.com/linux-2.6-audioplus
    +   W:      http://opensource.wolfsonmicro.com/node/8
    +   S:      Supported
    +   F:      drivers/leds/leds-wm83*.c
    +   F:      drivers/mfd/wm8*.c
    +   F:      drivers/power/wm83*.c
    +   F:      drivers/rtc/rtc-wm83*.c
    +   F:      drivers/regulator/wm8*.c
    +   F:      drivers/video/backlight/wm83*_bl.c
    +   F:      drivers/watchdog/wm83*_wdt.c
    +   F:      include/linux/mfd/wm831x/
    +   F:      include/linux/mfd/wm8350/
    +   F:      include/linux/mfd/wm8400/
    +   F:      sound/soc/codecs/wm8350.c
    +   F:      sound/soc/codecs/wm8400.c
    +   
        X.25 NETWORK LAYER
    -   P:      Henner Eisen
    -   M:      eis@baty.hanse.de
    +   M:      Henner Eisen <eis@baty.hanse.de>
        L:      linux-x25@vger.kernel.org
        S:      Maintained
        F:      Documentation/networking/x25*
@@@@@@@@@ -156,13 -156,18 -156,13 -156,13 -144,6 -156,13 -156,13 -156,13 +156,18 @@@@@@@@@ config MACH_YL920
                help
                  Select this if you are using the ucDragon YL-9200 board.
        
    +   config MACH_CPUAT91
    +           bool "Eukrea CPUAT91"
    +           depends on ARCH_AT91RM9200
    +           help
    +             Select this if you are using the Eukrea Electromatique's
    +             CPUAT91 board <http://www.eukrea.com/>.
    +   
+ ++++++config MACH_ECO920
+ ++++++        bool "eco920"
+ ++++++        help
+ ++++++          Select this if you are using the eco920 board
+ ++++++
        endif
        
        # ----------------------------------------------------------
@@@@@@@@@ -315,39 -327,30 -315,39 -315,39 -274,7 -315,39 -322,30 -315,39 +320,39 @@@@@@@@@ config MACH_AT91SAM9G20E
                bool "Atmel AT91SAM9G20-EK Evaluation Kit"
                depends on ARCH_AT91SAM9G20
                help
 -  - -           Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit.
 +  + +           Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
 +  + +           that embeds only one SD/MMC slot.
 +  + + 
 +  + + config MACH_AT91SAM9G20EK_2MMC
 +  + +         bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
 +  + +         depends on ARCH_AT91SAM9G20
 +  + +         help
 +  + +           Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
 +  + +           with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
 +  + +           onwards.
    +   
    +   config MACH_CPU9G20
    +           bool "Eukrea CPU9G20 board"
    +           depends on ARCH_AT91SAM9G20
    +           help
    +             Select this if you are using a Eukrea Electromatique's
    +             CPU9G20 Board <http://www.eukrea.com/>
    +   
    +   endif
    +   
    +   # ----------------------------------------------------------
    +   
    +   if ARCH_AT91SAM9G45
    +   
    +   comment "AT91SAM9G45 Board Type"
    +   
    +   config MACH_AT91SAM9G45EKES
    +           bool "Atmel AT91SAM9G45-EKES Evaluation Kit"
    +           depends on ARCH_AT91SAM9G45
    +           help
    +             Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
    +             "ES" at the end of the name means that this board is an
    +             Engineering Sample.
        
        endif
        
@@@@@@@@@ -394,7 -397,7 -394,7 -394,7 -321,7 -394,7 -392,7 -394,7 +399,7 @@@@@@@@@ config MTD_AT91_DATAFLASH_CAR
        
        config MTD_NAND_ATMEL_BUSWIDTH_16
                bool "Enable 16-bit data bus interface to NAND flash"
 -    -         depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
    -           depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91CAP9ADK)
 +  + +         depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G20EK_2MMC || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
                help
                  On AT91SAM926x boards both types of NAND flash can be present
                  (8 and 16 bit data bus width).
index 332b784,003f4f9,332b784,332b784,0000000,332b784,d581cff,332b784..a57af3e
mode 100644,100644,100644,100644,000000,100644,100644,100644..100644
--- /dev/null
 -    - #if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
    +   /*
    +    *  On-Chip devices setup code for the AT91SAM9G45 family
    +    *
    +    *  Copyright (C) 2009 Atmel Corporation.
    +    *
    +    * This program is free software; you can redistribute it and/or modify
    +    * it under the terms of the GNU General Public License as published by
    +    * the Free Software Foundation; either version 2 of the License, or
    +    * (at your option) any later version.
    +    *
    +    */
    +   #include <asm/mach/arch.h>
    +   #include <asm/mach/map.h>
    +   
    +   #include <linux/dma-mapping.h>
    +   #include <linux/platform_device.h>
    +   #include <linux/i2c-gpio.h>
    +   
    +   #include <linux/fb.h>
    +   #include <video/atmel_lcdc.h>
    +   
    +   #include <mach/board.h>
    +   #include <mach/gpio.h>
    +   #include <mach/at91sam9g45.h>
    +   #include <mach/at91sam9g45_matrix.h>
    +   #include <mach/at91sam9_smc.h>
    +   #include <mach/at_hdmac.h>
    +   
    +   #include "generic.h"
    +   
    +   
    +   /* --------------------------------------------------------------------
    +    *  HDMAC - AHB DMA Controller
    +    * -------------------------------------------------------------------- */
    +   
    +   #if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
    +   static u64 hdmac_dmamask = DMA_BIT_MASK(32);
    +   
    +   static struct at_dma_platform_data atdma_pdata = {
    +           .nr_channels    = 8,
    +   };
    +   
    +   static struct resource hdmac_resources[] = {
    +           [0] = {
    +                   .start  = AT91_BASE_SYS + AT91_DMA,
    +                   .end    = AT91_BASE_SYS + AT91_DMA + SZ_512 - 1,
    +                   .flags  = IORESOURCE_MEM,
    +           },
    +           [2] = {
    +                   .start  = AT91SAM9G45_ID_DMA,
    +                   .end    = AT91SAM9G45_ID_DMA,
    +                   .flags  = IORESOURCE_IRQ,
    +           },
    +   };
    +   
    +   static struct platform_device at_hdmac_device = {
    +           .name           = "at_hdmac",
    +           .id             = -1,
    +           .dev            = {
    +                                   .dma_mask               = &hdmac_dmamask,
    +                                   .coherent_dma_mask      = DMA_BIT_MASK(32),
    +                                   .platform_data          = &atdma_pdata,
    +           },
    +           .resource       = hdmac_resources,
    +           .num_resources  = ARRAY_SIZE(hdmac_resources),
    +   };
    +   
    +   void __init at91_add_device_hdmac(void)
    +   {
    +           dma_cap_set(DMA_MEMCPY, atdma_pdata.cap_mask);
