+2000-10-23 David B Anderson <davea@sgi.com>
+
+ * TODO: Correct spelling errors
+ * command.c (_initialize_command) corelow.c (core_open)
+ main.c (captured_command_loop) mips-tdep.c (mips32_next_pc)
+ remote.c serial.h top.c utils.c config/nm-lynx.h:
+ Correct spelling errors in comments
+
2000-10-22 Kevin Buettner <kevinb@redhat.com>
* sparc-nat.c (fetch_core_registers): Protoize.
* remote-utils.c (gr_multi_scan): Protoize.
* remote-vx.c (vx_xfer_memory, net_get_symbols): Protoize.
+>>>>>>> 1.717
2000-10-13 Fernando Nasser <fnasser@cygnus.com>
* remote.c (putpkt_binary): Call read_frame, not getpkt. Log message.
* rs6000-tdep.c (skip_prologue): Add new parameter lim_pc.
Update all callers.
+>>>>>>> 1.709
2000-10-03 Kevin Buettner <kevinb@redhat.com>
* remote-bug.c (bug_xfer_memory, bug_insert_breakpoint,
> stoping in weak functions.
>
> It stops in a function that is defined as weak, not in the function
-> that is actualy run...
+> that is actually run...
--
--
-Rely on BFD_BIG_ENDIAN and BFD_LITTLE_ENDIAN instead of host dependant
+Rely on BFD_BIG_ENDIAN and BFD_LITTLE_ENDIAN instead of host dependent
BIG_ENDIAN and LITTLE_ENDIAN.
--
Apart from the d30v, are there any sim/common simulators that make use
of this?
-A brief summary of what happended is that sim/common/sim-break.c was
+A brief summary of what happened is that sim/common/sim-break.c was
created as a good idea. It turned out a better idea was to use
SIM_SIGBREAK and have GDB pass back sim_resume (..., SIGBREAK).
``(gdb) catch signal SIGNAL''
-Overlaps with ``handle SIGNAL'' but the implied behavour is different.
+Overlaps with ``handle SIGNAL'' but the implied behavior is different.
You can attach commands to a catch but not a handle. A handle has a
limited number of hardwired actions.
If / when GDB starts to support the debugging of multi-processor
(rather than multi-thread) applications the symtab code will need to
-be updated a little so that several independant symbol tables are
+be updated a little so that several independent symbol tables are
active at a given time.
The other interesting change is a clarification of the exact meaning
construct a virtual frame-handle from the stack pointer and various
other bits of string.
-Unfortunatly GDB still treats this synthetic FP register as though it
+Unfortunately GDB still treats this synthetic FP register as though it
is real. That in turn really confuses users (arm and ``print $fp'' VS
``info registers fp''). The synthetic FP should be separated out of
the true register set presented to the user.
|
map random cache
bytes to target
- dependant i-face
+ dependent i-face
/|\
|
- target dependant
+ target dependent
such as [gG] packet
or ptrace buffer
o a mechanism that clearly separates the
gdb internal register cache from any
- target (not architecture) dependant
+ target (not architecture) dependent
specifics such as [gG] packets.
Of course, like anything, it sounds good in theory. In reality, it
The name is wrong for starters. ``target_signal'' should probably be
``gdb_signal''. ``from_host'' should be ``from_target_signal''.
-After that it needs to be multi-arched and made independant of any
+After that it needs to be multi-arched and made independent of any
host signal numbering.
--
--
-Make MI interface accessable from existing CLI.
+Make MI interface accessible from existing CLI.
--
open an asynchronous target that may need to perform background tasks
as part of the ``attach'' phase.
-Unfortunatly, due to limitations in the old/creaking command.h
+Unfortunately, due to limitations in the old/creaking command.h
interface, that isn't possible. The function being called isn't told
of the ``xxx'' or any other context information.
