#include <linux/platform_data/microchip-ksz.h>
#include <linux/phy.h>
#include <linux/if_bridge.h>
+#include <linux/if_vlan.h>
#include <net/dsa.h>
#include <net/switchdev.h>
bits, set ? bits : 0);
}
+static int ksz9477_change_mtu(struct dsa_switch *ds, int port, int mtu)
+{
+ struct ksz_device *dev = ds->priv;
+ u16 frame_size, max_frame = 0;
+ int i;
+
+ frame_size = mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
+
+ /* Cache the per-port MTU setting */
+ dev->ports[port].max_frame = frame_size;
+
+ for (i = 0; i < dev->port_cnt; i++)
+ max_frame = max(max_frame, dev->ports[i].max_frame);
+
+ return regmap_update_bits(dev->regmap[1], REG_SW_MTU__2,
+ REG_SW_MTU_MASK, max_frame);
+}
+
+static int ksz9477_max_mtu(struct dsa_switch *ds, int port)
+{
+ return KSZ9477_MAX_FRAME_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN;
+}
+
static int ksz9477_wait_vlan_ctrl_ready(struct ksz_device *dev)
{
unsigned int val;
/* Do not work correctly with tail tagging. */
ksz_cfg(dev, REG_SW_MAC_CTRL_0, SW_CHECK_LENGTH, false);
- /* accept packet up to 2000bytes */
- ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_LEGAL_PACKET_DISABLE, true);
+ /* Enable REG_SW_MTU__2 reg by setting SW_JUMBO_PACKET */
+ ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_JUMBO_PACKET, true);
+
+ /* Now we can configure default MTU value */
+ ret = regmap_update_bits(dev->regmap[1], REG_SW_MTU__2, REG_SW_MTU_MASK,
+ VLAN_ETH_FRAME_LEN + ETH_FCS_LEN);
+ if (ret)
+ return ret;
ksz9477_config_cpu_port(ds);
.port_mirror_add = ksz9477_port_mirror_add,
.port_mirror_del = ksz9477_port_mirror_del,
.get_stats64 = ksz9477_get_stats64,
+ .port_change_mtu = ksz9477_change_mtu,
+ .port_max_mtu = ksz9477_max_mtu,
};
static u32 ksz9477_get_port_addr(int port, int offset)