    +           dma_cap_set(DMA_SLAVE, atdma_pdata.cap_mask);
    +           platform_device_register(&at_hdmac_device);
    +   }
    +   #else
    +   void __init at91_add_device_hdmac(void) {}
    +   #endif
    +   
    +   
    +   /* --------------------------------------------------------------------
    +    *  USB Host (OHCI)
    +    * -------------------------------------------------------------------- */
    +   
    +   #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
    +   static u64 ohci_dmamask = DMA_BIT_MASK(32);
    +   static struct at91_usbh_data usbh_ohci_data;
    +   
    +   static struct resource usbh_ohci_resources[] = {
    +           [0] = {
    +                   .start  = AT91SAM9G45_OHCI_BASE,
    +                   .end    = AT91SAM9G45_OHCI_BASE + SZ_1M - 1,
    +                   .flags  = IORESOURCE_MEM,
    +           },
    +           [1] = {
    +                   .start  = AT91SAM9G45_ID_UHPHS,
    +                   .end    = AT91SAM9G45_ID_UHPHS,
    +                   .flags  = IORESOURCE_IRQ,
    +           },
    +   };
    +   
    +   static struct platform_device at91_usbh_ohci_device = {
    +           .name           = "at91_ohci",
    +           .id             = -1,
    +           .dev            = {
    +                                   .dma_mask               = &ohci_dmamask,
    +                                   .coherent_dma_mask      = DMA_BIT_MASK(32),
    +                                   .platform_data          = &usbh_ohci_data,
    +           },
    +           .resource       = usbh_ohci_resources,
    +           .num_resources  = ARRAY_SIZE(usbh_ohci_resources),
    +   };
    +   
    +   void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
    +   {
    +           int i;
    +   
    +           if (!data)
    +                   return;
    +   
    +           /* Enable VBus control for UHP ports */
    +           for (i = 0; i < data->ports; i++) {
    +                   if (data->vbus_pin[i])
    +                           at91_set_gpio_output(data->vbus_pin[i], 0);
    +           }
    +   
    +           usbh_ohci_data = *data;
    +           platform_device_register(&at91_usbh_ohci_device);
    +   }
    +   #else
    +   void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) {}
    +   #endif
    +   
    +   
    +   /* --------------------------------------------------------------------
+ ++++++ *  USB Host HS (EHCI)
+ ++++++ *  Needs an OHCI host for low and full speed management
+ ++++++ * -------------------------------------------------------------------- */
+ ++++++
+ ++++++#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
+ ++++++static u64 ehci_dmamask = DMA_BIT_MASK(32);
+ ++++++static struct at91_usbh_data usbh_ehci_data;
+ ++++++
+ ++++++static struct resource usbh_ehci_resources[] = {
+ ++++++        [0] = {
+ ++++++                .start  = AT91SAM9G45_EHCI_BASE,
+ ++++++                .end    = AT91SAM9G45_EHCI_BASE + SZ_1M - 1,
+ ++++++                .flags  = IORESOURCE_MEM,
+ ++++++        },
+ ++++++        [1] = {
+ ++++++                .start  = AT91SAM9G45_ID_UHPHS,
+ ++++++                .end    = AT91SAM9G45_ID_UHPHS,
+ ++++++                .flags  = IORESOURCE_IRQ,
+ ++++++        },
+ ++++++};
+ ++++++
+ ++++++static struct platform_device at91_usbh_ehci_device = {
+ ++++++        .name           = "atmel-ehci",
+ ++++++        .id             = -1,
+ ++++++        .dev            = {
+ ++++++                                .dma_mask               = &ehci_dmamask,
+ ++++++                                .coherent_dma_mask      = DMA_BIT_MASK(32),
+ ++++++                                .platform_data          = &usbh_ehci_data,
+ ++++++        },
+ ++++++        .resource       = usbh_ehci_resources,
+ ++++++        .num_resources  = ARRAY_SIZE(usbh_ehci_resources),
+ ++++++};
+ ++++++
+ ++++++void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data)
+ ++++++{
+ ++++++        int i;
+ ++++++
+ ++++++        if (!data)
+ ++++++                return;
+ ++++++
+ ++++++        /* Enable VBus control for UHP ports */
+ ++++++        for (i = 0; i < data->ports; i++) {
+ ++++++                if (data->vbus_pin[i])
+ ++++++                        at91_set_gpio_output(data->vbus_pin[i], 0);
+ ++++++        }
+ ++++++
+ ++++++        usbh_ehci_data = *data;
+ ++++++        at91_clock_associate("uhphs_clk", &at91_usbh_ehci_device.dev, "ehci_clk");
+ ++++++        platform_device_register(&at91_usbh_ehci_device);
+ ++++++}
+ ++++++#else
+ ++++++void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) {}
+ ++++++#endif
+ ++++++
+ ++++++
+ ++++++/* --------------------------------------------------------------------
    +    *  USB HS Device (Gadget)
    +    * -------------------------------------------------------------------- */
    +   
    +   #if defined(CONFIG_USB_GADGET_ATMEL_USBA) || defined(CONFIG_USB_GADGET_ATMEL_USBA_MODULE)
    +   static struct resource usba_udc_resources[] = {
    +           [0] = {
    +                   .start  = AT91SAM9G45_UDPHS_FIFO,
    +                   .end    = AT91SAM9G45_UDPHS_FIFO + SZ_512K - 1,
    +                   .flags  = IORESOURCE_MEM,
    +           },
    +           [1] = {
    +                   .start  = AT91SAM9G45_BASE_UDPHS,
    +                   .end    = AT91SAM9G45_BASE_UDPHS + SZ_1K - 1,
    +                   .flags  = IORESOURCE_MEM,
    +           },
    +           [2] = {
    +                   .start  = AT91SAM9G45_ID_UDPHS,
    +                   .end    = AT91SAM9G45_ID_UDPHS,
    +                   .flags  = IORESOURCE_IRQ,
    +           },
    +   };
    +   
    +   #define EP(nam, idx, maxpkt, maxbk, dma, isoc)                  \
    +           [idx] = {                                               \
    +                   .name           = nam,                          \
    +                   .index          = idx,                          \
    +                   .fifo_size      = maxpkt,                       \
    +                   .nr_banks       = maxbk,                        \
    +                   .can_dma        = dma,                          \
    +                   .can_isoc       = isoc,                         \
    +           }
    +   
    +   static struct usba_ep_data usba_udc_ep[] __initdata = {
    +           EP("ep0", 0, 64, 1, 0, 0),
    +           EP("ep1", 1, 1024, 2, 1, 1),
    +           EP("ep2", 2, 1024, 2, 1, 1),
    +           EP("ep3", 3, 1024, 3, 1, 0),
    +           EP("ep4", 4, 1024, 3, 1, 0),
    +           EP("ep5", 5, 1024, 3, 1, 1),
    +           EP("ep6", 6, 1024, 3, 1, 1),
    +   };
    +   
    +   #undef EP
    +   
    +   /*
    +    * pdata doesn't have room for any endpoints, so we need to
    +    * append room for the ones we need right after it.