With no arguments, run an inferior shell.");
/* NOTE: cagney/2000-03-20: Being able to enter ``(gdb) !ls'' would
- be a really useful feature. Unfortunatly, the below wont do
+ be a really useful feature. Unfortunately, the below wont do
this. Instead it adds support for the form ``(gdb) ! ls''
(i.e. the space is required). If the ``!'' command below is
added the complains about no ``!'' command would be replaced by
extern int child_wait (int pid, struct target_waitstatus *status);
/* Lynx needs a special definition of this so that we can
- print out the pid and thread number seperatly. */
+ print out the pid and thread number seperately. */
/* override child_pid_to_str in inftarg.c */
siggy = bfd_core_file_failing_signal (core_bfd);
if (siggy > 0)
/* NOTE: target_signal_from_host() converts a target signal value
- into gdb's internal signal value. Unfortunatly gdb's internal
+ into gdb's internal signal value. Unfortunately gdb's internal
value is called ``target_signal'' and this function got the
name ..._from_host(). */
printf_filtered ("Program terminated with signal %d, %s.\n", siggy,
/* FIXME: cagney/1999-11-05: A correct command_loop() implementaton
would clean things up (restoring the cleanup chain) to the state
they were just prior to the call. Technically, this means that
- the do_cleanups() below is redundant. Unfortunatly, many FUNC's
+ the do_cleanups() below is redundant. Unfortunately, many FUNCs
are not that well behaved. do_cleanups should either be replaced
with a do_cleanups call (to cover the problem) or an assertion
check to detect bad FUNCs code. */
} /* mips32_next_pc */
/* Decoding the next place to set a breakpoint is irregular for the
- mips 16 variant, but fortunatly, there fewer instructions. We have to cope
+ mips 16 variant, but fortunately, there fewer instructions. We have to cope
ith extensions for 16 bit instructions and a pair of actual 32 bit instructions.
We dont want to set a single step instruction on the extend instruction
either.
/* FIXME: cagney/1999-09-23: During the initial connection it is
assumed that the target is already ready and able to respond to
- requests. Unfortunatly remote_start_remote() eventually calls
+ requests. Unfortunately remote_start_remote() eventually calls
wait_for_inferior() with no timeout. wait_forever_enabled_p gets
around this. Eventually a mechanism that allows
wait_for_inferior() to expect/get timeouts will be
enum serial_rc {
SERIAL_ERROR = -1, /* General error. */
SERIAL_TIMEOUT = -2, /* Timeout or data-not-ready during read.
- Unfortunatly, through ui_loop_hook(), this
+ Unfortunately, through ui_loop_hook(), this
can also be a QUIT indication. */
SERIAL_EOF = -3 /* General end-of-file or remote target
connection closed, indication. Includes
code also randomly used a SET_TOP_LEVEL macro that directly
initialize the longjmp buffers. */
-/* MAYBE: cagney/1999-11-05: Should the catch_erros and cleanups code
+/* MAYBE: cagney/1999-11-05: Should the catch_errors and cleanups code
be consolidated into a single file instead of being distributed
between utils.c and top.c? */
val = (*func) (args);
catch_return = saved_catch;
- /* FIXME: cagney/1999-11-05: A correct FUNC implementaton will
+ /* FIXME: cagney/1999-11-05: A correct FUNC implementation will
clean things up (restoring the cleanup chain) to the state they
- were just prior to the call. Unfortunatly, many FUNC's are not
+ were just prior to the call. Unfortunately, many FUNC's are not
that well behaved. This could be fixed by adding either a
do_cleanups call (to cover the problem) or an assertion check to
detect bad FUNCs code. */
/* FIXME: cagney/1999-11-07: Technically this do_cleanups() call
isn't needed. Instead an assertion check could be made that
simply confirmed that the called function correctly cleaned up
- after its self. Unfortunatly, old code (prior to 1999-11-04) in
+ after itself. Unfortunately, old code (prior to 1999-11-04) in
main.c was calling SET_TOP_LEVEL(), calling the command function,
and then *always* calling do_cleanups(). For the moment we
remain ``bug compatible'' with that old code.. */
char *err_string;
struct cleanup *err_string_cleanup;
/* FIXME: cagney/1999-11-10: All error calls should come here.
- Unfortunatly some code uses the sequence: error_begin(); print
+ Unfortunately some code uses the sequence: error_begin(); print
error message; return_to_top_level. That code should be
flushed. */
error_begin ();
projects / platform / upstream / binutils.git / commitdiff