    +    */
    +   static struct {
    +           struct usba_platform_data pdata;
    +           struct usba_ep_data ep[7];
    +   } usba_udc_data;
    +   
    +   static struct platform_device at91_usba_udc_device = {
    +           .name           = "atmel_usba_udc",
    +           .id             = -1,
    +           .dev            = {
    +                                   .platform_data  = &usba_udc_data.pdata,
    +           },
    +           .resource       = usba_udc_resources,
    +           .num_resources  = ARRAY_SIZE(usba_udc_resources),
    +   };
    +   
    +   void __init at91_add_device_usba(struct usba_platform_data *data)
    +   {
    +           usba_udc_data.pdata.vbus_pin = -EINVAL;
    +           usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
    +           memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));;
    +   
    +           if (data && data->vbus_pin > 0) {
    +                   at91_set_gpio_input(data->vbus_pin, 0);
    +                   at91_set_deglitch(data->vbus_pin, 1);
    +                   usba_udc_data.pdata.vbus_pin = data->vbus_pin;
    +           }
    +   
    +           /* Pullup pin is handled internally by USB device peripheral */
    +   
    +           /* Clocks */
    +           at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk");
    +           at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk");
    +   
    +           platform_device_register(&at91_usba_udc_device);
    +   }
    +   #else
    +   void __init at91_add_device_usba(struct usba_platform_data *data) {}
    +   #endif
    +   
    +   
    +   /* --------------------------------------------------------------------
    +    *  Ethernet
    +    * -------------------------------------------------------------------- */
    +   
    +   #if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
    +   static u64 eth_dmamask = DMA_BIT_MASK(32);
    +   static struct at91_eth_data eth_data;
    +   
    +   static struct resource eth_resources[] = {
    +           [0] = {
    +                   .start  = AT91SAM9G45_BASE_EMAC,
    +                   .end    = AT91SAM9G45_BASE_EMAC + SZ_16K - 1,
    +                   .flags  = IORESOURCE_MEM,
    +           },
    +           [1] = {
    +                   .start  = AT91SAM9G45_ID_EMAC,
    +                   .end    = AT91SAM9G45_ID_EMAC,
    +                   .flags  = IORESOURCE_IRQ,
    +           },
    +   };
    +   
    +   static struct platform_device at91sam9g45_eth_device = {
    +           .name           = "macb",
    +           .id             = -1,
    +           .dev            = {
    +                                   .dma_mask               = &eth_dmamask,
    +                                   .coherent_dma_mask      = DMA_BIT_MASK(32),
    +                                   .platform_data          = &eth_data,
    +           },
    +           .resource       = eth_resources,
    +           .num_resources  = ARRAY_SIZE(eth_resources),
    +   };
    +   
    +   void __init at91_add_device_eth(struct at91_eth_data *data)
    +   {
    +           if (!data)
    +                   return;
    +   
    +           if (data->phy_irq_pin) {
    +                   at91_set_gpio_input(data->phy_irq_pin, 0);
    +                   at91_set_deglitch(data->phy_irq_pin, 1);
    +           }
    +   
    +           /* Pins used for MII and RMII */
    +           at91_set_A_periph(AT91_PIN_PA17, 0);    /* ETXCK_EREFCK */
    +           at91_set_A_periph(AT91_PIN_PA15, 0);    /* ERXDV */
    +           at91_set_A_periph(AT91_PIN_PA12, 0);    /* ERX0 */
    +           at91_set_A_periph(AT91_PIN_PA13, 0);    /* ERX1 */
    +           at91_set_A_periph(AT91_PIN_PA16, 0);    /* ERXER */
    +           at91_set_A_periph(AT91_PIN_PA14, 0);    /* ETXEN */
    +           at91_set_A_periph(AT91_PIN_PA10, 0);    /* ETX0 */
    +           at91_set_A_periph(AT91_PIN_PA11, 0);    /* ETX1 */
    +           at91_set_A_periph(AT91_PIN_PA19, 0);    /* EMDIO */
    +           at91_set_A_periph(AT91_PIN_PA18, 0);    /* EMDC */
    +   
    +           if (!data->is_rmii) {
    +                   at91_set_B_periph(AT91_PIN_PA29, 0);    /* ECRS */
    +                   at91_set_B_periph(AT91_PIN_PA30, 0);    /* ECOL */
    +                   at91_set_B_periph(AT91_PIN_PA8,  0);    /* ERX2 */
    +                   at91_set_B_periph(AT91_PIN_PA9,  0);    /* ERX3 */
    +                   at91_set_B_periph(AT91_PIN_PA28, 0);    /* ERXCK */
    +                   at91_set_B_periph(AT91_PIN_PA6,  0);    /* ETX2 */
    +                   at91_set_B_periph(AT91_PIN_PA7,  0);    /* ETX3 */
    +                   at91_set_B_periph(AT91_PIN_PA27, 0);    /* ETXER */
    +           }
    +   
    +           eth_data = *data;
    +           platform_device_register(&at91sam9g45_eth_device);
    +   }
    +   #else
    +   void __init at91_add_device_eth(struct at91_eth_data *data) {}
    +   #endif
    +   
    +   
    +   /* --------------------------------------------------------------------
    +    *  NAND / SmartMedia
    +    * -------------------------------------------------------------------- */
    +   
    +   #if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
    +   static struct atmel_nand_data nand_data;
    +   
    +   #define NAND_BASE       AT91_CHIPSELECT_3
    +   
    +   static struct resource nand_resources[] = {
    +           [0] = {
    +                   .start  = NAND_BASE,
    +                   .end    = NAND_BASE + SZ_256M - 1,
    +                   .flags  = IORESOURCE_MEM,
    +           },
    +           [1] = {
    +                   .start  = AT91_BASE_SYS + AT91_ECC,
    +                   .end    = AT91_BASE_SYS + AT91_ECC + SZ_512 - 1,
    +                   .flags  = IORESOURCE_MEM,
    +           }
    +   };
    +   
    +   static struct platform_device at91sam9g45_nand_device = {
    +           .name           = "atmel_nand",
    +           .id             = -1,
    +           .dev            = {
    +                                   .platform_data  = &nand_data,
    +           },
    +           .resource       = nand_resources,
    +           .num_resources  = ARRAY_SIZE(nand_resources),
    +   };
    +   
    +   void __init at91_add_device_nand(struct atmel_nand_data *data)
    +   {
    +           unsigned long csa;
    +   
    +           if (!data)
    +                   return;
    +   
    +           csa = at91_sys_read(AT91_MATRIX_EBICSA);
    +           at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
    +   
    +           /* enable pin */
    +           if (data->enable_pin)
    +                   at91_set_gpio_output(data->enable_pin, 1);
    +   
    +           /* ready/busy pin */
    +           if (data->rdy_pin)
    +                   at91_set_gpio_input(data->rdy_pin, 1);
    +   
    +           /* card detect pin */
    +           if (data->det_pin)
    +                   at91_set_gpio_input(data->det_pin, 1);
    +   
    +           nand_data = *data;
    +           platform_device_register(&at91sam9g45_nand_device);
    +   }
    +   #else
    +   void __init at91_add_device_nand(struct atmel_nand_data *data) {}
    +   #endif
    +   
    +   
    +   /* --------------------------------------------------------------------
    +    *  TWI (i2c)
    +    * -------------------------------------------------------------------- */
    +   
    +   /*
    +    * Prefer the GPIO code since the TWI controller isn't robust
    +    * (gets overruns and underruns under load) and can only issue
    +    * repeated STARTs in one scenario (the driver doesn't yet handle them).
    +    */
    +   #if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
    +   static struct i2c_gpio_platform_data pdata_i2c0 = {
    +           .sda_pin                = AT91_PIN_PA20,
    +           .sda_is_open_drain      = 1,
    +           .scl_pin                = AT91_PIN_PA21,
    +           .scl_is_open_drain      = 1,
    +           .udelay                 = 2,            /* ~100 kHz */
    +   };
    +   
    +   static struct platform_device at91sam9g45_twi0_device = {
    +           .name                   = "i2c-gpio",
    +           .id                     = 0,
    +           .dev.platform_data      = &pdata_i2c0,
    +   };
    +   
    +   static struct i2c_gpio_platform_data pdata_i2c1 = {
    +           .sda_pin                = AT91_PIN_PB10,
    +           .sda_is_open_drain      = 1,
    +           .scl_pin                = AT91_PIN_PB11,
    +           .scl_is_open_drain      = 1,
    +           .udelay                 = 2,            /* ~100 kHz */
    +   };
    +   
    +   static struct platform_device at91sam9g45_twi1_device = {
    +           .name                   = "i2c-gpio",
    +           .id                     = 1,
    +           .dev.platform_data      = &pdata_i2c1,
    +   };
    +   
    +   void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
    +   {
    +           i2c_register_board_info(i2c_id, devices, nr_devices);
    +   
    +           if (i2c_id == 0) {
    +                   at91_set_GPIO_periph(AT91_PIN_PA20, 1);         /* TWD (SDA) */
    +                   at91_set_multi_drive(AT91_PIN_PA20, 1);
    +   
    +                   at91_set_GPIO_periph(AT91_PIN_PA21, 1);         /* TWCK (SCL) */
    +                   at91_set_multi_drive(AT91_PIN_PA21, 1);
    +   
    +                   platform_device_register(&at91sam9g45_twi0_device);
    +           } else {
    +                   at91_set_GPIO_periph(AT91_PIN_PB10, 1);         /* TWD (SDA) */
    +                   at91_set_multi_drive(AT91_PIN_PB10, 1);
    +   
    +                   at91_set_GPIO_periph(AT91_PIN_PB11, 1);         /* TWCK (SCL) */
    +                   at91_set_multi_drive(AT91_PIN_PB11, 1);
    +   
    +                   platform_device_register(&at91sam9g45_twi1_device);
    +           }
    +   }
    +   
    +   #elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
    +   static struct resource twi0_resources[] = {
    +           [0] = {
    +                   .start  = AT91SAM9G45_BASE_TWI0,
    +                   .end    = AT91SAM9G45_BASE_TWI0 + SZ_16K - 1,
    +                   .flags  = IORESOURCE_MEM,
    +           },
    +           [1] = {
    +                   .start  = AT91SAM9G45_ID_TWI0,
    +                   .end    = AT91SAM9G45_ID_TWI0,
    +                   .flags  = IORESOURCE_IRQ,
    +           },
    +   };
    +   
    +   static struct platform_device at91sam9g45_twi0_device = {
    +           .name           = "at91_i2c",
    +           .id             = 0,
    +           .resource       = twi0_resources,
    +           .num_resources  = ARRAY_SIZE(twi0_resources),
    +   };
    +   
    +   static struct resource twi1_resources[] = {
    +           [0] = {
    +                   .start  = AT91SAM9G45_BASE_TWI1,
    +                   .end    = AT91SAM9G45_BASE_TWI1 + SZ_16K - 1,
    +                   .flags  = IORESOURCE_MEM,
    +           },
    +           [1] = {
    +                   .start  = AT91SAM9G45_ID_TWI1,
    +                   .end    = AT91SAM9G45_ID_TWI1,
    +                   .flags  = IORESOURCE_IRQ,
    +           },
    +   };
    +   
    +   static struct platform_device at91sam9g45_twi1_device = {
    +           .name           = "at91_i2c",
    +           .id             = 1,
    +           .resource       = twi1_resources,
    +           .num_resources  = ARRAY_SIZE(twi1_resources),
    +   };
    +   
    +   void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
    +   {
    +           i2c_register_board_info(i2c_id, devices, nr_devices);
    +   
    +           /* pins used for TWI interface */
    +           if (i2c_id == 0) {
    +                   at91_set_A_periph(AT91_PIN_PA20, 0);            /* TWD */
    +                   at91_set_multi_drive(AT91_PIN_PA20, 1);
    +   
    +                   at91_set_A_periph(AT91_PIN_PA21, 0);            /* TWCK */
    +                   at91_set_multi_drive(AT91_PIN_PA21, 1);
    +   
    +                   platform_device_register(&at91sam9g45_twi0_device);
    +           } else {
    +                   at91_set_A_periph(AT91_PIN_PB10, 0);            /* TWD */
    +                   at91_set_multi_drive(AT91_PIN_PB10, 1);
    +   
    +                   at91_set_A_periph(AT91_PIN_PB11, 0);            /* TWCK */
    +                   at91_set_multi_drive(AT91_PIN_PB11, 1);
    +   
    +                   platform_device_register(&at91sam9g45_twi1_device);
    +           }
    +   }
    +   #else
    +   void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices) {}
    +   #endif
    +   
    +   
    +   /* --------------------------------------------------------------------
    +    *  SPI
    +    * -------------------------------------------------------------------- */
    +   
    +   #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
    +   static u64 spi_dmamask = DMA_BIT_MASK(32);
    +   
    +   static struct resource spi0_resources[] = {
    +           [0] = {
    +                   .start  = AT91SAM9G45_BASE_SPI0,
    +                   .end    = AT91SAM9G45_BASE_SPI0 + SZ_16K - 1,
    +                   .flags  = IORESOURCE_MEM,
    +           },
    +           [1] = {
    +                   .start  = AT91SAM9G45_ID_SPI0,
    +                   .end    = AT91SAM9G45_ID_SPI0,
    +                   .flags  = IORESOURCE_IRQ,
    +           },
    +   };
    +   
    +   static struct platform_device at91sam9g45_spi0_device = {
    +           .name           = "atmel_spi",
    +           .id             = 0,
    +           .dev            = {
    +                                   .dma_mask               = &spi_dmamask,
    +                                   .coherent_dma_mask      = DMA_BIT_MASK(32),
    +           },
    +           .resource       = spi0_resources,
    +           .num_resources  = ARRAY_SIZE(spi0_resources),
    +   };
    +   
    +   static const unsigned spi0_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PB18, AT91_PIN_PB19, AT91_PIN_PD27 };
    +   
    +   static struct resource spi1_resources[] = {
    +           [0] = {
    +                   .start  = AT91SAM9G45_BASE_SPI1,
    +                   .end    = AT91SAM9G45_BASE_SPI1 + SZ_16K - 1,
    +                   .flags  = IORESOURCE_MEM,
    +           },
    +           [1] = {
    +                   .start  = AT91SAM9G45_ID_SPI1,
    +                   .end    = AT91SAM9G45_ID_SPI1,
    +                   .flags  = IORESOURCE_IRQ,
    +           },
    +   };
    +   
    +   static struct platform_device at91sam9g45_spi1_device = {
    +           .name           = "atmel_spi",
    +           .id             = 1,
    +           .dev            = {
    +                                   .dma_mask               = &spi_dmamask,
    +                                   .coherent_dma_mask      = DMA_BIT_MASK(32),
    +           },
    +           .resource       = spi1_resources,
    +           .num_resources  = ARRAY_SIZE(spi1_resources),
    +   };
    +   
    +   static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB17, AT91_PIN_PD28, AT91_PIN_PD18, AT91_PIN_PD19 };
    +   
    +   void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
    +   {
    +           int i;
    +           unsigned long cs_pin;
    +           short enable_spi0 = 0;
    +           short enable_spi1 = 0;
    +   
    +           /* Choose SPI chip-selects */
    +           for (i = 0; i < nr_devices; i++) {
    +                   if (devices[i].controller_data)
    +                           cs_pin = (unsigned long) devices[i].controller_data;
    +                   else if (devices[i].bus_num == 0)
    +                           cs_pin = spi0_standard_cs[devices[i].chip_select];
    +                   else
    +                           cs_pin = spi1_standard_cs[devices[i].chip_select];
    +   
    +                   if (devices[i].bus_num == 0)
    +                           enable_spi0 = 1;
    +                   else
    +                           enable_spi1 = 1;
    +   
    +                   /* enable chip-select pin */
    +                   at91_set_gpio_output(cs_pin, 1);
    +   
    +                   /* pass chip-select pin to driver */
    +                   devices[i].controller_data = (void *) cs_pin;
    +           }
    +   
    +           spi_register_board_info(devices, nr_devices);
    +   
    +           /* Configure SPI bus(es) */
    +           if (enable_spi0) {
    +                   at91_set_A_periph(AT91_PIN_PB0, 0);     /* SPI0_MISO */
    +                   at91_set_A_periph(AT91_PIN_PB1, 0);     /* SPI0_MOSI */
    +                   at91_set_A_periph(AT91_PIN_PB2, 0);     /* SPI0_SPCK */
    +   
    +                   at91_clock_associate("spi0_clk", &at91sam9g45_spi0_device.dev, "spi_clk");
    +                   platform_device_register(&at91sam9g45_spi0_device);
    +           }
    +           if (enable_spi1) {
    +                   at91_set_A_periph(AT91_PIN_PB14, 0);    /* SPI1_MISO */
    +                   at91_set_A_periph(AT91_PIN_PB15, 0);    /* SPI1_MOSI */
    +                   at91_set_A_periph(AT91_PIN_PB16, 0);    /* SPI1_SPCK */
    +   
    +                   at91_clock_associate("spi1_clk", &at91sam9g45_spi1_device.dev, "spi_clk");
    +                   platform_device_register(&at91sam9g45_spi1_device);
    +           }
    +   }
    +   #else
    +   void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
    +   #endif
    +   
    +   
    +   /* --------------------------------------------------------------------
    +    *  AC97
    +    * -------------------------------------------------------------------- */
    +   
    +   #if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
    +   static u64 ac97_dmamask = DMA_BIT_MASK(32);
    +   static struct ac97c_platform_data ac97_data;
    +   
    +   static struct resource ac97_resources[] = {
    +           [0] = {
    +                   .start  = AT91SAM9G45_BASE_AC97C,
    +                   .end    = AT91SAM9G45_BASE_AC97C + SZ_16K - 1,
    +                   .flags  = IORESOURCE_MEM,
    +           },
    +           [1] = {
    +                   .start  = AT91SAM9G45_ID_AC97C,
    +                   .end    = AT91SAM9G45_ID_AC97C,
    +                   .flags  = IORESOURCE_IRQ,
    +           },
    +   };
    +   
    +   static struct platform_device at91sam9g45_ac97_device = {
    +           .name           = "atmel_ac97c",
    +           .id             = 0,
    +           .dev            = {
    +                                   .dma_mask               = &ac97_dmamask,
    +                                   .coherent_dma_mask      = DMA_BIT_MASK(32),
    +                                   .platform_data          = &ac97_data,
    +           },
    +           .resource       = ac97_resources,
    +           .num_resources  = ARRAY_SIZE(ac97_resources),
    +   };
    +   
    +   void __init at91_add_device_ac97(struct ac97c_platform_data *data)
    +   {
    +           if (!data)
    +                   return;
    +   
    +           at91_set_A_periph(AT91_PIN_PD8, 0);     /* AC97FS */
    +           at91_set_A_periph(AT91_PIN_PD9, 0);     /* AC97CK */
    +           at91_set_A_periph(AT91_PIN_PD7, 0);     /* AC97TX */
    +           at91_set_A_periph(AT91_PIN_PD6, 0);     /* AC97RX */
    +   
    +           /* reset */
    +           if (data->reset_pin)
    +                   at91_set_gpio_output(data->reset_pin, 0);
    +   
    +           ac97_data = *data;
    +           platform_device_register(&at91sam9g45_ac97_device);
    +   }
    +   #else
    +   void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
    +   #endif
    +   
    +   
    +   /* --------------------------------------------------------------------
    +    *  LCD Controller
    +    * -------------------------------------------------------------------- */
    +   
    +   #if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
    +   static u64 lcdc_dmamask = DMA_BIT_MASK(32);
    +   static struct atmel_lcdfb_info lcdc_data;
    +   
    +   static struct resource lcdc_resources[] = {
    +           [0] = {
    +                   .start  = AT91SAM9G45_LCDC_BASE,
    +                   .end    = AT91SAM9G45_LCDC_BASE + SZ_4K - 1,
    +                   .flags  = IORESOURCE_MEM,
    +           },
    +           [1] = {
    +                   .start  = AT91SAM9G45_ID_LCDC,
    +                   .end    = AT91SAM9G45_ID_LCDC,
    +                   .flags  = IORESOURCE_IRQ,
    +           },
    +   };
    +   
    +   static struct platform_device at91_lcdc_device = {
    +           .name           = "atmel_lcdfb",
    +           .id             = 0,
    +           .dev            = {
    +                                   .dma_mask               = &lcdc_dmamask,
    +                                   .coherent_dma_mask      = DMA_BIT_MASK(32),
    +                                   .platform_data          = &lcdc_data,
    +           },
    +           .resource       = lcdc_resources,
    +           .num_resources  = ARRAY_SIZE(lcdc_resources),
    +   };
    +   
    +   void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data)
    +   {
    +           if (!data)
    +                   return;
    +   
    +           at91_set_A_periph(AT91_PIN_PE0, 0);     /* LCDDPWR */
    +   
    +           at91_set_A_periph(AT91_PIN_PE2, 0);     /* LCDCC */
    +           at91_set_A_periph(AT91_PIN_PE3, 0);     /* LCDVSYNC */
    +           at91_set_A_periph(AT91_PIN_PE4, 0);     /* LCDHSYNC */
    +           at91_set_A_periph(AT91_PIN_PE5, 0);     /* LCDDOTCK */
    +           at91_set_A_periph(AT91_PIN_PE6, 0);     /* LCDDEN */
    +           at91_set_A_periph(AT91_PIN_PE7, 0);     /* LCDD0 */
    +           at91_set_A_periph(AT91_PIN_PE8, 0);     /* LCDD1 */
    +           at91_set_A_periph(AT91_PIN_PE9, 0);     /* LCDD2 */
    +           at91_set_A_periph(AT91_PIN_PE10, 0);    /* LCDD3 */
    +           at91_set_A_periph(AT91_PIN_PE11, 0);    /* LCDD4 */
    +           at91_set_A_periph(AT91_PIN_PE12, 0);    /* LCDD5 */
    +           at91_set_A_periph(AT91_PIN_PE13, 0);    /* LCDD6 */
    +           at91_set_A_periph(AT91_PIN_PE14, 0);    /* LCDD7 */
    +           at91_set_A_periph(AT91_PIN_PE15, 0);    /* LCDD8 */
    +           at91_set_A_periph(AT91_PIN_PE16, 0);    /* LCDD9 */
    +           at91_set_A_periph(AT91_PIN_PE17, 0);    /* LCDD10 */
    +           at91_set_A_periph(AT91_PIN_PE18, 0);    /* LCDD11 */
    +           at91_set_A_periph(AT91_PIN_PE19, 0);    /* LCDD12 */
    +           at91_set_A_periph(AT91_PIN_PE20, 0);    /* LCDD13 */
    +           at91_set_A_periph(AT91_PIN_PE21, 0);    /* LCDD14 */
    +           at91_set_A_periph(AT91_PIN_PE22, 0);    /* LCDD15 */
    +           at91_set_A_periph(AT91_PIN_PE23, 0);    /* LCDD16 */
    +           at91_set_A_periph(AT91_PIN_PE24, 0);    /* LCDD17 */
    +           at91_set_A_periph(AT91_PIN_PE25, 0);    /* LCDD18 */
    +           at91_set_A_periph(AT91_PIN_PE26, 0);    /* LCDD19 */
    +           at91_set_A_periph(AT91_PIN_PE27, 0);    /* LCDD20 */
    +           at91_set_A_periph(AT91_PIN_PE28, 0);    /* LCDD21 */
    +           at91_set_A_periph(AT91_PIN_PE29, 0);    /* LCDD22 */
    +           at91_set_A_periph(AT91_PIN_PE30, 0);    /* LCDD23 */
    +   
    +           lcdc_data = *data;
    +           platform_device_register(&at91_lcdc_device);
    +   }
    +   #else
    +   void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) {}
    +   #endif
    +   
    +   
    +   /* --------------------------------------------------------------------
    +    *  Timer/Counter block
    +    * -------------------------------------------------------------------- */
    +   
    +   #ifdef CONFIG_ATMEL_TCLIB
    +   static struct resource tcb0_resources[] = {
    +           [0] = {
    +                   .start  = AT91SAM9G45_BASE_TCB0,
    +                   .end    = AT91SAM9G45_BASE_TCB0 + SZ_16K - 1,
    +                   .flags  = IORESOURCE_MEM,
    +           },
    +           [1] = {
    +                   .start  = AT91SAM9G45_ID_TCB,
    +                   .end    = AT91SAM9G45_ID_TCB,
    +                   .flags  = IORESOURCE_IRQ,
    +           },
    +   };
    +   
    +   static struct platform_device at91sam9g45_tcb0_device = {
    +           .name           = "atmel_tcb",
    +           .id             = 0,
    +           .resource       = tcb0_resources,
    +           .num_resources  = ARRAY_SIZE(tcb0_resources),
    +   };
    +   
    +   /* TCB1 begins with TC3 */
    +   static struct resource tcb1_resources[] = {
    +           [0] = {
    +                   .start  = AT91SAM9G45_BASE_TCB1,
    +                   .end    = AT91SAM9G45_BASE_TCB1 + SZ_16K - 1,
    +                   .flags  = IORESOURCE_MEM,
    +           },
    +           [1] = {
    +                   .start  = AT91SAM9G45_ID_TCB,
    +                   .end    = AT91SAM9G45_ID_TCB,
    +                   .flags  = IORESOURCE_IRQ,
    +           },
    +   };
    +   
    +   static struct platform_device at91sam9g45_tcb1_device = {
    +           .name           = "atmel_tcb",
    +           .id             = 1,
    +           .resource       = tcb1_resources,
    +           .num_resources  = ARRAY_SIZE(tcb1_resources),
    +   };
    +   
    +   static void __init at91_add_device_tc(void)
    +   {
    +           /* this chip has one clock and irq for all six TC channels */
    +           at91_clock_associate("tcb_clk", &at91sam9g45_tcb0_device.dev, "t0_clk");
    +           platform_device_register(&at91sam9g45_tcb0_device);
    +           at91_clock_associate("tcb_clk", &at91sam9g45_tcb1_device.dev, "t0_clk");
    +           platform_device_register(&at91sam9g45_tcb1_device);
    +   }
    +   #else
    +   static void __init at91_add_device_tc(void) { }
    +   #endif
    +   
    +   
    +   /* --------------------------------------------------------------------
    +    *  RTC
    +    * -------------------------------------------------------------------- */
    +   
    +   #if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
    +   static struct platform_device at91sam9g45_rtc_device = {
    +           .name           = "at91_rtc",
    +           .id             = -1,
    +           .num_resources  = 0,
    +   };
    +   
    +   static void __init at91_add_device_rtc(void)
    +   {
    +           platform_device_register(&at91sam9g45_rtc_device);
    +   }
    +   #else
    +   static void __init at91_add_device_rtc(void) {}
    +   #endif
    +   
    +   
    +   /* --------------------------------------------------------------------
    +    *  RTT
    +    * -------------------------------------------------------------------- */
    +   
    +   static struct resource rtt_resources[] = {
    +           {
    +                   .start  = AT91_BASE_SYS + AT91_RTT,
    +                   .end    = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1,
    +                   .flags  = IORESOURCE_MEM,
    +           }
    +   };
    +   
    +   static struct platform_device at91sam9g45_rtt_device = {
    +           .name           = "at91_rtt",
    +           .id             = 0,
    +           .resource       = rtt_resources,
    +           .num_resources  = ARRAY_SIZE(rtt_resources),
    +   };
    +   
    +   static void __init at91_add_device_rtt(void)
    +   {
    +           platform_device_register(&at91sam9g45_rtt_device);
    +   }
    +   
    +   
    +   /* --------------------------------------------------------------------
    +    *  Watchdog
    +    * -------------------------------------------------------------------- */
    +   
 +  + + #if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
    +   static struct platform_device at91sam9g45_wdt_device = {
    +           .name           = "at91_wdt",
    +           .id             = -1,
    +           .num_resources  = 0,
    +   };
    +   
    +   static void __init at91_add_device_watchdog(void)
    +   {
    +           platform_device_register(&at91sam9g45_wdt_device);
    +   }
    +   #else
    +   static void __init at91_add_device_watchdog(void) {}
    +   #endif
    +   
    +   
    +   /* --------------------------------------------------------------------
    +    *  PWM
    +    * --------------------------------------------------------------------*/
    +   
    +   #if defined(CONFIG_ATMEL_PWM) || defined(CONFIG_ATMEL_PWM_MODULE)
    +   static u32 pwm_mask;
    +   
    +   static struct resource pwm_resources[] = {
    +           [0] = {
    +                   .start  = AT91SAM9G45_BASE_PWMC,
    +                   .end    = AT91SAM9G45_BASE_PWMC + SZ_16K - 1,
    +                   .flags  = IORESOURCE_MEM,
    +           },
    +           [1] = {
    +                   .start  = AT91SAM9G45_ID_PWMC,
    +                   .end    = AT91SAM9G45_ID_PWMC,
    +                   .flags  = IORESOURCE_IRQ,
    +           },
    +   };
    +   
    +   static struct platform_device at91sam9g45_pwm0_device = {
    +           .name   = "atmel_pwm",
    +           .id     = -1,
    +           .dev    = {
    +                   .platform_data          = &pwm_mask,
    +           },
    +           .resource       = pwm_resources,
    +           .num_resources  = ARRAY_SIZE(pwm_resources),
    +   };
    +   
    +   void __init at91_add_device_pwm(u32 mask)
    +   {
    +           if (mask & (1 << AT91_PWM0))
    +                   at91_set_B_periph(AT91_PIN_PD24, 1);    /* enable PWM0 */
    +   
    +           if (mask & (1 << AT91_PWM1))
    +                   at91_set_B_periph(AT91_PIN_PD31, 1);    /* enable PWM1 */
    +   
    +           if (mask & (1 << AT91_PWM2))
    +                   at91_set_B_periph(AT91_PIN_PD26, 1);    /* enable PWM2 */
    +   
    +           if (mask & (1 << AT91_PWM3))
    +                   at91_set_B_periph(AT91_PIN_PD0, 1);     /* enable PWM3 */
    +   
    +           pwm_mask = mask;
    +   
    +           platform_device_register(&at91sam9g45_pwm0_device);
    +   }
    +   #else
    +   void __init at91_add_device_pwm(u32 mask) {}
    +   #endif
    +   
    +   
    +   /* --------------------------------------------------------------------
    +    *  SSC -- Synchronous Serial Controller
    +    * -------------------------------------------------------------------- */
    +   
    +   #if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
    +   static u64 ssc0_dmamask = DMA_BIT_MASK(32);
    +   
    +   static struct resource ssc0_resources[] = {
    +           [0] = {
    +                   .start  = AT91SAM9G45_BASE_SSC0,
    +                   .end    = AT91SAM9G45_BASE_SSC0 + SZ_16K - 1,
    +                   .flags  = IORESOURCE_MEM,
    +           },
    +           [1] = {
    +                   .start  = AT91SAM9G45_ID_SSC0,
    +                   .end    = AT91SAM9G45_ID_SSC0,
    +                   .flags  = IORESOURCE_IRQ,
    +           },
    +   };
    +   
    +   static struct platform_device at91sam9g45_ssc0_device = {
    +           .name   = "ssc",
    +           .id     = 0,
    +           .dev    = {
    +                   .dma_mask               = &ssc0_dmamask,
    +                   .coherent_dma_mask      = DMA_BIT_MASK(32),
    +           },
    +           .resource       = ssc0_resources,
    +           .num_resources  = ARRAY_SIZE(ssc0_resources),
    +   };
    +   
    +   static inline void configure_ssc0_pins(unsigned pins)
    +   {
    +           if (pins & ATMEL_SSC_TF)
    +                   at91_set_A_periph(AT91_PIN_PD1, 1);
    +           if (pins & ATMEL_SSC_TK)
    +                   at91_set_A_periph(AT91_PIN_PD0, 1);
    +           if (pins & ATMEL_SSC_TD)
    +                   at91_set_A_periph(AT91_PIN_PD2, 1);
    +           if (pins & ATMEL_SSC_RD)
    +                   at91_set_A_periph(AT91_PIN_PD3, 1);
    +           if (pins & ATMEL_SSC_RK)
    +                   at91_set_A_periph(AT91_PIN_PD4, 1);
    +           if (pins & ATMEL_SSC_RF)
    +                   at91_set_A_periph(AT91_PIN_PD5, 1);
    +   }
    +   
    +   static u64 ssc1_dmamask = DMA_BIT_MASK(32);
    +   
    +   static struct resource ssc1_resources[] = {
    +           [0] = {
    +                   .start  = AT91SAM9G45_BASE_SSC1,
    +                   .end    = AT91SAM9G45_BASE_SSC1 + SZ_16K - 1,
    +                   .flags  = IORESOURCE_MEM,
    +           },
    +           [1] = {
    +                   .start  = AT91SAM9G45_ID_SSC1,
    +                   .end    = AT91SAM9G45_ID_SSC1,
    +                   .flags  = IORESOURCE_IRQ,
    +           },
    +   };
    +   
    +   static struct platform_device at91sam9g45_ssc1_device = {
    +           .name   = "ssc",
    +           .id     = 1,
    +           .dev    = {
    +                   .dma_mask               = &ssc1_dmamask,
    +                   .coherent_dma_mask      = DMA_BIT_MASK(32),
    +           },
    +           .resource       = ssc1_resources,
    +           .num_resources  = ARRAY_SIZE(ssc1_resources),
    +   };
    +   
    +   static inline void configure_ssc1_pins(unsigned pins)
    +   {
    +           if (pins & ATMEL_SSC_TF)
    +                   at91_set_A_periph(AT91_PIN_PD14, 1);
    +           if (pins & ATMEL_SSC_TK)
    +                   at91_set_A_periph(AT91_PIN_PD12, 1);
    +           if (pins & ATMEL_SSC_TD)
    +                   at91_set_A_periph(AT91_PIN_PD10, 1);
    +           if (pins & ATMEL_SSC_RD)
    +                   at91_set_A_periph(AT91_PIN_PD11, 1);
    +           if (pins & ATMEL_SSC_RK)
    +                   at91_set_A_periph(AT91_PIN_PD13, 1);
    +           if (pins & ATMEL_SSC_RF)
    +                   at91_set_A_periph(AT91_PIN_PD15, 1);
    +   }
    +   
    +   /*
    +    * SSC controllers are accessed through library code, instead of any
    +    * kind of all-singing/all-dancing driver.  For example one could be
    +    * used by a particular I2S audio codec's driver, while another one
    +    * on the same system might be used by a custom data capture driver.
    +    */
    +   void __init at91_add_device_ssc(unsigned id, unsigned pins)
    +   {
    +           struct platform_device *pdev;
    +   
    +           /*
    +            * NOTE: caller is responsible for passing information matching
    +            * "pins" to whatever will be using each particular controller.
    +            */
    +           switch (id) {
    +           case AT91SAM9G45_ID_SSC0:
    +                   pdev = &at91sam9g45_ssc0_device;
    +                   configure_ssc0_pins(pins);
    +                   at91_clock_associate("ssc0_clk", &pdev->dev, "pclk");
    +                   break;
    +           case AT91SAM9G45_ID_SSC1:
    +                   pdev = &at91sam9g45_ssc1_device;
    +                   configure_ssc1_pins(pins);
    +                   at91_clock_associate("ssc1_clk", &pdev->dev, "pclk");
    +                   break;
    +           default:
    +                   return;
    +           }
    +   
    +           platform_device_register(pdev);
    +   }
    +   
    +   #else
    +   void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
    +   #endif
    +   
    +   
    +   /* --------------------------------------------------------------------
    +    *  UART
    +    * -------------------------------------------------------------------- */
    +   
    +   #if defined(CONFIG_SERIAL_ATMEL)
    +   static struct resource dbgu_resources[] = {
    +           [0] = {
    +                   .start  = AT91_VA_BASE_SYS + AT91_DBGU,
    +                   .end    = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1,
    +                   .flags  = IORESOURCE_MEM,
    +           },
    +           [1] = {
    +                   .start  = AT91_ID_SYS,
    +                   .end    = AT91_ID_SYS,
    +                   .flags  = IORESOURCE_IRQ,
    +           },
    +   };
    +   
    +   static struct atmel_uart_data dbgu_data = {
    +           .use_dma_tx     = 0,
    +           .use_dma_rx     = 0,
    +           .regs           = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU),
    +   };
    +   
    +   static u64 dbgu_dmamask = DMA_BIT_MASK(32);
    +   
    +   static struct platform_device at91sam9g45_dbgu_device = {
    +           .name           = "atmel_usart",
    +           .id             = 0,
    +           .dev            = {
    +                                   .dma_mask               = &dbgu_dmamask,
    +                                   .coherent_dma_mask      = DMA_BIT_MASK(32),
    +                                   .platform_data          = &dbgu_data,
    +           },
    +           .resource       = dbgu_resources,
    +           .num_resources  = ARRAY_SIZE(dbgu_resources),
    +   };
    +   
    +   static inline void configure_dbgu_pins(void)
    +   {
    +           at91_set_A_periph(AT91_PIN_PB12, 0);            /* DRXD */
    +           at91_set_A_periph(AT91_PIN_PB13, 1);            /* DTXD */
    +   }
    +   
    +   static struct resource uart0_resources[] = {
    +           [0] = {
    +                   .start  = AT91SAM9G45_BASE_US0,
    +                   .end    = AT91SAM9G45_BASE_US0 + SZ_16K - 1,
    +                   .flags  = IORESOURCE_MEM,
    +           },
    +           [1] = {
    +                   .start  = AT91SAM9G45_ID_US0,
    +                   .end    = AT91SAM9G45_ID_US0,
    +                   .flags  = IORESOURCE_IRQ,
    +           },
    +   };
    +   
    +   static struct atmel_uart_data uart0_data = {
    +           .use_dma_tx     = 1,
    +           .use_dma_rx     = 1,
    +   };
    +   
    +   static u64 uart0_dmamask = DMA_BIT_MASK(32);
    +   
    +   static struct platform_device at91sam9g45_uart0_device = {
    +           .name           = "atmel_usart",
    +           .id             = 1,
    +           .dev            = {
    +                                   .dma_mask               = &uart0_dmamask,
    +                                   .coherent_dma_mask      = DMA_BIT_MASK(32),
    +                                   .platform_data          = &uart0_data,
    +           },
    +           .resource       = uart0_resources,
    +           .num_resources  = ARRAY_SIZE(uart0_resources),
    +   };
    +   
    +   static inline void configure_usart0_pins(unsigned pins)
    +   {
    +           at91_set_A_periph(AT91_PIN_PB19, 1);            /* TXD0 */
    +           at91_set_A_periph(AT91_PIN_PB18, 0);            /* RXD0 */
    +   
    +           if (pins & ATMEL_UART_RTS)
    +                   at91_set_B_periph(AT91_PIN_PB17, 0);    /* RTS0 */
    +           if (pins & ATMEL_UART_CTS)
    +                   at91_set_B_periph(AT91_PIN_PB15, 0);    /* CTS0 */
    +   }
    +   
    +   static struct resource uart1_resources[] = {
    +           [0] = {
    +                   .start  = AT91SAM9G45_BASE_US1,
    +                   .end    = AT91SAM9G45_BASE_US1 + SZ_16K - 1,
    +                   .flags  = IORESOURCE_MEM,
    +           },
    +           [1] = {
    +                   .start  = AT91SAM9G45_ID_US1,
    +                   .end    = AT91SAM9G45_ID_US1,
    +                   .flags  = IORESOURCE_IRQ,
    +           },
    +   };
    +   
    +   static struct atmel_uart_data uart1_data = {
    +           .use_dma_tx     = 1,
    +           .use_dma_rx     = 1,
    +   };
    +   
    +   static u64 uart1_dmamask = DMA_BIT_MASK(32);
    +   
    +   static struct platform_device at91sam9g45_uart1_device = {
    +           .name           = "atmel_usart",
    +           .id             = 2,
    +           .dev            = {
    +                                   .dma_mask               = &uart1_dmamask,
    +                                   .coherent_dma_mask      = DMA_BIT_MASK(32),
    +                                   .platform_data          = &uart1_data,
    +           },
    +           .resource       = uart1_resources,
    +           .num_resources  = ARRAY_SIZE(uart1_resources),
    +   };
    +   
    +   static inline void configure_usart1_pins(unsigned pins)
    +   {
    +           at91_set_A_periph(AT91_PIN_PB4, 1);             /* TXD1 */
    +           at91_set_A_periph(AT91_PIN_PB5, 0);             /* RXD1 */
    +   
    +           if (pins & ATMEL_UART_RTS)
    +                   at91_set_A_periph(AT91_PIN_PD16, 0);    /* RTS1 */
    +           if (pins & ATMEL_UART_CTS)
    +                   at91_set_A_periph(AT91_PIN_PD17, 0);    /* CTS1 */
    +   }
    +   
    +   static struct resource uart2_resources[] = {
    +           [0] = {
    +                   .start  = AT91SAM9G45_BASE_US2,
    +                   .end    = AT91SAM9G45_BASE_US2 + SZ_16K - 1,
    +                   .flags  = IORESOURCE_MEM,
    +           },
    +           [1] = {
    +                   .start  = AT91SAM9G45_ID_US2,
    +                   .end    = AT91SAM9G45_ID_US2,
    +                   .flags  = IORESOURCE_IRQ,
    +           },
    +   };
    +   
    +   static struct atmel_uart_data uart2_data = {
    +           .use_dma_tx     = 1,
    +           .use_dma_rx     = 1,
    +   };
    +   
    +   static u64 uart2_dmamask = DMA_BIT_MASK(32);
    +   
    +   static struct platform_device at91sam9g45_uart2_device = {
    +           .name           = "atmel_usart",
    +           .id             = 3,
    +           .dev            = {
    +                                   .dma_mask               = &uart2_dmamask,
    +                                   .coherent_dma_mask      = DMA_BIT_MASK(32),
    +                                   .platform_data          = &uart2_data,
    +           },
    +           .resource       = uart2_resources,
    +           .num_resources  = ARRAY_SIZE(uart2_resources),
    +   };
    +   
    +   static inline void configure_usart2_pins(unsigned pins)
    +   {
    +           at91_set_A_periph(AT91_PIN_PB6, 1);             /* TXD2 */
    +           at91_set_A_periph(AT91_PIN_PB7, 0);             /* RXD2 */
    +   
    +           if (pins & ATMEL_UART_RTS)
    +                   at91_set_B_periph(AT91_PIN_PC9, 0);     /* RTS2 */
    +           if (pins & ATMEL_UART_CTS)
    +                   at91_set_B_periph(AT91_PIN_PC11, 0);    /* CTS2 */
    +   }
    +   
    +   static struct resource uart3_resources[] = {
    +           [0] = {
    +                   .start  = AT91SAM9G45_BASE_US3,
    +                   .end    = AT91SAM9G45_BASE_US3 + SZ_16K - 1,
    +                   .flags  = IORESOURCE_MEM,
    +           },
    +           [1] = {
    +                   .start  = AT91SAM9G45_ID_US3,
    +                   .end    = AT91SAM9G45_ID_US3,
    +                   .flags  = IORESOURCE_IRQ,
    +           },
    +   };
    +   
    +   static struct atmel_uart_data uart3_data = {
    +           .use_dma_tx     = 1,
    +           .use_dma_rx     = 1,
    +   };
    +   
    +   static u64 uart3_dmamask = DMA_BIT_MASK(32);
    +   
    +   static struct platform_device at91sam9g45_uart3_device = {
    +           .name           = "atmel_usart",
    +           .id             = 4,
    +           .dev            = {
    +                                   .dma_mask               = &uart3_dmamask,
    +                                   .coherent_dma_mask      = DMA_BIT_MASK(32),
    +                                   .platform_data          = &uart3_data,
    +           },
    +           .resource       = uart3_resources,
    +           .num_resources  = ARRAY_SIZE(uart3_resources),
    +   };
    +   
    +   static inline void configure_usart3_pins(unsigned pins)
    +   {
    +           at91_set_A_periph(AT91_PIN_PB8, 1);             /* TXD3 */
    +           at91_set_A_periph(AT91_PIN_PB9, 0);             /* RXD3 */
    +   
    +           if (pins & ATMEL_UART_RTS)
    +                   at91_set_B_periph(AT91_PIN_PA23, 0);    /* RTS3 */
    +           if (pins & ATMEL_UART_CTS)
    +                   at91_set_B_periph(AT91_PIN_PA24, 0);    /* CTS3 */
    +   }
    +   
    +   static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];   /* the UARTs to use */
    +   struct platform_device *atmel_default_console_device;   /* the serial console device */
    +   
    +   void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
    +   {
    +           struct platform_device *pdev;
    +   
    +           switch (id) {
    +                   case 0:         /* DBGU */
    +                           pdev = &at91sam9g45_dbgu_device;
    +                           configure_dbgu_pins();
    +                           at91_clock_associate("mck", &pdev->dev, "usart");
    +                           break;
    +                   case AT91SAM9G45_ID_US0:
    +                           pdev = &at91sam9g45_uart0_device;
    +                           configure_usart0_pins(pins);
    +                           at91_clock_associate("usart0_clk", &pdev->dev, "usart");
    +                           break;
    +                   case AT91SAM9G45_ID_US1:
    +                           pdev = &at91sam9g45_uart1_device;
    +                           configure_usart1_pins(pins);
    +                           at91_clock_associate("usart1_clk", &pdev->dev, "usart");
    +                           break;
    +                   case AT91SAM9G45_ID_US2:
    +                           pdev = &at91sam9g45_uart2_device;
    +                           configure_usart2_pins(pins);
    +                           at91_clock_associate("usart2_clk", &pdev->dev, "usart");
    +                           break;
    +                   case AT91SAM9G45_ID_US3:
    +                           pdev = &at91sam9g45_uart3_device;
    +                           configure_usart3_pins(pins);
    +                           at91_clock_associate("usart3_clk", &pdev->dev, "usart");
    +                           break;
    +                   default:
    +                           return;
    +           }
    +           pdev->id = portnr;              /* update to mapped ID */
    +   
    +           if (portnr < ATMEL_MAX_UART)
    +                   at91_uarts[portnr] = pdev;
    +   }
    +   
    +   void __init at91_set_serial_console(unsigned portnr)
    +   {
    +           if (portnr < ATMEL_MAX_UART)
    +                   atmel_default_console_device = at91_uarts[portnr];
    +   }
    +   
    +   void __init at91_add_device_serial(void)
    +   {
    +           int i;
    +   
    +           for (i = 0; i < ATMEL_MAX_UART; i++) {
    +                   if (at91_uarts[i])
    +                           platform_device_register(at91_uarts[i]);
    +           }
    +   
    +           if (!atmel_default_console_device)
    +                   printk(KERN_INFO "AT91: No default serial console defined.\n");
    +   }
    +   #else
    +   void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
    +   void __init at91_set_serial_console(unsigned portnr) {}
    +   void __init at91_add_device_serial(void) {}
    +   #endif
    +   
    +   
    +   /* -------------------------------------------------------------------- */
    +   /*
    +    * These devices are always present and don't need any board-specific
    +    * setup.
    +    */
    +   static int __init at91_add_standard_devices(void)
    +   {
    +           at91_add_device_hdmac();
    +           at91_add_device_rtc();
    +           at91_add_device_rtt();
    +           at91_add_device_watchdog();
    +           at91_add_device_tc();
    +           return 0;
    +   }
    +   
    +   arch_initcall(at91_add_standard_devices);
@@@@@@@@@ -25,9 -25,7 -25,7 -25,9 -22,6 -25,9 -25,7 -25,7 +25,9 @@@@@@@@@ config INTEL_IOATDM
                depends on PCI && X86
                select DMA_ENGINE
                select DCA
    +           select ASYNC_TX_DISABLE_CHANNEL_SWITCH
 ++ + ++        select ASYNC_TX_DISABLE_PQ_VAL_DMA
 ++ + ++        select ASYNC_TX_DISABLE_XOR_VAL_DMA
                help
                  Enable support for the Intel(R) I/OAT DMA engine present
                  in recent Intel Xeon chipsets.
@@@@@@@@@ -52,14 -50,14 -50,14 -52,14 -46,6 -52,14 -50,14 -50,14 +52,14 @@@@@@@@@ config DW_DMA
                  Support the Synopsys DesignWare AHB DMA controller.  This
                  can be integrated in chips such as the Atmel AT32ap7000.
        
- -- ---        depends on ARCH_AT91SAM9RL
    +   config AT_HDMAC
    +           tristate "Atmel AHB DMA support"
+ ++++++        depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
    +           select DMA_ENGINE
    +           help
    +             Support the Atmel AHB DMA controller.  This can be integrated in
    +             chips such as the Atmel AT91SAM9RL.
    +   
        config FSL_DMA
                tristate "Freescale Elo and Elo Plus DMA support"
                depends on FSL_SOC